Kramer 401DXL Operation & User’s Manual

Text of Kramer 401DXL User Guide:

• Kramer 401DXL, KRAMER ELECTRONICS LTD. PN: 2900-009004 Kramer Electronics, Ltd. USER MANUAL Composite to Y/C Decoder/Switcher Model: 401D xl IMPORTANT : Before proceeding, please read paragraph entitled "Unpacking and Contents"

• Kramer 401DXL, Kramer Electronics Ltd. 2 Table Of Contents Section Name Page 1 INTRODUCTION 3 1.1 A Word on Format Interfaces 3 1.2 Factors Affecting Quality of Results 4 2 SPECIFICATIONS 4 3 HOW DO I GET STARTED? 5 4 UNPACKING AND CONTENTS 5 4.1 Optional Accessories 5 5 COMPOSITE TO Y/C DECODER / SWITCHER 6 5.1 Getting to Know your 401Dxl 6 6 INSTALLATION 7 6.1 Rack Munting 7 7. CONNECTING TO VIDEO DEVICES 7 8. USING THE MACHINE 7 8.1 Turning On the Machine 7 8.2 Composite / YC

• Kramer 401DXL, Kramer Electronics Ltd. 3 1 INTRODUCTION Congratulations on your purchase of this Kramer Electronics format interface. Since 1981, Kramer has been dedicated to the development and manufacture of high quality video/audio equipment. The Kramer line has become an integral part of many of the best production and presentation facilities around the world. In recent years, Kramer has redesigned and upgraded most of the line, making the best even better. Kramer’s line of professional v

• Kramer 401DXL, Kramer Electronics Ltd. 4 1.2 Factors Affecting Quality of Results There are many factors affecting the quality of results when signals are transmitted from a source to an acceptor as described in Table 1: Table 1: Factors Affecting Quality of Results FACTOR EFFECT Connection cables Low quality cables are susceptible to interference; they degrade signal quality due to poor matching and cause elevated noise levels. They should therefore be of the best quality. Sockets and connectors of the sources and acceptors So often ignored, they should

• Kramer Electronics Ltd. 5 3 HOW DO I GET STARTED? The fastest way to get started is to take your time and do everything right the first time. Taking 15 minutes to read the manual may save you a few hours later. You don’t even have to read the whole manual. If a section doesn’t apply to you, you don’t have to spend your time reading it. 4 UNPACKING AND

• Kramer Electronics Ltd. 6 5 COMPOSITE TO Y/C DECODER / SWITCHER This section describes all the controls and connections of your composite to Y/C decoder/switcher. Understanding the controls and connections helps you realize the full power of your machine. 5.1 Getting to Know Your 401D xl The Kramer 401Dxl is a high quality decoder/switcher designed to

• Kramer 401DXL, Kramer Electronics Ltd. 7 6 INSTALLATION 6.1 Rack Mounting The Kramer 401Dxl may be rack mounted in a standard 19” (1U) EIA rack assembly, using a special TOOLS Adapter (1U or 3U) and two mounting brackets (see section 4.1). They can be also table mounted using the mounting brackets provided. These devices do not require any specific spacing above or below the unit for ventilation. To mount any of the machines, follow the installation instructions enclosed with the machine. 7 CONNECTING TO VIDEO DEVICES Video sources and output devices (such as monitors, projectors or recorders) may be connected to th

• Kramer 401DXL, Kramer Electronics Ltd. 8 Figure 2: Interfacing and Switching Between Two Video Formats 10 TAKING CARE OF YOUR MACHINE Do not locate your machine in an environment where it is susceptible to dust or moisture. Both of these may damage the electronics, and cause erratic operation or failure. Do not locate your machine where temperature and humidity may be excessive. Doing so may also damage the electronics, and cause erratic operation or failure of your machine. Do not clean your machine with abrasives or s

• Kramer 401DXL, Kramer Electronics Ltd. 9 11 TROUBLESHOOTING NOTES Please note that if the output signal is disturbed or interrupted by very strong external electromagnetic interference, it should return and stabilize when such interference ends. If not, turn the power switch off and on again to reset the machine. If the following recommended actions do not result in satisfactory operation, please consult your KRAMER Dealer. 11.1 Power and Indicators Problem Remedy No Power 1. Confirm that power connections are secured at the machine and at the receptacle. Make sure the receptacle is active, outputting the proper voltage. 2. If there is still no powe

• Kramer 401DXL, Kramer Electronics Ltd. 10 LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for three years from the date of the first customer purchase. WHO IS PROTECTED Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1) Any product which is not distributed by Kramer, or which is not purchased from

• Kramer 401DXL, Kramer Electronics Ltd. 11 LIMITATION OF IMPLIED WARRANTIES All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty. EXCLUSION OF DAMAGES Kramer’s liability for any defective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1) Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss; or: 2) Any other da

• Kramer 401DXL, Kramer Electronics Ltd. 3 Am VeOlamo Street. Jerusalem 95463, Israel Tel: (972-2)-654-4000. Fax: (972-2)-653-5369 e-mail: [email protected] The list of Kramer distributors appears on our web site: www.kramerelectronics.com From the web site it is also possible to e-mail factory headquarters. We welcome your questions, comments and feedback.

Related Products and Documents (Marine Radio):

Comparable Devices:

Similar Resources:

• TQ KTX2-F (74 pages) TO Av¡at¡onEASA.AP445KTX2-F.01 00MANKTX2-F.0001MANOperation and lnstallation ManualDoc.-No.lssue:ECR-No.Date:MoC:KTX2-F.A-MAN0001KTX2.F.A-ECR.O2042019-07-030Document ReleaselFunctionNameÐateSignaturePrepared byChecked byThomas WähnerFlorian Holzner2019-07-03/,2019-07-03iVw,1,,-ázApproved by Thomas Eilers 2019-07-03KTX2-F.A-MAN.0001.docx Page 1 of74@ …

• poly-planar GSMR30 (18 pages) GSMR30 OWNER’S MANUAL MP4/MP3/Photo Playback Gauge Series Marine Radio FEATURES • 4 Channel • Full Range, Class A/B • 45W x 4 @ 4Ω • IPX5 Water proof INPUTS AND OUTPUTS • Bluetooth Audio Streaming • Easy Pairing with Auto Reconnect • AUX-In • USB-In for Music, Movie and Photo • 18 Preset AM/FM Stations • Compatible …

• Simplex 4100ES (8 pages) Features Emergency voice/alarm communications provide:  Alarm/evacuation signal generation with multiple built-in tones  Standard or customized digital message storage and message generation  Automatic or manual operation  Mass Notification operation Multiple channels are available:  Analog audio systems provide dual channel operation � …

• Garmin GTX 330 Mode S (8 pages) P/N 11934-S28 1 of 8Cirrus Design Section 9SR20 SupplementsPilot’s Operating Handbook andFAA Approved Airplane Flight ManualSupplementforGarmin GTX 330 Mode S TransponderWhen a Garmin GTX 330 Transponder is installed in the Cirrus DesignSR20, this Supplement is applicable and must be inserted in theSupplements Section (Section 9) of the Cirrus Design SR20 …

• Mylaps FLEX (2 pages) General Usage InstructionsFor MYLAPS FLEX TranspondersENGLISHACTIVATIONYour transponder is INACTIVE when shipped to you. Please refer to the quick start guide for information on how to activate your MYLAPS FLEX Transponder. A rapidly ashing red light on the transponder means that it is currently INACTIVE and must be activated with the FLEX M …

• Radio Shack BTX-124 (16 pages) Cat. No. 19-1205OWNER’S MANUALPlease read before using this equipment.BTX-124VHF FM Business Band Transceiverwith CTCSS19-1205.fm Page 1 Tuesday, August 3, 1999 10:30 AM …

Comments, Questions and Opinions: