Manualios.com

Kramer VP-720DS Operation & User’s Manual

Kramer VP-720DS Manual Online:

3.3, 1659 votes
Kramer VP-720DS User Manual
Kramer VP-720DS User Guide
Kramer VP-720DS Online Manual

Text of Kramer VP-720DS User Guide:

  • Kramer VP-720DS, Understanding the Seamless Switcher / Scaler 15 6.2.4 Resizing the PIP To resize the PIP (1/4, 1/9, 1/16, 1/25 or split screen): • When the Source Prompt is ON and the PIP is enclosed by an orange frame, use the Up and/or Down navigation control keys on the infra-red remote control transmitter (see Figure 49) or the UP and/or DOWN front panel OSD buttons • Use the OSD Menu buttons (see Figure 37) 6.2.5 Moving the Position of the PIP To move the location of the PIP: • When the Source Prompt is OFF, use the four navigation control keys (see Figure 25) on the infra-red remote con

  • KRAMER: SIMPLE CREATIVE TECHNOLOGY Technical Specifications 36 7.4 Upgrading Firmware To install the latest Kramer firmware version on a VP-720DS/VP-723DS unit, connect the COM port on your PC to the RS-232 port on the unit, as section 5.1 describes, and go to the Kramer Web site at http://www.kramerelectronics.com. 8 Technical Specifications Table

  • Kramer VP-720DS, KRAMER: SIMPLE CREATIVE TECHNOLOGY Your Seamless Switcher / Scaler 6 # Feature Function 17 PIP LED Illuminates when the picture-in-picture function is selected 18 UP Button Moves up one step (in the same level) in the OSD screen 19 DOWN Button Moves down one step (in the same level) in the OSD screen 20 + Button Increases the range by one step in the OSD screen 21 - Button Decreases the range by one step in the OSD screen 22 ENTER Button Moves to the next level in the OSD screen 23 MENU Button Displays the OSD

  • Operating the Seamless Switcher / Scaler 17 7.1.2 Choosing the Output Resolution You can select the output resolution (choosing the pixel resolution, as section 6.1 describes), by pressing the OUT button 1 on the front panel or the OUT key on the infra-red remote control transmitter (see Figure 49). The OSD status appears superimposed over the top right corner of the screen for a few s

  • Kramer VP-720DS, Your Seamless Switcher / Scaler 3 • Include an OSD (on-screen display) for making the adjustments that can be located anywhere on the screen, and can be doubled in size. The OSD can be used to deactivate the source prompt, choose the color of the blank screen, and choose from three seamless switching image transition speeds • Include seven multi-functional input buttons that cycle between selecting a source, freezing that source, or deactivating that source (and displaying a blank screen) • Include a front panel lock • Incorporate full ProcAmp 1 processing for video and

  • Kramer VP-720DS, KRAMER: SIMPLE CREATIVE TECHNOLOGY Operating the Seamless Switcher / Scaler 16 To unlock the front panel (releasing the protection mechanism): • Press and hold the MENU front panel OSD button 1 or the MENU key on the infra-red remote control transmitter (see Figure 49) for a few seconds, until the Key Lock Off OSD status appears superimposed over the top right corner of the screen for a few seconds 2 7 Operating the Seamless Switcher / Scaler Section 7.1 describes how to switch and scale an input. Section 7.2 describes the methods of controlling the Seamless Switcher / Scaler. 7.1 Switching and Scaling S

  • Kramer VP-720DS, KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 2 s-Video, component video, VGA/SVGA/XGA/UXGA, and DVI signals to the following user-selectable pixel rates: • VGA (640x480) • SVGA (800x600) • XGA (1024x768) • SXGA (1280x1024) • UXGA (1600x1200) • 852x1024 • 1024x1024 • 1366x768 • 1365x1024 1 • 1280x720 1 • 720x483 1 • 852x480 1 • 1400x1050 1 • A user definable output mode 2 The VP-723DS has 3 additional output modes used for high definition televisio

  • Kramer VP-720DS, Operating the Seamless Switcher / Scaler 27 7.3.6.3 Choosing the Audio Utility Settings From the Audio Setting Utility screen (see Figure 32), you can set the volume, treble, bass, and choose between stereo and mono (see Figure 33). Figure 32: Audio Setting Utility Screen Figure 33: Audio Setting Stereo Utility Screen 7.3.6.4 Choosing the PIP Utility Settings From the PIP Setting Utility screen (see Figure 34), you can activate the PIP (see Figure 35), and choose the source (see Figure 36), the size (see Figure 37) and the position of the PIP. Figure 34:

  • Kramer VP-720DS, Your Seamless Switcher / Scaler 7 Table 2: Rear Panel VP-720DS and VP-723DS, Seamless Switcher / Scaler Features # Feature Function 1 VIDEO HD15 Connector Connects to the video acceptor (for example, Plasma display, projector or monitor) that displays the scaled output (with the OSD superimposed over it) In the HDTV mode (VP-723DS), the signal goes out via 3 PINS: PIN 1 is Red or P r , PIN 2 is Green or Y, PIN 3 is Blue or P b 2 OUTPUTS AUDIO L and R RCA Connectors Connects to the left and right stereo audio a

  • Operating the Seamless Switcher / Scaler 25 Figure 27: Utility Screen 7.3.6.1 Choosing the Graphic Utility Settings From the Graphic 1 Setting Utility screen (see Figure 28), you can set the color format (see Figure 29), position, saturation, hue, sharpness, frequency and phase, as well as auto image 2 and auto gain 3 . Figure 28: Graphic Setting Utility Screen Selecting the

  • Kramer VP-720DS, Your Seamless Switcher / Scaler 5 Table 1: Front Panel VP-720DS and VP-723DS, Seamless Switcher / Scaler Features # Feature Function 1 POWER Switch Illuminated switch supplying power to the unit 2 IR Receiver / LED Green when the unit will accept IR remote commands 3 AV1 Illuminates 1 when the composite video / audio source 1 is selected 4 AV2 Illuminates 1 when the composite video / audio source 2 is selected 5 YC1 Illuminates 1 when the s-Video (Y/C) / audio source 1 is selected 6 YC2 Illuminates 1 when the s-Video (Y/C) / audio source 2 is selected 7 Component Illuminates 1 when the com

  • Kramer VP-720DS, Operating the Seamless Switcher / Scaler 31 Figure 43: Output Setting Utility Screen Figure 44: Output Setting Resolution Utility Screen Figure 45: Output Setting Refresh Rate Utility Screen

  • Kramer VP-720DS, Understanding the Seamless Switcher / Scaler 11 6 Understanding the Seamless Switcher / Scaler The VP-720DS and VP-723DS include the following front panel buttons: • A set of 7 INPUT SELECTOR buttons (AV1, AV2, YC1, YC2, Component, VGA, and DVI) • An OUT button (see section 6.1) • A PIP button (see section 6.2) • A set of 6 OSD buttons, which are described in Table 1: MENU, ENTER, -, +, UP, and DOWN 6.1 Understanding the OUT Button Functionality Press the OUT button 1 to choose the desired output resolution. Table 3 and Figure 4 define how to select the output

  • Kramer VP-720DS, Contents i Contents 1 Introduction 1 2 Getting Started 1 3 Overview 1 4 Your Seamless Switcher / Scaler 3 5 Connecting the Seamless Switcher / Scaler 8 5.1 Connecting a PC 9 6 Understanding the Seamless Switcher / Scaler 11 6.1 Understanding the OUT Button Functionality 11 6.2 Understanding the PIP Button Feature 13 6.2.1 Activating the PIP Feature 13 6.2.2 PIP Characteristics 14 6.2.3 Toggling between the PIP and the Screen Source (SWAP) 14 6.2.4 Resizing the PIP 15 6.2.5 Moving the Position of the PIP 15 6.3

  • Kramer VP-720DS, Communication Protocol 39 Table 9: RS-232 Read Command Command Sent Return Source K 15EA VGA1 K 16E9 VGA2 K 17E8 DVI K 18E7 Component K 19E6 C-Video 1 K 39C6 C-Video 2 K 3AC5 S-Video 1 K 3BC4 S-Video 2 K 3CC3 Freeze K 1CE3 Freeze On K B24D Freeze Off K B34C PIP K 1DE2 PIP On K B04F PIP Off K B14E Mute K 22DD Mute On K B44B Mute Off K B54A Blank K 3EC1 Blank On K B649 Blank Off K B748 Key Lock K 47B8 Key Lock On K B847 Key Lock Off K B9

  • Kramer VP-720DS, Communication Protocol 37 9 Communication Protocol The Com port setting details are: Baud Rate: 9600/115200, Parity: none, Data Bits: 8 bits, Stop Bits: 1 bit, Set CTS Mode: Off, and Set XON/XOFF: Off. Table 7: RS-232 Protocol Field 1 Field 2 Field 3 Field 4 Field 5 "L" " " "Code" "~Code" 0x0d "L" ASCII Code, 1 byte " " ASCII space, 1 byte "xx" Code Str, 2 byte "xx" is 1's complement of Code str, 2 byte 0x0d, 1 byte Example: Menu On Command is"L 1

  • Kramer VP-720DS, P/N: 2900-0070144 A1 Addendum: Scalers Group Additional Features of the Scaler Products Group according to the Master-Firmware Ver-2.33 Release. 1. This version requires Slave Firmware version 1.06 or higher. The version can be seen in the INFO section of the on-screen menu. Contact your Kramer service center if you have any questions. 2. Improved functionality lets you select the PIP source via the R

  • Kramer VP-720DS, KRAMER: SIMPLE CREATIVE TECHNOLOGY Understanding the Seamless Switcher / Scaler 14 Figure 5: OSD PIP Status When the Source Prompt is OFF (see Figure 41), activating the PIP toggles between the PIP (with no frame and no OSD PIP status) and no PIP. 6.2.2 PIP Characteristics You can determine the following PIP characteristics: • PIP Source • PIP Size (1/4, 1/9, 1/16, 1/25 or split screen) • Horizontal and Vertical position, placing it anywhere on the screen 6.2.3 Toggling between the PIP and the Screen Source (SWAP) To toggle back and forth between the PIP content and the screen source co

  • Kramer VP-720DS, Addendum: Scalers Group A2 8. Under the Utility>Output Setting>User Mode Setting there is a new option: “Set Current”. This feature lets you apply the parameters of the currently selected output resolution to the User Define output resolution (Utility>Output Setting>Resolution). This set of parameters can be used as a “starting point” to adjust parameters according to the requirements of the signal receiver. The changes to the User Define parameters are applied immediately and require confirmation in the same part of the OSD. 9. In the OSD under UTILITIES>ADVANCED there is new item “User Define Measure”. This feature lets you modify t

  • Kramer VP-720DS, KRAMER: SIMPLE CREATIVE TECHNOLOGY 40 LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for three years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The foll

  • Kramer VP-720DS, Operating the Seamless Switcher / Scaler 23 Figure 21: Zoom Ratio Adjustment Example Figure 22 illustrates how the pop-up OSD Enlarge status box shows a zoom position adjustment from the top left corner (Image C) to the lower right corner (Image D): Figure 22: Zoom Position Adjustment Example 7.3.5.1 Adjusting the Zoom Ratio You can adjust the zoom ratio to up to 400% via one or both of these methods: • Using the Zoom + and/or the Zoom - control keys 1 on the infra-red remote control transmitter (see Figure 49). The pop-up OSD Enlarge status box continuously displays the zoom ratio and position, as Figure 20 illustrates • Using the OSD

  • Kramer VP-720DS, Operating the Seamless Switcher / Scaler 29 7.3.6.5 Choosing the Seamless Switch Utility Settings From the Seamless Switch Utility screen (see Figure 38), you can choose the image transition speed Mode 1 , set the Background screen color 2 when there is no active source (Black or Blue), and activate (finds the active source) or deactivate (displays the source selected prior to power down) the Auto Search: Figure 38: Seamless Switch Utility Screen 7.3.6.6 Choosing the OSD Utility Settings From the OSD Setting Utility screen (see Figure 39), you can set the OSD position, time out, size (see Figure 40), source prompt 3 (see Figure 41), and choose the blank color

  • KRAMER: SIMPLE CREATIVE TECHNOLOGY Communication Protocol 38 56 55 0x37 0xC8 Status L 37C8 57 56 0x38 0xC7 Enter+UP L 38C7 58 57 0x39 0xC6 C-Video 1 L 39C6 59 58 0x3A 0xC5 C-Video 2 L 3AC5 60 59 0x3B 0xC4 S-Video 1 L 3BC4 61 60 0x3C 0xC3 S-Video 2 L 3CC3 62 61 0x3D 0xC2 OUT L 3DC2 63 62 0x3E 0xC1 Blank L 3EC1 68 7

  • Kramer Electronics, Ltd. 3 Am VeOlamo Street. Jerusalem 95463, Israel Tel: (+972-2)-654-4000 Fax: (+972-2)-653-5369, E-mail: [email protected] P/N: 2900 – 007004 REV 4 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com. Updates to this user

  • Kramer VP-720DS, Operating the Seamless Switcher / Scaler 21 Figure 17: Geometry (Scale: Aspect Ratio and Nonlinear) Screen Set the aspect ratio according to your specific requirements—the native resolution—that is, depending on the specifications of the Plasma screen or projector. When using a VGA, DVI and/or component video 1 source, you can choose an aspect ratio from the following: Full Screen, Native, 4:3 Output 2 , and 16:9 Output 3 . When using a composite video source and/or an s-Video source and/or

  • Kramer VP-720DS, Connecting the Seamless Switcher / Scaler 9 3. Connect the VIDEO OUTPUT HD15F connector 1 to the video acceptor, for example, a projector or a Plasma monitor (as shown in Figure 3), and connect the AUDIO OUTPUT pair of RCA connectors to the audio acceptor, for example, a power amplifier. 4. The power cord 2 (the power connector is not illustrated in Figure 3). 5. A PC (optional), as section 5.1 describes. 5.1 Connecting a PC You can connect a PC (or other controller) to the VP-720DS or VP-723DS via the RS-232 port for remote control, and for upgrading the firmware, as section 7.4 describes. To connec

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Lifecycle LC8500 General assembly lifecycle/lc8500-355.pdf 03 Sep 2022 19
2 Makita LXPK01 Instruction manual makita/lxpk01-K88.pdf 25 Sep 2023 40
3 Harman Kardon HK 990 Owner's manual harman-kardon/hk-990-C8O.pdf 15 Aug 2023 18 2.3 Mb
4 Startright Qpad PRO Manual  startright/qpad-pro-KDM.pdf 06 Feb 2024 20
5 ZyXEL Communications GS3700 Series Operation & user’s manual zyxel-communications/gs3700-series-LX5.pdf 14 Nov 2023 431 11.18 Mb
6 Samsung MS9796W Owner's instructions and cooking manual samsung/ms9796w-76N.pdf 22 Jun 2023 36 0.31 Mb

Similar Resources:

  • ME DESIGN

    AVC-64

    (16 pages)
    AVC-64Presentation Matrix SwitcherUSER MANUALDesigned and Manufactured in Australia by M.E. Design (Aust) Pty LtdEmail: [email protected] 19 321 212 9481 …
  • Broadcast Tools

    SS 16.4

    (25 pages)
    INSTALLATION AND OPERATIONMANUALfor theBroadcast Tools® SS 16.4Sixteen Input, Quad Output Stereo Audio Matrix SwitcherBroadcast Tools® is a registered trademark of Broadcast Tools, Inc.Copyright 1989 - 2004 by Broadcast Tools, Inc. All rights reserved.No part of this document may be reproduced or distributed without permission.ALL SPECIFICATIONS AND FE …
  • Altinex

    MULTI-TASKER MT110-101

    (13 pages)
    MULTI-TASKER MANUAL PART NUMBER: 400-0197-004MT110-101/103 8 X 8 MONO AUDIO MATRIX SWITCHER CARD FOR MULTI-TASKER USER’S GUIDE TM …
  • SMART-AVI

    HDR-8X8-Plus

    (2 pages)
    TECHNICAL SPECIFICATIONS PARTNO. QTY DESCRIPTIONHDR-8X8-Plus 1 4K Resolution 8x8 HDMI Router PS12VDC3A 1 Power Supply User Manual 1 Quick Start Guide HDR8X8-PLUS-EAR 2 Mounting Brackets RMHDR8X8 1 IR Remote Control WHAT’S IN THE BOX 4K 8x8 HDMI Switch Matrix HDR-8X8-Plus Quick Start Guide NOTICE The information contained in this document i …
  • SMART-AVI

    MXU-88

    (10 pages)
    1 Made in U.S.A. www.SmartAVI.com 1-800-AVI-2131 MXU-88 User Manual Access and control up to 8 computers with 4K HDMI and Transparent USB 2.0 from up to 8 connected stations 8X8 4K HDMI / USB 2.0 Matrix Switch …
  • Kramer

    VS-88UHDA

    (4 pages)
    VS-88UHDA Enhanced Quick Start (P/N: 2900-300790QS REV 2) P/N: 2 9 0 0 - 3 0 0 7 9 0 Q S Rev: 2 Scan for full manual VS-88UHDA Quick Start Guide This guide helps you install and use your VS-88UHDA for the first time. Go to www.kramerav.com/downloads/VS-88UHDA to download the latest user manual and check if firmware upgrades are available. Step 1: Chec …

Comments, Questions and Opinions: