Manualios.com

Kramer FC-10ETH Operation & User’s Manual

Kramer FC-10ETH Manual Online:

4.9, 517 votes
Kramer FC-10ETH User Manual
Kramer FC-10ETH User Guide
Kramer FC-10ETH Online Manual

Text of Kramer FC-10ETH User Guide:

  • Kramer FC-10ETH, For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900- 000086 Rev: 3 ! SAFETY WARNING Disconnect the unit from the power supply before opening and servicing

  • 16 FC-10ETH - Controlling Machines via the Ethernet using the FC-10ETH 6. Select either:  A virtual COM port if the control application cannot directly connect to the Ethernet driver (see Section 5.1.1), or  An Ethernet port connection if the control application can directly connect to the Ethernet driver (see Section 5.1.2) Figure 9: Con

  • Kramer FC-10ETH, 6 FC-10ETH - Overview # Feature Function 1 12V DC +12V DC connector for powering the unit 2 RS-232 COM 1 Port Connects to the RS-232 9-pin D-sub port on the Kramer (or other) device 1 or PC 3 ETHERNET Port Connects to your LAN 4 RS-232 COM 2 Port Connects to the RS-232 9-pin D-sub port on a Kramer (or other) device 2 or PC A Kramer device can be connected to either the RS-232 COM 2 port, or to the RS-485 terminal block port (but not to both) 5 RS-485 Terminal Block Port Connects to the RS-485 port on a Kramer (or other) device A Kramer device can be connected to either the RS-232 COM 2 port, o

  • 4 FC-10ETH - Overview 3 Overview The high-performance FC-10ETH Ethernet Controller is an easy-to-use, bidirectional hardware and software interface system for controlling Kramer (and also non-Kramer) RS-232 and/or RS-485 controllable machines via Ethernet LAN, as well as via the Internet. In particular, the FC-10ETH features:  Network connecti

  • Kramer FC-10ETH, FC-10ETH – Flash Memory Upgrade 21 6.1.3 Upgrading the Firmware Follow these steps to upgrade the firmware: 1. Double click the KFR-Programmer desktop icon. The KFR-Programmer window appears (see Figure 12). Figure 12: The KFR-Programmer Window 2. Select the required COM Port to which the FC-10ETH is connected on your PC. 3. Press the File button to select the .s19 firmware file included in the package. 4. Press the Send button to download the file. The Send button lights red. 5. Wait until downloading is completed and the red Send button turns off. 6.2 Upgrading Version 2 Devices To upgrade the firmware of

  • Kramer FC-10ETH, 14 FC-10ETH - Configuring the FC-10ETH Ethernet Controller To configure the FC-10ETH to the Passive mode, connect it and do the following: Only for V.1 devices because this is the default mode. V.2 has no configuration. 1. Press the Search button to find the device connected to the PC. 2. Set the IP address number according to your network requirements. 3. For V1 devices, clear the Active Mode check box (if selected) in the configuration manager. (This does not appear for V2 devices). 4. Press the Config button to accept c

  • Kramer FC-10ETH, 8 FC-10ETH - Configuring the FC-10ETH Ethernet Controller The Local Area Connection Properties window for the selected network adapter appears as shown in Figure 3. Figure 3: Local Area Connection Properties Window 4. Highlight either Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) depending on the requirements of your IT system. 5. Click Properties. The Internet Protocol Properties window relevant to your IT system appears as shown in Figure 4 or Figure 5.

  • Kramer FC-10ETH, FC-10ETH – Getting Started 3 2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the

  • 12 FC-10ETH - Configuring the FC-10ETH Ethernet Controller 4.3 Defining the Kramer FC-10ETH Manager Figure 8: FC-10ETH Manager Window # Feature Function 1 Menu Bar DEVICE Search for all connected devices Upload configuration to device (same as button 4) SETTINGS Sets the broadcast address and the broadcast network interface ABOUT Displays software developme

  • Kramer FC-10ETH, FC-10ETH – Configuring the FC-10ETH Ethernet Controller 11 4.2 Installing and Configuring the FC-10ETH To configure the FC-10ETH via the ETHERNET, do the following: 1. Connect the FC-10ETH as described in Section 4.1 (see Figure 7) 2. Click the appropriate shortcut in the Start menu’s Programs folder. The FC-10ETH Configuration Manager window (see Figure 8) opens. 3. Click the Search button to automatically search for devices (or the Search Board command on the Action menu). The MAC Address f

  • Kramer FC-10ETH, FC-10ETH – Configuring the FC-10ETH Ethernet Controller 7 4 Configuring the FC-10ETH Ethernet Controller This section describes:  How to connect the FC-10ETH for configuration, via its ETHERNET port (see Section 4.1)  How to install and run the Configuration Manager software (see Section 4.2)  The Configuration Manager Window features (see Section 4.3) 4.1 Operating via Ethernet You can connect to the product via Ethernet using either of the following methods:  Dir

  • Kramer FC-10ETH, 10 FC-10ETH - Configuring the FC-10ETH Ethernet Controller 6. Select Use the following IP Address for static IP addressing and fill in the details as shown in Figure 6. For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to 192.168.1.255 (excluding 192.168.1.39) that is provided by your IT department. Figure 6: Internet Protocol Properties Window 7. Click OK. 8. Click Close. 4.1.2 Connecting the Ethernet Port via a Network Hub or Switch You can connect the Ethernet port of the FC-10ETH to the Ether

  • Kramer FC-10ETH, 2 FC-10ETH - Getting Started 2 Getting Started We recommend that you:  Unpack the equipment carefully and save the original box and packaging materials for possible future shipment  Review the contents of this user manual Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performance:  Use only good quality connection ca

  • Kramer FC-10ETH, 20 FC-10ETH - Flash Memory Upgrade 6 Flash Memory Upgrade The FC-10ETH firmware is located in FLASH memory, which lets you upgrade to the latest Kramer firmware version in minutes! 6.1 Upgrading Version 1 Devices The process involves:  Downloading the upgrade package from the Internet (see Section 6.1.1)  Connecting the PC to the RS-232 port (COM 1) (see Section 6.1.2)  Upgrading the firmware (see Section 6.1.3) 6.1.1 Downloading from the Internet You can download the up-to-date file from the Internet (file names are liable to change from time to time). To download: 1. Go to our

  • Kramer FC-10ETH, FC-10ETH – Controlling Machines via the Ethernet using the FC-10ETH 17 5.1.2 Setting an Ethernet Connection If the control application can directly connect to the Ethernet driver, select the host IP and port number according to your FC-10ETH configuration, as illustrated in Figure 10. Figure 10: The Port Window – Selecting a Remote Connection 5.2 Controlling a Kramer Machine via a Serial Controller To control a Kramer machine via serial controllers (in the Active routing mode), a

  • Kramer FC-10ETH, FC-10ETH – Configuring the FC-10ETH Ethernet Controller 13 # Feature Function 10 Data Channel Setting LOCAL IP PORT An address (for the local ports COM 1 and COM 2) on the FC-10ETH device that is currently being configured, which provides a direct route from another Ethernet point application 11 UART SPEED Choose the appropriate baud speed (1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200) 12 UART PARITY Choose the required parity (None, Odd, Even, Mark or Spa

More Instructions:

DOWNLOAD

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Thermo Scientific Medifuge User manual manual thermo-scientific/medifuge-788.pdf 17 Jun 2023 72
2 Ryobi P701 Operator's manual ryobi/p701-HN6.pdf 28 Jan 2024 16 1.37 Mb
3 Novell DATA SYNCHRONIZER MOBILITY PACK - UPDATE 2 Installation manual novell/data-synchronizer-mobility-pack-update-2-WCM.pdf 20 Jul 2022 11
4 Bel Canto DAC3 Operation & user’s manual bel-canto/dac3-51I.pdf 25 Jul 2022 13
5 Nova WA-150 User manual manual nova/wa-150-3Y3.pdf 11 Nov 2023 12
6 Vingtor Stentofon BSWT-6T Installation manual vingtor-stentofon/bswt-6t-13W.pdf 21 Dec 2022 2

Similar Resources:

  • US Robotics

    5426

    (56 pages)
    Wireless USB AdapterQuick Installation GuideGuide d'installation rapideInstallationsanleitungGuida per l'installazione rapidaGuía breve de instalaciónBeknopte installatiegidsHõ zlõ Kurulum Kõ lavuzuΟδηγός γρήγορης εγκατάστασης802.11gUSRoboticsWireless USB AdapterR24.0711.00rev 1.1 10/075426_Quick_Installation_Guide. …
  • Nortel

    5100

    (160 pages)
    4655 Great America ParkwaySanta Clara, CA 95054Phone 1-800-4Nortelhttp://www.nortel.comNortel Switched Firewall 5100 Series Release 2.3.3Browser-Based Interface User’s Guidepart number: 216383-D, October 2005 …
  • Mitsubishi

    QJ71C24/-R2

    (358 pages)
    MELSEC System QProgrammable Logic ControllersUser's Manual(Basic)Serial Communication ModulesQJ71C24N/-R2/-R4, QJ71C24/-R2GX Configurator-SCINDUSTRIAL AUTOMATIONMITSUBISHI ELECTRICMITSUBISHI ELECTRICArt. no.: 13003101 09 2004SH (NA)-080006Version H …
  • ADTRAN

    6540 SHDSL

    (2 pages)
    For more information, refer to the Installation and Maintenance Practice (P/N 61230001L1-5) available online at www.adtran.com.*61230001L1-22B* ©2006 ADTRAN, Inc. All Rights Reserved.61230001L1-22B06126540 SHDSL 2-Wire/4-Wire NTU, AC PoweredExpress 6500 Series6540 Front Panel6540 Rear PanelSHDSL G.703 Nx64KV.35/V.36X.21100-240VAC 50/60Hz 100mACONTROL V.28LE …
  • Abocom

    H-Disk

    (1 pages)
    H-Disk (USB 2.0) If convenience, freedom, reliability and speed are what you are after, the H-Disk is the solution! The H-Disk is a portable USB flash memory with the size of a key. It is tiny enough to tuck away in a shirt pocket or attach to a key-ring. When plugged into a USB port of a computer, it would act like any other mass storage disk drive. The H- …
  • ATTO Technology

    R30F

    (2 pages)
    For More Information: www.ATTOTech.com To Purchase ATTO products: www.ATTOStore.com (716) 691-1999 Power Behind the Storage ATTO ExpressSAS RAID Adapter High-Performance Data Protection for Biscardi Creative Media High Definition media production calls for high definition storage solutions. Biscardi Creative Media is an award-winning production comp …

Comments, Questions and Opinions: