Manualios.com

Kramer 840Hxl Operation & User’s Manual

Kramer 840Hxl Manual Online:

4.2, 1748 votes
Kramer 840Hxl User Manual
Kramer 840Hxl User Guide
Kramer 840Hxl Online Manual

Text of Kramer 840Hxl User Guide:

  • Kramer 840Hxl, 24 840Hxl - Serial Protocol 8.3.5 Get Output Status Command Send/Receive Data 0xE7 0xEB, address, 0xE7, 0x01, checksum 0xEB, address, 0xE7, 0x0E, data1,… data14, checksum Data1: FOLLOWENCRY_MONITOR;  0 = decryption  1 = encryption Data2: RESOULTION_INDEX;  from 0x00 to 0x17 (24 resolutions) Data3: PATTERN_INDEX;  from 0x00 to 0x1f (32 patterns) Data4: DEEPCOLOR_MODE;  0 = auto  0x18 = 24bit  0x1e = 30bit  0x24 = 36bit Data5: COLORSP

  • Kramer 840Hxl, 16 840Hxl - Operating the 840Hxl Pattern Generator Figure 8: Connection Error Message 6.2.3 Controller Software Main Window The Controller Software Main Window is shown in Figure 9. Figure 9: Controller Software Main Window

  • Kramer 840Hxl, 840Hxl - Getting Started 3 3 2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your

  • Kramer 840Hxl, 840Hxl – Contents i Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 2 2.3 Recycling Kramer Products 3 3 Overview 4 4 Defining the 840Hxl Pattern Generator 5 5 Connecting the 840Hxl 7 5.1 Connecting to a PC 8 6 Operating the 840Hxl Pattern Generator 9 6.1 Operating the 840Hxl Using the Front Panel Buttons 11 6.2 Operating the 840Hxl Using the Control Application 12 7 Technical Specifications 21 8

  • 840Hxl - Operating the 840Hxl Pattern Generator 9 9 6 Operating the 840Hxl Pattern Generator The 840Hxl can be operated either using the front panel buttons (see Section 6.1) or using the 840Hxl Control Application (see Section 6.2). The 840Hxl Control Application is available as a free download from http://www.kramerelectronics.com). You can c

  • Kramer 840Hxl, 18 840Hxl - Operating the 840Hxl Pattern Generator Figure 11: About 6.2.5 Editing User Defined Resolutions To edit a user defined resolution: 1. Click on one of the user defined resolution edit buttons. The User Defined Resolution Window appears as shown in Figure 12. Figure 12: User Defined Resolution Window

  • Kramer 840Hxl, 840Hxl - Serial Protocol 25 25 8.3.8 Get Monitor Status Command Send/Receive Data 0xE9 0xEB, address, 0xE9, 0x01, 0x00, checksum 0xEB, address, 0xE9, 0x08, data1, ……, data8, checksum data1: monitor Color Space status (0 = RGB, 1 = YUV422, 2 = YUV444, 3 = YUV444+422) data2: reserved data3: reserved data4: reserved data5: reserved data6: reserved data7: reserved data8: reserved 8.3.9 Set Detailed Timing for User-defined Resolution Command Send/Receive Data 0xEA 0xEB, address, 0xEA, 0x26, [block index], [perfo

  • Kramer 840Hxl, 12 840Hxl - Operating the 840Hxl Pattern Generator 6.2 Operating the 840Hxl Using the Control Application The 840Hxl Control Application is a PC-based program which lets you program and control the device. To use the 840Hxl Control Application you must download and install the USB driver and the 840Hxl Control Application. Note: The USB driver is not supported by Windows 64 bit systems. 6.2.1 Downloading and Installing the USB Driver and Control Application To install the USB driver and Control Application: 1. Navigate to the Kra

  • Kramer 840Hxl, 22 840Hxl - Serial Protocol 8 Serial Protocol The 840Hxl can be controlled via the serial port using the commands described in this section. The following table shows the default communication parameters. RS-232 Baud Rate: 9600 Data Bits: 8 Stop Bits: 1 Parity: None 8.1 Command Format Commands must be in the following format: 0xEB, address, command, length of data, data 1, …data n, checksum where the following table describes the command components. Command Component Description 0xEB Fixed command start byte address Device address. This is always 0x90 for the 840Hxl command Command to be se

  • Kramer 840Hxl, 8 840Hxl - Connecting the 840Hxl 5.1 Connecting to a PC You can connect a PC either using the RS-232 port or the USB port. 5.1.1 Connecting a PC via the RS-232 Serial Port You can connect to the 840Hxl via an RS-232 connection using, for example, a PC. Note that a null-modem adapter/connection is not required. To connect to the product via RS-232:  Connect the RS-232 9-pin D-sub rear panel port on the product unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pi

  • Kramer 840Hxl, 840Hxl - Introduction 1 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specia

  • Kramer 840Hxl, 14 840Hxl - Operating the 840Hxl Pattern Generator 12. Click Next. 13. Select Search for the best driver in these locations. 14. Check Include this location in the search. Browse to your previously designated folder. 15. Click Next. 16. Select the file atm6124.inf 17. The warning This driver is not digitally signed! appears. 18. Click Next. 19. Ignore the warning. Click Continue Anyway. 20. In the Insert disk window, click OK as shown in Figure 6. Figure 6: Insert Disk Window 21. Select the file atm6124.sys and click Open. The driver installs and a success message is displayed. The USB driver has been successfully installed and you ca

  • Kramer 840Hxl, 840Hxl - Defining the 840Hxl Pattern Generator 5 5 4 Defining the 840Hxl Pattern Generator Figure 1 defines the front panel of the 840Hxl. Figure 1: 840Hxl Pattern Generator Front Panel # Feature Function 1 FUNCTION Buttons ON/OFF Press to toggle on and off. Button LED lights when on. When on, the top row of functions are enabled (RES, PAT, CS and H/D). When off, the bottom row of functions (HDCP, DC, ASF and ASD) are enabled (see Section 6.1) 2 RES/HDCP Press to select either the Resolution or HDCP functions 3 PAT/DC Press to select either the Pattern or Color Depth functions 4 CS/ASF Press to select either

  • 6 840Hxl - Defining the 840Hxl Pattern Generator Figure 2 defines the rear panel of the 840Hxl. Figure 2: 840Hxl Pattern Generator Rear Panel # Feature Function 10 HDMI OUT Connector Connect to the HDMI acceptor 11 RS-232 9-pin D-sub Connector Connect to the serial port on a PC for remote control (see Section 5.1.1) 12 USB Connector Connect to the USB po

  • 20 840Hxl - Operating the 840Hxl Pattern Generator Figure 14: User Defined Resolution Advanced Window–Detailed Timing Descriptor Tab 7. Edit the detailed timing descriptor values as required. 8. Click OK to save the values. 6.2.6 To Read EDID Information To read EDID information:  Click Get EDID Info on the menu bar. The EDID

  • Kramer 840Hxl, 840Hxl - Technical Specifications 21 21 7 Technical Specifications OUTPUT: 1 HDMI connector OUTPUT RESOLUTIONS: VGA 640 x 480 @60Hz 1440 x 576i @50Hz 720 x 480 @60Hz 1280 x 720 @50Hz SVGA 800 x 600 @60Hz 1280 x 720 @60Hz XGA 1024 x 768 @60Hz 1280 x 720 @100Hz 1260 x 720 @60Hz 1280 x 720 @120Hz 1360 x 768 @60Hz 1440 x 288 @50Hz 1440 x 900 @60Hz 1440 x 480 @60Hz SXGA+ 1400 x 1050 @60Hz 2880 x 240 @60Hz SXGA 1260 x 1024 @60Hz 2880 x 288 @50Hz WSXGA+ 1680 x 1050 @60Hz 2880 x 480 @60Hz SXGA 1280 x 1024 @75Hz 2880

  • 10 840Hxl - Operating the 840Hxl Pattern Generator User Defined Resolutions Resolution Resolution 720 x 480 @120Hz 2880 x 480 @60Hz 720 x 480 @240Hz 2880 x 480i @60Hz 720 x 576 @50Hz 2880 x 576 @50Hz 720 x 576 @100Hz 2880 x 576i @50Hz 720 x 576 @200Hz 1920 x 1080 @25Hz 1440 x 576 @50Hz 1920 x 1080 @30Hz 1440 x 576i @50Hz 1920 x 1080 @50Hz 1280 x 720

  • Kramer 840Hxl, For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900- 300032 Rev: 5 ! SAFETY WARNING Disconnect the unit from the power supply before opening and servicing

  • Kramer 840Hxl, 840Hxl - Operating the 840Hxl Pattern Generator 17 17 # Feature Function 1 CONNECT Button Press to connect to a device (see Section 6.2.2) 2 COMMON Resolutions Buttons Press to select a pre-configured output resolution 3 USER DEFINED Resolutions Buttons Press to select a user-defined output resolution 4 User Defined Resolution Edit Buttons Press to edit the relevant user defined output resolution 5 Patterns Buttons Press to select an output pattern 6 Output Settings Buttons Press to modify the output settings: Signal Mode—HDMI, DVI, Auto HDCP—HDCP, No HDCP Color Space—RGB, YUV 444, YUV

  • Kramer 840Hxl, 4 840Hxl - Overview 3 Overview The 840Hxl is a high performance HDMI video test pattern generator. It can generate 32 preset patterns (including several unique patterns incorporating motion) at 42 popular, predefined computer and HD video resolutions. In particular, the MultiTOOLS ® 840Hxl features:  An HDMI output  Five dual-function and two single-function control buttons  A two-digit 7 segment display  An onboard EPROM that saves the last settings

  • Kramer 840Hxl, 840Hxl - Connecting the 840Hxl 7 7 5 Connecting the 840Hxl Always switch off the power to any device before connecting it to your 840Hxl. After connecting your 840Hxl, connect its power and then switch on the power to the device. To connect the 840Hxl as illustrated in the example in Figure 3: 1. Connect the HDMI OUT connector to an HDMI acceptor (for example, a flat panel LCD display). 2. Optional—connect a PC to control the 840Hxl via the RS-232 or USB ports. 3. Connect the power adapter to

  • Kramer 840Hxl, 840Hxl - Operating the 840Hxl Pattern Generator 11 11 The output options in the following table are supported. Parameter Front Panel Values Signal Mode H/D HDMI (video, audio and data packet), DVI (video only), Auto HDCP HDCP On, Off Color Space CS RGB, YUV 444, YUV 422, Auto Color Depth DC 24 bit, 30 bit, 36 bit, Auto Audio Sample Rate ASF 44kHz, 48kHz, 88kHz, 96kHz, 176kHz, 192kHz, Auto Audio Sample Depth ASD 16 bit, 20 bit, 24 bit, Auto 6.1 Operat

  • Kramer 840Hxl, 2 840Hxl - Getting Started 2 Getting Started We recommend that you:  Unpack the equipment carefully and save the original box and packaging materials for possible future shipment  Review the contents of this user manual Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performance:  Use only good quality connection cables (we recommend Kr

More Instructions:

DOWNLOAD

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Campbell CR9000 Instruction manual campbell/cr9000-1E6.pdf 25 Jun 2023 218 1.81 Mb
2 Eleaf iJust 2 Operation & user’s manual eleaf/ijust-2-TAG.pdf 08 Jul 2022 2
3 AVE WP S 210 F1 Operation & user’s manual ave/wp-s-210-f1-19D.pdf 08 May 2023 3
4 Ericsson MDS Maintenance manual ericsson/mds-XL5.pdf 26 May 2023 10 0.19 Mb
5 TDK TRI-150R Datasheet tdk/tri-150r-12W.pdf 21 Nov 2022 2 0.06 Mb
6 Atlona AT-VGA-RS300SRS Operation & user’s manual atlona/at-vga-rs300srs-XU6.pdf 16 Jan 2024 12

Similar Resources:

  • Powermate

    PM2000i

    (20 pages)
    PM2000i and PM2200i Portable GeneratorOwner’s ManualSAVE THIS MANUAL FOR FUTURE REFERENCE002318MODEL:________________________SERIAL:________________________DATE PURCHASED:______________(000209a)WARNINGThis product is not intended to be used in a critical life support application. Failure to adhere to this warning could result in death or serious injury. …
  • MULTIQUIP

    DCA-85USJ

    (90 pages)
    PARTS AND OPERATION MANUALOPERATION AND PARTS MANUALPARTS LIST NO. M2870400004Revision #0 (09/17/04)THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALL TIMES.ULTRA-SILENTTM SERIESMODEL DCA-85USJGENERATOR …
  • Predator

    68525

    (4 pages)
    Generator Components10iQUICK START GUIDESTOPCheck total Start-up watts amount before plugging in any Items: 68525 & 68530A. Fuel CapB. Fuel ValveC. ChokeD. Air FilterE. Starter HandleF. Power Switch G. Low Oil IndicatorH. DC ReceptacleI. DC Circuit BreakerJ. AC Circuit BreakersK. AC ReceptaclesL. Ground TerminalM. Battery (not included)O …
  • Viking

    MTG-10

    (4 pages)
    MTG-10MTG-10Multi-ToneGeneratorFebruary 27, 2003PPhhoonnee......771155..338866..88886611iinnffoo@@vviikkiinnggeelleeccttrroonniiccss..ccoommhhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoommPower: 120V AC/12V DC 500mA UL listed adapter providedDimensions: 74mm x 53mm x 25mm (2.9” x 2.1” x 1.0”)Shipping Weight: 0.4 kg (0.86 lbs)Environm …
  • Fluke

    PM 5136

    (7 pages)
    1®Function GeneratorsPM 5136: 5 MHz• High performance at a budget pricePM 5138A: 10 MHz• Output voltage of 40 VppPM 5139: 20 MHz• 24 Arbitrary waveform-memoriesTechnical DataFluke PM5136, PM5138A, PM5139 Synthesized Function Generatorswith arbitrary waveform …
  • Sealey

    HG50.25

    (2 pages)
    Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.1. SAFETY INSTRUCTIONSIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS ANDCAUTIONS. USE THIS PRODUCT CORR …

Comments, Questions and Opinions: