Manualios.com

Kramer SP-10D Operation & User’s Manual

Kramer SP-10D Manual Online:

3.5, 1506 votes
Kramer SP-10D User Manual
Kramer SP-10D User Guide
Kramer SP-10D Online Manual

Text of Kramer SP-10D User Guide:

  • Kramer SP-10D, Contents i Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 4 Your SP-10D Digital Video Processor 4 5 Installing the SP-10D in a Rack 8 6 Connecting Your SP-10D Digital Video Processor 9 6.1 Connecting a PC 10 6.2 DIP-Switch Settings 11 7 Operating the SP-10D Digital Video Processor 12 7.1 Storing and Recalling Setups 14 7.2 Locking the Front Panel 14 8 Technical Specifications 15 9 Communication Protocol 16 Figures Figure 1: SP-10D Digital Video Processor 5 Figure 2: Connecting the

  • Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making th

  • Kramer SP-10D, Overview 3 3 Overview The unique SP-10D is a multi-standard/multi-format broadcast quality video processor – ProcAmp, TBC, format converter (for mixing different types of equipment), and standards converter. It is a universal single-box solution for all your video processing requirements. In particular, the SP-10D Digital Video Processor includes the following: • Inputs: composite video, s-Video, component video (YUV or RGB/S), and genlock • Outputs 1 : composite video, s-Video, component video (YUV, RGsB, RGBS, RGBHV), “before/after” split-screen, and genlock loop • Video Standards 2 : PAL-B/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM • Pro

  • Kramer SP-10D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Your SP-10D Digital Video Processor 4 To achieve the best performance: • Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) • Avoid interference from neighboring electrical appliances that may adversely influence signal quality and position your Kramer SP-10D away from moisture, excessive sunlight and dust 4 Your SP-10D D

  • Kramer SP-10D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Your SP-10D Digital Video Processor 6 Table 1: Front Panel SP-10D Digital Video Processor # Feature Function 1 POWER Switch Illuminated switch for turning the unit ON or OFF 2 INPUT STANDARD LEDs Cycle between PAL B, PAL N, PAL M, NTSC 3, NTSC 4, and SECAM. The corresponding LED lights 3 INPUT Selector Button Press to select the source, illuminating the appropriate LED 4 INPUT LEDs Cycle between the video sources: CV, YC, YUV, and RGB/S. The corresponding LED lights 5 AUTO Button Toggles between automatically recognizing the input standard (lighting the appropriate

  • Kramer SP-10D, Your SP-10D Digital Video Processor 7 # Feature Function 24 HUE Button Press the HUE 1 button and adjust using the + and – buttons 25 V/RED Button Press the V 4 /RED 5 button 6 and adjust using the + and – buttons 26 YUV/RGB LEDs Cycle between the different color spaces of color control: YUV and RGB. The corresponding LED lights 27 COLOR SPACE Button Press to select the color space of the color control; if the COLOR SPACE button is not illuminated, color control is disabled 28 STORE Button Stores the current setup in the non-volatile memory 29 RECALL Button Recalls a setup from the non-volatile memory 30

  • Kramer SP-10D, Connecting Your SP-10D Digital Video Processor 9 6 Connecting Your SP-10D Digital Video Processor You can use your SP-10D to convert composite video, s-Video, or component video (YUV or RGB/S) signals to composite video, s-Video, and 1 component video (YUV, RGsB, RGBS, RGBHV). The processing can be evaluated on a “Before/after” split-screen. To connect the SP-10D Digital Video Processor, do the following 2 : 1. Connect the following sources to the SP-10D: • The composite video source (for example, a video player) to the CV INPUT BNC connector • The s-Video source (for example, an s-Video player) to the Y/C INPUT 4-pin conne

  • Kramer SP-10D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Connecting Your SP-10D Digital Video Processor 10 Figure 2: Connecting the SP-10D Digital Video Processor 6.1 Connecting a PC You can connect to the unit via a crossed RS-232 connection, using for example, a PC. A crossed cable or null-modem is required as shown in method A and B respectively. If a shielded cable is used, connect the shield to pin 5. Method A (Figure 3 )—Connect the RS-232 9-pin D-sub port on the unit via a crossed cable (pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin

  • Kramer SP-10D, Connecting Your SP-10D Digital Video Processor 11 Hardware flow control is not required for this unit. In the rare case where a controller requires hardware flow control, short pin 1 to 7 and 8, and pin 4 to 6 on the controller side. Method B (Figure 4 )—Connect the RS-232 9-pin D-sub port on the unit via a straight (flat) cable to the null-modem adapter, and connect the null- modem adapter to the RS-232 9-pin D-sub port on the PC. The straight cable usually contains all nine wires for a full connection of the D-sub connector. Because the null-modem adapter (which already i

  • Kramer SP-10D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Operating the SP-10D Digital Video Processor 12 Table 4: Test Signals The SP-10D DIP 4 DIP 5 DIP 6 VITS 330 (Modulated Staircase) – full field mode ON ON ON No Signal 1 OFF OFF OFF Split 75% Bar Generator ON ON OFF VITS 18 (Multiburst 5.8MHz) – full field mode ON OFF ON Vertical 75% Bar Generator ON OFF OFF Inverse Horizontal 75% Bar Generator OFF OFF ON Horizontal 75% Bar Generator OFF ON OFF VITS 17 (2T, 20T, 5 Step Staircase) – full field mode OFF ON ON 7 Operating the SP-10

  • Kramer SP-10D, Operating the SP-10D Digital Video Processor 13 6. Press the STORE button once. For 5 seconds no output video signal is available, and “rL” is displayed in the 7-segment display, indicating that the SP-10D is reloading. After the reloading, the standard of the output video signal changes as well as that of the “Before/after” split-screen. 7. Press the GENLOCK button to enable the genlock function. If the SYNC BNC connector 1 is connected to a genlock source, and the standard of the signal on this i

  • KRAMER: SIMPLE CREATIVE TECHNOLOGY Operating the SP-10D Digital Video Processor 14 • Store the result of the adjustment in another setup #, press the STORE button once, select a setup # between 1 and 16 by pressing the + and – buttons, and then press the STORE button once again If the adjustment is set such that the level setting is at its normal level (

  • Kramer SP-10D, Technical Specifications 15 To unlock the SP-10D: • Press the PANEL LOCK button (for about 2 seconds) until the front panel controls unlock and the PANEL LOCK button no longer illuminates 8 Technical Specifications Table 5 includes the technical specifications: Table 5: Technical Specifications 1 of the SP-10D Digital Video Processor INPUTS: 1 composite video: 1Vpp/75Ω on a BNC connector; 1 YC: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (or RGB/S) 1Vpp/0.7Vpp/0.7Vpp/75Ω on BNC connectors; 1 SYNC (genlock): looped 75Ω/Hi-Z on BNC connectors OUTPUTS: 1 composite v

  • Kramer SP-10D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Communication Protocol 16 9 Communication Protocol This protocol, which enables RS-232 communication between the SP-10D and the PC, uses 4 bytes of information, and data is at 9600 baud. Table 6: Protocol Definitions First byte options DEC HEX 1 128 80 RESET VIDEO 2 160 A0 READ PARAMETER 3 161 A1 WRITE PARAMETER 4 162 A2 RECALL 5 163 A3 STORE 6 189 BD IDENTIFY MACHINE 7 33 21 Set (for the rest of commands) Second byte is the command type Third byte is the parameter value Note: 1

  • Communication Protocol 17 Byte 2 Command Description Byte 3 (parameter value) GLOBAL 20 OUTPUT FORMAT 0 - YUV 1 - RGB 2 - RGBS 21 OUTPUT_STANDARD 0 - PAL B 1 - PAL N 2 - PAL M 3 - NT 3 4 - NT 4 5 - SEC 22 GENLOCK 0 - OFF 1 - ON 23 PANEL_LOCK 0 - OFF 1 – ON 24 SCH -100 - +100 24 DELAY -100 - +100 26 FR

  • Kramer SP-10D, KRAMER: SIMPLE CREATIVE TECHNOLOGY Communication Protocol 18 STORE PC -> I = 35;D = 0;E = PROGRAMM NUMBER -> MACHINE PC <- I = 34;D = 0;E = PROGRAMM NUMBER <- MACHINE (RECALL) IDENTIFY MACHINE MACHINE NAME PC -> I = 61;D = 1;E = 0 -> MACHINE PC <- I = 61;D = MACHINE NAME HIGH;E = MACHINE NAME LOW <- MACHINE SOFTWARE VERSION PC -> I = 61;D = 3;E = 0 -> MACHINE PC <- I = 61;D = SOFTWARE VERSION HIGH;E = SOFTWARE VERSION LOW <- MACHINE Examples: 1. Select CV input format: H21 H80 H80 H98 Unit response: H61 H80 H80 H98 2. Reset: H80 H80 H80 H98 3. Recall set up 1:

  • Kramer SP-10D, 19 LIMITED WARRANTY WHO IS PROTECTED? WHAT IS COVERED AND WHAT IS NOT COVERED WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR HOW YOU CAN GET WARRANTY SERVICE LIMITATION OF IMPLIED WARRANTIES EXCLUSION OF DAMAGES CAUTION! Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the following terms. Kramer HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. Only the first purchase customer may enforce this warranty. We will pay labor and material expenses for covered items. We will not pay for the following: The liability of Kramer for any effective products is

  • Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000082 REV 3 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We wel come your questions, comments and feedback. Caution Safet

More Instructions:

DOWNLOAD

Related Products and Documents (Processor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Oregon Scientific RM912TH Operation & user’s manual oregon-scientific/rm912th-4KG.pdf 06 Mar 2023 2
2 Huacam HCV207 Operation & user’s manual huacam/hcv207-Y9T.pdf 24 Sep 2023 38
3 Bowers & Wilkins CT8XO MK2 Installation and setup manual bowers-wilkins/ct8xo-mk2-4RP.pdf 11 Aug 2022 28 8.85 Mb
4 Sony MHC-EC619iP Operating instructions manual sony/mhc-ec619ip-J2G.pdf 16 Feb 2023 32 0.47 Mb
5 Japan Radio JLR-7700MKII Instruction manual japan-radio/jlr-7700mkii-39Q.pdf 14 Aug 2022 98
6 Munchkin Home Care Product Product user manual munchkin/home-care-product-3HI.pdf 15 Jun 2023 1

Similar Resources:

  • Lectronics

    DM1624F

    (16 pages)
    DM SeriesDigital Audio ProcessorsModels:DM1624FDM1612FDM812HARDWARE and SOFTWARE INSTALLATION GUIDERio Rancho, NM, USAwww.lectrosonics.comFill in for your records: Serial Number: Purchase Date: …
  • HP

    xw3100

    (16 pages)
    1HP Worldwide Limited Warrantyand Technical SupportHP Hardware Limited WarrantyLimited Warranty PeriodThe limited warranty period for your HP product is listed on the serial number labels affixed to the product. The first number is the warranty period for parts in days (d) or years (y), the second number is the warranty period for labor in days (d) or years …
  • HP

    Proliant DL580

    (48 pages)
    Front View:Rear View:1.Quick Removal Access Panel1.Power supplies (2 ship standard in 2P Models; 4 shipstandard in 4P Models)2.Six Hot Plug Redundant Fans Standard on all models3.Front accessible Processor and memory drawer2.Keyboard port4.Support for up to four Quad-Core Intel® Xeon®Processors3.Two USB ports5.Support for up to 16 Small Form-Factor (SFF) S …
  • Sony

    PCM-1630

    (150 pages)
    SONY. DIGITAL AUDIO PROCESSOR PCM-1630 •••••• ~.. 1111 .clllllllllltr.. •••••• ... • • • ., .. -••••• ··---... --···-Jllll. •• II II 1111 Ill 1111 Mllllll Bll II II 1111 II 111111 1111 111''111 1111 11 11 111 11 •••• 1111 ~•r 111~ 1111 II II 118 II II 1111 ••••II• 1!111 ··---· …
  • Asus

    D520MT (BM2CD)

    (2 pages)
    123Desktop PC Installation GuideA9363 / Revised Edition V2 / June 2014BM1AD1BABM1AD1BM1AD1BM1AD1• Connectdevices.• Menyambungkanperangkat.• เชื่อมต่ออุปกรณNOTE/CATATAN/หมายเหต/ / :• Illustrationsareforreferenceonly.Actualproductspecicat …
  • VIPA

    SPEED7 CPU 313SCDPM

    (152 pages)
    Manual VIPA System 300S SPEED7 - CPU SC 313-6CF03 Order No.: VIPA HB140E_CPU_SC Reference: RE_313-6CF03 Rev. 07/45 This manual is part of the documentation package with order number VIPA HB140E_CPU_SC and relevant for: Product Order number as of state: CPU HW CPU FW DPM FW CPU 313SC/DPM VIPA 313-6CF03 01 V328 V312 …

Comments, Questions and Opinions: