Manualios.com

Kramer VP-200XLT Operation & User’s Manual

Kramer VP-200XLT Manual Online:

3.45, 1434 votes
Kramer VP-200XLT User Manual
Kramer VP-200XLT User Guide
Kramer VP-200XLT Online Manual

Text of Kramer VP-200XLT User Guide:

  • Connecting the VP-5T/VP-5THD and the VP-5R 21 11 Connecting the VP-5T/VP-5THD and the VP-5R You can use the VP-5T/VP-5THD 1:4 VGA/UXGA Distributor / CAT 5 Transmitter and the VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor to configure an XGA Line-to-Twisted Pair Transmitter and Receiver system. To connect the VP-5T/VP-5THD with the VP-5R, as the exam

  • KRAMER: SIMPLE CREATIVE TECHNOLOGY Technical Specifications 26 Table 15: Technical Specifications of the VP-5R (with 30m CAT 5 cable) INPUTS: 1 RJ-45 connector OUTPUTS: 5 XGA on 15-pin HD connectors MAX. OUTPUT LEVEL 1 : 1.4Vpp BANDWIDTH (-3dB): 150MHz DIFF. GAIN 1 : 3.4% DIFF. PHASE 1 : 0.05Deg K-FACTOR 1 : <0.05% S/N RATIO 1 : 74dB CONTROLS 1 : LEVEL: –8.2dB t

  • Kramer VP-200XLT, Connecting the VP-5T/VP-5THD and the VP-5R 23 11.1 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Table 10 and Figure 13 define the UTP CAT 5 PINOUT, using a straight pin to pin cable with RJ-45 connectors: Table 10: CAT 5 PINOUT EIA /TIA 568A EIA /TIA 568B PIN Wire Color PIN Wire Color 1 Green / White 1 Orange / White 2 Green 2 Orange 3 Orange / White 3 Green / White 4 Blue 4 Blue 5 Blue / White 5 Blue / White 6 Orange 6 Green 7 Brown / White 7 Brown / White 8 Brow

  • Kramer VP-200XLT, VP-200XLTHD XGA Line Amp / CAT 5 Transmitter 7 Table 1: VP-200XLT XGA Line Amp / CAT 5 Transmitter Features # Feature Function 1 12V DC +12V DC connector for powering the unit 2 LINE OUT RJ-45 Connector Connects to 1 the LINE IN RJ-45 connector on the TP-120 XGA Line Receiver 2 or the VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor 3 XGA OUT 15-pin HD Connector Connect to the XGA acceptor 4 INPUT 15-pin HD Connector Connect to the XGA source 5 LEVEL Control knob Rotate to adjust the output signal level 6 EQ. Control knob Rotate to adjust the video EQ. (equalization) compensation 7 ON LED Illuminates when receiving power 5 VP-200X

  • Connecting the VP-200XLT 17 3. Connect the LINE OUT RJ-45 connector on the VP-200XLT to the LINE IN RJ-45 connector on the TP-120, via UTP cabling (with a range of more than 300ft (more than 100m)), see section 11.1. 4. Connect the 12V DC power adapter to the power socket on the VP-200XLT, and plug the adapter into the mains electricity socket

  • Kramer VP-200XLT, Your VP-5T/VP-5THD 1:4 VGA/UXGA Distributor / CAT 5 Transmitter 11 Figure 5: VP-300T 1:2 XGA DA/ CAT 5 Transmitter (Underside) Table 5: VP-300T 1:2 XGA DA/ CAT 5 Transmitter (Underside) Features # Feature Function 1 ID Bit Switch Slide to the right to set to ON 1 ; to the left to set to OFF 7 Your VP-5T/VP-5THD 1:4 VGA/UXGA Distributor / CAT 5 Transmitter This section describes the front and rear panels of the VP-5T/VP-5THD 1:4 VGA/UXGA Distributor / CAT 5 Transmitter (see sectio

  • Kramer VP-200XLT, Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function. Thank you for purchasing the Kramer: VP-200XLT XGA Line Amp/CAT 5 Transmitter, VP-200XLTHD XGA Line Amp / CAT 5 Transmitter, VP-300T 1:2 XGA DA/ CAT 5 Transmitter,

  • Kramer VP-200XLT, KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 4 3 Overview This user manual describes the following products:  Kramer TOOLS VP-200XLT XGA Line Amp / CAT 5 Transmitter, which accepts one computer graphics input and distributes the signal to its high-density 15 pin “D” connector output, as well as transmitting it over UTP cabling (CAT 5 or similar) to its appropriate receiver, see section 4  Kramer TOOLS VP-200XLTHD XGA Line Amp / CAT 5 Transmitter, which accepts one c

  • Kramer VP-200XLT, Contents i Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 4 3.1 About the Power Connect Feature 4 3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 5 3.3 Recommendations for Achieving the Best Performance 5 4 Your VP-200XLT XGA Line Amp / CAT 5 Transmitter 6 5 VP-200XLTHD XGA Line Amp / CAT 5 Transmitter 7 6 Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter 9 6.1 Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter (Topside) 9 6.2 Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter (Underside) 10 7 Your VP-5T/VP-5THD 1:4 VGA/UXGA Distributor / CAT 5 Transmitter 11

  • Kramer VP-200XLT, Technical Specifications 25 Table 13: Technical Specifications of the VP-300T (with 30m CAT 5 cable) INPUTS: 1 XGA on an 15-pin HD connector OUTPUTS: 2 XGA on 15-pin HD connectors 1 RJ-45 connector MAX. OUTPUT LEVEL 1 : 1.9Vpp (XGA), 1.3Vpp (CAT 5) BANDWIDTH (-3dB): 439MHz (XGA), 152MHz (CAT 5) DIFF. GAIN 1 : 0.05% (XGA), 3.1% (CAT 5) DIFF. PHASE 1 : 0.05Deg (XGA), 0.4Deg (CAT 5) K-FACTOR 1 : <0.05% (XGA and CAT 5) S/N RATIO 1 : 76dB (XGA), 71dB (CAT 5) CONTROLS 1 : LEVEL: –

  • Kramer VP-200XLT, KRAMER: SIMPLE CREATIVE TECHNOLOGY VP-200XLTHD XGA Line Amp / CAT 5 Transmitter 8 Figure 2: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter Table 2: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter Features # Feature Function 1 12V DC +12V DC connector for powering the unit 2 LINE OUT RJ-45 Connector Connects to 1 the LINE IN RJ-45 connector on the TP-120 XGA Line Receiver 2 or the VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor 3 XGA OUT 15-pin HD Connector Connect to the XGA acceptor 4 INPUT 15-pin HD Connector Connect to the XGA source 5 LEVEL trimmer Adjust 3

  • Kramer VP-200XLT, KRAMER: SIMPLE CREATIVE TECHNOLOGY Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter 10 Figure 4 and Table 4 define the VP-300T: Figure 4: VP-300T 1:2 XGA DA/ CAT 5 Transmitter (Topside) Table 4: VP-300T 1:2 XGA DA/ CAT 5 Transmitter (Topside) Features # Feature Function 1 12V DC +12V DC connector for powering the unit 2 LINE OUT RJ-45 Connector Connects to 1 the LINE IN RJ-45 connector on the TP-120 XGA Line Receiver 2 or the VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor 3 OUTPUT 2 15-pin HD Connector Connect to the XGA acceptor 2 4 OUTPUT 1 15-pin HD Con

  • Kramer VP-200XLT, KRAMER: SIMPLE CREATIVE TECHNOLOGY Your VP-200XLT XGA Line Amp / CAT 5 Transmitter 6 4 Your VP-200XLT XGA Line Amp / CAT 5 Transmitter The VP-200XLT is a high-performance XGA line amp / CAT 5 transmitter that accepts one computer graphics (XGA 1 ) input, provides necessary buffering and isolation, and distributes the signal to its high-density 15 pin “D” connector output, as well as transmitting it over UTP CAT 5 cable to its appropriate receiver. In particular, the VP-200XLT has:  A transmission range of more than 300ft (more than 100m) over UTP cabling  Video bandwidth exceeding 400MHz, ensuring transparency even when operating at the highest resolutions �

  • Kramer VP-200XLT, Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000067 REV 5 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Caution Safety Warning: Disconnect the unit from the power supply before opening/servicing.

  • Kramer VP-200XLT, Connecting the VP-300T 19 10 Connecting the VP-300T You can use the VP-300T and, for example, the TP-120 to configure an XGA Line-to-Twisted Pair Transmitter and Receiver system. To connect the VP-300T with the TP-120, as the example in Figure 11 illustrates, do the following: 1. On the VP-300T 1:2 XGA DA/ CAT 5 Transmitter, connect the:  Computer graphics (XGA) source (for example, a computer) to the INPUT 15-pin HD connector  OUTPUT 1 and OUTPUT 2 15-pin HD connectors to up to 1 two acceptors (for example, to a display and to a projector, respectively) 2. On the TP-120 XGA Line Receiver, connect the XGA OUT 15-pin

  • Kramer VP-200XLT, Overview 5 For a CAT 5 cable exceeding a distance of 50m, separate power supplies should be connected to the transmitter and to the receiver simultaneously. 3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) We recommend that you use shielded twisted pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our STP skew-free cable, Kramer BC-SXTP, is intended for transmitting VGA signals. Our non-skew-free cable, Kramer BC-STP, is intended for digital signals. The compliance to electromagnetic interference was tested using STP cables, therefore we rec

  • Kramer VP-200XLT, Kramer Electronics, Ltd. USER MANUAL Models: VP-200XLT, XGA Line Amp / CAT 5 Transmitter VP-200XLTHD, XGA Line Amp / CAT 5 Transmitter VP-300T, 1:2 XGA DA/CAT 5 Transmitter VP-5T, 1:4 VGA/UXGA Distributor/CAT 5 Transmitter VP-5THD, 1:4 VGA/UXGA Distributor/CAT 5 Transmitter VP-5R, CAT 5 Receiver / 1:5 VGA/UXGA Distributor

  • Your VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor 15 Figure 8: VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor Table 8: VP-5R CAT 5 Receiver / 1:5 VGA/UXGA Distributor Features # Feature Function 1 POWER Switch Illuminated switch for turning the unit ON or OFF 2 LINE INPUT LEVEL Trimmer Adjusts 1 the video input level 3 LINE INPUT EQ. Trimmer Adjusts

  • Kramer VP-200XLT, Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter 9 Figure 3: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter Table 3: VP-200XLTHD XGA Line Amp / CAT 5 Transmitter Features VS Switch Slide the switch downward to change the VS polarity to negative polarity 1 ; slide the switch upward to retain the polarity (default) HS Switch Slide the switch downward to change the HS polarity to negative polarity 1 ; slide the switch upward to retain the polarity (default) 6 Your VP-300T 1:2 XGA DA/ CAT 5 Transmitter This section describes the topside (see sectio

More Instructions:

DOWNLOAD

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Novell LINUX ENTERPRISE DESKTOP 10 SP2 Installation novell/linux-enterprise-desktop-10-sp2-AO3.pdf 18 Jan 2024 5
2 Monacor MPX-4300E Instruction manual monacor/mpx-4300e-1Z6.pdf 18 Jul 2022 28
3 Currys Essentials CUF55W12 Instruction manual currys-essentials/cuf55w12-U65.pdf 01 Nov 2023 20
4 Rhodes VK-1000 Service notes rhodes/vk-1000-X6C.pdf 07 Jul 2022 30
5 Honeywell SiX Series Installation instructions manual honeywell/six-series-6I9.pdf 16 Dec 2023 6
6 FAAC XBFA ON Operation & user’s manual faac/xbfa-on-JY5.pdf 08 Oct 2022 2

Similar Resources:

  • Shure

    MX690

    (13 pages)
    MX690 MX890Desktop Base and Boundary MicrophoneThe Shure microflex wireless desktop base and boundary mircophone, MX690 and MX890, user guide.Version: 1.1 (2020-K) …
  • Bellman & Symfon

    BE1490

    (3 pages)
    Bellman Visit Baby Cry Transmitter, BE1490 Bellman Visit Baby Cry Transmitter, BE1490 (GB) Thank you for choosing products from Bellman & Symfon. The Bellman Visit 868 System consists of a number of radio transmitters and receivers. The transmitters detect different events in the surrounding area and transmit a radio signal to the receivers. Th …
  • Endress+Hauser

    FHX50

    (8 pages)
    Installation InstructionTransmitter electronics FHX50Levelflex FMP5x, Micropilot FMR5x, Promass 200, Prowirl 200, Promag 200, Prosonic Flow 200EA01064F/00/A2/03.1571279010Instruction is valid for the following spare part set: Designated useThe spare part set and Installation Instruction are used to replace a faulty unit with a functioning unit of the same …
  • GEIGER

    GF0021

    (2 pages)
    1: GF0021/-27 Display LCD: Display time or text menu Display weekday Display time shift Display „Auto“ (automatic) or „Hand“(manual) Display holiday function Display direction (UP /DOWN) Display code selection 4: GF0021/-27 Menu setup: In programming mode there is a total of seven menu items. Use UP/DOWN keys to select options. Au:Hd (automati …
  • Audio Technica

    1800 Series

    (19 pages)
    wirelesswirelesswirelesswirelesswireless1800 SeriesCamera-mount UHF Wireless Microphone Systems (dual-channel)AT W - R1810Plug-on Transmitter SystemAT W -T1801UniPak Body-pack Transmitter SystemAT W -T1802Plug-on and Body-pack Transmitter SystemInstallation and OperationInstallation et UtilisationInstallation und Betrieb Instalación y ManejoInstallazione e …
  • Genie

    IPOC7T

    (2 pages)
    Ver. 2017.4.1Quick Installation GuidePowering and connecting 7 network cameras over legacy 75ohm coaxial cables.Please read and understand thoroughly this quick installationguide before using and keep it for future reference.7-BNC PORT PoC & EoCSWITCHCAT-5eCABLEDC48V POWERNVR/ROUTERThis IPOC7T is designed for upgrading analog camera system into network I …

Comments, Questions and Opinions: