Kramer RC-IR2 Operation & User’s Manual
|
Kramer RC-IR2, Contents i Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 4 Your RC-IR2 Remote Control Transmitter 3 5 Your Remote Receiver 5 5.1 Identifying the Built-in Infrared Receiver 5 5.2 Connecting the External Infrared Receiver 5 5.3 Using the RC-IR2 Remote Control Transmitter 7 6 The General (Gray) Keys 7 7 The Router Mode Keys 8 7.1 Configuration 8 7.2 Initializing the RC-IR2 9 7.2.1 Assigning the ROUTER Number 9 7.2.2 Assigning the GROUP Number 9 7.3 Using the RC-IR2 keys in the ROUT
KRAMER: SIMPLE CREATIVE TECHNOLOGY Contents ii Figures Figure 1: RC-IR2 Remote Control Transmitter 3 Figure 2: Built-in Remote Receiver 5 Figure 3: Connecting the External Remote Receiver 6 Figure 4: VP-23N Switcher Selector Buttons 14 Figure 5: VP-26 Switcher Selector Buttons 16 Tables Table 1: RC-IR2 Remote Control Transmitter Fea
Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 2 3 Overview The high performance Kramer RC-IR2 is an upgrade of the popular RC-IR1, with additional functionality that lets you control Kramer scalers as well as switchers. The RC-IR2: Is a hand held infrared remote control transmitter 1 that includes the protocols of all Kramer devices and is programmable to control any Kramer machine (see Figure 1) Transmits to a compatible remote receiver, either built-in (see Figure 2) or external (see Figure 3). The tran
Kramer RC-IR2, Your RC-IR2 Remote Control Transmitter 3 4 Your RC-IR2 Remote Control Transmitter Figure 1 and Table 1 define the RC-IR2 remote control transmitter: POWER:Cycles power Button colors key: The red LED lights when sending instructions Routers/Switchers General WHITE GRAY BLUE Scalers Figure 1: RC-IR2 Remote Control Transmitter
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY Your RC-IR2 Remote Control Transmitter 4 Table 1: RC-IR2 Remote Control Transmitter Features Keys Function ROUTER Mode 20 buttons for selecting the channels, the group, the machine number, machine type and so on (see section 7) Source Selector 18 source selector keys: AV1, AV2, AV3, AV4, YC1, YC2, YC3, YC4, COMP1, COMP2, COMP3, COMP4, VGA1, VGA2, VGA3, VGA4, DVI1 and DVI2 FREEZE Pauses the output video Selector Buttons SCALER Mode
Kramer RC-IR2, Your Remote Receiver 5 5 Your Remote Receiver This section includes details of: The built-in front panel remote receiver (see section 5.1) How to connect the external remote receiver (see section 5.2) 5.1 Identifying the Built-in Infrared Receiver Most Kramer switchers 1 include a built-in front panel remote receiver that is located to the left of the power switch, as Figure 2 illustrates: IR Receiver LED Figure 2: Built-in Remote Receiver 5.2 Connecting the External Infrared Receiver When your RS-232 con
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY Your Remote Receiver 6 To connect the external remote receiver, as the example in Figure 3 illustrates, do the following: 1. Connect the external remote receiver to the RS-232 port on the Kramer switcher, via one of the following methods: A direct one-to-one connection, by simply connecting the attached RS-232 cable’s 9-pin D-sub connector to the RS-232 9-pin D-sub port on the switcher An extended (up to about 25 meters) one-to-one connection, by connecting a flat cable, or by just connecting PIN # 2 to PIN # 2, PIN # 3 to PIN # 3, and PIN # 5 to PIN # 5 (ground) between the a
Kramer RC-IR2, The General (Gray) Keys 7 5.3 Using the RC-IR2 Remote Control Transmitter The RC-IR2 Remote Control Transmitter includes three types of keys: the General keys 1 , the ROUTER 2 keys and the SCALER keys. The following sections describe how to use the: General keys (see section 6) ROUTER keys (see section 7) SCALER keys (see section 8) By design, every keypad operation is subject to a 10 second timeout. Failure to fully execute an action within 10 seconds will necessitate restarting that action. 6 The General (Gray) Keys The RC-IR2 includes a power ON button, a red transmission LED, which illuminates when pr
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY The Router Mode Keys 8 7 The Router Mode Keys This section describes how to: Configure the RC-IR2 (see section 7.1) Initialize the RC-IR2 (see section 7.2) Use the ROUTER Mode keys (see section 7.3) 7.1 Configuration For the RC-IR2 to identify the switcher that it has to control, a ROUTER number (see section 7.2.1) and a GROUP number 1 (see section 7.2.2) need to be assigned for specific identification of each switcher. Older Kramer products were arranged in several groups according to several criteria, such as the protocol type and version, the baud
Kramer RC-IR2, The Router Mode Keys 9 7.2 Initializing the RC-IR2 Table 2 describes the initializing sequence: Table 2: RC-IR2 Initializing Sequence Press To IR LED Behavior on the Switcher Front Panel See Section <-> Select single digit ON and then OFF 7.3.1 ROUTER Select the machine number ON 7.2.1 1 or other Set the machine number OFF Group Select the Group number ON 7.2.2 12 or 11 (if the switcher has one output only 1 ) or other for old protocols Set the
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY The Router Mode Keys 10 Table 2 defines the allocation of machines to groups, and Table 4 defines the group criteria: Table 3: Group Definition Specifications for Older Machines Group 1 Products SD-7308; VP-61xl/N; 2031n; VS-401, VS-601, VS-801; VS-401N, VS-601N, VS-801N Group 2 Products VS-402, VS-602, VS-802, VS-1202 (BUS A) Group 3 Products VS-402, VS-602, VS-802, VS-1202 (BUS B) Group 4 Products 2081; VS-2481, 2016; VS-2053 Group 5 1 Products VS-4x4YC Group 6 1 Products
Kramer RC-IR2, The Router Mode Keys 11 Table 2 is valid as per January 2004. Newer machines (using Protocol 2000) may be programmed for Group 12 or 11. Table 4: Group Definition Criteria for Older Machines Group Speed 1 1, 2, and 3 1200 4, 5, 6, 7, 9, 10 12, 14, 15, 16, 17, 18 and 20 9600 Group Maximum # of Units per Group Groups 7 2 , 9 and 10 1 Groups 1, 2, 3, 5, 6, 15, 17, and 18 8 Groups 4, 12, 14, and 16 16 7.3 Using the RC-IR2 keys in the ROUTER Mode The following sections describe how to: Use the <-> and <--> keys for selecting the single or the double digit modes (see section 7.3.1) Switch an input to an output (see section 7.3.2)
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY The Router Mode Keys 12 7.3.2 Switching an Input to an Output To switch an input to an output after assigning the machine number and group number, do the following: 1. Press a Selector key number for the output 1 . 2. Press a Selector key number for the input. For example, to switch INPUT 3 to OUTPUT 5 on a switcher, press <5> and then <3> (in the single digit mode). In the double-digit mode, press the <--> key and then <0/10>, <5> and <0/10>
Kramer RC-IR2, The Router Mode Keys 13 7.3.4 The TAKE Key You can use the TAKE key to key-in several actions and then confirm them by pressing the TAKE key, to simultaneously activate the multiple switches. Otherwise: OUT-IN combinations can be executed one at a time Pressing an OUT-IN combination implements the switch immediately No protection is offered to allow the correction of an erroneous action before it is implemented The TAKE key on RC-IR2 can be used regardless of the state of the TAKE button on the switcher. 7.3.4.1 Confirming a Switching Action To confirm an action, using the
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY The Router Mode Keys 14 7.4 Controlling a Presentation Switcher This section describes how to control Presentation Switchers using the RC-IR2. To control the: VP-23N and the VP-23RC, see section 7.4.1 VP-26, see section 7.4.2 7.4.1 Controlling the VP-23N 1 via the RC-IR2 You can control the VP-23N Presentation Switcher using the RC-IR2 to do the following: Switch inputs to outputs (see section 7.4.1.1) Adjust the volume (see section 7.4.1.2) 7.4.1.1 Switching an Input to an Output The VP-23N P
The Router Mode Keys 15 To switch an input to an output, point the remote control transmitter at the remote receiver and do the following: 1. Press the VIDEO key. 2. Press the group number 1 and then press any key from <1> to <4> to switch an input to the output. For example, to switch input 3 in the s-Video group to the output: Pr
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY The Router Mode Keys 16 Table 6: Audio Output Type Key for the VP-23N/VP-23RC Press key: To adjust the audio level of the: 1 CV group 2 s-Video group 3 VGA group 4 Microphone 5 Master audio out Decreasing the Volume of the VP-23N To increase the volume, point the remote control transmitter at the remote receiver and do the following: 1. Press the VOL- key. 2. Press the numeral key defining the audio signal 3 continuously until the volume decrease is satisfactory. 7.4.2 Controlling the VP-26 via the RC-IR2 You can control the VP-26
Kramer RC-IR2, The Router Mode Keys 17 Table 7: Groups Definitions for the VP-26 The Switcher Group Is defined as: VGA/UXGA 1 1 Video (CV) 1 2 s-Video (Y/C) 1 3 Comp 1 4 VGA/UXGA 2 5 Video (CV) 2 6 s-Video (Y/C) 2 7 Comp 2 8 To switch an input to an output, point the remote control transmitter at the remote receiver and do the following: 1. Press the VIDEO key. 2. Press the group number 1 and then press any key from <1> to <4> 2 to switch an input to the output . For example, to switch input 3 in the s-Video group to OUTPUT 2: Press the VIDEO key Press 7 Press 3 To switch the master audio switc
KRAMER: SIMPLE CREATIVE TECHNOLOGY The Router Mode Keys 18 To increase the volume, point the remote control transmitter at the remote receiver and do the following: 1. Press the VOL+ key. 2. Press the numeral key defining the audio signal 1 continuously until the volume increase is satisfactory. Table 8: Audio Output Type Key for VP-26 Press key: To adjus
Kramer RC-IR2, Operating in the Scaler Mode 19 8 Operating in the Scaler Mode The RC-IR2 includes the main 1 SCALER functions; other functions can only be accessed via the OSD menu keys. To recognize a Kramer machine when operating in the Scaler Mode, using the RC-IR2, point the remote control transmitter at the remote receiver and do the following: 1. Press the SCALER key. 2. Press the appropriate # key (from 1 to 5), according to the following: For VP-720xl, press 1 For VP-719xl, press 2 For VP-723xl, press 3 For VP-724xl, press 4 For VP-725DS and VP-725DSA, press 5 The LED lights once. The RC-IR2
Kramer RC-IR2, KRAMER: SIMPLE CREATIVE TECHNOLOGY 20 LIMITED WARRANTY WHO IS PROTECTED? WHAT IS COVERED AND WHAT IS NOT COVERED WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR HOW YOU CAN GET WARRANTY SERVICE LIMITATION OF IMPLIED WARRANTIES EXCLUSION OF DAMAGES CAUTION! Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the following terms. Kramer HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. Only the first purchase customer may enforce this warranty. We will pay labor and material expenses for covered items. We will not pay for the following: The
Kramer RC-IR2, Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000257 REV 4 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Caution Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Philips SRP5004/87 Remote Control Quick start manual
SRP5004/87 |
Kramer RC-IR1 Remote Control Operation & user’s manual
RC-IR1 |
Philips US2-PM725SK Remote Control Operation & user’s manual
US2-PM725SK |
Kramer RS-232 Remote Control Operation & user’s manual
RS-232 |
Kramer VS-3000 Remote Control Operation & user’s manual
VS-3000 |
Bose 3-2-1 GSX SERIES III Remote Control Manual
3-2-1 GSX SERIES III |
Philips TSU9800 Remote Control Specification sheet
TSU9800 |
Kramer RC-80 Remote Control Operation & user’s manual
RC-80 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Whirlpool | 4GWTW4740 | Installation instructions manual | whirlpool/4gwtw4740-F9H.pdf | 18 Jan 2023 | 27 | |
2 | twisted electrons | hapiNES L | Operation & user’s manual | twisted-electrons/hapines-l-51R.pdf | 22 May 2023 | 10 | |
3 | Quiet Breeze | OHQB13412 | Installation and repair manual | quiet-breeze/ohqb13412-Z3A.pdf | 29 Nov 2022 | 21 | |
4 | Valcourt | FP11 FRONTENAC | Installation and operation manual | valcourt/fp11-frontenac-3DI.pdf | 06 Apr 2023 | 64 | |
5 | Hasbro | G.I. Joe Cobra Fury | Instructions | hasbro/g-i-joe-cobra-fury-V59.pdf | 23 Nov 2022 | 2 | 3.03 Mb |
6 | nomad | NM30110A00 | Operation & user’s manual | nomad/nm30110a00-V8O.pdf | 20 Feb 2023 | 2 |
Genie
ATTENTION:Your garage door opener must have a Serial 10 or higher.MODEL AC SR3 THE GENIE COMPANYFCC ID: B8Q AC SR3 Residential Door OperatorIC: 2133A-CSD1D 120V. 60HZ. 5AFOR HELP CALL 1-800-35-GENIE OR VISIT WWW.GENIECOMPANY.COMS/N:10XXXXXXXXXXXXClosed Confirm™ RemoteClosed Confirm™ a distanciaClosed Confirm™ RemoteInstallation and OperationOne Clos …
Confirm(2 pages) |
FUTABA
FDLS-1Dual RX Link systemHow to Use How to Use LED IndicationLED IndicationPrecautionsPrecautions1. Install two receivers on the aircraft as shown in the wiring diagram on the next page.2. Link the two receivers using the dual receiver feature of the transmitter. For systems without dual receiver capability, link each receiver in turn.WARNING Failure to …
FDLS-1(2 pages) |
Swann
At a GlanceThank you for choosing the SwannOne™ Key Fob. The SwannOne Key Fob allows you to activate Home, Away and Night modes without the need for a Smartphone. FCC StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must …
SwannOne SWO-KEF1PA(2 pages) |
Philips
EN QuickStartGuide1 SwitchONyourdevice2 Press and hold thedeviceselectionkey(e.g. )for 5 secondsuntiltheredSetuplightremainslit.3 Lookupthe4-digitcodeforyourbrandintheadjacent‘Shortlistofbrands’. Enterthe4-digit� …
SRP4004/55(1 pages) |
MrCool
Please read this manual carefully before installation and keep it for future reference.Please keep this manual where the operator can easily find it. Inside, you will find helpful hints on how to use and maintain your unit properly. For more info visit www.mrcool.comUser ManualOlympus SeriesMid-Static Duct Air Handlers
…
Olympus Series(15 pages) |
Icom
INSTRUCTIONSDC POWER SUPPLYPS-12 5Thank you for purchasing the PS-125 DCPOWER SUPPLY. The PS-125 is designed forIcom equipments required 13.8 V DC/25 A(Max.). Please read these instructions thoroughlybefore operating the PS-125.• RNEVER apply AC voltage that exceeds thespecified voltage for the PS-125 rear panel.Excessive voltage could cause a fire or ruin …
PS-125(2 pages) |
HELIX Other X-JUSTX-JUST Operating instructions - OPDT9B X-JUST, 2 |
Agilent Technologies Network Accessory E6651AUser Guide: Agilent Technologies E6651A (OC8S8Z, Upd.Sunday 03-09-2023) E6651A, 186 |
Accu-Chek Blood Glucose Meter GoBlood Glucose Meter Operation & user’s manual (Accu-Chek Go) Go, 63 |
Lowrey Musical Instrument TGSLowrey TGS Musical Instrument Service manual TGS, 61 |
Volkswagen Automobile 2014 Passat2014 Passat Technical specifications - 4MK7BA 2014 Passat, 2 |
Philips Transmitter SBCHC552/05Philips SBCHC552/05 Guide (Instructions for use), @9JR7N1 SBCHC552/05, 1 |
Rinnai Oven RBO-85ETIXRinnai Oven RBO-85ETIX Operation & installation manual RBO-85ETIX, 64 |
Caliber Car Receiver MCD883MCD883 Operation instructions manual - XR89M3 MCD883, 16 |
Bosch Security Camera VCM8637/00TBosch VCM8637/00T Security Camera Installation instructions manual VCM8637/00T, 62 |
Newfire Kitchen Appliances Cascade#491233 Cascade: Newfire Kitchen Appliances Owner Documentation Cascade, 16 |
ADEMCO Security Sensors 650#288972 650: ADEMCO Security Sensors Owner Documentation 650, 18 |
BenQ Projector MW512MW512 Operation & user’s manual - 3K61G5 MW512, 70 |