Kyocera KM-3050 Operation Manual

Text of Kyocera KM-3050 User Guide:

• Kyocera KM-3050, Basic Operation 3-12 OPERATION GUIDE Manual Zoom Manually reduces or enlarges the original image in 1% increments between 25% and 400%. Preset Zoom Reduces or enlarges at preset magnifications. The following magnifications are available. 25 % 400 % Model Zoom Level (OriginalCopy) Inch Models 100%, Auto, 400% (Max.), 200% (STMT -> Ledger), 154%(STMT -> Legal), 129% (Letter -> Ledger), 121% (Legal -> Ledger), 78% (Legal -> Letter), 77% (Ledger -> Legal), 64% (Ledger -> Letter), 50% (Ledger -> STMT), 25% (Min.) Metric Models 100%, Auto, 400% (Max.), 200% (A5 -> A3), 141% (A4 -> A3, A5 -> A4), 127% (Folio -> A3), 106% (11×15" -> A3),

• Kyocera KM-3050, Maintenance OPERATION GUIDE 5-5 5 Put away the cleaning brush, press the specified position of the front cover and left cover 1 to close. Transfer Roller 1 Open the front cover. 2 Remove the cleaning brush (blue colored). 3 Pull up and open left cover 1.

• Kyocera KM-3050, Preparation before Use 2-10 OPERATION GUIDE Configuring a Network (LAN Cable Connection) The machine comes with a standard network interface and supports each of TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, allowing network printing on various platforms such as Windows, Macintosh, UNIX and NetWare. Setting TCP/IP (When Using Fixed IP Address) Follow the steps below to set TCP/IP when a fixed IP address is used. Make sure that an IP address is available by asking your network administrator to obtain it in advance. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of TCP/IP. 3 Press [On] of TCP/ IP. 4 Press [Off] of DHCP. 5

• Kyocera KM-3050, Appendix OPERATION GUIDE Appendix-9 Scanner Document Processor (option) Ethernet 10BASE-T/100BASE-TX Network Protocol TCP/IP Color/ Monochrome Both color and monochrome Transmission System PC transmission SMB Scan to SMB FTP Scan to FTP E-mail transmission SMTP Scan to E-mail TWAIN scan TWAIN source Resolution 600 dpi, 400 dpi, 300 dpi, 200 dpi, 200 ×100 dpi, 200 × 400 dpi (* Resolution in FAX mode included) Gradation B/W: (a) Text mode: Binary/dot 256 gradations (error diffusion) (b) Photo mode: Binary/dot 256 gradations (error diffusion) (c) Text/Photo mode: Binary/dot 256 gradation

• Kyocera KM-3050, Preparation before Use 2-40 OPERATION GUIDE Selecting Paper Size and Media Selecting Paper Size and Media Type for the Cassettes When you use the cassettes 1 or 2 or the optional side feeder (cassettes 3 and 4), select the paper size and media type you load. When you use the optional side feeder (cassette 3) of up to 3,000 sheets capacity, select the media type only. 1 Press the System Menu key. 2 Press [Common Settings], [Next] of Original/Paper Setup, [Next] of Cassette setting. 3 In Cassette Settings, select one of [Cassette 1] to [Cassette 4] and press [Next]. Then press Paper Size -> [Change]. Selection Item Sele

• Basic Operation OPERATION GUIDE 3-11 1 Set the original on the platen and press [Image Quality] -> [Original Image]. 2 Select the image quality. 3 Press [OK]. Press the Start key. Copying begins. Zoom Copying Adjust the magnification to reduce or enlarge the original image. The following zoom options are available. Auto Zoom Automatically reduces or enlarges the original image suit

• Kyocera KM-3050, Basic Operation 3-22 OPERATION GUIDE Sending This machine can send a scanned image as an attachment to an E-mail message or to a PC linked to the network. In order to do this, it is necessary to register the sender and destination (recipient) address on the network. A network environment which enables the machine to connect to a mail server is required. It is recommended that a Local Area Network (LAN) be used to assist with transmission speed and security issues. At the same time as you send a scanned image,

• Kyocera KM-3050, Legal and Safety Information iv OPERATION GUIDE • UFST™ MicroType ® fonts by Monotype Imaging Inc. are installed in this machine. • This machine contains the NF module developed by ACCESS Co., Ltd. • This machine contains the software having modules developed by Independent JPEG Group. • This machine has passed USB Implementers Forum certification testing. All other brands and product names are registered trademarks or trademarks of their respective companies. The designations ™ and ® will not be used in this Operation Guide. GPL Firmware

• Kyocera KM-3050, Optional Equipment OPERATION GUIDE 4-7 3 Remove the empty staple case from the staple holder. 4 Holding the staple holder in your left hand and a new staple case in your right hand, insert the staple case into the staple holder in the direction of the arrow. 5 Insert the staple case fully as far as it will go. Pull to remove the paper tape wound on the staple case. 6 Insert the staple holder into the slot of the staple unit again. When fully inserted, the staple holder locks with a clicking sound.

• Legal and Safety Information OPERATION GUIDE xi Installation Precautions Environment CAUTION Avoid placing the machine on or in locations which are unstable or not level. Such locations may cause the machine fall down or fall over. This type of situation presents a danger of personal injury or damage to the machine. Avoid locations with humidity or dust and dirt. If dust or dirt b

• Kyocera KM-3050, Preparation before Use OPERATION GUIDE 2-35 3 Using the paper length adjusting tab, move the plate to fit the paper. NOTE: Paper sizes are indicated on the cassettes. To change between inch size and metric size (A, B sizes), follow the steps below to adjust the size switch. 1. Holding the paper width adjusting tab, move the paper width guide to a position other than that of the paper. 2. Turn the size switch A 90°. > 3. Move the size lever B up (C) or down (I). C:metric size (centimeters) (A, B sizes) I:inch size 4. Turn the size switch 90°to lock it. > 4 Align the paper flush against the left side of the cassette.

• Kyocera KM-3050, Preparation before Use OPERATION GUIDE 2-23 1 Click Basic -> Address Book Groups -> Add Group. 2 Enter the correct settings in each field. Enter the following settings in the Add Group screen. 3 Click Submit. Item Description Number Enter the group number. You can enter any number between 1 and 2500. If you enter a number that is already being used and click Submit, an error message appears. Group Name Enter the group name. The maximum length of the group name is 32 characters.

• Kyocera KM-3050, Basic Operation OPERATION GUIDE 3-19 2 To use collate copying, press [On] of Collate. To use offset copying, press [Each set] of Offset. Press [OK]. 3 If [Off] is selected for Collate, press [Off] or [Each Page] in Offset. 4 Press [OK]. 5 Use the numeric keys to enter the copy quantity. 6 Place the originals and press the Start key. Copying begins. Status 10/5/2006 10:10 Ready to copy. Copies Cancel OK Collate/Offset Press [OK] to display Add Shortcut Off Each Set Off On Collate Offset 1 the image. Statu

• Kyocera KM-3050, OPERATION GUIDE 4-1 4 Optional Equipment This chapter introduces the optional equipment available for the machine. • Overview of Optional Equipment.................................. 4-2 • Document Processor.................................................... 4-4 • Paper Feeder ............................................................... 4-4 • 3000 Sheet Paper Feeder............................................ 4-5 • Built-in Finisher............................................................. 4-5 • Document Finisher ...

• Kyocera KM-3050, Basic Operation 3-28 OPERATION GUIDE Select a destination and press [Delete] to remove the destination from the list. 10 Change the original size, scan resolution, etc. if necessary. 11 Press the Start key. The scanned original data file is sent to the specified shared folder of the PC. Send to Folder (FTP) Stores a scanned original image in a folder of an FTP server. NOTE: Be sure that FTP of COMMAND CENTER is On. Refer to FTP Settings on page 2-19. 1 Place the originals on the platen or in the optional document processor. NOTE: For loading instructions, refer to Loading Originals on page 2-45. Status 10/5/2006 10:10 Place original. Ready to send. Desti

• Kyocera KM-3050, Maintenance 5-12 OPERATION GUIDE IMPORTANT: Do not wash the filters with water. Do not use the attached cleaning brush. 19 Put the filters back in place and close the Multi Purpose Tray. NOTE: Return the exhausted toner container and waste toner box to your dealer or service representative. The collected toner container and waste toner box will be recycled or disposed in accordance with the relevant regulations.

• Kyocera KM-3050, Troubleshooting 6-14 OPERATION GUIDE 2 Remove the jammed paper. 3 Pull out cassette 1. 4 Remove the jammed paper. If the paper tears, remove every loose scrap from inside the machine. 5 Push cassette 1 back in place securely. 6 Press the specified position to close left cover 1.

• Basic Operation 3-36 OPERATION GUIDE 7 Click the Detail button to display the selected document data. When the document data includes multiple pages, select the checkbox beside the pages you want to scan. The selected pages will be scanned. 8 Click the Acquire button. The document data is scanned.

• Kyocera KM-3050, Index OPERATION GUIDE Index-3 Option Interface Slot 1-4 Original Loading in the Document Processor 2- 47 Placing on the Platen 2-45 Size xxiv Original Cover 1-2 Cleaning 5-2 Original Placement Indicator Indications and Status 2-49 Original Size Indicator Plates 1-2, 2-45 Original SSLeay License v P Paper Before Loading 2-33 Checking Remaining 3-58 Loading Envelopes 2-38 Loading in the Cassettes 2-34 Loading in the Multi Purpose Tray 2-36 Size and Media 2-40 Paper Feed Unit 1-3 Paper Feed Unit Cover 1-3 Paper Jam 6-12 Built-in Finisher 6-23 Cassette 1 6-13 Cassette 2 6-15 Cassettes 3 and 4 6-16 Document Finisher 6-26 Document Processor 6-24 Duplex Unit 6-18 Duplex Unit

• Kyocera KM-3050, Preparation before Use 2-6 OPERATION GUIDE Connecting Parallel/USB Cable (Optional) Follow the steps below to connect a parallel or USB printer cable to the machine. 1 When the machine is powered up, first press the Power key on the operation panel. Check that the Power indicator and the memory indicator are off. After this, turn off the main power switch. 2 If connection is established using a parallel cable, the PC to be connected should also be powered off. 3 Connect the printer cable to the approp

• Legal and Safety Information OPERATION GUIDE ix Safety Conventions in This Guide The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the machine. The symbols and their meanings are indicated below. Symbols The U symbol indicates that the related se

• Kyocera KM-3050, Troubleshooting 6-2 OPERATION GUIDE Solving Malfunctions The table below provides general guidelines for problem solving. If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the following pages. If the problem persists, contact your Service Representative. Symptom Checkpoints Corrective Actions Reference Page The operation panel does not respond when the main power switch is turned on. Is the machine plugged in? Plug the power cord into an AC outlet. — Pressing the Start key does not pr

• Kyocera KM-3050, Appendix Appendix-12 OPERATION GUIDE Built-in Finisher Environmental Specifications NOTE: Consult your dealer or service representative for recommended paper types. Number of Trays 1 tray Paper Size Ledger, Legal, Oficio II, 8.5×13.5", A3, B4, Folio: 250 sheets (Non-Stapling) Supported Paper Letter, Letter-R, A4, A4-R, B5: 500 sheets 60 to 80 g/m 2 Maximum Sheets for Stapling Ledger, Legal, A3, B4, Folio: 20 sheets Letter, Letter-R, A4, A4-R, B5: 30 sheets (Paper weight 80 g/m 2 or less) Dimensions (W) × (D) × (H) 12 3/16

• Kyocera KM-3050, Appendix OPERATION GUIDE Appendix-3 Upper-case Letter Entry Screen Number/Symbol Entry Screen 10 [Cancel] Press to cancel entered characters and return to the screen before the entry. 11 [OK] Press to finalize entry and return to the screen before the entry. No. Display/Key Description Use the keyboard to e nter. Backspace Upp er-ca se Lower-case No./Symbol Space Cancel OK Path Input: characters Li mit: characters 0 126 No. Display/Key Description 12 [S]/[T] To enter a number or symbol not shown in the keyboard, press the cursor key and scroll the screen to view other numbers or symbols to enter. Use the keyboard to e nte r. Bac

• Kyocera KM-3050, Troubleshooting 6-18 OPERATION GUIDE 1 Open the left cover where the paper is jammed inside. 2 Remove the jammed paper. If the paper tears, remove every loose scrap from inside the machine. 3 Close the left cover. Duplex Unit Follow the steps below to clear paper jams in the duplex unit. 1 Pull up left cover 1 lever and open the left cover. 2 Remove the jammed paper.

More Instructions:

	Kyocera KM-3050 Operation manual 02-03-2024 260	DOWNLOAD
	Kyocera KM-3050 Operation manual 14-11-2022 200	DOWNLOAD
	Kyocera KM-3050 Manual  20-04-2023 36	DOWNLOAD
	Kyocera KM-3050 Operation manual 05-04-2023 64	DOWNLOAD

Related Products and Documents (Scanner):

Comparable Devices:

Similar Resources:

• Omron OS3101 (14 pages) CSM_OS3101_DS_E_3_11Safety Laser ScannerOS3101Operator Presence Detection in Work Areas with Complex Shapes• A Type 3 Safety Laser Scanner in compliance with IEC 61496-1/-3.FeaturesThe OS3101 Safety Laser Scanner is designed for use in hazardous zones that change irregularly. Parameters for even highly complex areas can be easily set using personal comp …

• Banner iVu PLUS TG (12 pages) Quick Start GuideIntroductionThis guide is designed to help you set up and install the iVu Plus TG and Color Gen2 Image Sensors. For complete information onprogramming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Search for p/n 179042 to view the Instruction Manual. Use of th …

• Kodak i5800 (2 pages) Simplify workflow. Reduce capture costs. Automatically separate and reuse patch sheets, image checks and correspondence in one step, and gain other productive advantages Streamline your workflow by imaging checks and correspondence in a single step. Eliminate digging through output stacks to find suspect documents and recover from multifeed events faster …

• Sharp MX-2700N Guide (7 pages) 1 Sharp Copier - MX-2700N, MX-2300N SCAN TO E-MAIL - BASIC INSTRUCTIONS 1 Load the original in the automatic document feeder or directly on the document glass. NOTE : You cannot load documents in both the automatic document feeder and on the document glass and send them in a single transmission. 2 Press the [IMAGE SEND] button 3 You can manually …

• Feig Electronic OBID Classic-Pro Series (126 pages) MANUAL preliminary public (B) 2011-08-18 H01114-0E-ID-B.doc ID CPR30.xx RFID Reader for ISO/IEC14443-A & -B, NFC and ISO/IEC15693 Up From Firmware Version 01.02.00 …

• Vishay 7000 (142 pages) Vishay Micro-Measurements P. O. Box 27777, Raleigh, North Carolina, 27611, USA Phone (919) 365-3800 Fax (919) 365-3945 www.vishay.com System 7000 Scanner Programmer’s Reference Manual Version 1.01 130-000197 Document Number: 49897 …

Comments, Questions and Opinions: