Legacy LDCS 91 Owner's Manual

Text of Legacy LDCS 91 User Guide:

• Legacy LDCS 91, 1. Take care of your tape cassette to preserve the quality of the recordings. Do not allow them to be exposed to direct sunlight. Store them in a place protected from dirt and dust and avoid handing with greasy or oily hands. Also, keep the away from magnets, and motors of the permanent magnet type. 2. It is not advisable to use cassette tapes longer than C-60 (30 minutes per side) in automobile players, since the tape is too thin and tends to become easily entangled. Always remove cartridge from your tape player as soon as play is finished. 3. The capstan and tape head should be cleaned about once every six months with a soft cloth or cotton-wool swab, moistened with al

• Legacy LDCS 91, This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. TROUBLE SHOOTING Before going through the check list, check wiring c

• Legacy LDCS 91, 14 BASIC OPERATION 17. / BUTTONS A. When long pressing the / button (more than 2 seconds) during play, the speed of rapid forward/reverse changes according to the disc as follow. DVD: VCD/CD: Normal Playback 2X 4X 6X 8X Normal Playback 2X 3X 4X MP3: Normal Playback 2X 4X B. Shortly press the / button during playback to skip to next track or back one track. Note: For some VCD2.0 discs (PBC-playback control), and buttons may be unavailable. C. Press UP or DN button on the remote controller or / on the front panel to manually tune up or down for your desired station. Press the

• Legacy LDCS 91, BASIC OPERATION 17 Multi-subtitle Language Function (For DVD only) Press SUBTITLE during playback. Each time the button is pressed, number of the subtitle language changes in sequential order. Notes: The language number is different according to the disc. Some discs only contain one subtitle language. When no different subtitle language are recorded, will be displayed at screen left top corner. Multi-angle Function (For DVD only) Press ANGLE during playback. Each time the button is pressed, number of the angle changes in sequential order. Notes: The angle number is different according

• Legacy LDCS 91, Disc formats supported by this player DVD 12 cm disc (Single-sided disc only) Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with this player • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation. • Do not place stickers or make scratches on discs. • Do not warp discs. • A disc should always be kept in its case when not in use to prevent from damaging. • Do not place discs in th

• Legacy LDCS 91, 24 SPECIFICATIONS Supply voltage : 12V DC (11V-15V) Current consumption : Less than 10A Signal system : Compositive video 1.0Vp-p 75Ω Discs played : (1) DVD-VIDEO disc 5”(12 cm) single-sided, single-layer 5”(12 cm) single-sided, double-layer (2) Compact disc (CD-DA,VIEDO CD) 5”(12 cm) disc Audio Signal Output : 2ch & 4ch line out Characteristics : (1) Frequency Response: 20 Hz-20 kHz (2) S/N Ratio: 90 dB (JIS) (3) Wow and Flutter: Below measurable limits TAPE SECTION Wow & Fluter : 0.3% S/N Ratio (Normal) : 52 dB Separation : 45 dB Frequancy response : 50Hz-15

• Legacy LDCS 91, 16 BASIC OPERATION c. Press OSD for the third time: T:01/18 P: 00:00:25 LR DISC TOTAL ELAPSED d. Press OSD for the fourth time: T:01/18 P: 00:00:25 LR DISC TOTAL REMAIN e. Press OSD for the fifth time: The message on the screen will be cleared for SVCD and VCD. Note: For CD and Mp3, the message will always display on the screen. C. Example for MP3: Each time OSD is pressed, the message displayed on screen changesas follows: On-Screen Display Function Press the OSD button during playback to display the contents of the current disc on the screen. A. Example for DVD: a. Press OSD for the first time: TITLE 01/03

• Legacy LDCS 91, SAFETY INFORMATION 2 CAUTION: THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICINGTO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THI

• Legacy LDCS 91, --- GENERAL PAGE --- 2. PIC MODE SETUP Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on format on image or picture under noise affect. --- GENERAL PAGE --- 3. ANGLE MARK DISPLAY SETUP If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if it is set to OFF, the mark will not appear. --- GENERAL PAGE --- 4. OSD LANG TYPE SETUP Select the preferred OSD language by using the / buttons. --- GENERAL PAGE --- 5. CAPTIONS SETUP Activate the CAPTIONS feature by selecting ON. And release this feature by selecting OFF. TV DISPLAY PIC MODE

• Legacy LDCS 91, 15 BASIC OPERATION 24. FLASHING LED If the front panel is not on the main unit, LED will be flashing. 25. RESET BUTTON RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display. Note: If press RESET button, the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel. 26. THE CHANGE-OVER SWITCH OF FREQUENCY (option) Slide it you can s

• Legacy LDCS 91, 1. Install brackets and screws removed from your old radio (not provided with this unit). 2. Slide unit and frame into dash opening. 3. Trim ring has precutgrooves on the back of it. The size of the trim ring can be reduced (made smaller) for different types of installations. Hold the trim ring firmly in one hand, and using a pair of pliers, grasp the trim ring above the score line (groove) and bend gently back and forth a couple of times. Then the piece should break away. 4. Install dash panel. 5. Install face

• Legacy LDCS 91, --- PREFERENCES PAGE --- 3. SUBTITLE LANGUAGE SETUP Select the preferred SUBTITLE language by using the cursor buttons. --- PREFERENCES PAGE --- 4. DISC MENU LANGUAGE SETUP Select the preferred DISC MENU language by using the cursor buttons. --- PREFERENCES PAGE --- 5. PARENTAL Select suitable parental guidance by the cursor buttons and confirmed by pressing ENTER button. --- PREFERENCES PAGE --- 6. PASSWORD Select the change and press ENTER button. Type the old password (The initial factory code is 3308) and key in 4 characters

• Legacy LDCS 91, Video Material Normal TV Screen Pan Scan Letter-box 4:3 Wide (16:9) 4:3 16:9 GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP TV DISPLAY PIC MODE ANGLE MARK OSD LANG CAPTIONS SCR SAVER MAIN PAGE NORMAL/PS NORMAL/LB WIDE 18 SETUP INITIAL SETUP --- MAIN PAGE--- 1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player under STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the preferred item by using the / buttons. 4. Press ENTER buttons. A. GENERAL SETUP This setup page includes all the item of TV dis

• Legacy LDCS 91, --- GENERAL PAGE --- SCR SAVER SETUP Select the SCR SAVER output ON/OFF. SPEAKER SETUP --- SPEAKER SETUP PAGE --- This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. - Select the LT/RT to activate the Dolby surround compatible output. - Select the STEREO to activate simple stereo mode. AUDIO SETUP --- AUDIO SETUP --- 1. AUDIO OUT This is to activate the audio output from ANALOG mode to SPDIF/RAW mode to

• 13 BASIC OPERATION a. Continuously repeat at the current chapter/track, when selected REP-ONE mode. b. Select REP-ALL mode to continuously repeat all chapter/track on the current disc. c. REPEAT feature does not support VCD2.0 (with PBC ON). E. Press 3/INT button to scan disc. a. In the state of VCD/CD disc playing, press the 3/INT button on the front panel to p

• Legacy LDCS 91, INSTALLATION NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in

• Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new batteries.Make sure that the positive and negative terminals of the batteries are oriented indicated. 3. Close the cover Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal receiver). Operation an

• Legacy LDCS 91, General Setup TV Display Normal/PS PIC Mode AUTO Angle Mark ON OSD Language English Captions OFF SCR Saver OFF Speaker Setup Downmix Stereo Audio Setup Audio Out Analog OP Mode Line Out Dynamic LPCM Out LPCM 96K Preferences TV Type MULTI Audio English Subtitle English DISC Menu English Parental NO PARENTAL Password 3308 Smart Nav With Menu --- PREFERENCES PAGE --- 7. DEFAULTS Select reset to become factory initial setting. --- PREFERENCES PAGE --- 8. SMART NAV In this item, you can select NO MENU mode or WITH MEN

• SETUP PREFERENCES SETUP --- PREFERENCES PAGE --- 1. TV TYPE SETUP This player can play discs recorded in either PAL or NTSC format. Select NTSC format, when you connected to NTSC TV. Select PAL format, when you connected to PAL TV. Select AUTO format, the player TV output format will according to the DVD disc format. --- PREFERENCES PAGE --- 2. AUDIO LANGUAGE SETUP Sel

Related Products and Documents (Car Stereo System):

Comparable Devices:

Similar Resources:

• Sony CDX-M630 (78 pages) 1Ver 1.2 2002. 11Model Name Using Similar Mechanism CDX-L300/L460XCD Drive Mechanism Type MG-393X-121//KOptical Pick-up Name KSS-720ASERVICE MANUALUS ModelCanadian ModelAEP ModelUK ModelE ModelCDX-M630• The tuner and CD sections have no adjustments.AUDIO POWER SPECIFICATIONS (US MODEL)POWER OUTPUT AND TOTAL HARMONIC DISTORTION23.2 watts per channel minimu …

• RCS CDP-10M (12 pages) OPERATING INSTRUCTIONS / BEDIENUNGSANLEITUNGCDR-10 RDS / CDP-10MCD/MP3 RDS-TUNERMODUL- ENGLISH- DEUTSCHLEVEL010CD PLAYERLEVEL010CD & RECEIVERRCS RADIO6STCHLOC LOUD PAUSE DISC RDM SCAN RPT02:34 - 14STCHLOC LOUD PAUSE DISC RDM SCAN RPTDIGITAL SOUNDCD-R/RW COMPATIBLEMODE BAND PTY AF/REG1/PL/PS2/INT3/RPTR/RST4/RDM5/D.DN6/D.UPDISPPOWER EJECTTUNETRACDIGITAL …

• ADS P450.2 (26 pages) table of contentsintroduction 1about this manual 2features of your PowerPlate™ 2warning and tips 3mounting locations 3system planning 4system configurations 4-10installation 11controls and connections 11-12signal sources 13-14internal signal routing 14-15multi-cross™ crossover and configurations 16-17AC502 operation 18tuning 18-19P450.2 block diagram 20P …

• Premier SCR-4637USID (35 pages) MANUAL DE INSTRUCCIONES CAR-AUDIO C/MP3 Y USB / SD SCR-4637USID ESTIMADO CLIENTE Con el fin de que obtenga el mayor desempeño de su producto, por favor lea este manual de instrucciones cuidadosamente antes de comenzar a utilizarlo, y guárdelo para su futura referencia. Si necesita soporte adicional, …

• Sony XS-V1633 Marketing (1 pages) Design and Specifications subject to change without notice.XS-V16333-Way Speaker2003 SONY MOBILE PRODUCT GUIDESpecificationsSpeaker Coaxial 3-way:Woofer 15.8 cm (6 1/4 in.) cone typeMidrange 3.5 cm (1 7/16 in.) balance dome typeTweeter 1.1 cm (7/16 in.) dome typePeak power 220 wattsRated power 50 wattsImpedance 4 ohmsSensitivity 91 dB/W/mFrequency response …

• PYLE Audio PLCD38 (4 pages) P / N : 570-981812-05Page. 1OWNER'S MANUALMODEL : PLCD38ANTI-SHOCK COMPACT DISC PLAYERAUXILIARY INPUT ANDSUPER POWER OUTPUTFOLD-DOWN FACE DETACHABLE PANELFM-AM FM-MPX RADIO RECEIVER WITH REMOTE CONTROL …

Comments, Questions and Opinions: