Manualios.com

Durabrand HT-377 Owner's Manual

Durabrand HT-377 Manual Online:

3.5, 2804 votes
Durabrand HT-377 User Manual
Durabrand HT-377 User Guide
Durabrand HT-377 Online Manual

Text of Durabrand HT-377 User Guide:

  • Durabrand HT-377, IB-HT377-WM-E-050405 MODEL HT-377 PLEASE READ CAREFULLY BEFORE USE 2.1 CHANNEL HOME THEATER SYSTEM • Compatible with MP3 & DVD Players, Computers and Game Consoles • Dual Stereo Inputs for Easy Connections - Includes All Cables • Active Subwoofer for Deep Bass • Tower Speakers are Wall Mountable with Removable Pedestals (bases) • Remote Control and Batteries Included • Operates on 120V AC Power IB-HT377-WM-E-050405.pmd 6/2/2005, 2:15 PM1

  • IB-HT377-WM-E-050405 SAFETY INSTRUCTIONS 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings, install in accordance with the manufacturer’s instructions. 8.Do not install near any heat sources such as radiators

  • Durabrand HT-377, IB-HT377-WM-E-050405 CAUTION FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it. FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will no

  • Durabrand HT-377, IB-HT377-WM-E-050405 INTRODUCTION Thank you for purchasing this 2.1 channel Home System. This deluxe audio theater system turns your home into a virtual theater. This system was designed to provide you with many years of reliable operation with a minimum of care and maintenance. Every component in your system was perfect when it left our factory. If you experience any problem with the set-up or operation of this system, please review the Trouble Shooting Guide at the end of this manual before you contact the Customer Service Department at 1-800-315-5885. Basic Feat

  • Durabrand HT-377, IB-HT377-WM-E-050405 • Getting Started Safety Instructions--------------------------------------------------------------------------------------------1,2 Introduction-----------------------------------------------------------------------------------------------------3 Location of Controls------------------------------------------------------------------------------------------5,6 Remote Control Operation----------------------------------------------------------------------------------6,7 Positioning Information -------------------------------------------------------------------------

  • IB-HT377-WM-E-050405 5 LOCATION OF CONTROLS FRONT PANEL 1. REMOTE SENSOR - Receives the signal from the REMOTE CONTROL (aim theREMOTE control towards this sensor). 2.ON/STANDBY button - Press to switch the set to on or standby mode. 3.ON/STANDBY indicator - This indicator has 2 modes: flashing and steadily on (slow flashing indicates the set is in standby, steadi

  • Durabrand HT-377, IB-HT377-WM-E-050405 ON/STANDBY MUTE SOURCE LOCATION OF CONTROLS REMOTE CONTROL 2 3 5 4 6 1. IR DIODE - Sends the signal to the set. Do not block or cover this. 2.ON/STANDBY button - Switches the player from STANDBY to ON or ON to STANDBY. 3.MUTE button - Instantly turns off the sound. Press again to restore the sound. 4.SOURCE button - Press to select the sound input source you want: DVD or MP3. 5. VOLUME button - Press to decrease the volume. 6. VOLUME button - Press to increase the volume. 1 REMOTE CONTROL OPERATION Remove the BATTERY COMPARTMENT DO

  • Durabrand HT-377, IB-HT377-WM-E-050405 REMOTE CONTROL OPERATION Point the REMOTE CONTROL unit from less than 20 feet from the remote control sensor and within about 60 0 of the front of the HOME THEATER SYSTEM (not your TV set or DVD player). Remote Control Operation Range Tips on REMOTE CONTROL Operation • The operating distance may vary according to the brightness of the room. • Do not point bright lights at the remote control sensor (like laser pointers). • Do not place objects between the remote control unit and the remote cont

  • IB-HT377-WM-E-050405 SPEAKER SYSTEM CONNECTIONS Speaker System Connections Connect the supplied speaker system by matching the colors of the terminals to those of the cords. IMPORTANT: Before making connections, make sure the power is off. QUICK SETUP DIAGRAM NOTE: In order to have TV sound come through your home theater system, your TV must have AUDIO OUTPUT jacks. Th

  • Durabrand HT-377, IB-HT377-WM-E-050405 SPEAKER SYSTEM CONNECTIONS Tips for connecting the speaker wires Unwind and stretch out the speaker wires attached with each speakers, then push the set terminal tab on the back of the main set to insert each wire. Make sure the wire is fully inserted, but the insulation is not covering the inserted part of the speaker wires. SET TERMINAL PUSH THE TAB OF TERMINAL. STICK THE EXPOSED PART OF THE WIRE INTO THE HOLE OF THE TERMINAL. PUSH THE TERMINAL TO LOCK THE WIRE INSIDE THE TERMINAL. NOTE: Be sure to match the speaker wire to the appropriate terminal on the back of the main set: grey to grey, and black to black. If the wires are reversed, the sound will be distorted

  • Durabrand HT-377, IB-HT377-WM-E-050405 1. Insert the stereo audio cables (included) into the DVD INPUT LEFT and RIGHT jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jacks on your TV, this will allow your TV’s sound to play through your HOME THEATER SYSTEM. You will hear sound from both the TV and your HOME THEATER, this is normal. NOTE:On some TVs, you may have to activate the audio out jacks of your TV. See your TV’s booklet. 2. Insert the AC power cord into an AC outlet. 3. Make sure the POWER switch on the back of the main set i

  • Durabrand HT-377, IB-HT377-WM-E-050405 1. Insert the stereo audio cables (included) into the DVD INPUT LEFT and RIGHT jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jacks on your DVD player, this will allow your DVD’s sound to play through your HOME THEATER SYSTEM. 2. Insert the video cable into the VIDEO OUT jack on the back of your DVD player and into the VIDEO IN jack on the back of your TV set. This is especially convenient if your TV has several inputs. 3. Insert the AC power cord into an AC outlet. 4. Make sure the POWER switch on the back of the main set

  • Durabrand HT-377, IB-HT377-WM-E-050405 1. Insert the stereo audio cables (included) into the DVD INPUT LEFT and RIGHT jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jacks on your VCR, this will allow your VCR’s sound to play through your HOME THEATER SYSTEM. 2. Connections of your other antenna cables are not changed when you add your HOME THEATER SYSTEM. You will hear sound from both the TV and your HOME THEATER, this is normal. 3. Insert the AC power cord into an AC outlet. 4. Make sure the POWER switch on the back of the main set is at �

  • IB-HT377-WM-E-050405 RIGHT LEFT AUDIO D V D I N P U T M P 3 A U X I N P U T RED WHITE RED WHITE VIDEO OUTPUT VIDEO CAMERA TV GAME 1. Insert the stereo audio cables (included) into the DVD INPUT LEFT and RIGHT jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jacks on your TV Game or Video Camera, this will allow your TV Game or Vide

  • Durabrand HT-377, IB-HT377-WM-E-050405 1. Insert the green 3.5 mm audio cable (included) into the MP3/AUX INPUT jack on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jack on your MP3, PC, CD player, or other device, this will enable you to hear your components system through your HOME THEATER SYSTEM. 2. Insert the AC power cord into an AC outlet. 3. Make sure the POWER switch on the back of the main set is at “ON” position. Next press the ON/STANDBY button on the front of the main set or o

  • Durabrand HT-377, IB-HT377-WM-E-050405 ON/STANDBY MUTESOURCE AMPLIFIER IN MAIN SET REMOTE CONTROL CONTROL PANEL (ON THE FRONT OF THE SUBWOOFER) General 1 Make sure the POWERswitch on the back of the main set is at “ON” position. Next press the ON/STANDBY button on the front of the main set or on the REMOTE CONTROL to turn the set on (or standby). NOTE: The STANDBY indicator has 2 modes: flashing and steadily on (slow flashing indicates the set is in standby mode, steadily on indicates the set is on). When the set is on, pres

  • Durabrand HT-377, IB-HT377-WM-E-050405 AMPLIFIER IN MAIN SET About fuse replacement NOTE: Before attempting to change the fuse, the system must be unplugged from the wall outlet. In the unusual event that nothing lights up and no sound, your fuse may have blown. To check for a blown fuse, follow the steps below. 1. Open the fuse cover (on the back of the main set) by using a flat blade screwdriver to unscrew the fuse cover cap. 2. Examine the fuse. If a wire shows, the fuse is good. 3. If the wire is broken in the

  • Durabrand HT-377, IB-HT377-WM-E-050405 TROUBLE SHOOTING Symptom Remedy • No sound or only a very low-level sound is heard. • Distorted sound. 1.Check that the speakers and components are connected securely and correctly, make sure the stripped end of each speaker wires does not touch each other to avoid short-circuit of the speaker wires (see Page 8, 9). 2.Make sure your source (DVD or other) is plugged in and operating. Also check that component’s booklet, maybe you need adjust that component. 3.Check and make sure your DVD’s sound output is set to analog. For some DVDs, if the sound output is not set to analog, the audio cables may not be active

  • Durabrand HT-377, IB-HT377-WM-E-050405 Power requirements -------------------AC 120V, 60Hz Power consumption --------------------55 Watts Main set Dimensions ------------------5 5 / 8 X 10 1 / 4 X 9 7 / 8 inches / 143 X 260 X 251 mm Weight --------------------------2.86 kg Speaker Dimensions ------------------3 1 / 8 X 3 3 / 8 X 8 5 / 8 inches / 79 X 86 X219 mm Weight --------------------------0.29 kg General SPECIFICATIONS LENOXX reserves the right to make design and specification changes for product improvement

More Instructions:

DOWNLOAD

Related Products and Documents (Home Theater System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Wood Stone TRADITIONAL SERIES WS-TS-5-W Installation and operation manual wood-stone/traditional-series-ws-ts-5-w-9LW.pdf 02 Dec 2023 22
2 Uniden DECT1480 Operation & user’s manual uniden/dect1480-YBW.pdf 19 Jan 2023 28 1.39 Mb
3 Samsung SGH-i320 Operation & user’s manual samsung/sgh-i320-8Y1.pdf 18 Jul 2023 182
4 AEG LAVATHERM T 520 Operating instructions manual aeg/lavatherm-t-520-5D6.pdf 26 Sep 2023 36 0.56 Mb
5 Klipsch Cornwall III Owner's manual klipsch/cornwall-iii-556.pdf 16 Apr 2023 8
6 Metra Electronics 95-3527 Installation instructions manual metra-electronics/95-3527-7I9.pdf 19 Jan 2023 8

Similar Resources:

  • Pioneer

    LX03BD

    (2 pages)
    4<XRE3202-A>BDP-LX08SSP-LX03C D EA BSTANDBY / ONPULL OPENHDMIRECEIVERBDCLEARCHTOP MENUSETUPTOOLSSTHOMEMENURETURNCLASST.EDITHOME MEDIAGALLERYOUTPUTRESOLUTIONVIDEOSELECTPOPUPMENUMCACCSOUNDAUDIORECEIVERiPodBDSUBTITLEANGLEDISPLAYiPod/VOLINPUT MUTEVOLUMEFL DIMMERTV CONTROLSTENTERENTERTUNETUNEFM/AMTUNER12345678091/2HDMITViPod/LINESURROUNDADV SURRSOUNDRETRIE …
  • Philips

    MCM2000

    (3 pages)
    PhilipsMicro music systemMCM2000Relax to great musicObsessed with soundListen to all your favorites on your portable music player with USB Direct and MP3 Link. This Philips Micro system also plays MP3-CD, WMA-CD and CD-R/RW, and features Bass Reflex speakers for powerful and dramatic bass.Enrich your sound experience• Bass Reflex Speaker System delivers a …
  • RCA

    RTD316W

    (2 pages)
    Overview of ControlsImportant Safety Instructions Connections and Setup Connections and Setup Connections and SetupFCC Information Important InformationConnections and SetupRTD316Wuser manualPlease read and save for future referenceSome of the following information may notapply to your particular product; however, aswith any electronic product, precautions s …
  • Abit

    Arcadia SP-50

    (9 pages)
    Arcadia SP-50 User’s Manual� …
  • Nyne

    NHT5.1RGB

    (14 pages)
    1Thank you for purchasing this product.Please read this manual carefully so you will know how to operate your product properly. If there are any technical questions, please contact:Customer care: (805) 751-4812 & Live chatOnline support: www.nyne.com/supportIMPORTANTPlease enter below the Serial No. which is located on the exterior of the product. Retain …
  • Philips

    MX975D

    (116 pages)
    Color Television ChassisFR970/171931ServiceServiceServiceServiceManualContents Contents4. Mechanical Instructions 00 6. Block Diagrams and Testpoints 00 7. Electrical Diagrams and PWB's Diagram PWB WIRING DIAGRAM 1 0 FRONT PANEL & HEADPHONE BOARD SCHEMATIC 2 7 FTD DISPLAY PIN CONNECTIONS 3 13 TUNER BOARD SCHEMATIC - …

Comments, Questions and Opinions: