Manualios.com

LG iCAM4000 Quick Start Manual

LG iCAM4000 Manual Online:

3.95, 935 votes
LG iCAM4000 User Manual
LG iCAM4000 User Guide
LG iCAM4000 Online Manual

Text of LG iCAM4000 User Guide:

  • LG iCAM4000, COPYRIGHT © 2007 LG ELECTRONICS USA INC, ALL RIGHTS RESERVED. LG IrisAccess™ 4000: iCAM4000 Quick Start Guide The content of this document is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by LG Electronics USA Incorporated. LG Electronics USA Incorporated assumes no responsibility or liability for any errors or inaccuracies that may appear in the informational content contained in this document. Please remember that existing images or drawings that you may want to include in your document may b

  • LG iCAM4000, 1 Packing List What’s in the box • iCAM4000 - IrisCamera • Power Adapter Input: 110~240V AC - 1.5AMP 50/60Hz Output: 12V DC - 5.0AMP • Power Cable for 110V • CAT5 Ethernet Cable • Quick Start Guide • Security Screw Wrench Required Equipment (not included with iCAM4100) • Server Computer (refer to the Hardware Manual for details) • Ethernet Switch • Ethernet Wiring • Uninterruptible Power Supply

  • LG iCAM4000, The iCAM4000 is a two-eye iris camera used to capture the iris images of the user. The iCAM includes an alignment indicator behind the mirror and voice prompts to assist the user. When used in a typical access control application, the iCAM will be placed near the secured portal and provides the means for the system to identify the user requesting entry. The iCAM can be used in enrollment mode using the IrisEnroll application (included with EAC software) or recognition mode when it is configure

  • LG iCAM4000, • The recommended mounting height for the iCAM4000 is 142cm (56 inches) from the floor to the bottom of the unit. This mounting height can be adjusted to accommodate the height of the average user at the installed location. • High amounts of ambient light must be avoided. Intense light sources such as sunlight or halogen lamps may reduce the image capture performance of the iCAM, this may result in an increased “failure to acquire” rate. • The iCAM is not weatherproof and must not be exposed to precipitation or extreme temperatures. An enclosure may be used to protect the unit if required. See www.lgiris.com – Support & Ser

  • 4 iCAM4000 Installation 206.4 181.6 .841 4 011 HOLE HOLE HOLE HOLE HOLE HOLE HOLE .62 7 551 210 Dimensions and Screw Holes on the Rear Enclosure 68.5 25 43.5 8 9 .841 4 42.9 Wall Rotation Part with Front Enclosure Rear Enclosure Dimensions of iCAM4000 (mm unit) 1. Remove the two security screws (use included security bit wrench) from the bottom of the iCAM 2. While gently pulling the

  • LG iCAM4000, 4. When recessed mounting, leave 6mm (1/4”) of extra space above the marked hole so when mounting the back plate it allows the iCAM to slide down onto the installation plate tabs. 5. Route the power line, network line, and other necessary cables through the back plate hole. 6. Use the appropriate fasteners for the material in which the iCAM will be mounted, secure the back plate. 7. Attach the wires from the 12VDC power supply to the screw terminal connections. The +12VDC (white wire) power connects to the + (positive) terminal, whereas the 12VDC ground (black wire) connects to th

  • LG iCAM4000, Changing the IP Address of the iCAM * Note: The IP Address of each iCAM must be changed individually. Do not connect more than one un-configured iCAM to the network at any one time to avoid IP Address conflicts. Any computer with a web browser which supports graphics (ex. Internet Explorer) can be used to configure the iCAM4000/4100. 1. Set the computer to the static IP of 192.168.5.1 - subnet 255.255.255.0 2. Open the web browser and enter http://192.168.5.100 in the address bar then press ENTER. The

  • 5. Select Network Settings. 6. Enter the new IP address for the iCAM (default = 192.168.5.100) 7. Enter the new Subnet Mask for the iCAM (default = 255.255.255.0) 8. Enter the new Broadcast Address for the iCAM (default = 192.168.5.255) 9. Enter the new Default Gateway for the iCAM. (default = 192.168.5.254) 10. Click OK to save changes and to open network

  • LG iCAM4000, Once all iCAMs have been configured Once all iCAMs have been configured, the computer IP Address can then be changed back to its original IP Address or to the new IP Address as required to communicate to the rest of the IrisAccess™ system. SmartCard Integration • The iCAM4010-E1 and iCAM4010R-E1 have a built-in Integrated Engineering Smart ID smart card reader, and the iCAM4010-H1 and iCAM4010R-H1 have a built-in HID iClass smart card reader. • The only configuration to the iCAM for smart card support is

  • LG iCAM4000, Technical Support Additional information and Technical assistance is available on the LG Electronics – Iris Technology Division’s support web site at www.lgiris.com, click on Support & Service then Technical Support. Technical Support 9

More Instructions:

DOWNLOAD

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Blue Aura WS30i Operation & user’s manual blue-aura/ws30i-RZ2.pdf 11 Jan 2024 9
2 Zelmer ZVC225SP Operation & user’s manual zelmer/zvc225sp-JFA.pdf 20 Nov 2023 40
3 Motorola A1000 Owner's manual motorola/a1000-4J5.pdf 21 Apr 2023 122
4 Miranda Densite series DDA-1113 Manual to installation and operation miranda/densite-series-dda-1113-IB3.pdf 09 Aug 2023 15
5 Planet BT-200U Operation & user’s manual planet-technology/bt-200u-686.pdf 23 Mar 2024 29
6 ProScan PS27410YX1AX Operation & user’s manual proscan/ps27410yx1ax-6SK.pdf 01 Oct 2023 64

Similar Resources:

  • Interlogix

    Simon XT

    (2 pages)
    P/N 466-2328 • REV C • October 2012 1 Simon XT Talking Touchpad Installation Instructions Introduction This is the Simon XT Talking Touchpad Installation Instructions for model 60-924-3-XT (Figure 1 below ). The w all-mounted, two-way, talking touchpad combines a conventional learn mode touchpad w ith an RF receiver, speech chip, and voice amplificati …
  • Paradox

    K32LCD

    (2 pages)
    Printed in Canada | 02/2019PARADOX.COMTechnical SpecificationsWarrantyWarranty: For complete warranty information on this product, please refer to the Limited Warranty Statement found on paradox.com. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions.© 2019 Paradox Ltd. All rights reserved. Specifications may chan …
  • Firstech

    CM7000

    (67 pages)
    MASTER GUIDE CM7 v3.5 Firstech, LLC. 21903 68th Ave S. Kent, WA 98032 Phone. 888-820-3690 Fax. 206-957-3330 Please visit www.firstechdata.com for additional installation resources …
  • Digital Watchdog

    DWC-LPR650U

    (2 pages)
    Quick Start GuideTel: +1 (866) 446-3595 / (813) 888-9555Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Fridaydigital-watchdog.comAttention: This document is intended to serve as a quick reference for initial set up. It is recommended that the user read the entire instruction manual for complete and proper installation and usage.NOTE: Downloa …
  • Optex

    HX-80NRAM

    (28 pages)
    N219CONTENTS1 INSTALLATION PRECAUTIONS ............21-1 BEFORE INSTALLATION ................21-2 PARTS IDENTIFICATION ................31-3 KNOCKOUTS ..................................32 DETECTION AREA.................................42-1 OUTLINE OF DETECTION AREA ...42-2 HOW TO REDUCE THE LONG RANGE DETECTION AREA ............62-3 HOW TO DEACTIVATE THE SH …
  • Sony

    SRG-300SE

    (67 pages)
    HD Color Video CameraUser’s GuideSoftware Version 1.0Before operating the unit, please read this manual thoroughly and retain it for future reference.SRG-300SE/301SEC-055-100-11 (1)© 2014 Sony Corporation …

Comments, Questions and Opinions: