Manualios.com

LG LIP-8050V Operation & User’s Manual

LG LIP-8050V Manual Online:

4.15, 610 votes
LG LIP-8050V User Manual
LG LIP-8050V User Guide
LG LIP-8050V Online Manual

Text of LG LIP-8050V User Guide:

  • LG LIP-8050V, You can initialize the Call History, PhoneBook, Multimedia data, Alarm clock and schedule and configuration Settings. Reboot You can restart phone from the Reboot menu. 3. LCD, SPEAKERPHONE & RELATED FEATURES 3.1 Using the Speakerphone Activate the iPECS Speakerphone at any time (except for Paging) in place of lifting the handset to receive or place calls. Additionally, you may switch between the handset and Speakerphone during a call. By keeping the handset Off-hook, the Group Listen featur

  • LIP-8050V User Guide Issue 1.0 Important Safety Information To prevent unexpected danger or damage please read this information before installing or attempting to repair you phone. Warning and Caution information is provided to alert the consumer of known dangers: Warning: To reduce the possibility of electric shock, do not expose your phone to high humidity areas, s

  • LG LIP-8050V, tone on top of the existing call, as an indication of another call waiting. While busy, certain stations can activate Voice-Over to your phone. In this case, audio is received from both the active call and the Voice-Over announcement at the same time. Respond to any of these Off-hook Signals in one of several ways; place the existing call on Hold and respond to the new incoming call, activate One-time DND, send a Silent Text Message, or ignore the new call. Silent Text Message requires a TEXT MESSAGE button (not available on a SLT or other non-display terminal). The Attendant or Secretary m

  • LG LIP-8050V, 9. MISC. FEATURES 9.1 Call Log Users can view a log of incoming, outgoing and missed calls on the display (up to 100 records). A CALL HISTORY button provides simple access to all calls (incoming (called), outgoing (dialed) and missed (lost) calls) at any time. The right navigation button will access the Call Logs while idle. Press the CALL HISTORY button or the right navigation button. Select the call type (Incoming, Outgoing, or Missed) with the Navigation button. Scroll through the Call Log

  • LG LIP-8050V, 5.3.2 Using and Entering Saved Number Dial You may store the last number dialed on an external call to the Saved Number Dial buffer for convenient dialing at a later time. The Saved number is stored until a new number is saved. 5.3.3 Using System Speed Dial Numbers The iPECS-100 system has memory allocated for 800 System Speed Dial numbers (bins 200-999). The iPECS-300 system has memory allocated for 3000 System Speed Dial numbers (bins 2000-4999). The iPECS-600 system has memory allocated for 6000 System Speed Dial numbers (bins 2000-7999). The iPECS-1200 system has memory allocated for 12000 Sys

  • LG LIP-8050V, Press the CALL button, to call the Main number (in yellow) or MENU to select a different number available for the contact (Mobile/Home/Office/Station). To add or edit a contact record in the Phonebook, select Add from the Phonebook menu or Edit from the Search menu.

  • LG LIP-8050V, Record video You can adjust resolution using the navigation button before you Record a video. Supported resolutions are: 176 x 144 352 x 288 Image gallery You can manage photo files. There are three categories Basic Images (photos stored in the phone at the factory), Taken Images (photos captured by you) and Received Images. Select a category to display the list of images and a thumb nail of the highlighted image. The highlighted can be stored as the background screen for the phone.

  • LG LIP-8050V, LIP-8050V User Guide Issue 1.0 ii 5.1.1 Using Camp-On when calling a busy station ............................................ 46 5.1.2 Leaving a Message Wait .......................................................................... 47 5.2 External Calls .......................................................................................................47 5.2.1 Placing external CO/VoIP calls................................................................. 47 5.2.2 Waiting for the next available CO/IP line .................................................. 48 5.2.3 Account Codes: Tracking External calls for billing ...............

  • LG LIP-8050V, 801-820 for iPECS-50 & 100, 801-872 for iPECS-300 & 600, or 8001-8200 for iPECS-1200. Any CO/IP Line access— 9 When dialing on a CO line which uses pulse style signals, you may activate Dial Pulse to Tone Switchover changing to DTMF style dialing (for banking services, etc.). When placing an IP call, you must dial an IP address using the ‗*‘ key in place of the dot. If Least Cost Routing is set-up, the number you dial will be analyzed and the system will place the call on the least expensive route

  • VMIM/VSF module, the iPECS Feature Server or an external Voice Mail system. These Voice Mail systems allow access to and management of received voice messages. While in your Mail Box, you have control of your password and Mail Box greeting. In addition, you can remotely control Call Forward for your station to Voice Mail. You will n

  • LG LIP-8050V, 4.8.2 Forwarding callers to a Text Message Using an iPECS Phone, the system can be setup to return a ‗Text Message‘ to internal callers. When calling your Station, internal callers will automatically receive the selected message or you can send a text message you select in response to an internal call, Silent Text Message. There are 11 Custom Display Messages each up to 24 characters. Ten can be assigned by the Attendant and one assigned by you, see Station Speed Dial Character entry chart. In addition, there are ten fixed Pre-De

  • LG LIP-8050V, You can review the network mode (static or DHCP), IP address, Subnet mask, Default gateway, DNS address, MAC address. LAN Configuration You can set the network mode (static or DHCP), IP address, Subnet mask, Default gateway and primary and secondary DNS address. VLAN Configuration You can set the VLAN ID and priority for both LAN port and PC port of the phone. DIFFSERV Configuration You can set the DiffServ value for voice, signals and video.

  • LG LIP-8050V, Alarm Monitor—should the external contact activate, a unique Alarm Ring signal and LCD display may be received. To restart the monitor circuit, the external contacts must be deactivated and the Alarm Ring signal terminated. Door Bell—a unique Door Bell Ring (single tone burst) may be received each time the external contact is activated. A system contact also can be assigned to act as a Door Open contact. NOTE—Contacts 3 & 4 are only available in the iPECS-300, 600 and 1200. 9.6 Power Fai

  • LG LIP-8050V, 5. Placing Calls To activate Custom or Pre-Defined Message Forward:  Press TRANS/PGM ,  Dial User Program feature code 51,  Dial the two-digit text Message code (00-20),  Dial any auxiliary input for messages 01-04 and 06-08,  Press HOLD/SAVE , forward confirmed. To cancel activated Message:  Press the Fwd Soft button,  Dial #. To program the Station Custom Message (00) at your station:  Press TRANS/PGM ,  Dial User Program feature code 52, 

  • LG LIP-8050V, iPECS LIP-8050V Diagram 1.5 LIP-8050V Phone Installation The phone handset is attached as shown (A). The LIP-8050V has two RJ-45 and 10/100 Base-T LAN connection ports. One port is for connecting to the LAN (D), and the other can be connected to a desktop data device or PC (B). 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Handset Navigation Button Speaker Phone book

  • LG LIP-8050V, 6. PLACING A CALL 6.1 Call Transfer: Sending a call to a different destination You can send an active call to another station or other resource of the system, Call Transfer. You can screen the transfer with the receiving party (Screened Call Transfer) or complete the transfer without screening (Unscreened Call Transfer). Transferred calls, internal or external, are place in Transfer Hold. These calls will receive Music on Hold (MOH) and will recall if not answered in a

  • LG LIP-8050V, station in the system. Typically, this feature is used with Paging to notify the desired user of a parked call. Parked calls are subject to Hold Recall after the Call Park timer. 6.6 Two-Way Record: Recording a call You may record an active external conversation in your Voice Mail Box. To place a Conference on Hold:  Press the HOLD/SAVE button. To retrieve the Conference from Hold:  Select the Conf button. To establish an Unsupervised Conference:  Establish conference with external parties,  Select the Conf button,  Hang-up the handset. To retrieve an Unsupervised Conference:  Lift the h

Related Products and Documents (IP Phone):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Craftsman WEEDWACKER Incredi-Pull 316.795861 Operator's manual craftsman/weedwacker-incredi-pull-316-795861-Q5Z.pdf 11 Aug 2023 32 10.02 Mb
2 Yamaha M2000 Operating manual yamaha/m2000-ZZZ.pdf 22 Mar 2023 38 3.61 Mb
3 Aiwa CD-DW420 U Operating instructions manual aiwa/cd-dw420-u-P65.pdf 03 Dec 2023 28 2.54 Mb
4 Valex BX1800 Operating instructions manual valex/bx1800-15E.pdf 28 Nov 2022 72
5 Rosewill RCBR-13010 Operation & user’s manual rosewill/rcbr-13010-L61.pdf 29 Nov 2022 1 0.41 Mb
6 Broan 673 Instructions broan/673-93L.pdf 17 Jan 2024 4 0.1 Mb

Similar Resources:

  • Cisco

    7962

    (2 pages)
    For Technical Support, Dial Helpdesk At 4100 Telephone and Voicemail Quick User Guide for Cisco 7962 Phones Changing phone ring type To change the phone’s ring type, press the Settings button on the phone and then go to User Prefer-ences > Ring Type. Select the default ring type and then choose from the list of ring tones. Press the Play soft key t …
  • Hama

    VoIP USB Telephone

    (10 pages)
    2 32. Choose the “Option” and click the “Advanced Controls”. 3. Disable the “AGC” function. (no mark) MusterVoIP USB Telephone00039750 Hama GmbH & Co KGPostfach 80 86651 Monheim/GermanyTel. +49 (0)9091/502-0 Fax +49 (0)9091/[email protected]
  • AudioCodes

    420HD

    (34 pages)
    AudioCodes 400HD Series of High Definition IP Phones HD VoIP 400HD Series IP Phones for Microsoft® Skype™ for Business Release Notes AudioCodes 400HD Series IP Phones for Microsoft Skype for Business Version 2.0.13B Document #: LTRT-08271 …
  • Polycom

    VVX 411

    (4 pages)
    Flip Soluons Ltd t/a Flip Connect The Malngs, Bridge Street, Hitchin, Herts, SG5 2DE 01462 417 147 0870 421 5411 support@flipconnect.co.uk www.flipconnect.co.uk Polycom VVX411 ECTBetter . ConnectedTMFlip ConnectQuick User Guide …
  • SMC Networks

    DSP-200

    (2 pages)
    VoIPSMCDSP-200 TigerVoIP™ Desktop SIP Phonewww.smc.comThe SMC TigerVoIP™ Desktop Phone (SMCDSP-200) is compli-ant with the SIPv2 Voice over Internet Protocol (VoIP) and canbe used with a SIP based Internet Telephony Service Provider(ITSP), IP PBX and other SIP based client devices to make andreceive VoIP calls anywhere you have internet access. Whenused …
  • Yealink

    SIP-T32G

    (2 pages)
    Star2Star Yealink SIP-T32G Quick User Guide Copyright © 2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications. Page 1 of 2 For detailed information please consult the Star2Star Phone and Features Guide, available for view/download via the Star2Star K …

Comments, Questions and Opinions: