Manualios.com

Logik L1HDVD11 Instruction Manual

Logik L1HDVD11 Manual Online:

3.35, 2564 votes
Logik L1HDVD11 User Manual
Logik L1HDVD11 User Guide
Logik L1HDVD11 Online Manual

Text of Logik L1HDVD11 User Guide:

  • Logik L1HDVD11, 22 Video Setup Page Video Output RGB and CVBS video signal can be set in setup page or by pressing the V-MODE button on the remote control. Resolution You can select the resolution output in the setup page or by pressing the RESOLUTN button on the remote control of the DVD player from HDMI to match your TV. Colour Setting • Sharpness Set the sharpness level of the video output. • Brightness Set the brightness level of the video output. • Contrast Set the contrast level of the video output. • Gamma Set the gamma level of the vi

  • Logik L1HDVD11, Rovi Proprietary Rights This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Restriction on Use & Rovi Trade Mark Rights Use of the copyright protection technology contained in this product must be authorised by Rovi Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Rovi Corporation. The names “Rovi Corporation” and “Macrovision” are protected by trademarks. Notes for battery disposal The batteries used with this p

  • Logik L1HDVD11, 9 2. Insert two AAA size batteries. Make sure to match the (+) and (–) ends of the battery compartment. Battery Installation for the Remote Control 1. Press and lift the back cover up to open the battery compartment of the remote control. 3. Close the battery compartment cover. Handling the Batteries • Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re, personal injury or damage to property. • Only use the battery type indicated in this manual. •

  • Logik L1HDVD11, 7 Remote Control 1. STANDBY To turn the power on or restore the DVD player to standby mode. 2. SETUP To display the Setup Menu of the DVD player. 3. 0–10+ To select the numeric items in a menu. 4. F.REV To fast reverse during playback. F.FWD To fast forward during playback. 5. PLAY To play the DVD disc. 6. STOP To stop the playback. 7. TITLE To go back to the previous menu or show the title menu. (If it is available in the DVD features) 8. CURSOR To move up, down, left and right in the Setup Menu. 9. AUDIO T

  • Logik L1HDVD11, 28 Safety Warnings • Read all the instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party make sure to include this manual. • Check that the voltage marked on the rating label matches your mains voltage. Damage • Please inspect the unit for damage after unpacking. • Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch o, withdraw the mains plug and consult your dealer. Location of Unit • The

  • Logik L1HDVD11, 11 Stereo System To COAXIAL type digital audio input Method 1 COAXIAL Cable Connecting to the Mains Socket 1. After all connections are properly complete, connect the mains cable into the mains socket. Never make or change any connections when the DVD player is connected to the mains socket. 2. Press the STANDBY button on the DVD player or remote control to turn the DVD player on. 3. When the DVD player is power on and there is no disc in it, the TV screen will show “NO DISC” to indicate there is no disc in the DVD Player. (All cables not supplied.) 1. Connecting to an Amplier Equipped with a Digital Audio Input and TV Use a COAXIAL

  • 10 Connections Audio / Video Connections 1. Connecting to a TV with an HDMI Cable Use an HDMI cable (not supplied) to connect between the DVD player’s HDMI OUT and the TV’s HDMI IN. 2. Connecting to a TV with a Composite Cable Use audio/video cables (not supplied) to connect between the DVD player’s AUDIO/VIDEO OUT and the TV’s AUDIO/VIDEO IN. (

  • Logik L1HDVD11, 19 System Setup When you press the SETUP button on the remote control, the setup menu will be displayed. 1. Within the setup menu, you can use the buttons on the remote control to move the cursor, and then press the ENTER button to make your selection. Press the button to return to the previous menu. 2. To exit the setup menu, press the SETUP button again. General Setup Page Setup TV screen format, video type and all DVD functions. TV Display In order to display the playback in the correct size format, both the DVD player and

  • Logik L1HDVD11, 29 CLASS 1 LASER PRODUCT Batteries • Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous. • Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed. • Please dispose of batteries correctly by following the guidance in this manual. Supervision • Children should be supervised to ensure that they do not play with the unit and the remote control. • Never let anyone especially

  • Logik L1HDVD11, 24 Parental This feature allows you to block disc playback with specic ratings. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children, or you can have certain discs played with alternative scenes. • Unlock the disc by entering the 6-digit password you have set in PASSWORD setup before you can access the RATING menu. Password The Parental Control can be set up in the DVD player to block video and to change the password. A 6-digit password will be r

  • Logik L1HDVD11, 15 Advanced Playback The following functions are applicable only to DVD discs. If other disc formats are played, the screen display and operation will be dierent. OSD Press the OSD button and the screen will display some information about the disc, such as: “Title Elapsed”, ”Title Remain”, ”Chapter Elapsed”, ”Chapter Remain” and ”Display O”. Title With some DVD discs, press the TITLE button to display the title menu. You can press digits to select the preferred chapters. Press the PLAY button to play. (Depending on the DVDs) Subtitle Language 1. Press the SUBTITLE button repeatedly to switch between dierent subtitle

  • Logik L1HDVD11, 27 PROBLEM SOLUTION The DVD player does not start the playback. • Insert a readable disc with the playback side facing down. • Check the disc type, colour system (PAL/NTSC) and region code. • Check for any scratches or smudges on the disc. • Press SETUP button to turn o the setup menu . • Enter the password in order to change the parental rating level or to unlock the disc for playback. • Moisture may have condensed inside the system. Remove the disc and leave the system turned on for about an hour. • Disconnect the mains cable from the mains s

  • 13 Start Up Press the STANDBY button on the DVD player or remote control. Turn on the TV and select the video input connected to the DVD player. Basic Playback 1. Press the OPEN/CLOSE button to open the disc tray, place a disc into the disc tray with the label facing up. • For a double-sided disc, load the side which you want to play facing down. • There are two d

  • Logik L1HDVD11, 21 Dolby Digital Setup Page Dual Mono If your amplier / decoder has Dolby Digital output, you may select stereo, left mono, right mono, or mixed mono mode for your amplier decoder. Dynamic This function is generally used when playing high volume programs at night to minimise disturbances. This setting can dynamically lower the volume and still keep the original tone quality. This is the range, measured in decibels (dB), between the loudest and the quietest sound registers in a soundtrack. Audio Setup Page Analog Audio Setup Page Downmix Setup Set front speakers to Lt/Rt or Stereo. • Lt / Rt Select

  • Logik L1HDVD11, 5 Unpacking Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations. DVD Player Thank you for purchasing your new Logik DVD Player with HDMI. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it oers. You will also nd some hints and tips to help you resolve any issues. Read all the safety instructions c

  • Logik L1HDVD11, 14 Fast Forward and Fast Reverse 1. Press the F.FWD button to fast forward through the disc. Each time the F.FWD button is pressed, the fast forward motion speed changes. 2. Press the PLAY button to resume normal playback. 3. Press the F.REV button to fast reverse through the disc. Each time the F.REV button is pressed, the fast reverse motion speed changes. 4. Press the PLAY button to resume normal playback. Pause Playback 1. Press the PAUSE button to pause playback (still mode). The sound will be muted during still mode. 2. Press the PLAY button to resume normal playback. Single Step Playback 1. Press the STEP button repeatedly to play in step. 2. Press the PL

  • 26 Hints and Tips PROBLEM SOLUTION No operation can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 6m. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote c

  • Logik L1HDVD11, 23 Preference Setup Page The preference setting is only active when there is no DVD disc in the DVD player or the DVD player is in STOP mode. The setting will be saved and eective whenever the DVD player is turned on. TV Type In order for the disc to play, the colour system of the DVD player, disc and TV should match. You can set the TV type in the PREFERENCE MENU or pressing the NTSC/PAL button on the remote control. • PAL This is the format used in UK. • NTSC This format is used by some other countries, e.g. USA. Audio Allows you to choose the pref

  • Logik L1HDVD11, 18 Thumbnail Preview • The STOP button is used to display thumbnail size pictures. After it is enabled, some scaled-down thumbnail pictures will be displayed on the screen. The PREV / NEXT buttons can be used to display the next / previous pictures in the JPEG disc. • You can select any of the displayed thumbnails by using the buttons and pressing the ENTER button. • The thumbnail will enlarge to t the TV screen and the slideshow will start. If you desire to display an image indenitely, press the PAUSE button. Quality of the pictures displayed on the screen is highly dependent on the viewing device. L1HD

Related Products and Documents (DVD Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Fisher-Price P9513 Instructions fisher-price/p9513-T7F.pdf 24 Jun 2022 4 0.25 Mb
2 Swann ADW-300/X Installation manual swann/adw-300-x-LL2.pdf 24 Jul 2022 4
3 EVERSPRING ST812 Operating manual everspring/st812-C3S.pdf 02 Jul 2023 5
4 Yamaha XJ700N Service manual yamaha/xj700n-8L6.pdf 22 Oct 2022 223
5 Litter-Robot II Standard Unit Manual manual litter-robot/ii-standard-unit-9W5.pdf 01 Mar 2024 22
6 McCulloch SUPERLITE 4528 Operator's manual mcculloch/superlite-4528-OA5.pdf 15 Sep 2022 22

Similar Resources:

  • Sharp

    DV-SV80S(S)

    (40 pages)
    Please read this Operation Manual carefullybefore using your DVD Video Player. DVD Video PlayerMODELDV-SV80S(S)OPERATION MANUALThe region number for this DVD player is 2.SKIPDV-SV80DVD / CD / VIDEO CD PLAYEROPEN/CLOSE PLAY/PAUSE STOPOPERATE2NTSC/PAL …
  • Harman Kardon

    DVD 31

    (1 pages)
    DVD 31 FRONT-PANEL INFORMATION DISPLAYA Playback Mode IndicatorsB Disc Type IndicatorsC Program IndicatorD Random IndicatorE VCD Playback Control IndicatorF Repeat IndicatorsG V-OFF IndicatorH A-B Repeat IndicatorI Angle IndicatorJ Progressive Scan IndicatorK Test Signal IndicatorL Parental Lock IndicatorM Time IndicatorsN Chapter/Track IndicatorsO Group/Tit …
  • Toshiba

    SD-K760

    (44 pages)
    ,QWURGXFWLRQ&RQQHFWLRQV%DVLFSOD\EDFN$GYDQFHGSOD\EDFN)XQFWLRQVHWXS2WKHUV7RVKLED&RUSRUDWLRQ',*,7$/9,'(2S68SPG $06'.686'.6&Downloaded from www.Manualslib.com ma …
  • Samsung

    AK68-01808C

    (36 pages)
    imagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.com/global/registerDVD Playeruser manualDVD-P390KAK68-01808C …
  • Elite

    DV-48AV

    (2 pages)
    Creating the right atmosphere for any story requires an immense attention to detail. That's why our DVD players are designed to upscale standard format signals up to 1080p for high-definition screens. That way you're assured an experience miraculously close to HD no matter what you watch. And considering you can also play h …
  • Toshiba

    HD-A30 - HD DVD Player

    (2 pages)
    THE HD-A30 TAKES THE PERFORMANCE AND CONVENIENCE OF HD DVD TO THE NEXT LEVEL. For the highest level of picture quality with today’s best performing high defi nition TVs, the HD-A30 adds 1080p output. That’s twice the resolution of a 720p signal. The HD-A30 is equipped with CE-Link HDMI™-CEC connectivity. This convenient feature offers the capability t …

Comments, Questions and Opinions: