Manualios.com

Lucent Technologies 8400 Series Installation And User Manual

  • 8400 Series Voice Recorder
  • ma5e2f9WDTzsE
  • Installation And User Manual
  • PDF / Adobe Acrobat Reader
  • 33

Lucent Technologies 8400 Series Manual Online:

4.9, 1561 votes
Lucent Technologies 8400 Series User Manual
Lucent Technologies 8400 Series User Guide
Lucent Technologies 8400 Series Online Manual

Text of Lucent Technologies 8400 Series User Guide:

  • 20 Attaching Adjunct Equipment If you are installing a speakerphone (Lucent Technologies models S101A, S201A, or QUORUM ® CS201A), a headset adapter (Lucent Technologies model 500A1), or other adjunct that may be offered, follow these steps to connect the adjunct equipment to your voice terminal. The adjunct requires auxiliary power from either a local, individual power supply or a clos

  • 11 ■ Figure 2 shows the back of the 8411 voice terminal, and Figure 3 shows the two jacks on the rear of the 8411. Use the RS-232-D jack for connecting a PC dedicated to PassageWay ® Solution software and the Analog Adjunct jack for connecting an analog device such as a modem, answering machines, fax machines, audio teleconferencing equipment, or TTY machines comm

  • Lucent Technologies 8400 Series, 31 OTHER 8400-SERIES VOICE TERMINALS DOCUMENTATION The following documentation provides instructions for using both the fixed and the switch features. These documents can be ordered from the Lucent Technologies BCS Publications Center. Write: Lucent Technologies BCS Publications Center P.O. Box 4100 Crawfordsville, IN 47933 Call: 1 800 457-1235 Outside US: 1 317 361-5353 When ordering any of these documents, be sure to specify the title and the “555” ordering number. — 8400-Series Voice Terminals Instructions for Installation, Switch Administ

  • 19 WARNING: Do not insert the handset cord into the Adjunct jack. It may cause equipment damage. 9. Snap the free end of the 1-foot line cord into the wall jack. 10. Place the base of the voice terminal on the wall-jack mounting studs, and pull downward until it is secure, as shown in Figure 8. FIGURE 8: Placing the Voice Terminal onto the Wall Jack Mounting Studs 11. Snap the free end o

  • Lucent Technologies 8400 Series, 27 SWITCH ADMINISTRATION After you have successfully installed the voice terminal, the system manager can use the instructions in the 8400-Series Voice Terminals Instructions for Installation, Switch Administration, and Programming the Options , 555-015-725, in order to administer selected features and assigned line appearances on each terminal. This manual also provides procedures for programming options such as enabling/disabling the speakerphone or speaker, enabling/disabling the Mute function, selecting ringing preference, and selecting handset and speaker volume control. Note on

  • Lucent Technologies 8400 Series, 26 For the 8434DX Voice Terminal There are two Call Appearance/Feature Button Designation Cards for the 8434DX voice terminal: ■ The smaller card contains two columns with five buttons in each column: the first column is labeled a through e; the second column is labeled f through j. ■ The larger card also contains two columns with 12 buttons in each column. The button labels on this larger card are blank; that is, they are NOT prelabeled with letters like the smaller card. The four columns on the 8434DX voice terminal, totaling 34 button spaces, can be used for specifying the telephon

  • Lucent Technologies 8400 Series, 22 USING THE RS-232-D JACK AND ANALOG ADJUNCT JACK ON THE 8411 See Figure 3 in the front of this manual for a drawing of the rear of the 8411 voice terminal. You can use the RS-232-D jack for connecting the 8411 to a PC for use with PassageWay Solution software. The Analog Adjunct jack can be used for connecting an answering machine, fax machine, modems, audio teleconferencing equipment or TTY machines commonly used by the hearing impaired. Important Notes for the 8411 ■ Your 8411 must have auxiliary power, either locally using an MSP-1 or an 1151A1 or A2, or remotely using an 1145B1 closet supply. ■ Before you set up y

  • Lucent Technologies 8400 Series, 24 PassageWay Status Indications On 8411 voice terminals, the GREEN and RED lights next to Button #9 provide the following status indications for the PassageWay connection: Analog Adjunct Status Indications On 8411 voice terminals, the GREEN and RED lights next to Button #10 provide the following status indications for the Analog Adjunct connection. NOTE: For the DEFINITY G3V4, Issue 3, or later switches, where the Data Options field is set for analog and the Analog Adjunct has been assigned its own telephone line, the RED light is always on. PassageWay Status Green Light Red Light AT Command Mo

  • Lucent Technologies 8400 Series, 13 FIGURE 2: Line, Adjunct, and Handset Cord Routing for Desktop Installation on the 8411 Voice Terminal FIGURE 3: Connecting a PC for Use with PassageWay and Connecting an Analog Adjunct (These Jacks Are on the Rear of the 8411) Kickstand Routing channel for line cord and adjunct cord Line jack Adjunct jack Handset jack Analog Adjunct jack RS-232-D jack

  • Lucent Technologies 8400 Series, i Contents INSTALLING YOUR VOICE TERMINAL. . . . . . . . . . . . . . . . . . . . . . . . 1 Distance Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Auxiliary Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General Notes for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Desktop Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Adjusting the 8405 and 8410 Voice Terminal Desktop Stand . . . . . . . . . 7 Wall In

  • Lucent Technologies 8400 Series, 23 To connect an Analog Adjunct to the 8411 1. Connect the line cord of the Analog Adjunct to the Analog Adjunct jack on the rear of the 8411 voice terminal. WARNING: Do NOT connect the Analog Adjunct to the wall jack. It will cause equipment damage. NOTE: When an 8411 voice terminal is administered at a DEFINITY G3V4, Issue 3, switch, the voice terminal must be administered to use the appropriate analog telephone line. For more information on administration of the 8411, see “Switch Administration” later in this manual. PassageWay and Analog Adjunc

  • Lucent Technologies 8400 Series, 12 8434DX. See Figure 4. For more detailed instructions on installing the expansion module to the 8434DX, use the instructions titled “801A Expansion Module Instruction Manual,” shipped with the expansion module. IMPORTANT: An 801A Expansion Module can be used ONLY with an 8434DX voice terminal connected to a DEFINITY G3V3.3 or later switch. 6. Snap one end of the coiled cord into the Handset jack. This jack is labeled . (On some 8403 voice terminals, you must thread the cord into the channel leading to the side edge of the voice terminal; the handset cord will then lead off the side of t

  • Lucent Technologies 8400 Series, The 8400-Series Voice Terminals Installation and User’s Manual (includes instructions for the 8403, 8405, 8410, 8411, and 8434DX voice terminals) 555-230-875 Comcode 107981094 Issue 4 March 1997 Caution: Please DO NOT DISCARD this booklet. It contains important safety information necessary for anyone responsible for installing or using these terminals.

  • Lucent Technologies 8400 Series, 21 FIGURE 9: Connections for the 8434DX and All Telephones with Adjuncts Using an Individual Power Supply 84xx Terminal D8AC Line cord D8W MSP-1 or the 1151A1/A2 power supplies Wall jack = Jack = Cord connections Line Other Phone ADJLine Adjunct Ex Mod 8434DX D6AP Module Expansion 84xx D8AC D6AP ADJLine Adjunct D8W KS-22911 power supply Wall jack Terminal 400B2 (on the MSP-1 only)

  • Lucent Technologies 8400 Series, 17 Wall Installation NOTE: The 8403, 8405, and 8410 voice terminals can be wall-mounted. The 8411 and the 8434DX voice terminals CANNOT be wall-mounted. For wall-mounting, you need a 1-foot D8W line cord (not supplied with the voice terminal; Comcode: 103786760). To wall-mount the 8403, 8405, and 8410 voice terminals 1. Make sure the 8-conductor wall mount plate is in place. 2. Press down on the handset retainer hook located under the handset and slide it toward the top of the voice terminal. See Figure 6. 3. Rotate the hook a

  • Lucent Technologies 8400 Series, 9 INSTALLING YOUR VOICE TERMINAL IMPORTANT: For a fuller description of installing the 8400-Series voice terminals and procedures on administering these sets and programming such options as enabling/disabling the speakerphone or one-way speaker, enabling/disabling the Mute function, selecting ringing preference, or selecting handset and speaker volume control, see the 8400-Series Voice Terminals Instructions for Installation, Switch Administration, and Programming the Options , 555-015-725. (This document can be ordered from the Lucent Technologies BCS Publications Center at 1 800 457-1235.) Distance Limitations In 4-wire operation, the voice terminal must be within 5,000

  • Lucent Technologies 8400 Series, ADDITIONAL INSTALLATION WARNING FAILURE TO FOLLOW THESE INSTRUCTIONS CAN CAUSE DAMAGE TO THE TERMINAL OR CAUSE THE ASSOCIATED PBX CIRCUIT PACK TO REMOVE POWER TO THE TERMINAL. IN EITHER CASE THE TERMINAL WILL NOT FUNCTION CORRECTLY. The design of this product allows it to operate on either 2-wire or 4-wire DCP circuits. In order for the terminal to function properly in either 2-wire or 4-wire installations, there must be NO INTERCONNECTIONS between the wire pairs used for 2-wire and 4-wire operation. Bridging or paralleling of these pairs can result in damage to the terminal or can cause the PBX circuit pack to

Related Products and Documents (Voice Recorder):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Philips CCB130CN Specifications philips/ccb130cn-B17.pdf 24 Jul 2022 2
2 KitchenAid KXW9748YSS0 Installation instructions and use & care manual kitchenaid/kxw9748yss0-1ZK.pdf 05 Oct 2023 40
3 Mercury 40 FourStroke Manual  mercury/40-fourstroke-J2Q.pdf 28 Sep 2022 33
4 Billy Goat AERATOR PL1800 Owner's manual billy-goat/aerator-pl1800-855.pdf 20 Feb 2023 13
5 NetComm NP5410 Specifications netcomm/np5410-U7L.pdf 19 Jan 2024 2
6 Ultra Start 1271M Owner's manual ultra-start/1271m-6YY.pdf 19 Nov 2022 20 5.17 Mb

Similar Resources:

  • ABB

    C1300

    (24 pages)
    — ABB MEASUREMENT & ANALYTICS | USER GUIDEC1300Advanced circular chart recorderUser Guide supplementModbus communications optionMeasurement made easyFor more informationFurther publications are available for free download from:www.abb.com/measurementor by scanning this code: Search for or click onAdvanced circular chart recorderDatasheet …
  • Vidicode

    V-Tap Analog

    (3 pages)
    Quick Guide for the V-Tap Analog V1.0 ©2017 Vidicode 1 The V-Tap Analog is a device that can record the audio from an analog telephone line or any telephone that works with a handset. The captured data is stored onto an SD card and can …
  • Philips

    Voice Tracer LFH0652

    (3 pages)
    Philips Voice Tracerdigital recorder with ClearVoiceStereo playbackLFH0652Remember what we saidWith ClearVoice for crystal-clear playbackThe Voice Tracer digital recorder is ideal for capturing conversations - the audio quality is outstanding even in loud environments. On top of that, it also lets you charge your device everywhere you want via USB.Superior …
  • Sony

    PDWU2

    (50 pages)
    PROFESSIONAL DISC DRIVE UNITPDW-U2電気製品は、安全のための注意事項を守らないと、火災や人身事故になることがあります。このオペレーションマニュアルには、事故を防ぐための重要な注意事項と製品の取り扱いかたを示してあります。このオペレーションマニュアルをよ� …
  • LogTag Recorders

    TRIX-8

    (2 pages)
    is Quick-Start guide covers preparation, use and maintenance to assist you in getting the best results from your LogTag®.ProductsLogTag® Recorders offer a variety of different models. The product range is constantly being updated and new models added, so visit www.thermoworks.com/products/logger/logtag.html to get the latest information and news about u …
  • SMART

    SBX3100

    (49 pages)
    USER GUIDE Model: SBX3100www.kcicommunications.comVER 1.2.04thEdition Thank you for purchasing the Smart Black Box Drive Recorder. Please ensure that you read and understand this USER GUIDEbefore connecting and installing this Recorder. Please store the USER GUIDE in an easily accessible location. …

Comments, Questions and Opinions: