Manualios.com

Magnadyne MV-VCRUSER02 Owner's Manual

Magnadyne MV-VCRUSER02 Manual Online:

3.1, 2849 votes
Magnadyne MV-VCRUSER02 User Manual
Magnadyne MV-VCRUSER02 User Guide
Magnadyne MV-VCRUSER02 Online Manual

Text of Magnadyne MV-VCRUSER02 User Guide:

  • Digital Headphone Operation 1. Turn On the Headphones: To turn on the headphones, press the ”PWR” button on the right side ear pad. The digital display will show radio station digits when the headphone is on. 2. Tuning an FM Radio Station: A. Press the ”UP” or ”DOWN” button to manually tune in an FM radio station. B. Press and hold the ”UP” or ”DOWN” button for one

  • Magnadyne MV-VCRUSER02, Reset When used will reset all the screen settings back to manufacturer default settings. MENU SEL. ☛ Step 1 U SEL. ☛ ☛ Step 3 Press the Menu Button Once Screen Display Press Either the Up or Down Buttons to Reset Screen Display MENU SEL. ☛ Step 4 Press the Menu Button Twice to Exit. Screen Display MENU SEL. ☛ Step 2 Press the Select Button Until Reset is Selected Screen Display Picture Adjustment For use in the United States, the picture selection should be "STANDARD NTSC/PAL". All other settings are for use outside the U.S. and if selected could result in poor picture quality. MENU SEL. ☛ SIGN

  • Magnadyne MV-VCRUSER02, Recording 1. Turn “ON” the ignition switch and power will be applied to the Movievision TM system. 2. Release the viewing screen from it’s folded and locked position in the viewing pod. 3. Point the remote at the viewing screen and press “POWER” or press “POWER” on the front panel of the VCR . 4. Insert a VHS tape into the tape slot of the VCR. Push the tape case all the way in until the outer edge of the tape is flush with the front panel of the VCR. The tape mecha- nism will draw the tape in to the play position. The tape will automatically go

  • Magnadyne MV-VCRUSER02, 15 Headphone Operation Your Movievision TM entertainment system is supplied with two (2) Movievision TM headphones. The correct operation, care and maintenance of the headphones is critical to their ability to provide the user with a lifetime of operation. Misuse, abuse and neglect of the headphones will result in poor performance and premature failure. Please read through the simple operation and maintenance instructions enclosed. 1. Install the Batteries (AAA Type) To install the “AAA” batteries supplied, repe

  • Magnadyne MV-VCRUSER02, VCR Tape Playback 1. Turn “ON” the ignition switch and power will be applied to the Movievision TM system. 2. Release the viewing screen from it’s folded and locked position in the viewing pod. 3. Point the remote at the viewing screen and press “POWER” or press “POWER” on the front panel of the VCR. 4. Insert a VHS tape into the tape slot of the VCR. Push the tape case all the way in until the outer edge of the tape is flush with the front panel of the VCR. The tape mecha- nism will draw the tape in

  • Magnadyne MV-VCRUSER02, 6.4" Viewing Screen Controls and Functions 7. Transmitter Frequency Selection: The Movievision TM viewing screen transmits a signal that is received by the Movievision TM headphones and can also be received by the vehicle’s car radio. There are 3 fre- quencies available for use but only one can be used at a time. When you are listening to a movie using the wireless Movievision TM headphones, it is possible that you could travel through an area where interference between the screen transmitter and the headphone receiver is at an un- acceptable level. If this occurs, you can use the 3 position frequency switch located in the roof housing

  • 10.4" Viewing Screen Controls and Functions 1. Infrared Eye Point the remote control in the direction of the Infrared Eye when accessing the functions provided by the remote control. 2. Viewing Screen Release To release the screen, push inward on the Movievision TM logo and pull downward. Place the screen to the desired viewing position. To lock the viewing screen in the closed position,

  • Magnadyne MV-VCRUSER02, 16 4. Connecting a Second Set of Headphones Your Movievision TM headphones have a plug receptacle locat- ed at the bottom of the “R” ear pad. (4) A second set of per- sonal type headphones (Must have 3.5 mini male type plug) can be connected at this point. Note: When a second pair of headphones are attached, the tuning and audio level is controlled by the Movievision TM headphone. PWR OFF RAD MOV 1 PWR OFF RAD MOV 1 1. Headphone Radio Operation Your Movievision TM headphones can be used as an FM radio receiver. Repeat the following procedures to listen to FM radio broadcasts. A. Move the Power/Selector switch (1) from the OFF posi- tion to the RAD (Radio) position. B. Rot

  • Magnadyne MV-VCRUSER02, Owner’s Manual In Vehicle Entertainment System with Drop Down 6.4” and 10.4" TV Screen, Remote Control, Hi-Fi VCR and Mono VCR with Wireless Headphones Patent Pending For Operation Assistance or Technical Assistance after Reading the Troubleshooting Guide in this Manual, Please Call Toll Free (800) 638-3600 TM

  • Magnadyne MV-VCRUSER02, 14 Replacing Domelight Bulbs: To replace a domelight bulb, repeat the following procedure. Warning! in some cases, the domelight maybe hot, proceed with caution. 1. Use your fingernail to pull the lever at the end of the domelight lens forward and downward this will release the lens to expose the bulb. 2. Use a pencil to pry out one end of the bulb then pull the remaining end of the bulb out of it’s clip. Do not use any metal device to remove the bulb as you may short the ter- minals together. 3. To replace the bulb, place the metal ends of the new bulb

  • Magnadyne MV-VCRUSER02, 10.4" Viewing Screen Controls and Functions Backlight Adjustment: Adjusts the intensity of the rear panel lighting. For best results, this should be not be adjusted from the factory setting (50% setting). MENU SEL. ☛ 7. Transmitter Frequency Selection: The Movievision TM viewing screen transmits a signal that is received by the Movievision TM headphones and can also be received by the vehicle’s car radio. There are 3 fre- quencies available for use but only one can be used at a time. When you are listening to a movie using the wireless Movievision TM headphones, it is possible that you could travel through an area where interferen

  • Magnadyne MV-VCRUSER02, 6.4" Viewing Screen Controls and Functions 1. Infrared Eye Point the remote control in the direction of the Infrared Eye when accessing the functions provided by the remote control. 2. Viewing Screen Release To release the screen, push inward on the Movievision TM logo and pull downward. Place the screen to the desired viewing position. To lock the viewing screen in the closed position, press upward on the edge of the screen housing until the screen locks into place (you will hear a snap sound). 3. Adjusting the Screen’s Color Intensity: Rotate t he color control to the left or right to change the intensity of the colors on

  • Magnadyne MV-VCRUSER02, Remote Control Battery Install / Replace VCR Controls POWER EJECT STOP REC REW PLAY FF POWER REC SLP HEAT DEW R Cassette Compartment For cassette insertion/removal POWER Turns VCR on and off EJECT Ejects cassette REC Starts recording LED Indicators STOP Stops tape movement REW Rewinds tape (from stop mode) F.F. Fast forwards tape (from stop mode) PLAY Press to begin playback Hi-Fi Stereo VCR MOBILE VIDEO SYSTEM Hi-Fi HEAD 4 1. Slide battery compartment cover out from back of remote control. 2. Insert two AA batteries as diagrammed. (Supplie

  • Magnadyne MV-VCRUSER02, 18 Servicing: Should your Movievision TM VCR become inoperative, do not try to correct the problem by yourself. There are no user serviceable parts inside. Remove the unit from the vehicle and take it to an authorized Movievision TM service facility. Cabinet Cleaning: The front panel of the Movievision TM VCR can be cleaned with a soft cloth that has been immersed in luke warm water and wrung dry. Never use alcohol or solvents of any kind to clean your Movievision TM VCR. Damage will result. Scre

  • Magnadyne MV-VCRUSER02, MV-VCRUSER02 Rev. A 2-6-02 © Copyright 2002 Magnadyne Corporation Replacement Parts Order Form Send Orders To: Magnadyne Corporation We Accept Checks, Money Orders, Visa and Master Card ATTN: Consumer Parts Sales Make Checks Payable to: Magnadyne Corporation P.O. Box 5365 Carson, CA 90749-5365 SHIP TO: (No P.O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS (IF PAYING WITH A CREDIT CARD, YOUR BILLING ADDRESS IS REQUIRED) CITY STATE ZIP CODE DAY TIME PHONE NUMBER CREDIT CARD INFORMATION: CARD TYPE:  VISA  MASTER CARD CARD NUMBER EXPIRATION MONTH YEAR NAME AS

  • Magnadyne MV-VCRUSER02, Important Safeguards 1. Read Instructions: All the safety and operating instruc- tions should be read before operating any of the compo- nents in the Movievision TM system. 2. Retain Instructions: The owners manual should be retained for future reference of operation. Leave this man- ual in the vehicle. 3. Follow Instructions: Failure to follow the operating proce- dures enclosed may result in unsatisfactory performance of the system, premature component failure, injury to the user and void the warranty from misuse, abuse and lack

  • Magnadyne MV-VCRUSER02, ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product. This warranty and Magnadyne Corporation or its authorized agents obligations hereunder do not apply where the product was; damaged while in the possession of the consume

  • Magnadyne MV-VCRUSER02, Saturation Adjustment Adjusts the intensity of the colors on the screen from black and white conditions to full color condition.. MENU SEL. ☛ Step 1 U SEL. ☛ ☛ Step 3 SAT Press the Menu Button Once Screen Display Press the Up and Down Buttons to Adjust the Saturation Screen Display MENU SEL. ☛ Step 4 Press the Menu Button Twice to Exit. Screen Display MENU SEL. ☛ Step 2 Press the Select Button Until Saturation is Selected Screen Display Hue Adjustment Adjusts the overall color of the image on the screen by changing the intensity of the primary green and primary red colors (more green tinted picture or more red tinted picture). MENU SEL. ☛ Step 1

  • Brightness Adjustment: Adjusts the amount of white light in the image on the screen. MENU SEL. ☛ Step 1 U SEL. ☛ ☛ Step 3 BRT Press the Menu Button Once Screen Display Press the Up and Down Buttons to Adjust the Brightness Screen Display MENU SEL. ☛ Step 4 Press the Menu Button Twice to Exit. Screen Display MENU SEL. ☛ Step 2

Related Products and Documents (Car Stereo System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Patton electronics Model 3088/I Getting started manual patton-electronics/model-3088-i-244.pdf 08 Feb 2024 61 0.77 Mb
2 ProScan PSB322 Operation & user’s manual proscan/psb322-941.pdf 29 Sep 2023 11
3 Nakamichi CD-700II Owner's manual nakamichi/cd-700ii-CTZ.pdf 10 Aug 2022 21
4 The Land of Nod Princess Plume Twin/Full Headboard Assembly instructions the-land-of-nod/princess-plume-twinfull-headboard-NHE.pdf 07 Oct 2022 4
5 Metronic DualstreamBOX Hardware manual metronic/dualstreambox-EBW.pdf 12 Jul 2022 6
6 Nvidia Tegra NOTE 7 LTE Operation & user’s manual nvidia/tegra-note-7-lte-N6Y.pdf 04 Oct 2023 52

Similar Resources:

  • Discount Car Stereo

    A2D-VOL

    (6 pages)
    Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 A2D-VOL QUICK START INSTALLATION GUIDE FOR SELECT 1984-04 VOLVO Created March1, 2017 Revised: September 15, 2021 …
  • Sony

    MEX-BT5000

    (88 pages)
    SERVICE MANUALBLUETOOTH AUDIO SYSTEMSPECIFICATIONSMEX-BT5000Ver. 1.0 2006.06US and foreign patents licensed from DolbyLaboratories.Model Name Using Similar Mechanism MEX-1GPCD Mechanism Type MG-611WA-186//QOptical Pick-up Name KSS1000E– Continued on next page –9-887-268-012006F05-1© 2006.06Sony CorporationeVehicle DivisionPublished by Sony Techno Creat …
  • Philips

    CMD310

    (29 pages)
    31417853726055CMD310/TROUBLE SHOOTING.........................................................................28-2927....................................................USB.AUX PCB COMPONENT LAYOUT..............................................25-26POWER PCB COMPONENT LAYOUT...............................................23-24IPOD PCB COMPONENT LAYOUT......... …
  • Kenwood

    KAC-8102D

    (18 pages)
    © 2005-3 PRINTED IN JAPANB53-0252-00 (N) 1708POWER AMPLIFIERKAC-8102D/8152DKAC-9102D/9152DSERVICE MANUALKAC-9152DREMOTE CONTROLPoweAmplifieMAXIMUM POWERSubwoofer6575859510050172151191840FREQUENCY LEVEL [dB][Hz]Accessories(W01-1606-05)KAC-9152D(E type,M type)Dressing Panel(A21-4465-02) : KAC-8152D/9152D(A21-4466-02) : KAC-8102D/9102DScrew set(N99-175 …
  • Clarion

    DFZ675MC

    (42 pages)
    Owner's manualModed'emploiManual de instruccionesDFZ675MC2-DIN CD/SD/MP3IWMA RECIEVERICeNET CONTROUMUSIC CATCHER®nRECEPTEUR CD/SD/MP3fWMA 2 DIN!COMMANDE CeNET/MUSICRECEPTOR DE CD/SD/MP3IWMA 2-DINICONTROL CeNET/MUSICCATCHER@n …
  • Insignia

    NS-P5113

    (28 pages)
    Guide de l'utilisateurLecteur CD/MP3 et syntoniseur numérique FM portatifNS-P5113NS-P5113_08-1893_MAN_V1_French_Final.fm Page 1 Monday, March 30, 2009 1:20 PM …

Comments, Questions and Opinions: