Manualios.com

Meridian G series Installation Manual

Meridian G series Manual Online:

4.15, 1231 votes
Meridian G series User Manual
Meridian G series User Guide
Meridian G series Online Manual

Text of Meridian G series User Guide:

  • Meridian G series, Introduction 4 G07 G08 THD Less than 0.003%. Less than 0.0025%. Noise Better than -99dB A weighted. Better than -100dB A weighted. Mechanism Triple-beam laser. ATAPI ROM Drive. DSP Upsampling using 150MIPS Motorola DSP56367. Convertors 192kHz capable, 24-bit, dual differential, Delta-Sigma, superb Class A analogue design. Outputs Digital: S/PDIF, coax, and optical (TOSlink). 44.1kHz Analogue: 2.3V RMS, 44.1kHz. Digital: S/PDIF, coax, and optical (TOSlink). 88.2kHz or 44.1kHz. Analogue: 2.3V RMS, 176.4 kHz.

  • Meridian G series, Preface ii Important safety instructions • Read the instructions. •Keep these instructions. •Follow all instructions. • Do not use this apparatus near water. • Clean only with a dry cloth. • Install only in accordance with the manufacturer’s instructions. • Refer all servicing to approved service personnel. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE Safety warnings • Do not expose the product to dripping or splashing. • Do

  • Installing the CD player 11 To connect to other Meridian G Series, 500 Series, or 800 Series equipment COMMS COMMS LEAD COMMS LEAD G Series, 500 Series, or 800 Series unit COMMS G07/G08 In a system of Meridian products, one of the products acts as the controller for the system, receiving infra-red commands from the MSR+, and then, if appropriate, relaying them to the

  • Meridian G series, Introduction 2 G07 24-bit CD Player The G07 incorporates advanced design – both digital and analogue. Multi-layer PCBs, four separate power supplies, the latest surface-mount technology, carefully selected audiophile-quality components, and of course Meridian’s signature quality design and manufacturing. The latest laser assembly is used in the G07, and is optimised for CD, CD-R, and CD-RW playback. In addition, the player will replay most hybrid discs, as well as DTS CDs for external decoding via the digital outputs. The G07 maximises audio quality by reduc

  • Meridian G series, Installing the CD player 8 To connect to a digital surround controller (eg G68) DIGITAL OUT DIGITAL IN COMMS G07/G08 DIGITAL LEAD COMMS LEAD COMMS G68 Digital Surround Controller DIGITAL IN To connect the G08 to a preamplifier with balanced inputs (eg G02 Balanced Control Unit) G08 24-bit Upsampling CD Player BALANCED OUTPUTS XLR LEADS COMMS COMMS LEAD G02 Balanced Control Unit BALANCED INPUTS COMMS • Connect the DIGITAL output from the G07 or G08 to a suitable DIGITAL input on the digital surround controller, using a digital lead. • If the digital surround controller is

  • Meridian G series, Index 19 A accessories 5 audio connections 6 B balanced preamplifier, connecting to 8 C cleaning 17 COMMS, connecting 11 communications connections 10 connections audio 6 cleaning 17 communications 10 D digital surround controller, connecting to 8 DSP loudspeakers, connecting to 9 G G07 24-bit CD Player 1 audio connections 6 specifications 4 G08 24-bit Upsampling CD Player 1 audio connections 7 specifications 4 guarantee 18 M mains fuse, changing 17 models 1 MP3 discs, creating 16 P preamplifier, connecting to 8 product, resetting 13 R resetting the product 13 S safety warnings ii specifications 4 T tr

  • Troubleshooting 15 Troubleshooting We expect you to achieve superb results with the CD player. If, however, you encounter any problems, either when installing it, or during operation, please check the following pages for suggested solutions. If these suggestions fail to cure the problem, please contact your Meridian dealer for further assistance. General ope

  • Meridian G series, Installing the CD player 5 Installing the CD player Unpacking The G07 24-bit CD Player and G08 24-bit Upsampling CD Player are supplied with the following accessories: • MSR+ remote control with batteries, manual, and spare key caps. • Meridian Comms lead. •Power cord. •This manual. • Meridian G Series System Guide . If any of these items are missing please contact your dealer. Note: You should retain the packaging in case you need to transport the unit. This chapter explains how to install the CD player. It describes what you should find when you unpack the product, and how you should connect it to t

  • Meridian G series, Introduction 1 Product Analogue outputs Digital out Formats supported Upsampling G07 Unbalanced Optical, digital Audio CD No G08 Unbalanced and balanced Optical, digital Audio CD and Data MP3 Yes Both models of the G Series CD player provide digital, optical, and phono analogue outputs. Introduction This guide provides full information about unpacking the CD player and connecting it to the other equipment in the system. Once you have connected the product, refer to the G Series System Guide for information about operating it. CD player models This Installation Guide applies to the G07 24-bit CD Player and G08 24-bit Upsampling CD Player. The main differences between each of th

  • Troubleshooting 18 Service and guarantee Service The Meridian G Series of hi-fi components has been carefully designed to give years of untroubled service. There are no user- serviceable parts inside the case, nor do the units require any form of maintenance. In the unlikely event that your product fails to function correctly, it should be returned, in it

  • Meridian G series, Contents iii Introduction 1 Provides information about the CD player models, a description of each product, and technical specifi cations. CD player models 1 Specifications 4 Installing the CD player 5 Describes how to install the CD player and connect it to the other equipment in the system. Unpacking 5 Audio connections 6 Communications connections 10 Resetting the CD player 13 Explains how to reset the CD player using the front-panel controls. Resetting the product 13 Troubleshooting 15 Provides suggested solutions to problems while installing, confi guring, or operating the product. Maintenance 17 Service and guarantee 18 Index 19

  • Meridian G series, G07 24-bit CD Player ANALOGUE OUT DIGITAL OUT OPTICAL OUT MERIDIAN COMMS MAINTENANCE RS232 IR INIR IN WARNING SHOCK HAZARD - DO NOT OPEN NO USER SERVICEABLE PARTS INSIDE CLASS 1 LASER PRODUCT DOUBLE INSULATED PRODUCT SERIAL NUMBER TESTEDTESTED TESTED VOLTAGEVOLTAGE VOLTAGE CAUTION REPLACE WITH SAME TYPE FUSE T160mAL for 100 - 120V T80mA for 220 - 240V POWER INPUT ~50-60Hz 40VA MAX ON OFF L R G07 24-BIT CD PLAYER DESIGNED AND MADE IN ENGLAND BY MERIDIAN AUDIO LTD DESIGN AND COPYRIGHT 2003 Analogue outputs Digital output Optical output Use this output To connect to this ANALOGUE OUT The analogu

  • ANALOGUE OUT DIGITAL OUT OPTICAL OUT MERIDIAN COMMS MAINTENANCE RS232 IR INIR IN WARNING SHOCK HAZARD - DO NOT OPEN NO USER SERVICEABLE PARTS INSIDE CLASS 1 LASER PRODUCT DOUBLE INSULATED PRODUCT SERIAL NUMBER TESTEDTESTED TESTED VOLTAGEVOLTAGE VOLTAGE CAUTION REPLACE WITH SAME TYPE FUSE T160mAL for 100 - 120V T80mA for 220 - 240V POWER INPUT ~50-60Hz 40VA MAX ON OFF L R G07 24-BIT C

  • Meridian G series, Troubleshooting 17 Maintenance Cleaning To clean the case, display panel, and keypad • Disconnect the power cord before cleaning the unit. The exterior surfaces of Meridian G Series products are made from solid anodised aluminium, powder coated steel, thermoplastic rubber, and glass. They are designed to be easily wiped clean with a dry, lint free cloth. Greasy marks should be removed by light rubbing with a slightly damp cloth and a trace of proprietary glass cleaner. Do not use any other solvent or abrasive based cleaners. Dust ca

  • Meridian G series, A description of each Type is shown on the top line of the display. As you select each Type the CD player is reset to that Type. When you have selected the Type you want: • Press Exit or On/Off to return to standby. Types The following table lists the available Types: Type Description Type 1 Volume display off. Type 2 Volume display on. Type 3 (G08 only) Volume display off, digital output limited to 44.1kHz. Although the CD players do not include a volume control, they can optionally display the system source and volume, for example when used with a pair of DSP420 In-Wall Loudspeaker

  • Meridian G series, G08 24-bit Upsampling CD Player G08 24-BIT UPSAMPLING CD PLAYER DESIGNED AND MADE IN ENGLAND BY MERIDIAN AUDIO LTD DESIGN AND COPYRIGHT 2003 TESTEDVOLTAGE WARNING SHOCK HAZARD DO NOT OPEN NO USER SERVICEABLE PARTS INSIDE SERIAL NUMBER CAUTION REPLACE WITH SAME TYPE FUSE T1.6AL 250V for 100 - 240V POWER INPUT ~50-60Hz 40VA MAX ON OFF OPTICAL OUT DIGITAL OUT IR INANALOGUE OUTBALANCED OUT R BALANCED OUT L MERIDIAN COMMSMAINTENANCE RS232 WARNING SHOCK HAZARD - DO NOT OPEN NO USER SERVICEABLE PARTS INSIDE CLAS

  • Meridian G series, To connect to a preamplifier with unbalanced inputs (eg G01/G51) ANALOGUE OUT COMMS COMMS PHONO LEADS COMMS LEAD G01/G51G07 24-bit CD Player ANALOGUE IN A2 To connect to Meridian DSP loudspeakers (eg DSP5000s) DSP5000 – Slave DSP5000 – Master COMMS INPUT OUTPUT DIGITAL INPUTS 2 1 M5 LEAD S5 LEAD DIGITAL OUT COMMS G07/G08 DIGITAL OUTPUT COMMS INPUT OUTPUT DIGITAL INPUTS 21 DIGITAL OUTPUT Installing the CD player 9 • Connect the ANALOGUE OUT outputs from the G07 or G08 to the unbalanced inputs on the preamplifier, using phono leads. • If the preamplifier is a Meridian product connect t

  • Meridian G series, Preface iv Copyright and acknowledgements Sales and service in the UK Meridian Audio Ltd Stonehill Stukeley Meadows Cambridgeshire PE29 6EX England Tel +44 (0)1480 445678 Fax +44 (0)1480 445686 Sales and service in the USA Meridian America Inc 3800 Camp Creek Parkway Building 2400 Suite 122 Atlanta GA30331 Tel +1 (404) 344 7111 Fax +1 (404) 346 7111 World Wide Web – http://www.meridian-audio.com/ Copyright © 2003 Meridian Audio Ltd Designed and manufactured in the UK by Meridian Audio Ltd. Meridian

  • Meridian G series, Introduction 3 The G08 employs a triple buffering system to minimise jitter. This maximises high-frequency transparency and stereo image precision and stability. This, and the digital electronics as a whole, is driven by a new design of high-stability clocking system which further reduces jitter and ensures that the highest level of detail is recovered from a disc. All digital data is accurately re-clocked. Multiple power supplies ensure that digital and analogue circuitry are kept apart and can provide the required power when called upon to do so. The G08 player includes both balanced (on XLR connectors) and unbalanced (on phono connectors) two-channel analogue outputs. S/PDI

  • Meridian G series, Troubleshooting 16 No lights are displayed when switching on • Check that the AC power supply is connected correctly. • Check that the ON OFF switch on the back panel is in the ON position. There is interference on the radio and/or television when the CD player is switched on Before following the steps below, ensure all units are switched off. If this equipment suffers interference from, or causes interference to, radio or television reception, then the following measures should be tried: • Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the CD player and its cabling. • Ensure that the receiver uses well-scr

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Xpelair digitemp 91173AA WA 210 Installation manual xpelair/digitemp-91173aa-wa-210-2E1.pdf 19 Oct 2023 29
2 Maico 250-B Owner's manual maico/250-b-RLX.pdf 24 Mar 2024 21
3 PQI U350H Specifications pqi/u350h-9X3.pdf 02 Feb 2024 7
4 Axis M1103 Operation & user’s manual axis/m1103-528.pdf 25 Oct 2023 49 2.45 Mb
5 Electrolux ER 7824 D Instruction book electrolux/er-7824-d-51W.pdf 18 Mar 2024 6 0.2 Mb
6 3Com WL-603 Operation & user’s manual 3com/wl-603-1E9.pdf 27 Jan 2023 182 5.16 Mb

Similar Resources:

  • THOMSON

    TM9237

    (5 pages)
    ENSafety InformationCAUTION!Invisible laser radiation when open. Avoid exposureto beam. Class 1 laser product. This system must beopened only by qualified technicians to preventaccidents caused by the laser beam.LASER λ = 780 nm, P max = 5 mWRating Information: At bottom of the unitthis unit comply with the existing requirementsCAUTION – INVISIBLE L …
  • Hyundai

    H-1436

    (13 pages)
    лчиттничюнльтцию.глтчн.Бзвыдныwww.sotmarket.ruдбняинфмциятв,тзывы,бзыиыИнструкцияHyundai H-1436Перейти …
  • Astin Trew

    AT 3000

    (13 pages)
    ASTINtrew6 Varnell TerraceHambleden Oxfordshire RG9 6SATelephone: +44 [0]1491 414494Facsimile: +44 [0]1491 413303Email: [email protected]: www.astintrew.co.uk …
  • Aiwa

    ADC-EXI06

    (32 pages)
    m!r❑IGITAL AUDIO~ADC-EXI06YUCOMPACT DISC CHANGERCAMBIADOR DE DISCOS COMPACTOSB“.OWNER’S RECORDFor your convenience, record the model numberand serial number (you will find them on the rear ofyour set) in the space provided below. Please referto them when you contact your AIWA dealer incase of difficulty.Model No. IADC-EX106‘eria’ ‘0 ~ …
  • JVC

    RC-BZ5LB

    (60 pages)
    SERVICE MANUALCD PORTABLE SYSTEMNo.20819July. 2000Printed in Japan200007(S)RC-BZ5LB/BZ5RDRC-BZ6BU(No.20819)RC-BZ5LB/BZ5RDRC-BZ6BUSafety precautionsImportance administering point on the safety Preventing static electricityImportant for laser productsDisassembly methodAdjustment methodDescription of major ICsRC-BZ5LB/BZ5RDREMOTE CONTROL RM-SRCBZ5REMOTE CON …
  • KAM

    KCD MIX100

    (1 pages)
    KAM KCDMIX100ALL IN ONE CD DJ MIXING SYSTEMINSTRUCTION MANUALwww.kam.co.ukKAM KCDMIX100ALL IN ONE CD DJ MIXING SYSTEMTo use Program; 1. Press Program button. 2. Use the trackskip buttons to locate the desired track. 3. PressPROGRAM button again and this selection will be stored soyou can move on to selecting the next track. 4. Press PLAY.The unit will remai …

Comments, Questions and Opinions: