Manualios.com

Metz 70TL67 Operating Instructions Manual

Metz 70TL67 Manual Online:

4.2, 824 votes
Metz 70TL67 User Manual
Metz 70TL67 User Guide
Metz 70TL67 Online Manual

Text of Metz 70TL67 User Guide:

  • Metz 70TL67, 62 Station search . . . . . . . . . . . . . . . . . . . . . . .15 Station search, automatic . . . . . . . . . . . . . . .14 Stations, deleting . . . . . . . . . . . . . . . . . . . . .18 Stations, selecting . . . . . . . . . . . . . . . . . . . .18 Stations, shifting . . . . . . . . . . . . . . . . . . . . .18 Stations: shifting, copying and deleting . . . . .18 Stereo wide . . . . . . . . . . . . . . . . . . . . . . . . .55 Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Summer time . . . . . . . . . . . . . . . . . . . . . . . .31 Switching voltage, devices with . . . . . . . . . . .41 S

  • Metz 70TL67, 61 Info (information) . . . . . . . . . . . . . . . . . . . . . .8 Initial programme position . . . . . . . . . . . . . .50 Language for TV menu . . . . . . . . . . . . . . . . .13 Marks in Teletext . . . . . . . . . . . . . . . . . . . . .37 Marks, index . . . . . . . . . . . . . . . . . . . . . . . .37 Marks, setting and deleting . . . . . . . . . . . . . .37 Menu language . . . . . . . . . . . . . . . . . . . . . .13 Menus, menu control . . . . . . . . . . . . . . . . . . .9 Multiple pages, sub-pages . . . . . . . . . . . . . .36 NexTView . . . . . . . . . . . . . . . . . . . . . . .44-49 NexTView recording . . . . . . . . . . . . . . . . . .49 Noise reduction .

  • 15 Call the menu7. Programming stations b) Station search The station search function permits you to search for specific stations if you do not know their chan- nel number or frequency. Executing a station search • Press the „MENU“ key to display the TV menu. • Press the white key to display the station table. • Move the cursor to en empty programme posi- tion (or to a position contain

  • Metz 70TL67, 14 7. Programming stations You can programme the TV stations in three diffe- rent ways. a) Automatic station search The automatic station search function searches the entire range of reception frequencies for TV stations. All stations which are found are placed in a station table, which is displayed at the end of the search operation. If you are not satisfied with the order in which the stations are stored, you can shift or delete stations (see Section 9, "Sorting stations"). Executing an automatic station search • Press the „MENU“ key to call the TV menu • Press the red key to open the „Configuration“ menu. • Use the cursor control key to select "Automa

  • Metz 70TL67, 20 11. Picture settings, generalCall the menu In a menu with two asterisks (**), the set- tings for certain menu items cannot be changed. You can adjust the picture settings (brightness, contrast, chrominance, etc.) for all programme positions and save these settings as the standard values. These standard values can be recalled at any time by pressing the „OK“ key. Defining the picture settings: • Press the „MENU“ key to open the TV menu. • Press the „OK“ key to open the menu „Pi

  • Metz 70TL67, 21 11. Picture settings, general Call the menu In a menu with two asterisks (**), the set- tings for certain menu items cannot be changed. Panorama 2) function This setting can be made only on 16:9 TV sets. The panorama function can be used to expand "normal" programmes in 4:3 format to the 16:9 format. This is done by increasing the width of the picture to fill the complete width of the screen. Setting Panorama 2) mode: • Press the "MENU" key to open the TV menu. • Press the "OK" key to open the menu "Picture and sound". • Use the cursor control key to select "Panorama". • Press the "OK" key and then, in the setting wi

  • Metz 70TL67, 51 The following procedures are intended only for cases where the batteries of the remote control unit are exhausted or the remote control unit is not available. The TV controls are at the front of the set. Depen- ding on the TV model, they are located underne- ath a cover which can be opened by pressing at the marked position. Switching on Press the main switch on the TV set to switch to standby mode. To switch the set on with program- me position 1 selected, press and hold the key F or P until the green LED lights up. You can also execute the following functions with the controls on the front of the TV set. The prese- lected function remains active for

  • Metz 70TL67, 34 20. Special functions 9-programme overview Call the menu With this function, you can open an overview of the current programme position and the next eight positions. The nine small programme windows are updated at intervals. Each shows a snapshot of the current programme. Calling the 9 PRG. over view: • If "F1" is already programmed with the function "9x multipicture", briefly press the "F1" key; otherwise, hold the "F1" key depressed until "Special functions 1"

  • 13 6. Setting the language and country In a menu with two asterisks (**), the set- tings for the menu items "Language" and "Country" cannot be changed. Setting the language for the TV menu You can select one of the available languages for the display of the TV menu. All texts in the menu and in the help function (Information) are then displayed in th

  • 12    The full TV menu is displayed   A reduced TV menu is displayed. The follo- wing functions are no longer available: - Special picture settings such as panorama, CTI, noise reduction, picture sharpness, etc. - Special sound settings such as stereo wide, spati- al sound, balance, tone settings, etc. - Picture and sound settings for individual pro- gramme positions. - Program

  • Metz 70TL67, 44 NexTView is an Electronic Program Guide (EPG) for all important programme providers. This EPG is transmitted by various stations and also contains the programme data for the other stations. The TV set needs about 20 minutes to collect the large amount of data for the first time. • On TV sets with two tuners (standard configura- tion) the data are collected by the second tuner (see the next page) during normal operation of the TV set. When the data have been collected, the TV set stores the EPG in a sp

  • Metz 70TL67, Metz-Werke GmbH & Co. KG Postfach 1267, D-90506 Zirndorf Fon: +49 911 - 97060 Fax: +49 911 - 9706340 www.metz.de [email protected] Errors excepted. Subject to changes. ķ Printed in Germany Metz - allways first class. Metz - Werke GmbH & Co. KG - Zirndorf near Nürnberg Core competence in the areas of electronics and plastics technology to form the basis of the excellent reputation of the Metz Werke that has been built up throughout the world over a period of many decades. Metz offers quality made in Germany: Consumer electronics, mecablitz flash units, plastics technology and industrial electronics.        Service Centre Training Centre Ad

  • Metz 70TL67, 39 22. AV devices Call the menu MENU OK OK AV (Audio/Video) devices are devices which provide picture and/or sound signals for play- back on your TV set (for example, video cas- sette recorders, DVD players, etc.). In the menu „AV devices“, the setting window displays a list of all common AV units. Always connect AV devices exactly as shown in the connection diagram in the TV menu of your TV set! SVHS/Hi8 and Data Logic video recorders must always be connected as „Video recorder 1“. A „nor- mal“ VHS video recorder may be connected as „Video recorder 1“ or „Video recorder 2“. Connecting AV devices • Press the „MENU“ key to open

  • Metz 70TL67, 53 27. Options • Satellite upgrade kit 081 NH 1017 for reception of satellite stations without the need for a separate SAT receiver. • Satellite upgrade kit 083 NH 1014 similar to the above, but also capable of recei- ving unencrypted ADR (Astra Digital Radio) sta- tions. • DVB-S upgrade kit 024 NK 1029 or 024 NL 1126 for reception of analogue and digital satellite sta- tions broadcasting TV, radio and Astra Digital Radio (ADR) programmes without the need for a separate SAT receiver. • DVB-T upgrade kit 056 NH 1114 (CI) for the reception of digitally transmitted terrestrial TV and radio stations which can be receive

  • Metz 70TL67, 18 9. Sorting stations In the station table, you can shift or copy one or more stations to other programme positions. You can also delete any unwanted stations. Copying, shifting and deleting stations • Press the „MENU“ key to call the TV menu. • Press the white key to call the station table. • Press the „F1“ key to enable editing of the sta- tion table. • Use the cursor control key to select the pro- gramme position you want to copy, shift or delete. • Press the „OK“ key to mark this programme position: the text colour changes to orange and an asterisk is displayed after the last digit of the programme position number (in the example on the lef

  • Metz 70TL67, 22 11.1 Picture settings for a specific programme posi tion ... Call the menu In a menu with two asterisks (**), the pictu- re settings for a specific programme posi- tion cannot be changed. If the standard settings are not satisfactory for cer- tain programme positions, you can define diffe- rent settings for these positions with the menu item „Picture settings for Pr ...“. These settings apply only to the selected programme position and can- not be overwritten by the standard settings. Defining different picture settings for Pr. xy: • Select the programme position for which you want to define different pic- ture

  • Metz 70TL67, 27 Call the menu15. Childlock With this function, you can determine when the TV set can be switched on and which program- mes may be viewed at specific times. The child- lock may be set: a) for all programmes, b) so that one to six programmes (Prog A ... Prog F), called permitted programmes can still be viewed, c) so that all or all permitted programmes may be viewed during a preset period (between the specified start and end times). After setting, the childlock must be saved with a 4-digit „Code“ Setting the childlock: • Press the „MENU“ key to open the TV menu. • Press the green key to

  • Metz 70TL67, 59 Immediate recording of a terrestrial sta- tion (received via your house antenna or cable) with Data Logic does not work. • The Data Logic video recorder is not connected to the house antenna or cable outlet. • Connect the Data Logic video recorder to the house antenna or cable outlet with the aid of an antenna cable. Data Logic does not work. • The Data Logic video recorder with data interchange has not been set up correctly in the TV set. • The Data Logic video recorder is not connected to the EURO1 socket. • The Euro-AV (Scart) cable being used does not have all 21 pins connected. • In the menu „AV devi- ces“, define the Data Logic video recorder as video

  • 42 AV playback (Devices without switching voltage) In order to view the pictures, you must manually switch your TV set to playback mode. • Select any programme position. • Press the „AV“ key. • Press the numeric key for the desired AV device. • The TV set now switches from the cur- rent programme to playback mode. • Start the playback operation

  • Metz 70TL67, 60 Automatic station search . . . . . . . . . . . . . . .14 Automatic zoom . . . . . . . . . . . . . . . . . . . . .26 AV devices, connecting . . . . . . . . . . . . . . . . .39 AV programme position . . . .27, 40, 49, 50, 55 AV picture-in-picture (PIP) . . . . . . . . . . . . . . .33 AV playback, devices with switching voltage .41 AV playback, devices without switching voltage .42 Batteries for remote control unit . . . . . . . . . . .6 Camcorder, connecting . . . . . . . . . . . . . . . .39 Channel frequency setting

  • Metz 70TL67, 49 23.3 Using NexTView Recording a programme If you have a Metz video recorder with dialogue system, the NexTView programme guide permits you to start a recording by pressing a single key. • Open the NexTView programme guide. • Use the "P+/P-" rocker key to select the pro- gramme you want to record. If a video recorder with dialogue system is con- nected: - Switch on the video recorder. - Insert a cassette. - Press the red key on the remote control of the TV set. If a normal video recorder is connected: - Switch on the video recorder. - Insert a cassett

  • Metz 70TL67, 38 Teletext: scrolling by marks 3) With Teletext active, you can scroll sequentially through all marked pages by repeatedly pressing the green key You can even view your favourite pages directly from the TV mode with the „TEXT“ key. Pressing the „TEXT“ key opens Teletext and selects the first marked page. You can then scroll through the marked pages with the „TEXT“ key. Pressing the „TEXT“ key with the last marked page displayed switches back to the TV programme. T eletext: displaying active marks 3) If marks are set for a progra

  • Metz 70TL67, 17 8. Station logo Each station which transmits VPS signals also sends a station logo with up to eight characters, which is automatically assigned to this station in the station list. If this automatic function does not work correctly, or if you want a different station logo, you can overwrite the logo manually. Setting the station logo • Select the desired programme position. • Press the „MENU“ key. • Press the white key to open the station table. • Move the cursor to the subject card „Logo“. • Press the „OK“ key to confirm your selection. In the setting window, y

  • Metz 70TL67, 45 The EPG function can be switched on by pressing the keys "F3" and  if an EPG programme posi- tion is defined in the menu (see below). On all programme positions where NexTView is received, the TV set displays the following messa- ge after a short delay: This station is sending NexTView (EPG). Save it as the EPG programme position? • Yes • No The TV set is asking you whether you want to use this programme position for collecting the data for the EPG NexTView. Press the red key for "N

  • Metz 70TL67, 48 23.3 Using NexTView Setting the user By repeatedly pressing the green key, you can set the current user (father, mother, teenager, child) for the NexTView programme guide. Setting preferences Each user can set the NexTView pro- gramme guide to reflect the personal preferences. • Press the white key . • Use the "P+/P-" rocker key to select one of the blue cards. • Use the cursor control key to switch to the yellow page. • Use the "P+/P-" rocker key to select the appropriate yellow cards and mark each o

  • Metz 70TL67, 40 Call the menu Data Logic video recorder „Data Logic“ is a system which permits a dialogue between the TV set and a video recorder. This „intelligent“ system provides such functions as: - Automatic transfer of the settings for terrestrial and cable stations to the video recorder. - One-touch recording: the video recorder records the programme you are currently watching. - Automatic switching to the AV programme position. - Direct control of recording from the timer menu of the TV set. - Automatically switching off the video recorder when the TV set is switched to standby mode. In the menu „AV devices“, activate the option �

Related Products and Documents (TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Viking Designer FDB200 Installation notes viking/designer-fdb200-3O8.pdf 24 Jul 2023 6 0.44 Mb
2 Hotpoint CTX18BACWW Specification hotpoint/ctx18bacww-4UY.pdf 10 Mar 2023 2 0.19 Mb
3 Craftsman 28813 - 46 in. Lawn Tractor Operation manual craftsman/28813-46-in-lawn-tractor-V9G.pdf 22 Jul 2023 68 19.22 Mb
4 Zeki TBQG855NB Operation & user’s manual zeki/tbqg855nb-53A.pdf 22 Jul 2022 20
5 Sony ICF-C773 Operating instructions sony/icf-c773-V86.pdf 09 Aug 2023 2 0.56 Mb
6 Sony NEX-7 Instruction Manual Handbook sony/nex-7-instruction-manual-138.pdf 03 Oct 2022 211

Similar Resources:

  • Toshiba

    MD30H82

    (59 pages)
    SERVICE MANUALDOCUMENT CREATED IN JAPAN, May, 2006 GREENCOLOR TELEVISION/DVD VIDEO PLAYERMD30H82FILE NO. 810-200655GRThe above model is classified as a green product (*1), as indicated by the underlined serial number.This Service Manual describes replacement parts for the green product. When repairing this greenproduct, use the part(s) described in this manu …
  • RCA

    20F420T

    (2 pages)
    20F420T20” Diagonal Flat Screen Televison Features and BenefitsOn-Screen Menu SystemFavorite Channel ListOn-Screen Calendar, Notepad, Sleep & Wake TimerProduct Size (H x W x D): 18.8 x 21.5 x 19.8 inches …
  • Philips

    DVDR615/37B

    (2 pages)
    Quick install guideConnecting your DVD recorder to the TVset/Initial installationAttention ! Until the initial installation has been completed, the buttons on the frontwill not function.1Remove the antenna or cable TV signal from your TV. Connect itto the ANTENNA IN jack at the back of the DVD recorder.2Insert one end of the supplied antenna cable into the T …
  • Haier

    HLC22E

    (43 pages)
    Please read this manual carefully before using this TV set and keep it for future reference.LCD TV/DVD Player ComboUSER MANUAL HLC15B / HLC15E / HLC19W / HLC19E / HLC22E A D A A AR …
  • Samsung

    PN60E8000 E-

    (107 pages)
    E MANUALSUPPORTThank you for purchasin9 this Samsuno oroquc_.To recewe more complete service, please registeryour product atwww.samsung.com/registerVlodel Serial No. …
  • Panasonic

    TX-28MD3P

    (37 pages)
    ServiceSupportServiceandrepairofthisproductissupportedbyPanasonic'sLUCIinterface.ThisinterfaceprovidesalinkbetweentheTVandastandardPCtoallowanumberofdiagnosticandcontrolfunctionstobeperformed.FormoredetailscontactyourlocalPanasoniccompany.BACKTX-28/25/21MD3P ServiceManualSafetySpecificationsBlockDiagramsSchematicDiagramsPCBViewsSelfCheckServiceInformati …

Comments, Questions and Opinions: