Manualios.com

Microtek MHP1-HD Operation & User’s Manual

Microtek MHP1-HD Manual Online:

3.25, 2832 votes
Microtek MHP1-HD User Manual
Microtek MHP1-HD User Guide
Microtek MHP1-HD Online Manual

Text of Microtek MHP1-HD User Guide:

  • 28 • Adding/Deleting Channels You can add or delete individual channels using the on-screen menus, so that the menus do or do not appear when you move through channels using CH or CH . To add or delete channels: 1. Select the channel you want to add or remove. 2. Press the MENU button on the remote control or on the PDP unit. 3. Press the UP/DOWN ( / ) b

  • Microtek MHP1-HD, 9 42" PLASMA DISPLAY Front View The following illustration shows the components on the front side of the PDP. CH VOL M E N U SOURCE Power indicator Indicates when the power is on. Standby state — Red Operating state — Green Warm up state – Orange IR receiver Point the remote control at the IR (Infrared Remote) receiver to operate the PDP. Base unit * SOURCE button Press this button to switch between source signals: HDTV (YPbPr), S-Video 1, Video 1, TV1 YCbCr, S-Video 2, Video 2, and TV2 (optional) MENU button Press this button to open the on-screen menu. VOL (–/+) button Press VOL+ to increase the volume. Press VOL – to dec

  • 2 Preface Copyright Copyright © 2005, Microtek International, Inc., all rights reserved. This document may not be reproduced or copied in any way, stored electronically, or translated into any language, without the permission of Microtek International, Inc. Disclaimer The contents of this manual have been checked carefully for accuracy and every effort has been made to e

  • Microtek MHP1-HD, 47 42" PLASMA DISPLAY Specifications Model Type MP42H2NS Display Area 36.73” x 20.97” (932.94 x 532.80 mm) Screen Size 42” diagonal Display Color 1.07 billion Resolution 1024 (H) x 768 (V) pixels Dot Pitch 0.912 mm (H) x 0.693 mm (v) Scanning Frequency 31.5~64.0 KHz (H); 56.3~75.0 Hz (V) Aspect Ratio 16:9 Brightness 1100 nit (Max.) Contrast Ratio 10000:1 (Max.) Viewing Angle 173° Video System SDTV/EDTV/HDTV 480i/480p/720p/1080i Color System NTSC M, NTSC Japan, NTSC 4.43, PAL M, PAL B, D, G, H, I, N, Co

  • Microtek MHP1-HD, 18 Connecting External Devices to Your PDP You can connect many types of audio visual and entertainment devices to the PDP. Most audio/video devices offer a choice of several connection types. The most common types are Standard composite (AV) cable, S-Video cable, and Component cable (YCbCr/YPbPr). S-Video provides higher quality picture transmission than composite cable, and Component cable (YCbCr/YPbPr) provides the highest quality picture transmission. Some devices, including projectors, computers, and set-top boxes, also have DVI interfaces. You may choose any of the connection types offered on a device, based on the conveni

  • Microtek MHP1-HD, 13 42" PLASMA DISPLAY Installing the Speakers Two side-mounted speakers are included in the PDP package. Follow the steps to mount the speakers and connect them to the speaker outputs on the rear panel of the PDP: 1. Before beginning, make sure the main power switch on the PDP’s rear panel is switched off. 2. The screws for the speakers are already installed in the PDP. Remove the four screws from the left and right edges of the rear panel, as indicated in the diagram below. . 3. Two speaker brackets are provided for each speaker, along w

  • Microtek MHP1-HD, 43 42" PLASMA DISPLAY TV Rating The TV rating system is defined as follows: TV-Y - Suitable for all audiences, including children. TV-Y7 - Primarily intended for children over the age of 7 years. TV-G - For a general audience. TV-PG - Parental guidance recommended. May contain some elements that parents think are unsuitable for children. TV-14 - Parents strongly cautioned. Likely to contain some elements that parents think are unsuitable for young children. TV-MA - Only suitable for adults. (v: Available) To lock TV programs: 1. Enable the V-Chip function, following the procedures listed in the “Turning the V-Chip on” section. 2. Press the UP/DO

  • Microtek MHP1-HD, 37 42" PLASMA DISPLAY Opening a PIP Window To open a PIP window: 1. Select an input source for the main screen first by pressing the TV/VIDEO button on the control button or use the on-screen menu. When the button is pressed, the name of the available input sources appear on the screen. Press the UP/DOWN ( / ) button to move through available sources, then ENTER to confirm your selection. To close a PIP window, press the PIP button again. Selecting PIP Input Source To select a PIP window source, press the SOURCE button on the remote control or use the on-screen menu. The name of the available input sources appear on t

  • Microtek MHP1-HD, 39 42" PLASMA DISPLAY Changing the Aspect Ratio The Aspect menu enables you to set aspect ratios (ratios of width to height) for the display. When watching a movie, for example, you may wish to select Wide to recreate the dimensions of a theater screen. To access aspect ratio settings: 1. Press the MENU button to view the main menu. 2 Press the UP/DOWN ( / ) button to select “Aspect”, then press the ENTER button. 3. Press the LEFT/RIGHT ( / ) button to toggle through option settings for a user setting, then press the MENU button twice to exit the me

  • 25 42" PLASMA DISPLAY Specifications for Computer Modes For most settings, the computer uses Plug and Play technology to adjust itself to the settings of the PDP. For certain settings, however, the size and position of the image shown on the PDP may be determined by the computer. The following table shows display elements determined by the computer and supported by the PDP.

  • Microtek MHP1-HD, 23 42" PLASMA DISPLAY Connecting to a Second PDP or Monitor You can send output from the PDP to a second PDP or other video device by connecting a composite video cable from the TV1 and Video 1 outputs on the rear of the PDP. To connect to a second PDP follow these steps: 1. Connect the Video Out output of the PDP to the video input of the secondary device using a composite video cable. Connect the audio (white and red) to Audio Out (L, R) connectors. 2. Turn on the PDP and the second PDP o

  • Microtek MHP1-HD, 27 42" PLASMA DISPLAY • Selecting the Video Input Source Press the TV/VIDEO button on the remote control or the SOURCE button on the PDP unit to select video input source from another device connected to your PDP. For example, if you are connected to HDTV (YPbPr), select “HDTV”, then ENTER to confirm your selection. You can also set the video input source through the on-screen menu. See the section, “Selecting Input Source” in Chapter 5: Using the PDP’s Features. Selecting the TV System There are several TV standards in use around the world.

  • 21 42" PLASMA DISPLAY Connecting to a Camcorder or Video Game Set Connecting to a camcorder enables you to play and view videos directly from the camcorder without transferring first to another tape or disk. Connecting to a video game set enables you to play video games and enjoy high quality graphics and on the large, colorful picture of the PDP. Both camcorders and video game set

  • Microtek MHP1-HD, 12 CHAPTER 2 Setting Up the PDP This section explains how to install the PDP, connect it to power, and connect it to an antenna or TV cable to view TV programs. It also explains how to connect to various audio/video devices using the inputs located on the rear panel of the PDP. Before Using Your PDP Follow these guidelines when placing your PDP: • Use only the stand (or wall mount unit) or mounting kit made especially for the PDP to mount the PDP. • Improper installation (or incorrect mounting steps) could result in damage to the PDP or injury to the installer. • Ensure that the PDP has adequate ventilation. Do not block the ventilation slots, and do not place th

  • Microtek MHP1-HD, 8 Package Contents Ensure that the following items are included in your package. If there are any damaged or missing parts, contact customer service. PDP with base stand attached Remote control Two AAA batteries (for use with remote control) User Manual Power cable Speakers (2) Speaker cables (2) Cable clamps (2) Accessories for PDP Speakers Speakers for the PDP are included in your plasma display as standard accessories. Make sure that the following items are included after you have unpacked your speakers. Screws (8) Speaker brackets (4)

  • Microtek MHP1-HD, 22 Connecting to a DTV Receiver (Set-Top Box) Digital TV (DTV) broadcasting is now available in many areas, and the PDP supports DTV technology needed to receive DTV broadcasting. With DTV broadcasting, you can enjoy high definition picture, a wide 16:9 aspect ratio, and Dolby Digital surround sound. Most DTV services provide you with a digital set-top box. These digital set-top boxes usually use component video (YPbPr) connections To connect a DTV receiver (set-top box) to the PDP: Connect the YPbPr (component video) cable to the YPbPr input on the PDP. YPbPr cable is color coded green, red, and blue; YPbPr cable does not include audio. The audio cable (L/

  • Microtek MHP1-HD, 38 Changing the Location of the PIP Window To change the location of the PIP window, press the POSITION button on the remote control, or use the on-screen menu. Each time you press the POSITION button, you can toggle though Up Left, Up Right, Lower Left, and Lower Right options. The selected option takes effect on the screen immediately. Alternating the PIP and Main Screen Sources To alternate the PIP and main screen sources, press the SWAP button on the remote control or use the on-screen menu. NOTE: If you swap a window to a

  • 4 17. Unplug this product from the power outlet and consult qualified service personnel for servicing under the following conditions: a) If the power-supply cord or plug is damaged. b) If liquid has been spilled or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Ad

  • Microtek MHP1-HD, 26 CHAPTER 4 Getting Started This section explains some of the basic features to set up so you can begin using the PDP. Turning the PDP On 1. Press the main power switch on the rear panel to supply power to the PDP. 2. Press the POWER ( ) button on the remote control or on the PDP unit to turn the PDP on. NOTE: If you need to disconnect power, first put the PDP into standby mode by pressing the POWER ( ) button on the remote control or on the PDP unit, then turn off power using the main power switch on the rear panel of the PDP unit. Select

  • Microtek MHP1-HD, 20 Connecting to a DVD Player Connect a DVD player to the PDP to view DVD discs. If you have a DVD recorder, you can record a TV channel you are watching, or record from one channel while watching another. You can also connect the TV cable to the DVD and use the DVD connection to view TV programming. To connect a DVD player to the PDP: Connect the audio and video cables from the DVD player to the PDP, using one of the connections below. A. Connect the Standard composite (AV) cable video jack to the Video 1 or Video 2 connectors on the PDP. Connect the audio jacks to the Audio R/L connectors. Standard composite (AV) is

  • Microtek MHP1-HD, 15 42" PLASMA DISPLAY CHAPTER 3 Making Connections Follow the instructions in this section to connect your PDP to various audio/video devices, or to view TV programming from an aerial signal, cable box, or a digital set-top box. Connecting Power A master power switch is located at the rear of the PDP to completely turn power on and off. After connecting the power cord, you can control the PDP’s power with this switch. For everyday use, you can quickly and conveniently turn the PDP on or put it in standby mode by pressing the POWER ( ) button on t

  • Microtek MHP1-HD, 33 42" PLASMA DISPLAY Selecting Input Source The Source menu enables you to set an input source when connecting an antenna or using video equipment (such as a DVD or VCR). Set the source to match the type of connection you have made between the PDP and the video equipment. See Chapter 3 “Making Connections” for more information. Most of the sources are grouped into Group 1 or Group 2 sources. HDTV (YPbPr) is selected individually. The TV/Video button on the remote control can also be used to set the source. Details on how to use the TV/Video button can be found in the section, “Selecting the Input Source” in Chapter 4: Getting St

  • Microtek MHP1-HD, 19 42" PLASMA DISPLAY Connecting to a VCR After connecting a VCR to the PDP, you can view VHS tapes, record a TV channel you are watching, or record from one channel while watching another. You can also connect the TV cable to the VCR and use the VCR connection to view TV programming. To connect a VCR to the PDP: Connect the audio and video cables from the VCR to the PDP, using one of the connections below. A. Connect the Standard composite (AV) cable video jack to the Video 1 or Video 2 connectors on the PDP. Connect the audio jacks to the Audio R/L connectors. Standard composite (AV) is color c

  • Microtek MHP1-HD, 36 Viewing Picture-in-Picture (PIP) The PIP (Picture-in-Picture) window is a small window within the main window that displays programming from other channels or input sources. You can control the PIP source and PIP position through the PIP submenu or remote control. To access PIP the window settings: 1. Press the MENU button to view the main menu. 2. Press the UP/DOWN ( / ) button to select “PIP”, then press the ENTER button. 3. Press the UP/DOWN ( / ) button to select the item you would like to set. 4. Press the LEFT/RIGHT

  • Microtek MHP1-HD, 5 42" PLASMA DISPLAY Table of Contents Preface ................................................................................................................. 2 Safety Precautions................................................................................................ 3 CHAPTER 1 About Your PDP .................................................................................................... 7 Package Contents .............................................................................................................. 8 Front View ......................................

  • Microtek MHP1-HD, 24 Connecting to a Personal Computer You can use the PDP as a monitor for your PC. VGA is the most common type of computer connection; however, some computers also include DVI connections. To connect to a personal computer, follow these steps: 1. Connect the VGA or DVI cable from the computer to the VGA In or DVI In connections on the rear of the PDP unit. 2. For audio, connect computer audio cable from the Line out of the PC to the Audio In on the rear panel of the PDP using a phono audio cable. 3. Turn on the PDP and the computer. 4. Press the TV/VIDEO button on the remote control or the SOURCE button on the PDP unit to view and set input sources. Sele

  • 6 CHAPTER 5 Using the PDP’s Features .................................................................................... 30 Navigating the Menu ....................................................................................................... 30 Optimizing the Picture – Brightness, Contrast, Hue, Saturation, Sharpness, Mode, Swap ........... 31 Adjusting the So

  • Microtek MHP1-HD, 42 B. Changing the PIN code The change PIN feature allows you to change the current PIN to a new secret PIN to protect certain settings from being changed. 1. Enable the V-Chip function, following the procedures listed in the “Turning the V-Chip on” section. 2. Press the UP/DOWN ( / ) button to select “Change PIN”. You will be prompted to enter 4-digit PIN. 3. Enter your new secret PIN using the number buttons (0- 9) on the remote control. After the 4-digit PIN is entered, you will be prompted to enter the new 4-digit PIN again. 4. Enter the 4-digit PIN again to confirm it. 5. Press the MENU button twice to exit the menu

Related Products and Documents (Flat Panel TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Motorola GM360 Operation & user’s manual motorola/gm360-JWC.pdf 04 Aug 2022 60
2 BLUE SKY SUB 12 ACTIVE SUBWOOFER Owner's manual blue-sky/sub-12-active-subwoofer-5K2.pdf 29 Jan 2023 16
3 Samsung SGH S300 Operation & user’s manual samsung/sgh-s300-S6C.pdf 07 Jul 2023 8
4 Magnavox AJ3920 Kayttoohje magnavox/aj3920-U6R.pdf 25 Apr 2023 16
5 Craftsman 917.270751 Owner's manual craftsman/917-270751-VS9.pdf 11 Aug 2022 60 2.4 Mb
6 Emerson 3200 Operation & user’s manual emerson/3200-RJC.pdf 26 Jul 2022 20 0.61 Mb

Similar Resources:

  • Philips

    20HFL3330D

    (2 pages)
    PhilipsProfessional LCD TV51 cm (20") ProLCD integrated digital20HFL3330DAdvanced design at outstanding valuePhilips Digital Hospitality LCD TVWith this modern and energy efficient Hospitality TV, you will enjoy the benefits of digital television and be fully prepared for the future. Your guests will enjoy a warm welcome and great viewing experience.A …
  • Philips

    42PFL3604H/12

    (11 pages)
    Register your product and get support atwww.philips.com/welcomeStartQuick26PFL3404H/1232PFL3404H/1242PFL3604H/1226PFL3404D/1232PFL3404D/1242PFL3604D/12Q41G7830813 5B …
  • Samsung

    UN32C5000

    (51 pages)
    LED TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________ Serial No. _____________[UC5000_Web]BN68-02625A-01Spa.indd 1 2010-04-28 오후 2:55:31 …
  • Hitachi

    P50V701 - 50" Plasma TV

    (186 pages)
    PLASMA TELEVISIONOperating Guide for P50V701IMPORTANT SAFETY INSTRUCTIONS....................................................................................... 2-3FIRST TIME USE ......................................................................................................................... 4-25THE REMOTE CONTROL..................................... …
  • Panasonic

    VIERA TX-L32V10B

    (92 pages)
    TQB0E0814Please read these instructions before operating your set and retain them for future reference.The images shown in this manual are for illustrative purposes only.EnglishU.K. StandardOperating InstructionsLCD TelevisionModel No. TX-L32V10BTX-L37V10B …
  • Samsung

    HLP4663W - 46" Rear Projection TV

    (46 pages)
    1-800-SAMSUNG (1-800-726-7864)Samsung Electronics America Service Division400 Valley Road, Suite 201Mount Arlington, NJ 07856www.samsungusa.comSamsung Electronics Canada Inc. Samsung Customer Care7037 Financial Drive Mississauga, Ontario L5N 6R3www.samsung.caBP68-00283A-02DLPTVHL-P4663W/HL-P5063W/HL-P5663W/HL-P6163WDLPTVThis device is a Class B digital app …

Comments, Questions and Opinions: