Manualios.com

Samsung SPE-100 Operation & User’s Manual

Samsung SPE-100 Manual Online:

4.75, 1420 votes
Samsung SPE-100 User Manual
Samsung SPE-100 User Guide
Samsung SPE-100 Online Manual

Text of Samsung SPE-100 User Guide:

  • English _49 ● SETUP SCREEN Public DDNS : Select one of provided public DDNS servers when you use a public DDNS server. Host name : Enter the name of the host (i.e., host name of Dyndns) that is registered with the DDNS server. User name : Enter the user name for the DDNS service. (i.e., user ID that is regis- tered with Dyndns) Password : Enter the password for the DDNS service. (i.e., pas

  • Samsung SPE-100, 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine readable “ work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism

  • Samsung SPE-100, 34_ web viewer web viewer CONNECTING TO THE NETWORK ENCODER Normally, you would Launch the Internet browser. Type the IP address of the network encoder in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111  http://[2001:230:abcd:ffff:0000 :0000:ffff:1111] If the HTTP port is other than 80 Launch the Internet browser. Type the IP address and HTTP port number of the network encoder in the address bar. ex) IP address : 192.168.1.100:HTTP Port number(8080)  http://192.168.1.100:8080 - the Login dialog should ap

  • Samsung SPE-100, English _25 ● NETWORK CONNECTION AND SETUP CONNECTING THE NETWORK ENCODER TO AN IP ROUTER WITH THE PPPOE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to an IP router Configuring the network settings of the local PC connected to an IP router, follow the instructions below. Select : <Network Neighborhood>  <Properties>  <Local Area Connection>  <Properties>  <General>  <Internet Protocol (TCP/IP)>  <Properties>  <Obtain an IP address automatically> or <Use the fo

  • Samsung SPE-100, installation & connection 20_ installation & connection Audio Codec G.711 PCM. μ-law 64kbps 8kHz sampling Full duplex Audio Audio in Used for mono signal line input (Max.2.4 Vpp) Audio out Used for mono signal line output (Max.2.4 Vpp) Line out impedance 600Ω Alarm I/O Wiring Diagram For controlling the power with electrical contacts, a separate circuit is required.      J  3 GND 4 5 6 7 ALARM IN ALARM OUT (NC) ALARM COM ALARM OUT (NO) (12mA sink) (24VDC 1A, 125VAC 0.5A MAX)

  • Samsung SPE-100, 30_ network connection and setup network connection and setup Enter the password. This is the login password for the “admin” user who accesses the network encoder. The default password is “4321”. Click [OK]. Auto network setup will be completed. The network encoder will automati- cally complete the network setting and restart. DYNAMIC IP SETUP Dynamic IP Environment Setup Example of the Dynamic IP environment If an IP router, with network encoders connected, is assigned an IP address by the DHCP server If connecting the network encoder directly to modem using the DHCP protocols If IPs are assigned by the internal DHCP server via the LAN Checking the Dynam

  • Samsung SPE-100, 36_ web viewer web viewer This network encoder uses Microsoft Silverlight for displaying the video. INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. Click <Click Here>. When the file download dialog pops up, click <Run>. When the download is completed, click <Run>. The Silverlight Runtime installation page will be displayed. <Install now> to proceed with the installation. 1. 2. 3. 4.

  • Samsung SPE-100, English _61 ● APPENDIX SPECIFICATION Items Description Operational Video In CVBS : 1.0 Vp-p / 75Ω composite, NTSC/PAL Auto Detection Video Out CVBS : 1.0 Vp-p / 75Ω composite, LOOP OUT De-interlacing Filter Built-in Event Trigger Motion Detection, Alarm Input, Video Loss Alarm I/O Input 1ea / Output 1ea (Relay) Remote Control Interface RS-485 RS-485 Protocol SAMSUNG T/E, PELCO-P/D Network Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264, MPEG4, MJPEG Resolution NT : 704x480, 640x480, 352x240, 320x240 PAL : 704x576, 640x480, 352x288, 320x240 Max. Framerate NT : 30fps / PAL : 25fps Video Quality Adjustme

  • Samsung SPE-100, English _15 ● INSTALLATION & CONNECTION INSERTING/REMOVING AN SD MEMORY CARD Inserting an SD Memory Card Push the SD memory card in the direction of the arrow shown in the diagram. Do not insert the SD memory card while it’s upside down by force. Otherwise, it may damage the SD memory card. Removing an SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released. To remove the SD memory car

  • Samsung SPE-100, English _31 ● NETWORK CONNECTION AND SETUP PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed an IP router with a network encoder connected, you must set the port range forwarding on the IP router so that a remote PC can access the network encoder in it. Manual Port Range Forwarding From the Setup menu of the IP router, select <Applications & Gaming> - <Port Range Forward>. For setting the port range forward for a third-party IP router, refer to the user guide of that IP router. Select

  • English _59 ● SETUP SCREEN Factory default : Resets the system to the factory default. Except network parameter : Reset the other settings except for the interface/port/DDNS/IP filtering settings. All : Resets all settings including the network encoder settings. (however, the log information will not be reset) If you reset all settings, the IP address will be default

  • GPL/LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to [email protected] If you want to obtain the complete Corresponding Source code in the physical medium such a

  • Samsung SPE-100, English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. The BNC output port is used to monito

  • Samsung SPE-100, or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two st

  • Samsung SPE-100, setup screen 50_ setup screen Search for the public certificate that you want to install on the network encoder. To install the certificate on the network encoder, you need to provide a certificate name (it can be arbitrarily assigned by the user), certificate file issued from the certifi- cation authority and a key file. The <HTTPS(Secure connection mode using the public certificate)> item will be active only if there exists a public certificate installed. When done, click [Apply ( )]. Installing the certificate Enter the certificate name. Select the certificate file to be installed and certificate key, and click [Install ( )] butto

  • Samsung SPE-100, 32_ network connection and setup network connection and setup Setting up Port Range Forward for several network encoders When several network encoder connect to one IP router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected network encoder. If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the network encoder. TCP 943 port is a port for the Silverlight policy server of a network encoder. When Network encoder1 and Network encoder2 are connected to a router : You can set a rule of Port Forwarding on the IP router device

  • Samsung SPE-100, it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or mo

  • Samsung SPE-100, English _63 ● APPENDIX TROUBLESHOOTING PROBLEM SOLUTION I can’t access the network encoder from a web browser. Check whether the <Network> settings of the network encoder are valid and correct. Check to make sure that all network cables have been connected properly. If connected using DHCP, verify that the network encoder is able to acquire dynamic IP addresses without any problem. If connected using a DDNS URL, verify that the MAC address has been properly entered. If the network encoder is connected to a router, verify that port forwarding is properly configured.   

More Instructions:

DOWNLOAD

Related Products and Documents (Server):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sunbeam 2372 Instruction manual sunbeam/2372-E85.pdf 15 Apr 2023 32
2 Imation S-Class Specification sheet imation/s-class-XTJ.pdf 05 Dec 2022 1
3 Gorenje HKS3661EF User manual manual gorenje/hks3661ef-911.pdf 19 Jun 2022 24
4 Lexmark Z22 Operation & user’s manual lexmark/z22-42B.pdf 31 Jan 2024 44
5 Craftsman EZ3 917.387160 Owner's manual craftsman/ez3-917-387160-F37.pdf 28 Dec 2022 40
6 Nexus NX500 Owner's manual nexus/nx500-9L1.pdf 19 Oct 2023 25

Similar Resources:

  • Cisco

    ONS 15454 SDH

    (860 pages)
    Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 526-4100Cisco ONS 15454 SDH Procedure GuideProduct and Documentation Release 7.0 August 2012Text Part Number: 78-17194-01 …
  • HP

    ProLiant DL385p Gen8

    (135 pages)
    HP ProLiant DL385p Gen8 Server User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. Part Number: 661850-002 February 2013 Edition: 2 …
  • Moxa Technologies

    NPort 5410

    (2 pages)
    Reset Button—Press the Reset button continuously for 5 sec to load factory defaults: Use a pointed object, such as a straightened paper clip or toothpick, to press the reset button. This will cause the Ready LED to blink on and off. The factory defaults will be loaded once the Ready LED stops blinking (after about 5 seconds). At this point, you should rele …
  • Moxa Technologies

    NPort 5200-P Series

    (2 pages)
    — 1 — — 2 — — 3 — NPort 5200-P Series Quick Installation Guide Second Edition, July 2006 1. Overview Welcome to the programmable NPort 5200-P series, a compact palm-sized data communication device that allows you to control RS-232 (NPort 5210-P) or RS-232/422/485 (NPort 5230-P) serial devices over a TCP/IP-based Ethernet. 2. Package Chec …
  • HP

    ProLiant DL320e Gen8 v2

    (98 pages)
    HP ProLiant DL320e Gen8 Server Maintenance and Service Guide Abstract This document is for an experienced service technician. It is helpful if you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels and are familiar with weight and stability precautions for rack installations. …
  • IBM

    TotalStorage SAN140M

    (428 pages)
    IB M TotalStorage SAN140M Directo r Installation and Service Manual Service info rma tion: 20 27 / 140 GC26-7664-04 Read Before Using This product contains software that is licensed under written license agreements. Your use of such software is subject to the license agreements under which they are provided. …

Server Instructions:

Comments, Questions and Opinions: