Mitsubishi QA6ADP Operation & User’s Manual

Text of Mitsubishi QA6ADP User Guide:

• Mitsubishi QA6ADP, QA6ADP QA Conversion Adapter Module User’s Manual QA6ADP Thank you for buying the Mitsubishi general-purpose programmable logic controller MELSEC-Q Series Prior to use, please read both this manual and detailed manual thoroughly and familiarize yourself with the product. MODEL QA6ADP-U-JE MODEL CODE 13JY50 IB(NA)-0800402-B(0803)MEE © 2007 MITSUBISHI ELECTRIC CORPORATION

• Mitsubishi QA6ADP, 1 Revisions * The manual number is noted at the lower right of the top cover. Print Date *Manual Number Revision Aug., 2007 IB(NA)-0800402-A First printing Mar., 2008 IB(NA)-0800402-B Partial correction Section 2.2, 6.1 This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in t

• Mitsubishi QA6ADP, 2 CONTENTS 1. OVERVIEW....................................................................................................3 1.1 Overview ...............................................................................................3 1.2 Included Parts .......................................................................................3 2. SYSTEM CONFIGURATION .........................................................................4 2.1 System Configuration ............................

• Mitsubishi QA6ADP, 3 1. OVERVIEW 1.1 Overview This user’s manual describes the specifications, configuration device, part names and setting, and implementation and installation of the QA6ADP QA conversion adapter module. For contents that are not described in this manual such as safety precautions, EMC and low voltage directives, or error code list, refer to QCPU User’s Manual (Hardware Design, Maintenance and Inspection) (SH-080483). The QA6ADP is the adapter module connecting the A (large type) series extension base u

• Mitsubishi QA6ADP, 4 2. SYSTEM CONFIGURATION 2.1 System Configuration This section describes the system configuration and restrictions when the QA6ADP is used. (1) The QA6ADP+A5 B/A6 B is only applicable for the High Performance model QCPU (Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, and Q25HCPU). (2) Mount the Q5 B/Q6 B, QA6 B, and QA6ADP+A5 B/A6 B in order from the nearest position of the main base unit. The QA6ADP cannot be used in combination with the QA1S6 B. (3) The number of slots of the QA6ADP+A5 B/A6 B is always displayed in 8 slots, regardless of the number of

• 5 2.2 Configuration Device List (1) Extension base unit mountable on the QA6ADP The following shows extension base units that can be mounted on the QA6ADP. Product name Model Remarks Extension base unit (Power supply module not mounting type) A52B, A55B, A58B, A55B-UL, A58B-UL ---- Extension base unit (Power supply module mounting type) A62B, A65B, A68B, A65B-UL, A6

• Mitsubishi QA6ADP, 6 Product name Model Remarks High-speed counter module AD61, AD61S1 *1 A/D converter module A68AD, A68AD-S2, A68ADN, A616AD ---- D/A converter module A62DA, A62DA-S1, A68DAV, A68DAI-S1, A616DAV, A616DAI ---- Temperature-digital converter module A68RD3N, A68RD4N, A616TD, A60MX, A60MXRN, A60MXTN ---- Interrupt module AI61, AI61-S1 *2 AD70, AD72 ---- Positioning module AD75M1, AD75M2, AD75M3, AD75P1-S3, AD75P2-S3, AD75P3-S3 *1 A-A1S module conversion adapter A1ADP-X

• Mitsubishi QA6ADP, 7 3. SPECIFICATIONS 3.1 General Specifications This section describes general specifications of the QA6ADP. Item Specifications Operating ambient temperature 0 to 55 Storage ambient temperature -20 to 75 Operating ambient humidity 10 to 90 % RH, No-condensing Storage ambient humidity 10 to 90 % RH, No-condensing Frequency Accelera -tion Amplitude Sweep count 10 to 57 Hz ---- 0.075 mm Under intermittent vibration 57 to 150 Hz 9.8 m/s 2 ---- 10 to 57 Hz ---- 00.35 mm (0.001 in.) Vibration resistance Conforming to JIS B 3502, IEC 61131-2 Under continuous vibration 57 to 150 Hz 4.9 m/s 2 ---- 10 times each in X,

• Mitsubishi QA6ADP, 8 3.2 Performance Specifications This section describes performance specifications of the QA6ADP. Item Specifications 5VDC internal current consumption 110 mA External dimensions *1 130 mm (5.11 inch) (H) 73.5 mm (2.89 inch) (W) 74 (2.91 inch) mm (D) Weight 0.2 kg Adapter mounting screw (M3) torque 0.36 to 0.48 N•m Board fixing screw torque 0.61 to 0.82 N•m *1: The external dimensions show values in a status where the QA6ADP is mounted on the extension base unit.

• Mitsubishi QA6ADP, 9 4. PART NAMES AND SETTING 4.1 Part Names This section describes part names of the QA6ADP. 1) 6) 2) 3) 4) 3) 7) 9) 8) 5) No. Name Application 1) Extension cable connector Connector for sending/receiving signals to the main base unit or the other extension base unit and connecting an extension cable. 2) Stage number setting connector Connector for setting the number of extension stages. 3) Adapter module mounting screw (M3 screw) Screw for mounting this adapter module on the extension base unit. 4) Adapter module mounting bracket

• Mitsubishi QA6ADP, 10 4.2 Extension Stage Number Setting Set the number of extension stages to both the QA6ADP and the extension base unit. The same stage number should be set to both the stage number setting connector of the extension base unit and that of the QA6ADP. POINT Set any number of 1 to 7 which matches to the number of extension stages for the stage number setting connector setting. If the stage number setting of the QA6ADP and that of the extension base unit is different, the two or more settings are made to on

• Mitsubishi QA6ADP, 11 5. LOADING AND INSTALLATION 5.1 Mounting/Removal of QA6ADP (1) Mounting of the QA6ADP The following shows procedures for mounting the QA6ADP on the extension base unit. Mount a board fixing screw of the QA6ADP to a screw hole (A) at top left of the board. Connect an extension base unit mounting connector of the QA6ADP to the IN side of an extension connector of the extension base unit. Tighten the adapter module mounting screws of the QA6ADP at two parts (top and bottom), placing a mounting guide. Mount an upper mounting screw to

• 12 (2) Removal of the QA6ADP The following shows procedures for removing the QA6ADP from the extension base unit. M ounting bracket fixing screw Disconnect an extension cable form the QA6ADP. Remove the adapter module mounting screws of the QA6ADP at two parts (top and bottom). Remove the QA6ADP main body from the extension base unit. Remove a board f

• Mitsubishi QA6ADP, 13 5.2 Connection/Disconnection of Extension Cable (1) Precautions for handling an extension cable • Do not step on an extension cable. • When laying an extension cable, the minimum bend radius of the cable should be 55 mm (2.17 inch) or more. If it is less than 55 mm (2.17 inch), malfunction may occur due to characteristic deterioration, wire break etc. • When connecting or disconnecting an extension cable, do not hold ferrite cores mounted at both ends of the cable. In case of connecting/disconnecting a cable, hold the connector part of the cable. Extension cable Extension base uni t Connector Ferrite core Holding a ferrite

• Mitsubishi QA6ADP, 14 • To connect an extension cable to the QA6ADP, remove a sticker on the IN side connector. Sticker QA6ADP Extension base uni t Base cover IN side • To connect an extension cable to the OUT side connector of the QA6ADP, remove the portion (lid) under the characters "OUT" by tools such as a flathead screwdriver (5.5 75, 6 100). QA6ADP Extension base uni t Cutting one thin-walled part Flathead screwdriver Base cover OUT side

• Mitsubishi QA6ADP, 15 • Hold the connector part of an extension cable when connecting the extension cable to the QA6ADP. QA6ADP Extension base unit Connector Extension cable • Make sure to tighten fixing screws of the extension cable connector after connecting the extension cable. (Tightening torque: 0.20 Nm) QA6ADP Extension base unit Flathead screwdrive r Fixing screw (3) Disconnection of extension cable When disconnecting an extension cable, hold and pull the connector part of the extension cable after making sure that fixing screws have been completely removed.

• Mitsubishi QA6ADP, 16 6. PRECAUTION FOR USING QA6ADP 6.1 Current Consumption of QA6ADP Since 5VDC is supplied to the QA6ADP from the power supply module of the main base unit, take the current consumption of the QA6ADP into consideration when selecting the power supply module for the main base unit. n: Quantity of QA6ADP in system*1 Current consumption of I/O of A5 B Current consumption of QA6ADP n Current consumption of CPU and I/O of main base unit Current consumption of I/O of Q5 B *1The quantity of the QA6ADP includes the QA6ADP when the A6B is used. The follow

• 17 6.2 Voltage Drop of Extension Cable Since 5VDC is supplied to the QA6ADP from the power supply module mounted on the main base unit, the voltage drop will be caused in the extension cable. If the specified voltage (4.75VDC or more) is not supplied to the IN side connector of the QA6ADP+A5 B/A6 B, wrong input/output may occur. When using the QA6ADP, check that the IN side connect

• 18 7. COMPATIBLE MODELS LIST This chapter describes external dimensions of the QA6ADP. 200 (7.87) 73.5 (2.89) 130 (5.11) 74 (2.91) I/OPOWER I/OI/OI/OI/O QA6ADP QA conversion adapter module 2 6-M4 screw (for mounting module) Handle 4- 6mounting hole (M5 mounting screw) A series extension base unit that you have already had 9 (0.35) Power supply module, Extension cable 121

• Mitsubishi QA6ADP, Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi; damages to products other than Mitsubishi products; and to other duties. For safe use y This product has been manufactured as a general-purpose part for general industries, and has not been designed or manufactured to be in

Related Products and Documents (Car Stereo System):

Comparable Devices:

Similar Resources:

• Kenwood KCA-S220A - Car Audio Switcher (8 pages) © 2006-6 CREATED IN JAPANB53-0433-00 (N) 0SWITCHING UNITKCA-S220ASERVICE MANUALONAUXSWITCHAUX INOFFRLTO HEAD UNITTO UNIT 1TO UNIT 2Metallic cabinet(A01-4416-03)Cord with plug(E30-4276-15)Screw set(N99-1797-08)Magic tape(Not supplied)2mThis product uses Lead Free solder.This product complies with the RoHS directive for the European market. …

• Sony CDX-M620 - Fm/am Compact Disc Player (78 pages) 1Ver 1.0 2001. 03Model Name Using Similar Mechanism CDX-M700R/M750CD Drive Mechanism Type MG-383Z-121//KOptical Pick-up Name KSS-720ASERVICE MANUALUS ModelCDX-M620/M670AEP ModelUK ModelE ModelCDX-M670CDX-M620/M670• The tuner and CD sections have no adjustments.AUDIO POWER SPECIFICATIONS (US MODEL)POWER OUTPUT AND TOTAL HARMONIC DISTORTION23.2 watts per ch …

• Pioneer DEH-P4500MP (6 pages) Note:• This unit is for vehicles with a 12-volt battery andnegative grounding. Before installing it in a recre-ational vehicle, truck or bus, check the batteryvoltage.• To avoid shorts in the electrical system, be sure todisconnect the ≠ battery cable before beginninginstallation.• Refer to the owner’s manual for details on con-necting the power am …

• Pioneer TS-W304R (2 pages) TS-W304R TS-W254R         � …

• Philips CID3292 (3 pages) PhilipsCar infotainment systemCID3292Super clear display for video and navigationwith a high resolution LCDDrive in style with the Philips Car entertainment system CID3292. Featuring a 6.2" full color WVGA display with touch panel, built-in navigation system & Bluetooth® for calls and music streaming, the long road ahead just got more enjoyableEnr …

• Blaupunkt Essen CD33 (11 pages) Radio / CDEssen CD33Lausanne CD33Madeira CD33EinbauanleitungInstallation instructionsNotice de montageIstruzioni di installazioneInbouwhandleidingMonteringsanvisningInstrucciones de instalaciónInstruções de montagemMonteringsvejledninghttp://www.blaupunkt.com …

Comments, Questions and Opinions: