Manualios.com

Mitsubishi MZ360216EX Instruction Manual

Mitsubishi MZ360216EX Manual Online:

3.85, 644 votes
Mitsubishi MZ360216EX User Manual
Mitsubishi MZ360216EX User Guide
Mitsubishi MZ360216EX Online Manual

Text of Mitsubishi MZ360216EX User Guide:

  • Mitsubishi MZ360216EX, English | 29 READING: The unit is reading the data on the disc. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. PROTECT: The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. ➪ Wire or insulate the speaker cable properly and press the reset button. NA FILE: An Audio file is played with a format that this unit can’t support. ➪ --

  • Mitsubishi MZ360216EX, English | 25 Screwing the Faceplate on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below. Accessory5 • Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit.

  • Mitsubishi MZ360216EX, 16 | English Menu system Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound, select the "BEEP" display. 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "BEEP", each time you push the knob it alternates be

  • Mitsubishi MZ360216EX, 6 | English About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not conforming to the specification, may not play normally, or the file and folder names may not display correctly. Playable Audio file • MP3, WMA • Attach the correct extension for the Audio file (MP3: ".MP3", WMA: ".WMA") • Do not attach the extensions to files other than the Audio file. If the extension is attached, the file, which is not the Audio file, will play and outputs a loud noise,

  • Mitsubishi MZ360216EX, English | 13 Function of the KDC-MP4533/KDC-MP4033/KDC- MP4033S Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD CH" CD changer "MD CH" MD changer Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. • Disc 10 is displayed as "0". • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Playing CD & Audio file When a disc is inserted Press the

  • English | 15 Function of Audio file Folder Select Quickly selecting the folder you want to hear. 1 Enter Folder Select mode Press the [F.SEL] button. "FOLD SEL" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 2 Select the folder level Push the Control knob towards [FM] or

  • 26 | English Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed, remove the lower two locations. • The frame can be removed from the bottom side in the same manner

  • Mitsubishi MZ360216EX, 24 | English Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 26) and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. • During installation, do not use

  • Mitsubishi MZ360216EX, English | 3 Safety precautions About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functi

  • Mitsubishi MZ360216EX, 28 | English Audio file source ? Cannot play an Audio file. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 5). ? The sound skips when an Audio file is being played. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 5). ✔ The recording condition is bad. ☞ Record the media again or use another media. ? The Audio file track time isn’t displayed correctly. ✔ --- ☞ There are times when it isn’t displayed correctly according to the Audio file recording conditions. ? Supre

  • Mitsubishi MZ360216EX, English | 27 Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the same rating. ? There’s a source you can’t switch. ✔ There’s no media inserted. ☞ Set the media you want to listen to. If there’s no media in this unit, you can’t switch to eac

  • Mitsubishi MZ360216EX, English | 17 Function of the KDC-MP4533/KDC-MP4033/KDC- MP4033S In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. • When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Sele

  • Mitsubishi MZ360216EX, 12 | English Tuner features Station Preset Memory Putting a station in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good re

  • English | 11 Tuner features Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob towards [4] or

  • English | 9 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the ta

  • 22 | English Accessories/ Installation Procedure Accessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect

  • Mitsubishi MZ360216EX, 14 | English Track/File/Disc/Folder Repeat Replaying the song, disc in the Disc changer or Audio file folder you are listening to. Press the [REP] button. Each time you press the button, the Repeat Play alternates between the modes shown in the tables below. In CD & External disc source Repeat play Display Track Repeat "TRAC REP" Disc Repeat (In Disc Changer) "DISC REP" OFF "REP OFF" In Audio file Repeat play Display File Repeat "FILE REP" Folder Repeat "FOLD REP" OFF "REP OFF" Function of the KDC-MP45

  • Mitsubishi MZ360216EX, 20 | English Basic Operations of remote control Accessory of the KDC-MP4533/KDC-MP4033/KDC-MP4033S/KDC-MP333RC Loading and Replacing the battery Use two "AA"/ "R6"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. 2WARNING • Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed. • Do not set the remote control in hot places such a

  • Mitsubishi MZ360216EX, English | 7 General features Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Display Tuner "TUNER" CD "CD" External disc* (Optional accessory) "CD CH" Auxiliary input* (Optional accessory) "AUX EXT" Standby (Illumination only mode) "STANDBY" • * Function of the KDC-MP4533/MP4033/MP4033S. Volume Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the b

  • Mitsubishi MZ360216EX, English | 21 Audio Control [AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio Control> (page 8) for the operation method, such as the procedures for Audio control and others operations. In Tuner source [FM]/ [AM] buttons Selects the band. Each time you press the [FM] button, the band alternates between the FM1, FM2, and FM3 bands. [4]/ [¢] buttons Tune up or down band. [0] — [9] buttons Press buttons [1] — [6] to recall preset stations. In Disc sourc

  • Mitsubishi MZ360216EX, 2 | English Contents Safety precautions 3 Notes 4 About CDs 5 About MP3 and WMA 6 General features 7 Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Dimmer Control Theft Deterrent Faceplate TEL Mute Tuner features 11 Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting CD/Audio file/External disc control features 13 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Fold

  • Mitsubishi MZ360216EX, 8 | English General features System Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. When you press the button once, the current sound setting is displayed. Each time you press the button, the sound setting alternates. Sound setting Display Natural "NATURAL" Rock "ROCK" Pops "POPS" Easy "EASY" Top 40 "TOP40" Jazz "JAZZ" • Change each setting value with the <Speaker Setting> (page 9). First, select the speaker type with the Speaker setting. • Wh

  • Mitsubishi MZ360216EX, ANT. CONT MUTE P.CONT FRONT L FRONT R REAR L REAR R – + FRONT Connecting Wires to Terminals FM/AM antenna inputFuse (10A) To Kenwood disc changer/ External optional accessory (KDC-MP4533/MP4033/MP4033S only) Wiring harness (Accessory1) White/Black Gray/Black Green/Black Purple/Black White Gray Green Purple To front left speaker To front right speaker To rear right speaker To rear left speaker Ignition wire (Red) Battery wire (Yellow) Ground wire (Black) - (To car chassis) Ignition key switch Car fuse box (Main fuse) ACC Car fuse box Battery If no connections are made, do not let the wire come out from the tab. Depending on what antenna you are using, connect either to the

  • Mitsubishi MZ360216EX, English | 19 Function of the KDC-MP4533/KDC-MP4033/KDC- MP4033S Auxiliary Input Display Setting Selecting the display when alternating to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX EXT" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Auxiliary input display setting mode Push the Control knob towards [FM] or [AM]. Select the "NAME SET" display. 4 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The selected Aux

  • Mitsubishi MZ360216EX, 18 | English Menu system In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. Function of the KDC-MP4533/KDC-MP4033/KDC- MP4033S DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning p

  • Mitsubishi MZ360216EX, 4 | English Notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. • The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | ~ . • The illus

Related Products and Documents (CD Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Acer TravelMate 200 Service manual acer/travelmate-200-Z3H.pdf 13 Jan 2024 131
2 Q-See Premium QC5416-16E3-1 Specifications q-see/premium-qc5416-16e3-1-947.pdf 30 Jan 2023 2 0.9 Mb
3 Sony VGN-UX230P Specifications sony/vgn-ux230p-GXT.pdf 30 Oct 2023 2
4 Sony VGN-S660 Safety information manual sony/vgn-s660-728.pdf 08 Sep 2023 16
5 Indesit KP 59 MS.C (X)/G Installation and use manual indesit/kp-59-ms-c-x-g-3X9.pdf 19 Jun 2022 16
6 Ross RABD255/50/2.5 Instructions for installation, use and maintenance manual ross/rabd2555025-6KZ.pdf 26 May 2023 12

Similar Resources:

  • THOMSON

    DHD 4000

    (33 pages)
    User ManualDHD 4000DHD 4000ModelTHOMSON Sales UK Ltd30 Tower View - Kings HillWest Malling - Kent ME19 4NQEnglandhttp://www.thomson-europe.comDealer's address3573160A00 © Copyright THOMSON 2003Contents1 Introduction2 Safety Information3 Accessories3 Remote Control Handset5 Connections8 Basic OperationTurning on and off and changing channels9 Using the …
  • Lenoxx

    CD-149

    (20 pages)
    ®COMPCOMPCOMPCOMPCOMPACTACTACTACTACT DISC PLA DISC PLA DISC PLA DISC PLA DISC PLAYERYERYERYERYERAM/FM STEREO CASSETTE RECORDERAM/FM STEREO CASSETTE RECORDERAM/FM STEREO CASSETTE RECORDERAM/FM STEREO CASSETTE RECORDERAM/FM STEREO CASSETTE RECORDERWITH DETWITH DETWITH DETWITH DETWITH DETACHABLE SPEAKERSACHABLE SPEAKERSACHABLE SPEAKERSACHABLE SPEAKERSACHABLE S …
  • HQ Power

    VDSCD2000

    (44 pages)
    VDSCD2000 PROGRAMMABLE DUAL CD PLAYER PROGRAMMEERBARE DUBBELE CD-SPELER DOUBLE LECTEUR CD PROGRAMMABLE LECTOR DE CD DOBLE PROGRAMABLE PROGRAMMIERBARER DOPPEL-CD-PLAYER USER MANUAL GEBRUIKERSHANDLEIDING NOTICE D’EMPLOI MANUAL DEL USUARIO BEDIENUNGSANLEITUNG …
  • Pioneer

    PD-7050

    (30 pages)
    © <riw the sereicing these models, please refer to the following service ruiarsisai. o PD-7050/KU, KC, HEM, HB, SD types and PD-7050-S/HEM type; ARP1331 o PD-6050/KU, KC, HEM, HB, SD, SD/G types and PD-6050-S/HEM type; ARP1329 o PD-5050/HEM, HBtypesand PD-5050-S/HEM type;ARP1330 e PD-40S0/KU, KC, HEM, HB, HP, SD, SD/G types and PD-405G-S/HEM, HB types; A …
  • Onkyo

    DX-C380

    (17 pages)
    ONKYO DX-C380 Compact Disc Changer instruction manualhttp://www.manuallib.com/onkyo/dx-c380-compact-disc-changer-manual.htmlFrom ManualLib.comManualLib.com collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products.Home: http://www.manuallib.com/ Chinese: http://www.s …
  • Kenwood

    KDC-3025

    (30 pages)
    © 2003-11 PRINTED IN JAPANB53-0106-00 (N) 1029CD RECEIVERKDC-3025/325/5026/GSERVICE MANUALExcept KDC-5026GSIZE AA BATTERYPanel assy (A64-3190-02):KDC-5026G(A64-3191-02):KDC-5026Plastic cabinet assy(A02-1486-13)Lever(D10-4589-04) x2Screw set(N99-1730-15)DC cord(E30-6322-05)Screw set(N99-1719-05)Escutcheon(B07-3083-02):KDC-5026G(B07-3098-02):KDC-325/5026(B07- …

Comments, Questions and Opinions: