Manualios.com

Toa DT-930 UL Operating Instructions Manual

Toa DT-930 UL Manual Online:

3.25, 2234 votes
Toa DT-930 UL User Manual
Toa DT-930 UL User Guide
Toa DT-930 UL Online Manual

Text of Toa DT-930 UL User Guide:

  • Toa DT-930 UL, OPERATING INSTRUCTIONS AM/FM SYNTHESIZER TUNER DT-930 UL Thank you for purchasing TOA's AM/FM Synthesizer Tuner. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. 1. IMPORTANT SAFETY INSTRUCTIONS ....... 2 2. SAFETY PRECAUTIONS ........................... 2 3. INFORMATION TO THE USER .................. 3 4. GENERAL DESCRIPTION ......................... 3 5. NOMENCLATURE AND FUNCTIONS Front ............................................................ 4 Re

  • Toa DT-930 UL, 2 Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury. WARNING 1. IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Only use attachments/accessories specified by the manufacturer. 2. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to fol

  • Toa DT-930 UL, 3 When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock. • When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock. • When moving the unit, be sure to remove its power supply cord from the wall outlet. Moving the unit with the power cord connected to the outlet may cause damage to the power cord, resulting in fire or electric shock. When

  • Toa DT-930 UL, 4 5. NOMENCLATURE AND FUNCTIONS [Front] 1. Power switch Pressing this switch switches on the power, and pressing the switch again switches off the power. Note The receiving frequencies stored in memory are retained even when the power is turned off. 2. Power indicator Lights when the power is switched on. (Green) 3. Direct tuning key Pressing this key selects direct tuning mode. (Refer to p. 6.) 4. Memory key Stores the receiving frequency in memory. 5. Frequency/Channel selector key Selects either the receiving frequency or the preset channel. 6. Auto/Manual mode selector key Selects either auto or manual tuning mode. (Refer to p. 5.) 7. Tuning keys (UP/DOWN) Used to chan

  • Toa DT-930 UL, 5 6. RADIO RECEPTION The following three modes are available for receiving the desired frequency. (1) Auto tuning mode: Automatically detects and selects the frequency. (2) Manual tuning mode: The frequency is changed in specified steps, or recalled by changing the preset channel, and selected manually. (3) Direct tuning mode: The frequency is directly entered. [Keys used for operation] 6.1. Auto Tuning Mode Step 1. Press the AM/FM Band selector key to select either AM or FM broadcast. The selected band is displayed on the screen. Step 2. Press the Auto/Manua

  • Toa DT-930 UL, 6 6.2. Manual Tuning Mode Step 1. Press the AM/FM Band selector key to select either AM or FM broadcast. The selected band is displayed on the screen. Step 2. Press the Auto/Manual Mode selector key to select the Manual tuning mode. Extinguish the "AUTO" indication on the screen. Step 3. Press the Frequency/Channel selector key to select either the frequency or channel. When selecting the frequency, the "FREQ" indication is displayed on the screen. When selecting the channel, the "FREQ" indication extinguishes. Step 4. Press the Tuning key (U

  • 7 7. RECEIVING FREQUENCY MEMORY SETTINGS There are two methods for storing the receiving frequency in memory: manual memory preset and auto memory preset. The number of memory channels is 40 in total for AM and FM broadcasts. [Keys used for operation] 7.1. Manual Memory Preset Up to 40 AM and/or FM broadcasts can be freely assigned to CH01 through CH40 for preset mem

  • Toa DT-930 UL, 8 8. RECALLING THE PRESET FREQUENCY [Keys used for operation] Step 1. Press the AM/FM Band selector key to select either AM or FM broadcast. The selected band is displayed on the screen. Step 2. Press the Preset Memory Enter keys (0 – 9) to designate the desired receiving channel. (Example) • Selecting CH01: Press [0] and [1]. • Selecting CH10: Press [1] and [0]. Channel number AM/FM band selector key Preset memory enter keys LCD indicator AM/FM indication Cable holder Note Insert the AC adapter co

  • Toa DT-930 UL, 9 9.2.2. External antenna Use the optional AM Radio Antenna YA-410A as external antenna if satisfactory reception cannot be obtained. It is highly recommended that a long-wire antenna be installed outdoor when the unit is used in weak signal areas or inside ferroconcrete buildings. The long-wire antenna is capable of receiving weak radio signals that the supplied loop antenna cannot receive. Installing a long-wire antenna Connect the optional AM Radio Antenna YA-410A to the long-wire antenna using a PVC cable as illustrated below. The long-wire antenna can be installed by stringing a PVC cable of about 5 - 10 m. Notes • Instal

  • Toa DT-930 UL, 10 9.3. FM Antenna Connections 9.3.1. Dipole antenna Connect the supplied dipole antenna to the rear panel-mounted "FM 300 Ω" terminals. Note Stretch the antenna straight. Install it away from metal objects that can interfere with radio signals. 9.3.2. External antenna Connect an external antenna when the supplied dipole antenna cannot obtain good reception. When using a 300 Ω feeder cable for an external antenna, connect it to the "FM 300 Ω" terminals on the rear panel. Likewise, connect it to the "FM 75 Ω" terminals when using a 75 Ω coaxial cable. Tip Be sure to use a 75 Ω coaxial cable when installing the tuner in areas where radio signals are weak o

  • 11 DT-930 Note The rack mounting screws (5 x 12) are dedicated for the TOA equipment racks. Do not use them for other racks. Rack mounting screw 5 x 12 (supplied with the MB-15B) Fiber washer for M5 (supplied with the MB-15B) Tapping screw 3 x 14 (supplied with the MB-15B) MB-15B (optional) 10. RACK MOUNTING When mounting the unit on an equipment rack, use the

  • Toa DT-930 UL, 11. SPECIFICATIONS * 0 dB = 1 V Note: The design and specifications are subject to change without notice for improvement. • Accessories AC adapter .......................................................................... 1 AM loop antenna ................................................................. 1 FM dipole antenna ............................................................... 1 RCA stereo cord (1 m) ......................................................... 1 • Optional products AM radio antenna: YA-410A Rack mounting bracket: MB-15B Power Source 120 V AC, 60 Hz

Related Products and Documents (TV Tuner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony KF-E42A10 Service manual sony/kf-e42a10-JB5.pdf 18 Feb 2023 187
2 ZyXEL Communications P-660R-T3 V2 Release note zyxel-communications/p-660r-t3-v2-22W.pdf 16 Aug 2022 16 0.36 Mb
3 Gateway NV52L23U Buyer's manual gateway/nv52l23u-Z38.pdf 19 Jan 2023 3 0.45 Mb
4 NEC EliteMail VMP Operation & user’s manual nec/elitemail-vmp-436.pdf 14 Feb 2023 21
5 Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source apple/imac-all-in-one-desktop-3-06ghz-intel-core-2-duo-818.pdf 08 May 2023 377 9.55 Mb
6 BAPI Wireless Room Temperature and Humidity Transmitter Installation and operating instructions bapi/wireless-room-temperature-and-humidity-transmitter-16D.pdf 14 Dec 2022 5

Similar Resources:

  • Chord

    2go

    (28 pages)
    Chord ElectronicsProduct Communication | EnglishThe Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB. Great Britain.+44 (0) 1622 721 444info@chordelectronics.co.ukchordelectronics.co.uk2goManual-V.1.0 …
  • Toshiba

    BDX3500KU

    (2 pages)
    Unpack the box and check the components Quick Tour BDX3500KU/BDX5500KUQUICK STARTThe online User’s Guide contains important safety precautions not included in this document. Please review the safety precautions in this document and the online User’s Guide prior to using this product. Complete instructions are located on Toshiba’s web site at support.to …
  • Pioneer

    GEX-P5700TV

    (2 pages)
    EnglishThis manual describes analog TV tuner operation. If you are already using a Pioneer analog TV tuner, such as the GEX-P5700TV, read the TV tuner operation section. However, please read the important information below.Pioneer stopped selling analog TV tuners are no longer available in the U.S. in 2006, and analog TV tuners are also no longer available i …
  • Avermedia

    HD MCE A180

    (2 pages)
    ATSC Terrestrial Digital TV Tuner ► Watch and record free over-the-air Digital TV on your Desktop computer ► Windows® XP Media Center Edition 2005 certified ► Two in One ATSC TV tuner & Analog Video Caption Card ► TV Scheduler for schedule recording ► Parental Channel Lock-out AVerMedia AVerTV™HD MCE A180 Watch a …
  • Sony

    WRR-802A

    (64 pages)
    UHF SYNTHESIZED DIVERSITY TUNERWRR-802ASERVICE MANUALU Model1st EditionPrinted in JapanSony Corporation 1999. 6 11Broadcasting & Professional Systems Company ©1999WRR-802A (U) E9-976-876-01 …
  • SAFARI Montage

    Broadcaster

    (4 pages)
    Idea Guide SafariMontageBroadcasterDISDInstructionalTechnology  http://technology.duncanvilleisd.orgSeptember 25, 2015 Page|1 Equipment Setup TheiPadfitsinthecase.Thecaseattachestothetripod.Flash …

Comments, Questions and Opinions: