Toshiba IK-HD1E Instruction Manual

Text of Toshiba IK-HD1E User Guide:

• Toshiba IK-HD1E, 13 MeaningDisplay AWB OK Automatic white balance adjustment finished correctly. AWB NG LEVEL LOW Automatic white balance adjustment cannot be performed because the video level is too low. Adjust the video level by increasing the illumination or opening the lens iris. AWB NG LEVEL HIGH Automatic white balance adjustment cannot be performed because the video level is too high. Adjust the video level by decreasing the illumination or closing the lens iris. AWB NG C. TEMP LOW Automatic white balance adjustment c

• Toshiba IK-HD1E, 15 Due to the lens used or the environmental condition, color shading may occur at the upper and lower edge of the screen. If this happens, the shading correction function can be used to decrease the amount of color shading. For shading correction of the unit, SET (Automatic shading correction), MANUAL (Manual shading correction), and OFF (no shading correction) modes are provided. Select the mode on the OPTION menu. (Refer to the item “7.2 (7) (7.2) Changing shading correction mode”.) 㽲 SET(Auto shading) �

• Toshiba IK-HD1E, 16 Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set again when using the unit next time. When the setting is performed, select the menu of the item to be set. When the power turns on, the normal screen showing only the video signal appears. Change the output to each screen (video signal output, color bar screen, Index menu, menus, and

• Toshiba IK-HD1E, 2 SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, may result in property damag

• Toshiba IK-HD1E, 20 䋨 䋨䋨 䋨1䋮 䋮䋮 䋮2䋩 䋩䋩 䋩 Changing the setting in MANUAL mode Shutter mode AUTO, MANUAL, SS -- 1 SHUTTER -- <FILE A> Shutter speed setting MODE MANUAL OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, MANUAL 1 10000s 1/3000s, 1/5000s, 1/10000s, 1/30000s, 1/50000s < MODE = MANUAL> (a) Changing the shutter speed 㽲 Move the “㸢” to MANU by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons. 䌛DATA UP䌝 OFF 1/100s 1/125s 1/250s 1/500s 1/1000s 1/3000s 1/5000s 1/10000s 1/30000s 1

• Toshiba IK-HD1E, 24 䋨 䋨䋨 䋨3䋮 䋮䋮 䋮3䋩 䋩䋩 䋩 Changing gain in MANUAL mode White balance mode AWB, ATW, MANUAL Red gain adjustment -100 to 100 -- 3 WHT BAL -- <FILE A> Blue gain adjustment -100 to 100 MODE MANUAL R GAIN 0 Color temperature setting 3200K, 5600K B GAIN 0 C TEMP 3200k (1) Changing the red gain 㽲 Move the “㸢” to R GAIN by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select the desired value of red gain by pushing [DATA UP], [DATA DOWN] buttons. 䌛DATA UP䌝 Red is increased.

• Toshiba IK-HD1E, 25 䋨 䋨䋨 䋨4䋩 䋩䋩 䋩 PROCESS Gamma correction ON, OFF Gamma correction level setting -10 to 10 -- 4 PROCESS -- <FILE A> GAMMA ON/OFF ON GAMMA 0 Detail gain setting -7 to 7 DTL GAIN 0 Master pedestal setting -100 to 100 M PED 0 Digital noise reduction ON,OFF DNR OFF 䋨 䋨䋨 䋨4䋮 䋮䋮 䋮1䋩 䋩䋩 䋩 Changing gamma correction ON/OFF 㽲 Move the “㸢” to GAMMA ON/OFF by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons. Gamma correction ON, OFF -- 4 PROCESS -- <FILE A> Detail gain setting -7 t

• Toshiba IK-HD1E, 30 䋨 䋨䋨 䋨7䋮 䋮䋮 䋮5䋩 䋩䋩 䋩 Changing RS232C baud rate 䋨 䋨䋨 䋨7䋮 䋮䋮 䋮6䋩 䋩䋩 䋩 Changing OSD OUTPUT mode 㽲 Move the “㸢” to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select either 9600bps or 19200bps by pushing [DATA UP], [DATA DOWN] buttons. 䋨 䋨䋨 䋨7䋮 䋮䋮 䋮4䋩 䋩䋩 䋩 Changing RGB SYNC 㽲 Move the “㸢” to RGB SYNC by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select G, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons. * When Y/P b/Pr is selected at OUTPUT, RGB SYNC change cannot be performed. OUTPUT Y/Pb/Pr, RGB RGB SYNC G, ALL ON, ALL OFF

• Toshiba IK-HD1E, 11 㽲 Refer to the item “5. CONNECTION”, connect the equipment correctly. A camera head "IK-HD1H" needs to be connected to this camera control unit from this section on. 㽳 Turn on the connected equipment and the camera. 㽴 When using the camera for the first time and when replacing the camera cable and the camera head, be sure to perform the ABB adjustment, refer to the item “6.1 Automatic Black Balance”. 㽵 Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc.

• Toshiba IK-HD1E, 18 䋨 䋨䋨 䋨1䋮 䋮䋮 䋮1䋩 䋩䋩 䋩 Changing the setting in AUTO mode Shutter mode AUTO, MANUAL, SS Video level adjustment -100 to 100 Peak and average ratio adjustment 00 10 to 10 00 -- 1 SHUTTER -- <FILE A> Automatic shutter response speed adjustment 1 to 20 MODE AUTO LEVEL 0 Automatic shutter area selection PEAK AVE 05 05 PRESET A, PRESET B, PRESET C, PRESET D, PRESET E SPEED 10 AREA PRESET A < MODE = AUTO> Move up and down by pushing MENU UP,DOWN Select the desired value by pushing DATA UP,DOWN (a) Changing the video level in the automatic shutter mode

• Toshiba IK-HD1E, 10 DC IN 12V 1 +12V 2 +12V 3 GND 4 GND REMOTE 1 2 3 4 5 6 7 8 9 NC NC NC NC GND NC RXD TXD NC 5 3A Connector Pin Assignments 䊶 Only use optional camera head model # IK-HD1H with this camera controller. The use of another head may cause damage to the control unit and camera head. 䊶 When connecting the camera cables, be sure to turn off the camera control unit and any other equipment connected to it. 䊶 For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounded type AC adaptor with the specifications described below. Power supply volta

• 14 Five scene files (A, B, C, D, E) are available as user memories for this unit. These are chosen depending on shooting conditions. By using the [FILE] button, the camera operation is changed immediately from the currently selected Scene File to the next. (Refer to the item “7. MODE SETTING BY THE ON SCREEN DISPLAY”.) 䊶 While any menu is displayed, pressing the [FILE] button will

• 17 䊶 Select the menu to change the setting by referring to the item “7.1 Using the Menus”. 䊶 When the [MENU UP], [MENU DOWN] buttons are pushed, the “㸢” on the screen moves up and down. Move the “㸢” to the item whose setting you wish to change. 1 SHUTTER䋨 䋨 Electronic shutter 䋩 The electronic shutter has four modes; AUTO, MANUAL, SS(Synchro. S

• Toshiba IK-HD1E, 4 1 CAUTIONS ON USE AND INSTALLATION ............................................ 2 COMPONENTS ....................................................................................... 3 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY........................ 4 NAMES AND FUNCTIONS...................................................................... 5 CONNECTION........................................................................................ 5.1 Standard Connection .................................................................................................. 5.2 Cautions on

• Toshiba IK-HD1E, 12 ATW Automatic Tracking White Balance䋩 䋩䋩 䋩 AWB 䋨 䋨䋨 䋨䋨 䋨䋨 䋨Automatic White Balance䋩 䋩䋩 䋩 MANUAL 䋨 䋨䋨 䋨Manual White Balance䋩 䋩䋩 䋩 Outline The camera measures the object color temperature and adjusts the white balance automatically. Adjust white balance by displaying the white object inside the area set by AWB menu and pressing the [DATA UP] button. Adjust the white balance manually using the WHT BAL menu while shooting the white object. Features Tracks variations of color temperature and adjusts white balance automatically. Measurement accuracy is higher than ATW. This mode is effecti

• Toshiba IK-HD1E, 19 (d) Changing the automatic shutter zone area The available picture area is shown by the shading correction on the screen that is parted in 64. 㽲 Move the “㸢” to AREA by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select the measurement light area by pushing [DATA UP], [DATA DOWN] buttons. 䌛DATA UP䌝 PRESET A PRESET B PRESET C PRESET D PRESET E 䌛DATA DOWN䌝 PRESET A PRESET B PRESET D PRESET C PRESET E Note: These available picture areas are not displayed on the screen. IK-HD1E_EN.indd 19IK-HD1E_EN.indd 19 2007/11/20 9:33:172007/11/20 9:33:17

• Toshiba IK-HD1E, 31 When using the unit with an external sync signal to EXT. SYNC terminal on the rear panel. When the external sync signal is input, the camera automatically switches its sync from the internal sync to the external sync. EXT. SYNC input SYNC Operation External sync with SYNC 䋨 䋨䋨 䋨1䋩 䋩䋩 䋩 External sync signal input conditions SYNC 䋺 䋨75㱅 unbalanced䋩 7 3 External Sync 0.6 V (p-p) standard 2 External sync frequency range (59.94 Hz Setting) (50 Hz Setting) 3 Using the unit with external sync signal Adjust H (Horizontal) pha

• Toshiba IK-HD1E, 26 䋨 䋨䋨 䋨4䋮 䋮䋮 䋮3䋩 䋩䋩 䋩 Changing detail (outline) gain 㽲 Move the “㸢” to DTL GAIN by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select the desired value of the detail gain by pushing [DATA UP], [DATA DOWN] buttons. 䌛DATA UP䌝 The detail increases. 䋭7 0 7 The detail decreases. 䌛DATA DOWN䌝 䋨 䋨䋨 䋨4䋮 䋮䋮 䋮4䋩 䋩䋩 䋩 Changing master pedestal 㽲 Move the “㸢” to M. PED by pushing [MENU UP], [MENU DOWN] buttons. 㽳 Select the desired value of the master pedesta

• Toshiba IK-HD1E, 8 3 4 2 1 123 45 87 9 6 Camera cable for “IK-HD1H” terminal POWER switch POWER LED FILE button GAIN button DISP button PAGE button MENU UP (SHD) button MENU DOWN (SHD) button DATA UP (AWB) button DATA DOWN (ABB) button DC IN 12V terminal REMOTE terminal Y/G terminal P B /B terminal P R /R terminal EXT. SYNC terminal SYNC OUT terminal HD-SDI terminal KEY LOCK switch FORMAT switch 4. NAMES AND FUNCTIONS [Front] [Rear] 㽲 Camera cable for “IK-HD1H” terminal Where the camera cable for “IK-HD1H�

• Toshiba IK-HD1E, 27 䋨 䋨䋨 䋨5䋩 䋩䋩 䋩 MATRIX(Matrix color correction) Matrix color correction ON, OFF Red hue setting -- 5 MATRIX -- <FILE A> Yellow hue setting Red gain setting MATRIX ON Yellow gain setting Green hue setting R HUE 0 Ye HUE 0 Cyan hue setting R GAIN 0 Ye GAIN 0 Green gain setting G HUE 0 Cy HUE 0 Cyan gain setting G GAIN 0 Cy GAIN 0 Blue hue setting B HUE 0 Mg HUE 0 Magenta hue setting B GAIN 0 Mg GAIN 0 Blue gain setting Magenta gain setting 䋨 䋨䋨 䋨5䋮 䋮䋮 䋮1䋩 䋩䋩 䋩 Chan

• 3 Disclaimer We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the The following description is for that a camera head “IK-HD1H” connected to this camera control unit. user in any of the following cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether inten- tional or accidental; use under extrem

• Toshiba IK-HD1E, 22 䋨 䋨䋨 䋨3䋩 䋩䋩 䋩 WHT BAL(White Balance) The WHT BAL has three modes; AWB, ATW, MANUAL. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes : AWB, ATW, MANUAL. 㸢 䋨 䋨䋨 䋨3䋮 䋮䋮 䋮1䋩 䋩䋩 䋩 Changing the setting in AWB(Automatic White Balance) mode White balance mode setting AWB, ATW, MANUAL Color temperature setting 3200K, 5600K -- 3 WHT BAL -- <FILE A> R PAINT adjustment -10 to 10 MODE AWB C TEMP 3200K B PAINT adjust

• 21 2 GAIN (Video gain) GAIN has three modes; AUTO, MANUAL, OFF. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes : AUTO, MANUAL, OFF. In the OFF mode, gain is fixed to 0dB. 㸢 䋨 䋨䋨 䋨2䋮 䋮䋮 䋮1䋩 䋩䋩 䋩 Changing maximum gain in AUTO (Automatic gain control) mode -- 2 GAIN -- <FILE A> Gain mode AU

Related Products and Documents (Control Units):

Comparable Devices:

Similar Resources:

• Sea Tel DAC-2302 (34 pages) Sea Tel, Inc. 4030 Nelson Avenue Concord, CA 94520 Tel: (925) 798-7979 Fax: (925) 798-7986 Web: : www.cobham.com\seatel Sea Tel Europe Unit 1, Orion Industrial Centre Wide Lane, Swaythling Southampton, UK S0 18 2HJ Tel: 44 (0)23 80 671155 Fax: 44 (0)23 80 671166 Web: www.cobham.com\seatel Sea Tel Inc doing business as Cobham SATCOM April 21, 2011 D …

• Viessmann Vitodens 100-W (8 pages) 5602 997 GB 4/2012Dispose after installation.Installation instructionsfor contractorsVIESMANNReplacing the control unitfor the Vitodens 100-WSafety instructionsPlease follow these safety instructions closely to prevent accidents andmaterial losses.Safety instructions explained!Please noteThis symbol warns against therisk of material losses and envi-ronmental …

• Sony HDCU-950 (82 pages) HD CAMERA CONTROL UNITHDCU-950SD ENCODER UNITHKCU-951HD FRAME RATE CONVERTER UNITHKCU-953INSTALLATION AND MAINTENANCE MANUAL1st Edition (Revised 3)Serial No. 10001 and Higher : HDCU-950Serial No. 10001 and Higher : HKCU-951Serial No. 10001 and Higher : HKCU-953 …

• Viessmann Vitodens 100-W (44 pages) Operating instructionsfor the system userVIESMANNWall mounted gas boiler with black/white screenVITODENS 100-W/111-W/111-F/141-F6167584 GB 12/2020Please keep safe. …

• VARIZOOM VZ-STEALTH-LX (2 pages) VZ-STEALTH-LX OPERATING INSTRUCTIONS ***PLEASE READ BEFORE USING*** Thanks for purchasing our new deluxe miniature lens control, the Stealth-LX. Before you begin using your controller, there are a few important guidelines to follow: -DO NOT PLUG THE UNIT INTO ANY PANASONIC CAMERA OR DAMAGE MAY RESULT!!! -NEVER EXPOSE THE UNIT TO WATER OR LIQUIDS, AND …

• Siemens SINAMICS G120 (2 pages)  A5E31327192A ACSINAMICS G120Installation InstructionsLine FiltersFSD ... FSFWarningThis equipment contains dangerous voltages. The terminals can carry hazardous voltages even after the inverter has been switched off. After discon-necting the line supply, wait at least 5 minutes until the drive unit has dischar …

Comments, Questions and Opinions: