BEA Eagle 10 Operation & User’s Manual

Text of BEA Eagle 10 User Guide:

• BEA Eagle 10, 75.5185.04 20070727 Page 1 of 8 EAGLE USER GUIDE NOTE: For mounting heights between 10’ and 16’, use BEA model 10EAGLEHM (high mount). DESCRIPTION SPECIFICATION Frequency: 24.125 GHz Supply voltage: 12 to 24 V AC: ± 10%: 12 to 24 V DC: -10% / +30%: Mounting height: Normal: 7’; Maximum: 10’-0” Tilt angle: 0° to 90° vertical -15° to +15° lateral Detection area: Wide Narrow 13ft (W) x 6.5ft (D) 6.5ft (W) x 8.2ft (D) (supplied as optional) Minimum detection speed:

• BEA Eagle 10, 75.5185.04 20070727 Page 2 of 8 1 Tips 2 Safety Precautions • Shut off all power going to the header before attempting any wiring procedures. • Maintain a clean & safe environment when working in public areas. • Constantly be aware of pedestrian traffic around the door area. • Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door. • Always check placement of all wiring and components b

• BEA Eagle 10, 75.5185.04 20070727 Page 3 of 8 3 Mechanical Installation Opening the sensor  From behind, before installation  From the front, after installation Mounting the sensor  Paste the template at desired location.  Insert screws but do not screw them fully in.  Optional cable routing: Notch the cover as shown in the picture.  Drill as instructed.  Pass the cable w

• BEA Eagle 10, 75.5185.04 20070727 Page 4 of 8 5 Mechanical Adjustments A. THE WIDTH OF THE SENSING FIELD IS DETERMINED BY THE CHOICE OF THE PLANAR ANTENNA (OPTION)  Wide sensing field: 3-element antenna  Narrow sensing field: 6-element antenna SENSING FIELDS ACCORDING TO THE TYPE OF ANTENNA The sensing fields above correspond to the following adjustments

• 75.5185.04 20070727 Page 5 of 8 C. THE LATERAL POSITION OF THE SENSING FIELD IN FRONT OF THE DOOR IS DETERMINED BY THE LATERAL TILT ANGLE OF THE ANTENNA. The sensing fields on the right corr

• BEA Eagle 10, 75.5185.04 20070727 Page 6 of 8 6 Programming Guide The Eagle is equipped with a Motion Tracking Feature (MTF). The MTF is available when the Eagle is used in the uni- directional mode. The Eagle is factory preset with the MTF ON. MTF is recommended for use in short vestibule areas to help reduce unwanted door hold-open time. Refer to the Programming Guide to alter this setting. BEA recommends keeping the MTF enabled for all applications. The de

• 75.5185.04 20070727 Page 7 of 8 7 Manual Setup If a remote control is not available, only the sensitivity parameter can be adjusted manually, by means of the push buttons + (Plus) and - (Minus). Th

• BEA Eagle 10, 75.5185.04 20070727 Page 8 of 8 SYMPTOMS PROBABLE CAUSE CORRECTIVE ACTION The sensor power is off. Check the wiring and power supply. The door will not open and no red LED lights up. The door control is set to level 3. Set door control to automatic mode (level 1). The door opens and closes constantly. The sensor “sees” the door moving Increase the tilt angle and/or reduce the sensitivity and/or increase the immunity. When closing the door creates vibrations picked up by the s

Related Products and Documents (Security System):

Comparable Devices:

Similar Resources:

• Simplex 4100ES (2 pages) Features General description: Dual RS-232 port module with port B dedicated for master clock/master time interface RS-232 port A is available for connection to printers, terminals, or other compatible peripherals Allows the 4100ES Fire Control Panel system time to be synchronized with the building master time or other desired compatible time referen …

• Lorex VANTAGE LH110 ECO SERIES (3 pages) 1www.lorextechnology.comCopyright © 2011 Lorex Technology LH110 Series DVR: Frequently Asked QuestionsWhen connected to a VGA monitor, why can’t I see a mouse cursor, or access the system menus by using the front panel controls of the DVR?Solution 1You may have accidently switched the system output by pressing the 0 button on theremote; or the DVR did not …

• jablotron JA-82KRC-US (21 pages) Installation manual: OASiS security system JA-82KRC-US 1 / 21 MKH51400 JA-82KRC-US “OASiS” Control panel installation manual This manual is valid for control panel JA-82KRC-US. The control panel can be configured by a PC running OLink software. …

• Samsung SMT-190DN - Monitor + DVR (2 pages) SMT-190DNSMT-190DP19" LCD Built-in with DVR, 2 Weather Resistant Cameras,2 Night Vision CamerasSummaryThe SMT-190DN(P) system includes a 19" LCD with built-in DVRfeatures, 2 weather resistant cameras and 2 night vision cameras. Itenables 8 Channel video & audio Time-Lapse recording without anexternal recorder.FeaturesDimensions (unit:mm)• 19& …

• Menvier Security TS2500 (48 pages) TS2500Intruder Alarm Control PanelOperators Manual_~Engineers menu 2Select option :-_~OPEN_~Engineers menu 2Select option :-_~_~OPEN1ADCB237654890ENTESC_~SYSTEM OPEN17:30 01 JanSIL EN TZONE OMITCHIMENE W COD E 24 Hr OM ITWALKTESTBELLTESTPar t SetPar t SetPart SetRE SET1ABCD234567ENT ESC809Sett ing the Syst emEnter your pa sscode XXXXthen leave the protected …

• QOLSYS IQ PANEL (2 pages) IQ PANEL QUICK INSTALL GUIDESTEP 1: INSTALL THE HARDWARESTEP 2: CONNECT WI-FISTEP 5: PAIR SECURITY & LIFE SAFETY SENSORSSTEP 3: RUN A CELL TESTSTEP 6: PAIR Z-WAVE DEVICESIMPORTANTRemove retainer screw from panel topStep 1Pull back plate off gentlyStep 2Mount back plate to wallStep 3Hook panel stabilizer strap onto back plateStep 4 Step 5Connect batteryDO …

Comments, Questions and Opinions: