Toshiba dynadock U3.0 Operation & User’s Manual

Text of Toshiba dynadock U3.0 User Guide:

• 12 Introduction 5.375 x 8.375 ver 2.3 Quick Tour This section identifies the various components of the dynadock™. For a description of each component, please refer to the corresponding table that follows each illustration. Front view (Sample Illustration) Lights and connectors on the front of the dynadock™ Component Description Power light Glows blue when power is supplied v

• Toshiba dynadock U3.0, 21 Setting Up the dynadock™ and Connecting Peripherals The dynadock™ may not support VGA displays using Extended Display Identification Data (EDID). Connecting to the HDMI ® out port To connect a display to the HDMI ® out port on the dynadock™: 1 Plug one end of the HDMI ® cable (not included) into the HDMI ® in port on the HDMI ® display. 2 Plug the other end of the HDMI ® cable (not included) into the HDMI ® out port on the dynadock™. The DVI or HDMI ® cable provides digital communication between the display and computer, while the VGA cable provides analog communication. If your display has a DVI or HDMI ® p

• Toshiba dynadock U3.0, 16 Introduction 5.375 x 8.375 ver 2.3 Computer requirements Component Description CPU 1.6 GHz or higher processor (Intel ® Pentium ® /Celeron ® family, or AMD K6 ® /AMD Athlon™/AMD Duron™ family, or compatible processor recommended. Intel ® Core™ 2 Duo 1.4 GHz or higher processor recommended for optimal video performance.) Memory 1 GB memory or higher (2 GB or more recommended) USB interface USB 3.0 or 2.0 port. (3.0 recommended for optimal performance.) Disk space 50 MB of available disk space Operating system Microsoft ® Windows ® XP (32-bit edition) with SP2/SP3, or Microsoft ® Windows Vista ® (32-bit or 64-bit editions) w

• 37 Index DC-IN port 15 display modes Extended/Mirror mode 25 DisplayLink™ Manager Extend mode 26 DVI-I video port connecting to 20 dynadock™ assemble 19 environmental requirements 34 features 10 general specifications 35 physical dimensions 34 power requirements 34 setting up 17 supported display modes 26 dynadock™ U3.0 Install Menu 18 E environmenta

• Toshiba dynadock U3.0, 5 5.375 x 8.375 ver 2.3 Never place your product in a location with extremely low temperatures ❖ Never place your product in a location where it will be exposed to extremely low temperatures. This may result in a system failure, malfunction or loss of data. Never subject your product to sudden temperature variations ❖ Never subject your product to sudden temperature variations. This may result in condensation, causing a system failure, malfunction or loss of data. Never operate your product on AC power during a thunderstorm ❖ Never operate your product on AC power during a thunderstorm. If you see lightning or hear thunder, i

• Toshiba dynadock U3.0, 8 5.375 x 8.375 ver 2.3 Contents Safety icons ..............................................................2 Safety instructions ....................................................3 FCC information ........................................................5 Introduction................................................................................ 10 Overview .................................................................10 Features ............................................................10 Package

• Toshiba dynadock U3.0, 36 Index Numerics 3.5mm stereo lineout port 14 A AC power connection 19 adjusting audio settings 27 video settings 25 assemble dynadock™ 19 audio devices connecting 22 audio ports configuring 27 audio settings adjusting 27 B back view Quick Tour 14 C charging USB devices 30 computer requirements 16 CPU 16 disk space 16 Memory 16 operating system 16 USB interface 16 configuring audio ports 27 connect AC power 19 DC-IN 19 dynadock™ to computer 20 connecting audio devices 22 external displays to dynadock™ 20 peripherals 20 to a network 21 USB devices 23 connector USB Type B connector 15 contacting Toshiba 33 D DC-IN connect

• Toshiba dynadock U3.0, 18 Setting Up the dynadock™ and Connecting Peripherals 2 Click Install Driver. (Sample Image) dynadock™ U3.0 Install Menu The following programs are installed during the installation process: ❖ DisplayLink™ Core Software ❖ TOSHIBA USB Display Drivers 3 Follow the on-screen instructions to finish the installation. You will need to read and accept the TOSHIBA software license agreement when prompted, to proceed with the installation. 4 Restart your computer if prompted. Complete the software installation process before connecting the dynado

• 35 *Specifications are subject to change without further notice. General specifications Computer Interface USB 3.0 or 2.0 Ports and Connectors 2 x USB 3.0 ports and 2 x USB 2.0 ports in the back 2 x USB 3.0 ports in front ("USB Sleep and Charge" (up to DC 5V) with ( ) icon) 1 x Network Port (RJ-45 10 Base-T/100BASE-TX Ethernet Port) DVI-I x 1 (Digital

• Toshiba dynadock U3.0, 26 Using the dynadock™ and Adjusting Settings ❖ View large spreadsheets across two screens ❖ Multi-task more effectively without overlapping windows ❖ Compare two documents simultaneously across two screens ❖ View media on one screen and send messages on the other Mirror mode duplicates the image on your computer screen on an external display connected to the dynadock™. This mode is useful if, for example, you want to view information on a larger, external desktop display instead of a smaller, built-in computer screen. In Mirror mode, the dynadock™ automatically adjusts the external display’s resolution, colo

• 9 Contents 5.375 x 8.375 ver 2.3 Connecting your external displays ....................20 Connecting to a network ...................................21 Connecting audio devices .................................22 Connecting USB devices ...................................23 Chapter 2: Using the dynadock™ and Adjusting Settings ..... 24 Using the TOSHIBA dynadock™ U3.0

• Toshiba dynadock U3.0, 3 5.375 x 8.375 ver 2.3 Safety instructions Always read the safety instructions carefully: Do not disassemble, modify, tamper with or repair the product ❖ Do not attempt to disassemble, modify, tamper with or repair the product (including the AC adaptor). Disassembly, modification, tampering or repairing the product could cause fire or electric shock, possibly resulting in serious injury. Handling the AC adaptor and power cables/cords or plugs ❖ When handling the power cable/cord, follow these precautions:

• Toshiba dynadock U3.0, 38 Index dynadock™ 34 Q Quick Tour 12 back view 14 front view 12 S safety icons 2 instructions 3 security lock slot 15 setting up the dynadock™ 17 settings audio playback 28 audio recording 29 software install 17 specifications 34 standby/sleep/hibernation using 31 supported display modes dynadock™ 26 T TOSHIBA dynadock™ U3.0 Utility using 24 U USB 3.0 (USB Sleep and Charge port) 13 USB devices charging 30 connecting 23 using TOSHIBA dynadock™ U3.0 Utility 24 V video settings adjusting 25

• Toshiba dynadock U3.0, 23 Setting Up the dynadock™ and Connecting Peripherals output ports. (See “Adjusting audio settings” on page 27 for more information.) If there is no audio device connected to the dynadock™, the computer's audio ports may remain enabled. If you make any changes to your audio settings, audio ports and the dynadock, you may need to restart your media player for those changes to take effect. Connecting USB devices The dynadock™ provides four USB 3.0 ports and two USB 2.0 ports to connect peripheral devices to: two USB 3.0 ports and two USB 2.0 ports on the back and two USB 3.0 ports on the front. This section provides basic instructio

• 29 Using the dynadock™ and Adjusting Settings 2 Select Audio Setup from the menu. (Sample Image) 5.1 Channel surround sound function - Windows ® 3 On the Playback tab of the Windows ® sound settings dialog box, select dynadock Audio device. 4 Select Configure and select 5.1 Surround Speakers. Follow the on- screen instructions to complete the configuration (Sample Imag

• Toshiba dynadock U3.0, 11 Introduction 5.375 x 8.375 ver 2.3 ❖ Base ❖ USB 3.0 cable ❖ AC adaptor and power cord ❖ DVI-I to VGA adaptor ❖ Installation CD (User’s Guide (this document) and drivers) ❖ Standard limited warranty ❖ Quick Start Guide

• Toshiba dynadock U3.0, 2 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could resu

• Toshiba dynadock U3.0, 31 Using the dynadock™ and Adjusting Settings When there is a current overflow of the external USB device connected to the compatible port, USB bus power (DC 5V) supply may be stopped for safety reasons. To stop charging the USB device, disconnect the device from the dynadock™. Using standby/sleep/hibernation modes with the dynadock™ When your docked computer enters standby/sleep/hibernation mode, devices connected to the dynadock™ will not function until the computer returns to an active state. For example, if you are using the Ethernet port for high-speed network access, network access will

• Toshiba dynadock U3.0, 34 Appendix A Specifications Specifications This section summarizes the dynadock™ U3.0 technical specifications.* Physical dimensions Environmental requirements Power requirements Weight Approx. 530g/18.7 ounces (including the Base) Size 47(w) x 77(d) x 223(h) mm (1.8(w) x 3.0(d) x 8.8(h) in.) (not including the parts that extend beyond the main body) 113.8(w) x 130(d) x 235(h) mm (4.5(w) x 5.1(d) x 9.2(h) in.) (including the Base) Conditions Ambient temperature Relative humidity Operating 5 to 35 °C (41 to 95 °F) 20 to 80% Non-operating -20 to 55 °C (-4 to 131 °F) 10 to 95% Thermal Gradient 20 °C (68 °F) per hour maximum Wet-bulb Temperature 26 °C (78.8 °F

• Toshiba dynadock U3.0, 20 Setting Up the dynadock™ and Connecting Peripherals Connect the dynadock™ to your computer 1 Connect the square end of the provided USB cable into the USB type B connector on the back of the dynadock™. 2 Connect the other end of the USB cable to an available USB port on your computer. Windows ® automatically detects the device and installs appropriate device drivers. The dynadock™ should be connected to a USB 3.0 port for optimal performance. The dynadock™ will work when connected to a USB 2.0, but performance may be compromised. To disconnect the dynadock™ from your computer, directly unplug the cable from the computer. The computer is now undocked. If a USB storage

• Toshiba dynadock U3.0, 19 Setting Up the dynadock™ and Connecting Peripherals Assemble the dynadock™ Slide the dynadock™ onto the base as shown below. (Sample Illustration) Attaching the base to the dynadock™ Connect the power adaptor 1 Plug the AC adaptor into the DC-IN on the back of the dynadock™. (Sample Illustration) Connecting the AC adaptor to the dynadock™ 2 Connect the AC adaptor to a live electrical outlet. The power light on the front panel glows blue when the dynadock™ is powered ON.

• Toshiba dynadock U3.0, 22 Setting Up the dynadock™ and Connecting Peripherals opens the Local Area Connection Properties window, allowing you to configure the network settings as required according to your network environment. If you are unsure about the settings, consult your network administrator for assistance. The dynadock's Network port does not support Wake-up-on-LAN. The Local Area Connection icon in the system tray/notification area of your Windows ® desktop may not show a connection. Open "Network Connections" to view the Ethernet Connection status. Connecting audio devices T

• Toshiba dynadock U3.0, 6 5.375 x 8.375 ver 2.3 Contact Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. Copyright statement This guide is copyrighted by Toshiba Corporation with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein. ©2012 by Toshiba Corporation.

• Toshiba dynadock U3.0, 7 5.375 x 8.375 ver 2.3 Microsoft, Windows, Windows Vista and Windows 8 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other brands and product names are trademarks or registered trademarks of their respective companies.

• Toshiba dynadock U3.0, 4 5.375 x 8.375 ver 2.3 adaptor could cause fire or damage to the product, possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. Use correct power source ❖ Never plug the AC adaptor into a power source that does not correspond to both the voltage and the frequency specified on the regulatory label of the unit. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury. Only use approved power cables/cords ❖ Always use or purchase power cables/cords that comply with the legal voltage and frequency specifications and requirements in the country of use. Failure

• Toshiba dynadock U3.0, 14 Introduction 5.375 x 8.375 ver 2.3 Back view (Sample Illustration) Connections on the back of the dynadock™ Component Description 5.1 channel audio output ports Connection for audio equipment such as home stereo or speakers up to 5.1 surround sound. DC-IN USB 3.0 Type B connector USB 3.0 ports Security lock slot 5.1 Channel audio output port USB 2.0 ports Network port DVI-I video out port HDMI ® out port (side of dynadock™)

• Toshiba dynadock U3.0, 25 Using the dynadock™ and Adjusting Settings If you use multiple dynadocks with a single computer (for example, one at work and one at home), the video settings for each dynadock™ are saved when you disconnect the computer. This enables you to have each dynadock™ adjusted to different video settings for each location. The settings are retained each time you use the dynadock™ with your computer. Adjusting video settings This section describes detailed information on adjusting the video settings for a display connected to the dynadock™. Selecting Extended mode or Mirror mode You can choose to set the dynadock’s video output signal to Exten

More Instructions:

	Toshiba dynadock U3.0 Specifications 12-08-2023 2	DOWNLOAD
	Toshiba dynadock U3.0 Quick start manual 02-12-2022 102	DOWNLOAD

Related Products and Documents (Docking Station):

Comparable Devices:

Similar Resources:

• Rotaliana Diva (237 pages) 001Diva003021041061081101121139157175197215ItalianoEnglishDeutschFrançais EspañolNederlands DanskNorsk SvenskaРусский日本語한국어 Instruction Manualwww.rotaliana.it …

• Philips DS1100 (2 pages) Philips FidelioDocking speakerDS1100Obsessed with soundFill your bedroom with music and styleDelivering surprisingly full and rich sound, the compact docking speaker automatically synchronises with your iPhone/iPod's clock settings. Enjoy an adjustable night light and the convenience of charging a second mobile device via USB.Surprisingly rich sound� …

• Psion OMNII (2 pages) Version with ScannerVersion with pistol gripVersion without ScannerOPENLOCKOPENLOCKContents of the Boxfeaturesfront, right and LeftOmnii This Guide Additional Documentation(dependent on order)LEDsSpeakerVolume Rocker ButtonScan ButtonMicrophoneBeeperBattery Release ButtonVertical Scroll ButtonENTER Buttonexpansion BaCk CoverBattery Compartment getting start …

• SIIG JU-DK0311-S1 (20 pages) 1USB 3.0 Docking StationInstallation Guide04-0977AIntroductionThe USB 3.0 Docking Station is designed for acomputer with multiple connectivity needs.Key Features and Benefits• Expands connectivity to your UltraBook orHybrid tablet/laptop through a single USB3.0 port• Supports up to 5Gbps USB 3.0 data transfer rate• Interfaces: HDMI, VGA, Gigabit Ether …

• Gear4 AirZone 3 Series (66 pages) AirZone Series 3User ManualNotice d’utilisation | BenutzerhandbuchThank you for buying the AirZone Series 3, AirPlay speaker for iPod, iPhone and iPad. Please read this manual before use and retain it for future reference. Merci d’avoir choisi un haut-parleur AirZone Series 3 avec technologie AirPlay pour iPod, iPhone et iPad. Consultez ce manuel avant d …

• Dynex DX-IPD (4 pages) iPod® Docking StationStation d’accueil iPod®Estación de Acoplamiento iPod®D X -IPDUSER GUIDEGUIDE DE L’UTILISATEUR I GUÍA DEL USUARIOBox Contents• Docking station• AC power adapter • AV cable (5 feet)• Sync cable (6 feet)• S-Video cable (6 feet)• Universal dock adapter (8)Setting Up Connecting your iPod to the docking station1 Co …

Comments, Questions and Opinions: