Manualios.com

Olivetti d-Copia 20 Operation Manual

Olivetti d-Copia 20 Manual Online:

3.4, 1526 votes
Olivetti d-Copia 20 User Manual
Olivetti d-Copia 20 User Guide
Olivetti d-Copia 20 Online Manual

Text of Olivetti d-Copia 20 User Guide:

  • Olivetti d-Copia 20, CHAPTER 6 COPIER MANAGEMENT Copy management mode ● Turning copy management ON/OFF ● Turning printer manage- ment ON/OFF ● Turning print error report function ON/OFF Copy management mode content Turn copy management ON when required (to apply the settings made). Turn it OFF when not required. Turn ON to use the printer management for printing when using the printer function of this copier. Turn OFF when not using printer management. • This mode is not displayed when the copier is not equipped with the optional printer board. The print error report function prints the details of the error if an ID-code mismatc

  • CHAPTER 8 WHEN A PROBLEM OCCURS 8-4 2 3 1 2 1 2 3 Remove the misfed paper while taking care not to tear it. * If the paper should be torn, remove all the scraps from the inside the copier. Close the drawer slowly. * Check that the paper is kept under the claws of the drawer. If not, reload the paper. ● Misfeed in drawer left cover If the message "PAPER MISFEED. OPEN LEFT 2 (3) COVER.&q

  • Olivetti d-Copia 20, CAUTION! The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. VORSICHT! Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter auf dem Gerät sind nur Funktionsschalter und können nicht verwendet werden, um den Stromfluß im Gerät zu unterbrechen.

  • Olivetti d-Copia 20, 9-1 CHAPTER 9 CLEANING AND SPECIFICATIONS 1. Cleaning the copier CAUTION For safety purposes, ALWAYS remove the power plug from the outlet when performing cleaning operations. ● Cleaning the original cover Lift open the original cover. Wipe the back side of the original cover with a soft cloth dampened with alcohol or a mild detergent. * Never use thinner or other organic solvents for this purpose. ● Cleaning the platen Lift open the original cover. Wipe the platen with a soft cloth damp- ened with alcohol or a mild detergent. * Never use the thinner or other organic solvents for this purpose. * If soiling

  • Olivetti d-Copia 20, ■ Power supply/Grounding the copier WARNING • DO NOT use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. These types of situations present a danger of fire or electrical shock. ............................................... • Plug the power cord securely into the outlet. If metallic objects come in contact with the prongs on the plug, it may cause a fire or electric shock. ............................. • Always connect the copier to an outlet with a ground connection to avoid the danger of fire or electrical shoc

  • Olivetti d-Copia 20, CHAPTER 3 HOW TO LOAD PAPER 3-3 2 1 3 2 3 Adjust the insert guides to the size of the paper to be loaded. NOTE • When loading B4 or larger paper, pull out the support guide. Insert the paper along the guides as far as it will go. IMPORTANT • When loading paper into the multi-bypass, make sure that the copy side is facing downward. (The copy side is the side facing upward when the package is opened.) If the leading edge of the paper is curled, straighten it out before loading the paper in the multi-bypass. ● Setting the paper size for the multi-bypass By setting either the transparency mode or thick paper mode and the paper size for

  • Olivetti d-Copia 20, CHAPTER 3 HOW TO LOAD PAPER 3-6 6 7 8 9 10 11 Turn the toner cartridge release lever to the left as far as it will go. The new toner cartridge is now be locked. While holding the waste toner tank release lever 1 up, remove the waste toner tank. Close the opening of the waste toner tank with its seal. CAUTION Do not incinerate toner and toner containers. Dangerous sparks may cause burn. While holding the waste toner tank release lever up, fit the new waste toner tank into the copier. Gently pull the cleaning shaft as far as it will go and then push it back in. IMPORTANT • Do not pull the cleaning shaft with force or pull it out completely. Clo

  • Olivetti d-Copia 20, 1-1 Caution labels have been attached to the copier at the following locations for safety purposes. BE SUFFICIENTLY CAREFUL to avoid fire or electric shock when removing a paper jam or when replacing toner. CAUTION LABELS NOTE: DO NOT remove these labels. Label 2 High temperature inside. Do not touch parts in this area, because there is a danger of getting burned. ...................... Label 1 High voltage inside. NEVER touch parts in this area, because there is a danger of electric shock. ........................................... CHAPTER 1 IMPORTANT! PLEASE READ FIRST. Label 3 Do not incinerate toner and t

  • Olivetti d-Copia 20, CHAPTER 6 COPIER MANAGEMENT 2. Default settings The state the copier is in at the end of warm-up or after the Clear All key has been pressed is called “initial mode”. The functions and values that are automatically preset for the initial mode are called “default settings”. “COPY DEFAULT” and “MACHINE DEFAULT” are set in the default settings. They can be changed as desired to suit the copying needs. Copy default setting 1 EXPOSURE MODE 2 EXPOSURE STEPS 3 A.E. 4 MIX ORI.DENSITY 5 PHO ORI.DENSITY 6 TXT ORI.DENSITY 7 PAPER SELEC- TION 8 AMS MODE 9 COPY LIMIT 0 MARGIN WIDTH Content of copy default setting Selects the copy exposure mode at power-on from auto exposure mode (page

  • Olivetti d-Copia 20, CHAPTER 4 BASIC OPERATION When copying ends, press the Interrupt key again, and replace the newly copied original(s) with the one(s) removed before. Then, press the Start key. The interrupted copy job will be resumed. Interrupt copying is useful if, during one copy job, other originals need to be copied at different settings. The interrupted copy job can be resumed at the same settings as before after the rush job is finished. Press the Interrupt key to light the indicator. The “INTERRUPT MODE.” screen will appear. Remove the present original(s) and put it (them) aside. Set the new original(s) and execute copying. 3. Interrupt copying 4-6 1 2 3 4

  • Olivetti d-Copia 20, CHAPTER 5 FUNCTIONS (1) Page separation copies from book originals Facing two-page of a magazine, book or the like is divided down the middle and copied onto two separate sheets of paper. IMPORTANT • The available size of originals is limited to A3, A4R, and A5R, and paper size is limited to A4. (2) Page separation copies from two-sided originals Each face of a two-sided originals is copied onto a separate sheet of paper. Set the original(s). NOTE • When copying from a book, set the book as illustrated. Press the Duplex/Split Page key

  • Olivetti d-Copia 20, CHAPTER 5 FUNCTIONS Enter the number of copies and press the Start key. When using the DF, scans and copies originals one at a time. When setting the originals on the platen, go to the next step. Set the next original and press the Start key. NOTE • Repeat this operation for all originals. After all the originals have been scanned, press the enter key. Copying will start. Since copying is performed after memorizing multiple originals, copies can be sorted into the required number of sets even without an optional finisher. NOTE • If “ON” is set in

  • Other precautions • DO NOT place heavy objects on the copier or cause other damage to the copier. • DO NOT open the front cover, turn off the main switch, or pull out the power plug during copying. • During copying, some ozone is released, but the amount does not cause any ill effect to one's health. If, however, the copier is used over a long period of time

  • 5-1 CHAPTER 5 FUNCTIONS 1. Duplex copying from various originals [Duplex copy] Duplex copies can be made from two-page originals or one-sided originals with the optional duplex unit. IMPORTANT • Duplex copies cannot be made with the multi-bypass. (1) Duplex copying from two-sided originals A two-sided original is copied onto both the front and back side of t

  • Olivetti d-Copia 20, CHAPTER 5 FUNCTIONS Set the original(s). Press the Duplex/Split Page key to light the indicator. The function selection screen will appear. Make sure that “2-SIDED COPY” is selected and press the enter key. The duplex copy setting screen will appear. Press the cursor down key to select the duplex copy mode. Press the enter key. If “1-SIDED ORIG.> DUPLEX” was selected, go to the next step. If “DUPLEX ORIG.> DUPLEX” or “BOOK ORIGINAL” was selected, the message display will be changed to the “DUPLEX MODE.” screen. (3) Duplex copying from one-sided originals The one-sided original is copied on both s

  • Olivetti d-Copia 20, CHAPTER 6 COPIER MANAGEMENT 5PAPER TYPE (1ST to 4TH) Press the cursor down or up key to select the paper type. Press the enter key. NOTE • The setting procedure for the paper type is the same for Drawers 1, 2, 3 and 4. 6PAPER TYPE (BYPASS) Press the cursor down or up key to select the paper type. Press the enter key. 7SELECT EJECTOR OF FAX The optional fax board and job separator must be installed to perform this setting. If not, this setting will not be displayed. 3SPECIAL PAPER Press the cursor down or up key to select the paper feed drawer to be marked with ( * ). Press the cursor right or left key. The mark ( * ) will appear aside the paper feed d

  • Olivetti d-Copia 20, CHAPTER 5 FUNCTIONS Select whether to rotate the back side of the copy 180 de- gree or not. Press the enter key. The message display will be changed to the “DUPLEX MODE.” screen. Press the Start key. Scanning of the originals will start. When setting the original in the DF, copying will be performed. When setting the original on the platen, go to the next step. Replace the original and press the Start key. Scanning of the originals will start. Carry out the same procedures to the originals of which copying will be performed, and finally, press the enter key. Copying will start. 8 9 6 7 5-3

  • Olivetti d-Copia 20, CHAPTER 2 NAMES OF PARTS 2-2 1 Original cover <optional> (Open/close to set the original on the platen.) 2 Operation panel (Contains the keys and indicators for operating the copier.) 3 Left cover handle (Hold to open the left cover.) 4 Left cover (Open when a paper misfeed occurs.) 5 Multi-Bypass (Load paper here when copying onto small-size or special paper.) 6 Insert guides (Be sure to set the paper width when loading paper on the multi-bypass.) 7 Support tray (Operate to use large-size paper.) 8

  • CHAPTER 5 FUNCTIONS (2) 4-UP Use this mode to copy four originals onto one sheet. It can be used in conjunction with the duplex copy mode to copy eight originals onto one sheet, though this will require the optional duplex unit. (When setting originals on the platen, originals are arranged in the order from 1, 2, 3 and 4.) NOTE • In the “4-UP” mode, the available modes differ d

  • Olivetti d-Copia 20, CHAPTER 4 BASIC OPERATION 4-3 CAUTION If the copier will not be used for a short period of time (overnight, etc.), turn the main switch OFF (O). If it will not be used for an extended period of time (vacations, etc.), remove the power plug from the outlet for safety purposes during the time the copier is not in use. 9. At the end of copying Finished copies are ejected onto the copy store section. IMPORTANT • Up to 250 sheets can be stored. Note that the number of sheets that can be stored varies depending on the condition of the paper used. 9 7. Setting the number of copies Use th

  • Olivetti d-Copia 20, CHAPTER 6 COPIER MANAGEMENT Copy default setting !BORDER WIDTH @DEFAULT DRAWER #OUTPUT FORM $ROTATE SORT Content of copy default setting Sets the initial value of the border erase width for the sheet erase or book erase in the border erase mode (page 5-6). Specifies the paper feed drawer to be selected automatically when warm-up ends or when the Clear All key is pressed. Paper feed drawer 3 and 4 can be selected only when the optional drawer is installed. Sets whether or not to perform sort copying (page 5-9). Sets whether the normal sort copy (page 5-9) or rotate sort copy (page 5-9) is used when the sort mode is selected. • This setting

  • Olivetti d-Copia 20, CHAPTER 8 WHEN A PROBLEM OCCURS 1 8-3 2. When paper misfeeds If a paper misfeed occurs, copying will stop. A misfeed message will appear and the misfeed location will be indicated on the message display. Remove the misfed paper by referring to "(3) Removal procedures" with the main switch turned ON (|). (1) Misfeed location indicators 1 Misfeed in paper feed section 2 Misfeed in left cover (page 8-5) 3 Misfeed in DF <optional> (page 8-6) 4 Misfeed in duplex unit <optional> (page 8-6) 5 Misfeed in

Related Products and Documents (All in One Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 GE DZSR483GFGG Dimensions and installation information ge/dzsr483gfgg-B2G.pdf 15 Jul 2023 3 0.19 Mb
2 Amana ABR1922FES3 Cabinet parts amana/abr1922fes3-S9D.pdf 05 Aug 2023 15 1.06 Mb
3 EcoWater ETF2100PF10 Owner's manual ecowater/etf2100pf10-OSX.pdf 25 Jun 2022 24 0.73 Mb
4 Epygi QuadroCS Specifications epygi/quadrocs-L7A.pdf 04 Jan 2023 2 0.41 Mb
5 Yamaha KU100 Owner's manual yamaha/ku100-I6Z.pdf 22 Jan 2023 9 1.73 Mb
6 Asus E8316 Operation & user’s manual asus/e8316-118.pdf 01 Mar 2024 102 8.05 Mb

Similar Resources:

  • Lexmark

    MS510 Series

    (322 pages)
    MS510, MS610, M1145, & M3150Machine Type 4514-630, -635, -636, -638,-639, -649Service Manual• Start diagnostics• Maintenance• Safety and notices• Trademarks• IndexFebruary 04, 2013 www.lexmark.comP/N 12G2826 …
  • Brother

    MFC-7840W

    (151 pages)
    NETWORK USER’S GUIDEMulti-Protocol On-board Ethernet Multi-function Print Server and Wireless (IEEE 802.11b/g) Ethernet Multi-function Print ServerMFC-7840WPlease read this manual thoroughly before using this machine on your network. You can view this manual in HTML format from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick …
  • Kodak

    ESP 3 - 2

    (2 pages)
    OKStart HereCommencez iciComience aquí3546AABBABCDCLICK!CLIC!¡CLIC!8USBwww.kodak.com/go/aiodownloadsOR • OU • OFollow the online instructionsSuivez les instructions en ligneSiga las indicaciones en línea1All-in-One Printers SoftwareVersion12All-in-One Printers SoftwareVersion12AB2Choose connection typeChoisissez un type de connexionSeleccione el tipo …
  • Konica Minolta

    bizhub PRO950

    (324 pages)
    Print OperationsUser’s GuideUser’s Guide*9961095000**9961095000*Konica Minolta Business Solutions Europe GmbHEuropaallee 17 30855 Langenhagen • GermanyTel.: +49 (0) 511 74 04-0Fax: +49 (0) 511 74 10 50www.konicaminolta.eu© 2009 Konica MinoltaBusiness Solutions Europe GmbHAll rights reserved. Printed in Germany. …
  • HP

    LaserJet Enterprise M607n

    (430 pages)
    LaserJet Enterprise M607, M608, M609 LaserJet Enterprise MFP M631, M632, M633www.hp.com/support/ljM607www.hp.com/support/ljM608www.hp.com/support/ljM609www.hp.com/support/ljM631MFPwww.hp.com/support/ljM632MFPwww.hp.com/support/ljM633MFPTroubleshooting ManualFor printer part removal procedures and parts diagrams information, see the Repair Manual.M607n, M607d …
  • Epson

    XP-241

    (4 pages)
    Start Here2 Load paper, glossy or printable side up and short edge fi rst, against the right side of the rear paper feed slot.3 Slide the edge guide against the paper, but not too tightly, and fl ip the feeder guard back.5 Install softwareNote: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to o …

Comments, Questions and Opinions: