Onkyo CR-305FX Instruction Manual

Text of Onkyo CR-305FX User Guide:

• Onkyo CR-305FX, 9 TAPE CD TIMER ENTER + 10 7 8 9 0 4 5 6 2 3 1 CLOCK CALL CLEAR REPEAT MEM SLEEP RANDOM MUTING A.PRESENCE STANDBY/ ON INPUT TUNER PRESET R C - 617 S Connecting speaker systems Connecting a sub-woofer • The SUBWOOFER PRE OUT jack supplies the left and right mixed monaural signals to the sub-woofer. Connecting the AC power cord (mains lead) Connecting the AC power cord (mains lead) 1. Connect the AC power cord (mains lead) to the wall outlet (the mains). “– –:– –” appears on the display. 2. Press the STANDBY/ON button. N

• Onkyo CR-305FX, 13 Remote controller RC-617S TAPE CD TIMER ENTER + 10 7 8 9 0 4 5 6 2 3 1 CLOCK CALL CLEAR REPEAT MEM SLEEP RANDOM MUTING A.PRESENCE STANDBY/ ON INPUT TUNER PRESET R C - 617 S 1 2 3 4 5 6 7 8 9 10 11 12 For more information about buttons or knobs, refer to the pages listed in the brackets ( [ ] ) below. 1. STANDBY/ON button [9] Toggles between STANDBY and ON. 2. Number buttons [18, 24] Used to select CD tracks or desired preset station. 3. SLEEP button [31] Enables you to make the sleep time setting. 4. VOLUME (UP)/ (DOWN) buttons [16, 17] Enables you to increase or decrease the volume level. 5. TUNER PRESET buttons [24] Enables you to select the PRESET s

• Onkyo CR-305FX, 34 Specifications AMPLIFIER Power Output: 2 × 20 watts at 4 ohms 1 kHz DIN 2 × 17 watts at 6 ohms 1 kHz DIN 2 × 15 watts at 8 ohms 1 kHz DIN 2 × 20 watts min, RMS at 4 ohms 1 kHz no more than 1 % THD (FTC rating) 2 × 25 watts at 4 ohms EIAJ Dynamic Power: 2 × 24 watts at 4 ohms 2 × 18 watts at 8 ohms Total Harmonic Distortion: 0.2 % at 10 watts output IM Distortion: 0.2 % at 10 watts output Damping Factor: 25 at 8 ohms Sensitivity and Impedance: TAPE/CDR/MD IN : 150 mV, 50 kohms Frequency Response: 10 to 50,000 Hz : +0 / –3 dB Acoustic Presence: 1

• 3 1. Recording Copyright—Unless it's for personal use only, record- ing copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse—The AC fuse inside the unit is not user-serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth

• Onkyo CR-305FX, 24 MEMORY FM MODE CLEAR Listening to a stereo radio station When you tune in a stereo FM station, the STEREO indicator lights up if the signal is sufficiently strong. If the signal is weak, you can still listen to the station in mono mode. In this case, tune in as follows. 1. Press the FM MODE button. The MONO indicator lights up. 2. Select the station you would like to listen to using the TUN- ING/PRESET buttons. 1 2 1 2 Selecting preset stations Follow the procedure below to select a preset station stored in memory. 1. Selec

• Onkyo CR-305FX, Thank you for purchasing the Onkyo CD Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver. Please retain this manual for future reference. CD Receiver CR-305FX Instruction Manual Contents Before using Important Safety Instructions........... 2 Precautions ....................................... 3 Features ...........

• Onkyo CR-305FX, 10 Making antenna connections Assembling the AM loop antenna Assemble the loop antenna as shown in the illustration. Connecting the antenna cable 1. Press down the lever. 2. Insert the wire into the hole. 3. Release the lever to replace it. Insert into the hole. 12 3 Connecting the included antennas Connecting the FM indoor antenna The FM indoor antenna is for indoor use only. Extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion. If the

• Onkyo CR-305FX, 6 Audio equipment connections • Do not connect the AC power cord (mains lead) to the wall outlet (the mains) until you have completed all the other connections including the connections on page 7, and the speaker connections on page 8. • On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors . • Please refer t

• Onkyo CR-305FX, 8 Connecting speaker systems Connecting left and right speakers • The load impedance of each speaker must be at least 4 ohms. • Do not use unnecessarily long or extremely thin speaker cords. Otherwise, the DC resistance of the speaker cords may become too high, lowering the damping factor and causing the sound quality to deteriorate. • Do not connect the speaker cord to the L and R connectors at the same time and do not connect two or more speakers to the same speaker connectors. Connecting the speaker cords to the speaker connectors 1. Strip 12 mm from the end of each cord. 2. Twist the stripped end of the cord. Note To prevent damage to circuits neve

• Onkyo CR-305FX, 20 MEMORY MEM Playing a CD DISPLAY TUNING/PRESET STANDBY/ON MEMORY FM MODE CLEAR PHONES INPUT M A X M I N A C O U S T I C P R E S E N C E V O L U M E DISPLAY 1 2 3 MEMORY playback You can select and store track numbers (up to 20) in the desired playback order. 1. Press the MEMORY button while the CD is stopped. 2. Press the , buttons to select the first track you would like to play back, then press the MEMORY but- ton. • To select the next track to be played, repeat this step. 3. Press the button to start MEMORY playback. • When the unit finishes playing the track which number you stored last, playback stops. The track numbers stored in memory will be retained. Rem

• Onkyo CR-305FX, 26 Using the timer The CR-305FX features a Timer function that enables you to start playing or recording a specified component at a specified time. To use this function, you need to connect this unit to other components via REMOTE CONTROL jacks. Refer to “Connecting the remote control cables” and “What can you do with the other ONKYO components by connecting with an remote control cables?” on page 7 for more information on making the connections. The timer function can be performed only by using the re

• 16 Choosing the required source 1 3 Choosing the required source 1. Press the INPUT buttons or the INPUT buttons on the remote controller to select the desired source. Each time you press these buttons, the display changes as fol- lows. CD, CDR, TAPE, FM or AM 2. Start playing the source you selected in step 1. The example shown on the left indicates that you have selected the

• Onkyo CR-305FX, 28 Programming to play at a specified time The clock of this unit must be set correctly before programming the timer. Before using the timer for listening to or recording broadcast programs, you need to store the preset stations. (Refer to “Presetting your favorite stations” on page 23 for information how to preset stations.) 1. Press the TIMER button repeatedly until “WEEKDAY” or “WEEKEND” is displayed, and press the ENTER button. 2. Press the buttons to set the ON time, and press

• Onkyo CR-305FX, 29 Programming to record at a specified time REC mode of the Timer function enables you to record a specified source at a specified time. To perform timer recording, you need to use a stereo cassette tape deck that is made by ONKYO, featuring the mark. Make sure the unit and the recording component are correctly connected with the remote control cable before timer recording. (Refer to “Con- necting the remote control cables” on page 7.) 1. Press the TIMER button repeatedly until “REC” appears on the display, then press the ENTER button. 2. Press the buttons to select the day of the week when you would like to start recording, then press the ENTER button. You

• 22 Receiving stations Tuning the radio 1. Select FM or AM using the INPUT buttons or the IN- PUT buttons on the remote controller. 2. Press and hold the TUNING/PRESET buttons for about 0.5 seconds to change the frequency. The indoor antenna should be installed on a wall or other surface in the position which gives the best reception. For more informa- tion on how t

• Onkyo CR-305FX, 7 Audio equipment connections remote control cable (supplied with every ONKYO component that has connectors ex- cept for the amplifier and receiver) This unit (CR-305FX) Stereo cassette tape deck CD recorder Connecting the remote control cables If your other components are made by ONKYO and those components are equipped with connectors, you can control the - connected components with the supplied remote controller. • The unit must be connected in the system hookups for control opera

• Onkyo CR-305FX, 25 Receiving RDS (European models only) RDS reception is available only on the European models, and only in areas where RDS broadcasts are available. What is RDS? Many FM stations now transmit RDS signals which contain addi- tional information. RDS provides you with various services so that you can choose a station broadcasting your favorite categories of music or other information. The information below is available through the CR-305FX. PS: Program Service Name The RDS indicator lights up when an RDS station is received. N

• Onkyo CR-305FX, 33 Troubleshooting Trouble Cause Remedy See page The disc skips sounds. Track numbers cannot be stored when setting MEMORY playback. The disc is loaded in the disc tray, but playback will not begin. Search time (when moving to a specific track) is extremely long. • Vibrations are being transmitted to the unit. • The disc is severely scratched. • The disc is extremely dirty. • There is no disc inserted in the unit. • A track number not on the disc is being in- put. • The disc is inserted with the wrong side fac- ing

• Onkyo CR-305FX, 27 Changing the WEEKDAY and WEEKEND settings You can define or change which day is WEEKDAY or WEEKEND. You can also define the day as both WEEKDAY and WEEKEND in order to program two timer settings on the same day. The initial factory settings are: WEEKDAY : Monday - Friday WEEKEND : Saturday and Sunday 1. Press the TIMER button repeatedly until “DAY SET” ap- pears on the display, then press the ENTER button. 2. Press the buttons to select “WEEKEND” or “WEEK- DAY”. “END” or “DAY” flashes. 3. Press the ENTER button.

• Onkyo CR-305FX, 31 Sleep function The Sleep function can be performed only by using remote control- ler. The SLEEP timer automatically sets the entire system to Standby mode after a specified period of time. 1. Start playing something you would like to listen to. 2. Press the SLEEP button repeatedly to set the desired sleep time. The time value will decrease from 90 minutes to 10 minutes in steps of 10 minutes. After a specified period of time, the unit will be automatically placed in Standby mode. • To check the remaining t

• Onkyo CR-305FX, 30 6 Using the timer 6. Press the STANDBY/ON button on the remote controller to set the Standby mode. Notes • Since muting is automatically turned on when the timer is used to record, the sound cannot be heard during recording. To moni- tor recording, press the MUTING button on the remote control- ler to cancel muting. • Timer recording is activated once. After recording, the REC mode setting will be cancelled. STEREO TIMER REC Switching the timer ON/OFF You can switch the timer ON/OFF to cancel the timer setting, to enable the timer again, or to perform timer recording

• Onkyo CR-305FX, 19 Playing a CD RANDOM playback (remote controller only) All the tracks on the disc will be shuffled, then played back. To start RANDOM playback, press the RANDOM button while the CD is stopped, or press the RANDOM button during playback. • You can combine the RANDOM mode with the MEMORY mode. In this case, the programmed tracks are played back in random order. (Refer to “MEMORY playback” on page 20.) To cancel RANDOM playback, • press the RANDOM button again. The RANDOM indicator dis- appears

• 17 Muting / Listening with the headphones Listening with the headphones Connect the stereo headphones mini plug to the PHONES jack. The speakers will reproduce no sound while the headphones are con- nected. Tip • You can adjust the sound through the headphones as well as through the speakers. See “Adjusting the sound” on the previous page for operations. Muting the sound Pre

• Onkyo CR-305FX, 32 Troubleshooting If you have any problems with the unit, please check the troubleshooting table below first. For any problems not covered in the table, please consult your nearest ONKYO authorized service center. Trouble Cause Remedy See page The unit doesn't turn on. Sound is reproduced from neither left or right speaker. Sound is reproduced from only one speaker. No sound is reproduced when the (wake-up) timer operates. The remote controller doesn't op- erate. AM stations cannot be received. Buzzing noise on AM (part

• Onkyo CR-305FX, 2 PORTABLE CART WARNING S3125A 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat reg- isters, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or ground- ing-typ

• 23 MEMORY FM MODE CLEAR Presetting your favorite stations You can store your favorite stations in the preset memory. Follow the procedure below: 1. Select FM or AM using the INPUT buttons or the IN- PUT buttons on the remote controller. 2. Press and hold the TUNING/PRESET buttons for about 0.5 seconds to select the frequency of your favorite station. The indicato

• Onkyo CR-305FX, 15 Clock Call function Press the CLOCK CALL button to display the time, press again to cancel the time display. Note • If the time has not been set, “ADJUST” will flash on the display. In this case, press again the CLOCK CALL button, then set the clock. (Refer to “Setting the clock” on page 14.) CLOCK CALL Setting the clock TIMER ENTER CLOCK CALL Switching between the 24 hour and 12 hour display settings 1. Press the TIMER button repeatedly to display “24H/12H.” 2. Press the ENTER button. “24H” or “12H” flashes on the display. 3. Use the buttons to select 24H (24 hour display) or 12H (12 hour display). 4. Press the ENTER button to

• Onkyo CR-305FX, 14 3 4 ENTER 1 2 Setting the clock Setting the clock 1. Press the TIMER button until “ADJUST” is selected on the display, then press the ENTER button. The day of the week will flash on the display. 2. Press the buttons until the desired day of the week is selected, then press the ENTER button. The time will flash on the display. 3. Use the buttons to set the desired time. 4. Press the ENTER button. The clock will start operating. When you set the clock while the unit is in the standby mode, the present time will continue to be displayed. When you set the clo

• Onkyo CR-305FX, 4 ■ 2 × 20 watts min RMS at 4 ohms, 1 kHz no more than 1.0 % THD (FTC rating) ■ 2 × 20 watts at 4 ohms, 1 kHz, DIN ■ 2 × 25 watts at 4 ohms, EIAJ ■ 4-Ohm Drive capability ■ High-Grade Discrete Outputs Stage Circuits ■ Brushed Aluminium Front Panel ■ 4-step Acoustic Presence control ■ Optical Digital Output ■ Full-Function Remote Control ■ RDS (PS) (European models) ■ Subwoofer Preout ■ CDR and Tape Inputs/Outputs Features Memory Preservation This unit does not require memory preservation batteries. A built- in memory power back-up system preserves the contents of the mem

More Instructions:

Onkyo CR-305FX Service manual 06-09-2023 4

DOWNLOAD

Related Products and Documents (Car Stereo System):

Comparable Devices:

Similar Resources:

• JVC LVT1311-003A (62 pages) ENGLISHFRANÇAISCD/SD RECEIVERRECEPTEUR CD/SD For canceling the display demonstration, see page 9. Pour annuler la démonstration des affichages, référez-vous à la page 9.For installation and connections, refer to the separate manual.Pour l’installation et les raccordements, se référer au manuel séparé.INSTRUCTIONSMANUEL D’INSTRUCTIONSLVT1311-00 …

• Sony XR-C102 (4 pages) Parts for Installation and ConnectionsPièces de montage et de raccordementMontageteile und AnschlußzubehörComponenti per installazione e collegamentiThe numbers in the list are keyed to those in the instructions.Les numéros de la liste correspondent à ceux des instructions.Die Nummern in der Liste sind dieselben wie im Erläuterungstext.I numeri nella l …

• Pioneer DEH-P3950MP (7 pages) <KMMNX> <06H00000>DEH-P3950MPPrinted in China <YRD5081-A/U> ESThis product conforms to new cord colors.Los colores de los cables de este producto se conforman con un nuevo código de colores.As cores dos fios deste produto seguem um novopadrão de cores.u« l “UN'« «c¼ r−M¹Æ…b¹b'« „öÝô« Ê«INSTALLATION …

• Ground Zero GZTC 165.3 (4 pages) TITANIUM SERIES TITANIUM SERIES COMPONENT SPEAKER SYSTEM Anleitung / Owner´s manual GZTC 165.3 GZTC 165.3-ACT Spezifikationen / Specifications • Hochwertiges 3-Wege Komponentensystem (ACT: für Aktivbetrieb) • Klippel® optimiert • Hocheffiziente 3-Ohm Lautsprecher • Tief- und Mitteltöner Membrane mit 3D HQPP-Struktur • …

• Sony XS-GT1327A (1 pages) Speaker DesignThe Sony® XS-GT1327A 5.25” speakers use a classic coaxial design. The woofer cone is constructed from HOP/Aramid ber for smooth mid-range frequencies and the PEN tweeter delivers clear high frequncies. Power HandlingThe XS-GT1327A power handling is 150 Watts Max Power and 35 Watts Rated power. Specications© 2010 Sony Electronics Inc …

• Clarion DXZ645MP (5 pages) Clarion Dxz645mp Dxz646mp Car Stereo Player RepairManualDOWNLOAD HEREThis is a COMPLETE Workshop Service / Repair Manual for CLARION DXZ645MP DXZ646MP CDPLAYER. This pdf manual works under all PC based Windows operating systems and even Mac. Itprovides all technical repair information for rebuilding or maintaining your CLARION DXZ645MPDXZ646MP CD PLAYER. Thi …

Comments, Questions and Opinions: