Manualios.com

Onkyo SKC-340C Instruction Manual

Onkyo SKC-340C Manual Online:

4.35, 1428 votes
Onkyo SKC-340C User Manual
Onkyo SKC-340C User Guide
Onkyo SKC-340C Online Manual

Text of Onkyo SKC-340C User Guide:

  • Onkyo SKC-340C, 10 Front & Rear Panels —Continued A DIGITAL IN OPTICAL 1, 2 & COAXIAL These optical and coaxial jacks can be used to con- nect a CD or DVD player and other components with digital audio outputs. B COMPONENT VIDEO A DVD player, TV, or other component that sup- ports component video can be connected here. C AM ANTENNA These push terminals are for connecting an AM antenna. D FM ANTENNA This jack is for connecting an FM antenna. E MONITOR OUT The composite video output should be connected to a video input on your T

  • 30 Connecting Your Components —Continued Connecting a Satellite, Cable, Set-top Box, or Other Video Source YPB COMPONENT VIDEO OUT P R VIDEO OUT YPB COMPONENT VIDEO IN VIDEO IN P R AUDIO OUT LR COAXIAL OUT OPTICAL OUT B B A C C A a c b Satellite, cable, set-top box, etc. Step 1: Video Connection Connect your set-top box’s video output jack to the AV receiver’s VIDEO 2 IN jack and

  • Onkyo SKC-340C, 54 Advanced Setup —Continued The following table shows the display indicators for each supported digital signal format. Normally, the AV receiver detects the signal format auto- matically. However, if you experience either of the fol- lowing issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS: • If the beginnings of tracks from a PCM source are cut off, try setting the format to PCM. • If noise is produced when fast forwarding or reversing a DTS CD, try setting the format to DTS. When using progr

  • Onkyo SKC-340C, 18 Remote Controller —Continued TAPE mode is used to control an Onkyo cassette recorder connected to the AV receiver via . To set the remote controller to TAPE mode, press the [RECEIVER] REMOTE MODE button. For twin cassette decks, only deck B can be controlled. A Play [ ] button This button is used to start playback. B Stop [ ] button This button is used to stop playback. C Reverse Play [ ] button This button is used to start reverse playback. D Rewind & FF [ ]/[ ] buttons The Rewind [ ] button

  • Onkyo SKC-340C, 33 Connecting Your Components —Continued With (Remote Interactive), you can use the following special functions: ■ Auto Power On/Standby When you start playback on a component connected via , if the AV receiver is on Standby, it will automatically turn on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all compo- nents connected via will also go on Standby. ■ Direct Change When playback is started on a component connected via , the AV receiver automatically selects that component as the input source. If you

  • Onkyo SKC-340C, 53 Advanced Setup —Continued Crossover Frequency This setting only applies to the speakers that you speci- fied as Small in the “Speaker Configuration” on page 52. To get the best bass performance from your speaker sys- tem, you need to set the crossover frequency according to the size and frequency response of your speakers. Notes: •For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer. Double Bass With the Double Bass function, you can boost bass out- put by feeding bass sounds from the front

  • Onkyo SKC-340C, 5 Features HT-R340 AV Receiver • 100 W/channel into 6 ohms (FTC) • 100 W/channel into 6 ohms (DIN) • 120 W/channel into 6 ohms (JEITA) • Dolby *1 Digital and Dolby Pro Logic II • DTS and DTS Neo:6 *2 5.1 • Optimum Gain Volume Circuitry • Massive High Current Power Supply (H.C.P.S.) trans- former • CinemaFILTER • Non-Scaling Configuration • A-Form — Auto Format Sensing • OR-EQ (OptiResponse Equalizer) *3 function • 192 kHz/24-bit D/A converters •Powerful and highly accurate Analog Devices 32-bit DSP processing •3 digital inputs (2 optical,

  • 9 Front & Rear Panels —Continued J MEMORY button (39) This button is used when storing or deleting radio presets. K TUNING MODE button (38) This button is used to select the Auto or Manual tun- ing mode. L Arrow/TUNING/PRESET & ENTER buttons (48, 50–53) When the AM or FM input source is selected, the TUNING [ ] [ ] buttons are used to tune the tuner, and t

  • Onkyo SKC-340C, 43 Common Functions —Continued With this function, you can temporarily mute the output of the AV receiver. To unmute the AV receiver, press the remote control- ler’s [MUTING] button again, or adjust the volume. The output is unmuted and the MUTING indicator goes off. Muting is cancelled when the AV receiver is set to Standby. With the sleep timer, you can set the AV receiver so that it automatically turns off after a set period. To cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears. To check the

  • Onkyo SKC-340C, 57 Troubleshooting —Continued Can’t record? • On your recorder, make sure the correct input is selected. •To prevent signal loops and damage to the AV receiver, input signals are not fed through to outputs with the same name (e.g., TAPE IN to TAPE OUT, or VIDEO 1 IN to VIDEO 1 OUT). The sound changes when I connect my head- phones? • When a pair of headphones is connected, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, Direct. How do I change the language of a multiplex source? • Use the �

  • Onkyo SKC-340C, 23 Connecting Antenna —Continued If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft. •For best results, install the outdoor FM antenna well away from tall buildings, preferably with a clear line of sight to your local FM transmitter. • Outdoor antenna should be located away from pos

  • Onkyo SKC-340C, 19 Enjoying Home Theater You can use two sets of speakers with the AV receiver: speaker set A and speaker set B . Speaker set A should be used in your main listening room for up to 5.1-channel playback. *While speaker set B is on, speaker set A is reduced to 2.1-channel playback. Speaker set B can be used in another room and offers 2-channel stereo playback. Speaker Sets A and B Speaker set A Speaker set B Indicator Output On On Set A: 2.1 channels Set B: 2 channels Off Set A: 5.1 channels Off On Set B: 2 channels Off No sound A SPEAKERS B

  • Onkyo SKC-340C, 52 Advanced Setup —Continued Speaker Configuration This section explains how to specify your speaker con- figuration. For speakers with a cone diameter larger than 6-1/2 inches (16 cm), specify Large (full band) . For those with a smaller diameter, specify Small (default crossover 100 Hz) . The crossover frequency can be changed on page 53. 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. 2 Use the Up and Down [ ]/[ ] buttons to select “1. SP Config,” and then press the [ENTER] but- ton.

  • Onkyo SKC-340C, 27 Connecting Your Components —Continued COAXIAL OUT AUDIO OUT LR OPTICAL OUT FRONT LR SURROUND LR CENTERSUB WOOFER cc d d d d a b Step 2: Audio Connection If your DVD player has a coaxial digital audio output jack, connect it to the AV receiver’s DIGITAL IN COAX- IAL jack. You can enjoy Dolby and DTS listening modes with this connection. If your DVD player has an optical digital audio output jack instead of coaxial one, connect it to the AV receiver’s DIGITAL IN OPTICAL 1 or 2 jack, and set the DIGITAL INPUT assignment to OPT1 or OPT 2 (see page 35). Coaxial connections perform the same as optical ones. Optionally, connecting your DVD player’s audio out

  • Onkyo SKC-340C, 4 Precautions —Continued For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured bla

  • 14 Remote Controller —Continued To set the remote controller to DVD mode, press the [DVD] REMOTE MODE button. A ON/STANDBY button This button sets the DVD player to On or Standby. B Number buttons These buttons are used to enter title, chapter, and track numbers and to enter times for locating spe- cific points in time. C DISC +/– button This b

  • Onkyo SKC-340C, 25 Connecting Your Components —Continued By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver. The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your other components. Use the following sections as a guide. For video components, such as a DVD player, you must make two connections—one for audio, one for video. Video Connection Formats Video equipment can be connected to

  • Onkyo SKC-340C, 31 Connecting Your Components —Continued ■ CD Player or Turntable with Built-in Phono Preamp ■ Turntable (MM) with no Phono Preamp Built-in A phono preamp is necessary to connect a turntable that doesn’t have a phono preamp built-in. ■ Turntable with an MC (Moving Coil) Cartridge An MC head amp and phono preamp are necessary to connect a turntable with an MC (Moving Coil) cartridge. Connecting a CD Player or Turntable COAXIAL OUT OPTICAL OUT AUDIO OUT L R c b a Turntable

  • 16 Remote Controller —Continued To set the remote controller to MD or CDR mode, press the [MD] or [CDR] REMOTE MODE button. A ON/STANDBY button This button sets the MD/CD recorder to On or Standby. B Number buttons These buttons are used to enter track numbers and to enter times for locating specific points in time. The [+10] button is u

  • Onkyo SKC-340C, 26 Connecting Your Components —Continued Connecting a DVD Player YPB COMPONENT VIDEO OUT P R VIDEO OUT YPB COMPONENT VIDEO IN VIDEO IN P R A B B B A B Step 1: Video Connection (DVD Player to AV Receiver to TV) If your TV has component video input jacks, connect your DVD player to the AV receiver’s COMPONENT VIDEO DVD IN jacks. And connect the AV receiver’s COMPONENT VIDEO OUT jacks to your TV. This will provide better picture quality than connection . If your TV doesn’t have component video input jacks, connect your DVD player to the AV receiver

  • 3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal with- out the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care —Occasionally you should dust the unit all over with a soft cloth. For st

  • Onkyo SKC-340C, 51 Advanced Setup —Continued Speaker Levels With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position. Note: •A quicker way to adjust the speaker levels is to press the remote controller’s [TEST TONE] button to output the test tone, use the [LEVEL–] and [LEVEL+] but- tons to adjust the levels, and use the [CH SEL] button to select the speakers. • If the multichannel input is selected (page 37), in step 2, the “3. Mu

  • Onkyo SKC-340C, 29 Connecting Your Components —Continued Connecting a VCR for Recording AUDIO IN L R VIDEO IN A a Step 1: Video Connection Connect the AV receiver’s VIDEO 1 OUT jack to your VCR’s video input jack. Step 2: Audio Connection Connect the AV receiver’s VIDEO 1 OUT L/R jacks to your VCR’s audio input jacks. A a VCR, DVD recorder HT-R340 : Signal Flow Connecting a Camcorder, Games Console, or Other Device AUDIO OUT L R VIDEO IN VIDEO OUT a A Step 1: Video Connection Connect your camcorder’s video output jack to the AV receiver’s VIDEO 3 IN jack. Step 2: Audio Connection Connect your camcorder’s audio output jack to the AV receiver’s VIDEO 3 IN L/R

Related Products and Documents (Home Theater System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 EYC THS30X Series Operation manual eyc/ths30x-series-3TS.pdf 29 Jan 2023 65
2 Alarm.Com ADC-SVR122 Installation manual alarm-com/adc-svr122-CPX.pdf 29 Dec 2022 5
3 Sharp EL-250S Operation manual sharp/el-250s-3N4.pdf 11 Sep 2023 2 0.09 Mb
4 PPM ViaLiteHD HEA-xx-HB-4 series Operation & user’s manual ppm/vialitehd-hea-xx-hb-4-series-333.pdf 27 Jul 2022 28
5 NEC Promise SuperTrak EX8350 Operation & user’s manual nec/promise-supertrak-ex8350-BWZ.pdf 15 Aug 2022 65
6 CARVIN XDrive XD88 Operation manual carvin/xdrive-xd88-432.pdf 01 Jan 2023 17

Similar Resources:

  • Sony

    KDL-60NX801

    (24 pages)
    4-178-676-42(1)LCD Digital Color TVSetup Guide (Operating Instructions)Setting up your TVTo watch TVAdditional InformationSony Customer SupportU.S.A.: www.sony.com/tvsupportCanada: www.sony.ca/supportUnited States Canada1.800.222.SONY 1.877.899.SONYPlease Do Not Returnthe Product to the StoreKDL-60NX810 / 60NX801 / 60NX800 / 55NX811 / 55NX810 / 52NX800 / 46N …
  • LG

    BH7240B

    (2 pages)
    www.lg.com3D Blu-ray™ / DVD Home Cinema SystemBH7240B / BH7440P / BH7540TENGLISH | SIMPLE MANUALAn extended Owner’s Manual that contains information on the advanced features is located on the CD-ROM provided in an electronic version. To read these files, you will need to use a Personal Computer (PC) equipped with a CD-ROM drive. Some of the content in …
  • Sony

    BDV-E300 - Blu-ray Disc™ Player Home Theater System

    (2 pages)
    Main unit/ Unidad principalFRONT LFRONT RSUBWOOFERCENTERSUR LSUR R4-147-267-11(1)©2009 Sony Corporation Printed in Malaysia(1)Speaker and TV Connections/Conexiones del televisor y los altavocesConnect your TV/Conexión del televisorDepending on the jacks on your TV, select the video and audio connection method.En función de las tomas del televisor, selec …
  • Pioneer

    HTZ-370DV

    (95 pages)
    Operating InstructionsMode d’emploiHTZ-370DVDVD/CD ReceiverRécepteur-lecteur DVD/CDXV-DV370Speaker SystemEnceintes acoustiquesS-DV363Register your product at:http://www.pioneerelectronics.com (US)http://www.pioneerelectronics.ca (Canada)http://www.pioneerelectronics.com (US)http://www.pioneerelectronics.ca (Canada)• Protect your new investmentThe detail …
  • SNAP

    Violet3D

    (6 pages)
    SNAP Networks Private Limited. Regd. Office: 3597, 5th Cross, 13G Main, HAL 2nd Stage, Bangalore – 560 008, India R&D Office: #734, 1st Floor, 12th Cross, 22nd Main, J.P Nagar 2nd Phase, Bangalore – 560 078, India Phone/Fax: +91 80 2658 6459. Email: [email protected]. Web: www.snap-networks.com VIOLET3D-APP NOTE 4 Violet3D 5.1 Learning Proc …
  • Nyne

    NHT5.1RGB

    (14 pages)
    1Thank you for purchasing this product.Please read this manual carefully so you will know how to operate your product properly. If there are any technical questions, please contact:Customer care: (805) 751-4812 & Live chatOnline support: www.nyne.com/supportIMPORTANTPlease enter below the Serial No. which is located on the exterior of the product. Retain …

Comments, Questions and Opinions: