Oppo BDP-95AU Operation & User’s Manual

Text of Oppo BDP-95AU User Guide:

• SETUP MENU OPTIONS 53 Video Setup The “Video Setup” section of the Setup Menu system allows you to configure video output options. The menu items in this section are: Playback Setup Video Setup Audio Format Setup Audio Processing Device Setup Network Setup Exit Picture Adjustment Primary Output 3D Mode 3D TV Size TV Aspect Ratio TV System Output Resolution HDMI 1 Auto 46 16:9 Wide

• INSTALLATION 19 Connecting to a Display and Audio System using Dual HDMI HDMI IN HDMI Cable 1 HDMI Cable 2 Rear Panel AUDIO/VIDEO MULTI-CHANNEL RECEIVER HDMI IN Method 10 – Dual HDMI Connection BDP-95AU provides a Dual HDMI connection to make sure you can enjoy the highest possible video quality and resolution, in addition to the high bit rate audio content.

• Oppo BDP-95AU, SETUP MENU OPTIONS 68 Speaker Configuration applies to the multi-channel analog audio outputs only. All digital bitstream and LPCM outputs are unaffected by these settings. Down Mix Mode Down mix is the process of converting multi-channel audio to less number of channels. For example, converting a 5.1ch source to stereo, or converting a 7.1ch source to 5.1ch. Down mixing allows the audio output from the player to match the exact number of speakers available in your home theater. The current down mix mode is displayed in the lower right corner of the speaker placement illustration. To change the audio down mix setting, press the ENTER button whil

• Oppo BDP-95AU, BASIC OPERATIONS 29 2. Press the REV button on the remote control and the player starts fast reverse playback. Each press of the REV button switches the playback speed in the following sequence: 12 345 NOTE x Certain Blu-ray Discs utilizing the BD-Java technology may have their own fast forwarding and reversing control. The actual speed varies by disc, and a progress scale may be displayed by the disc. Pause and Frame-by-Frame PREV NEXT PLAY PAUSE 1. During playback, press the PAUSE button to temporarily pause the program. In this mode, a PAUSE icon will appear on the TV screen. 2. While a DVD or Blu-ray Disc is paused, press the PREV or NEXT button to reverse or advance

• Oppo BDP-95AU, INSTALLATION 13 Component Video Connection Component Video Cables Rear Pane l Y Pb/Cb Pr/Cr Audio Audio Cable Component Video Method 4 – Component Video Connection to TV If your TV has no digital video input but has component video inputs, please use a set of component video cables to connect the component video output of the player to the TV, and remember to set the “Primary Output” option in the setup menu to “Analog” (please see more details on page 53). The connectors are colour coded, so please make sure the cable connections match on both

• Oppo BDP-95AU, REFERENCES 81 Picture rolling or split picture Video system is not supported by the TV When playback is completely stopped, press and hold the P/N button or set the correct TV System in the Setup Menu. 34, 54 “No Disc” or “Unknown Disc” error No disc or incompatible disc loaded in player Eject disc and check. 28 Dirty disc recording surface Eject the disc and clean any dirt or fingerprints. 3 Disc not properly loaded Eject disc and make sure the label side is facing up and the record side is facing down. 28 Condensation on the Laser pick-up head Turn on the player, eject the disc and leave the player on for about an h

• Oppo BDP-95AU, SETUP MENU OPTIONS Picture Adjustment Menu for HDMI 2 & Analog To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the parameter, and use the LEFT/RIGHT ARROW buttons to change its value. To aid in the adjustment of picture control parameters, the picture adjustment menu will be reduced to only show the parameter being adjusted once you press the LEFT/RIGHT ARROW buttons (except the Picture Mode, which you will directly see the mode name switches between Mode

• Oppo BDP-95AU, 28 BASIC OPERATIONS Disc Playback POWER OPEN STOP PLAY 1ˊ Press the POWER button to turn on the player. 2ˊ Press the OPEN/CLOSE (OPEN) button to eject the disc tray. 3ˊ Place the disc with the label side facing up and the recorded side facing down. 4ˊ Press the OPEN/CLOSE (OPEN) button again to retract the tray. 5ˊ The player will read the disc information and starts playback. 6ˊ Depending on the content of the disc, a menu or navigation screen may appear. Please use the navigation ARROW and SELECT buttons to select the content to play. 7ˊ To stop playback, press the STOP button. 8ˊ

• SETUP MENU OPTIONS 61 Audio Format Setup The “Audio Format Setup” section of the Setup Menu system allows you to configure preferences for audio output formats. The menu items in this section are: Playback Setup Video Setup Audio Format Setup Audio Processing Device Setup Network Setup Exit Secondary Audio HDMI Audio Coaxial/Optical Output LPCM Rate Limit SACD

• Oppo BDP-95AU, INSTALLATION 9 Changing the Remote Code The remote control supports one of three remote codes. The default is “Code 1”. If you have other OPPO products placed close to the BDP-95 AU , they may inadvertently respond to the BDP-95AU remote control. In this case you can select a different remote code to avoid conflicts. To select a new remote code, open the battery compartment cover of the remote control, and then use a ball point pen to flip the switch to one of the positions marked as “1”, “2”, or “3”. Close the battery compartment cover. Make sure that the BDP-95AU player is turned on and the disc

• Oppo BDP-95AU, INSTALLATION 27 Select the Audio Setting The Blu-ray Disc format brings not only high resolution video, but also high bit rate audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio. Blu-ray Discs may also include additional audio features such as menu click sound and Secondary Audio Program (SAP – audio associated with the secondary video in Picture-in-Picture mode). Depending on the user preferences and other audio/video equipment connected to the player, the audio settings need to be adjusted to achieve the best result. The Easy Setup

• Oppo BDP-95AU, SETUP MENU OPTIONS 59 For HDMI 2 & Analog, the noise reduction level can be set between 0 and +3. The default is level 0. When user increases the level, the player adjusts the picture quality by applying mosquito noise reduction, random noise reduction and MPEG block noise reduction at the same time. The higher level user sets, the more aggressive noise reduction functions apply. The following picture adjustment controls are only available for HDMI 1 video output: 8. Colour Enhancement: To select the colour enhancement level on the video ou

• Oppo BDP-95AU, 72 4. XLR Terminal Polarity: To set the polarity of the BALANCED STEREO AUDIO OUT terminals on BDP-95AU. Please compare the positions of "hot" (positive) and "cold" (negative) pins on BDP- 95AU terminals (shown in the page 18) with those on your audio system. The available options are: Normal – The XLR three-pin positions on your audio system are the same as those on BDP-95AU terminals. Inversion – The positions of "hot" (positive) and "cold" (negative) pins on your audio system are switched comparing with those on BDP-95AU terminals. x x 5. Stereo Signal: To select the audio source that will

• Oppo BDP-95AU, SETUP MENU OPTIONS 49 The preceding diagram should give a good description of the various elements and their context. In this screen we could, for example, instruct you to set the Auto Play Mode parameter to Off in the Playback Setup section. To indicate where we were, you would see the following: Playback Setup > Auto Play Mode > Off. NOTE It is possible that some setup items are grayed-out and inaccessible. This can be caused by the disc still being played back or interlocking with mutually exclusive setup items. Please stop playback or eject the disc before trying to change these setup items. If you still cannot

• Oppo BDP-95AU, INSTALLATION 25 Press the UP/DOWN ARROW buttons to select the desired output resolution, then press the ENTER button. The player will apply the selected output resolution and ask you to confirm the selection. If your TV supports the selected resolution, you will see a dialog box with a count-down clock. Use the LEFT ARROW button to highlight the “OK” option and press the ENTER button to save the resolution setting. If your TV does not support the selected resolution, you may see a black screen or an error message. In this case please wait for 15 seconds and the Easy Setup screen will reappear. Select a different resolution that your TV can support. NOTE If you cann

• Oppo BDP-95AU, ADVANCED OPERATIONS 39 Repeat a Selected Section AB REPLAY To repeatedly play a specified section, please follow these steps: 1. During normal playback, press the AB REPLAY button on the remote at the desired beginning point (Point A) for the repeat play. The TV screen displays “A-”. 2. When playback reaches the desired ending point (Point B) for the repeat play, press the AB REPLAY button again. The player now repeatedly plays back the specified section (A-B). The TV screen displays “A-B”. 3. Press the AB REPLAY button for the third time to resume norma

• Oppo BDP-95AU, SETUP MENU OPTIONS 71 channel trim and compensate for speaker sensitivity differences. However, if your receiver does not have such functions (many receivers do not support channel trim for their multi-channel analog inputs), you may adjust channel trim through the player. For most accurate results, it is recommended that you use test tones from a calibration disc, such as Digital Video Essentials HD Basics, and a SPL (Sound Pressure Level) meter. The trim level can be set to +/- 10dB in 0.5dB increments. Other Audio Processing Settings In addition to Speaker Configuration, Crossover Frequency and Dynamic Range Control are audio processing settings that can be configured: 1. C

• Oppo BDP-95AU, SETUP MENU OPTIONS 65 Recommended Audio Format Options Depending on your specific audio/video connection method, the audio format options of the OPPO Blu-ray Disc Player may need to be adjusted to match your configuration. Please refer to the video and audio connection methods described previously in this guide and the following audio setup guidelines. Audio Connection Directly to TV If the player is connected directly to the TV through HDMI (as described in “Method 1” on page 10), through DVI and analog L/R audio cables (as described in “Method 3” on page 12), or through component video and

• Oppo BDP-95AU, 1 Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The excl

Related Products and Documents (Blu-ray Player):

Comparable Devices:

Similar Resources:

• LG BP325W (2 pages) If you want stunning Full HD 1080p and streaming entertainment, you’ve found it with the BP325 3D Blu-ray Disc™ Player. Experience Full HD 1080p picture quality, the sound of Blu-ray technology and LG Smart TV access to thousands of movies, TV shows and online videos.KEY FEATURES• 3D Blu-ray Disc™ & Blu-ray Disc™ Playback• DVD Playback• Wi- …

• Marantz BD8002 (40 pages) 1IntroducciónESPAÑOLESPAÑOLIntroducciónIntroducciónFunciones ................................................................................. 1Importante ............................................................................... 2Fuente de Alimentación .......................................................... 2Advertencia ....................... …

• LG BP240 (48 pages) www.lg.comPlease read this manual carefully before operating your set and retain it for future reference. BP240OWNER’S MANUALBlu-ray Disc™/DVD PlayerP/NO : MFL68023304 …

• LG BP250 (8 pages) Para ver las instrucciones de las características avanzadas, visite http://www.lg.com y luego descargue el Manual del Propietario. Algunos de los contenidos de este manual pueden ser diferentes de su aparato. Antes de operar su producto lea atentamente este manual de instrucciones.BP250MANUAL SIMPLEReproductor Blu-ray Disc™/DVD www.lg.com*mfl68819752*ES …

• Insignia NS-D160A14 (8 pages) INFORMATION IMPORTANTE Lecteur DVDNOUS SOMMES POUR L’ÉCOLOGIE!Le Guide de l’utilisateur n’est pas livré avec l’appareil mais est disponible en ligne.Allez sur le site www.insigniaproducts.com, cliquez sur Support & Service (Assistance et service). Saisissez le numéro de modèle dans le champ sous Manual, Firmware, Drivers & Product Inform …

• Panasonic DMP-BD55 - Blu-Ray Disc Player (8 pages) DMP-BD55 Blu-Ray Disc Player Firmware Installation Instructions Table of Contents Table of Contents ............................................................................................ 1 1 Firmware History............................................................................................. 2 1.1 Applicable Models ..................... …

Comments, Questions and Opinions: