Manualios.com

Optoma EX520 Operation & User’s Manual

Optoma EX520 Manual Online:

4, 1800 votes
Optoma EX520 User Manual
Optoma EX520 User Guide
Optoma EX520 Online Manual

Text of Optoma EX520 User Guide:

  • Optoma EX520, English 15 Powering On/Off the Projector Powering On the Projector 1. Remove the lens cover. 2. Connect the power cord to the projector. 3. Turn On the connected devices. 4. Ensure the Power LED is ashing and then press the power button to turn On the projector. The projector’s startup logo screen displays and connected devices are detected. If the connected device is a PC, press the appropriate keys on the computer keyboard to switch the display output to the projector. (Check the user manual of the PC

  • Optoma EX520, English 26 Image Display Mode There are many factory presets optimized for various types of images. 4 Presentation: Good color and brightness from PC input. 4 Bright: Maximum brightness from PC input. 4 Movie: For home theater. 4 sRGB: Standardised accurate color. 4 Blackboard: Tuned for blackboard usage. 4 Classroom: Recommended settings for classroom. 4 User1: User’s own settings. 4 User2: User’s own settings. The initial default settings of this mode is from Movie mode. Any further adjustments by the u

  • English 62 Compatibility Modes Computer Compatibility Signal Resolution Refresh Rate (Hz) NTSC - 60 PAL/SECAM - 50 VESA 640 x 350 70.1/ 85.1 640 x 400 70.1 / 85.1 720 x 350 70 720 x 400 70/ 85 720 x 576 50/ 60 VGA 640 x 480 60/ 67/ 72.8/ 75/ 85 SVGA 800 x 600 56.3/ 60.3/ 75/ 72.2/ 80/ 85.1 832 x 624 72/ 75 1024 x 576 50/ 60 XGA 1024 x 768 60/ 70.1/ 72/ 75/ 85 1152 x 864 60/ 70/ 75/85 HD720 1280 x

  • Optoma EX520, English 38 Setup | Security Change Password Use this submenu to change the security password for the projector. 1. Select Change Password from the Security submenu. The Conrm Change Password dialog box displays. 2. Select Yes. 3. Enter the default password <1> <2> <3> <4> <5>. A second password screen displays. 4. Enter the new password twice for verication. v If the incorrect password is entered three times, the device auto shutdowns after 10 seconds. v If the new

  • Optoma EX520, English 68 Ceiling Installation To prevent damage to your projector please use the recommended mounting package for installation. To ensure compliance, only use a UL Listed ceiling mount and screws that meet the following specications: 4 Screw Type: M4 4 Maximum screw length: 10 mm 4 Minimum screw length: 7.5 mm Refer to the following diagram to ceiling mount the projector. v Damage to the projector as a result of incorrect installation voids the warranty. v Ensure at least 10cm clearance between the ceiling and the underside of the projector. v Avoid locating

  • Optoma EX520, English 13 Connecting the Projector Connect to Computer / Notebook 1. Power Cord 2. Mini USB Cable (Optional) 3. S-Video Cable (Optional) 4. Composite Video Cable (Optional) 5. Audio-in (Optional RCA to 3.5mm jack cable) 6. Audio-out (Optional 3.5mm jack cable) 7. VGA 2 Cable 8. VGA 1 Cable 9. VGA Out Cable 10. HDMI Cable (Optional) 11. RS-232 Cable (Optional) v Due to the difference in applications for each country, some regions may have different accessories. Installation 3 4 2 6 7 8 9 10 5 11 1

  • English 18 Adjusting the Zoom / Focus (Zoom Series) You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.28 to 38.7 feet (1 to 11.8 meters). Use the keystone buttons to correct image distortion. They can be found on the remote control and on the projector’s control panel. .

  • Optoma EX520, English 21 Control Panel . Keystone + . Keystone - . Source Re-Sync . Enter/Help Menu AV-Mute PowerLampTemp Power Using the Control Panel ▲/Keystone+ (Up arrow) •Adjust the image Keystone positively. • Navigates and changes settings in the OSD. ◄/Source (Left arrow) • Press Source to select an input signal. • Navigates and changes settings in the OSD. Enter / Help Conrm your item selection./ Press to activate Help function (disabled in OSD menus). See page 51 Appendices for help function. ►/Re-Sync (Right arrow)

  • Optoma EX520, English 65 RS232 Protocol Function List RS232 Commands RS232 Command Table. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 0069:etaRduaB Data Bits: 8 enoN:ytiraP Stop Bits: 1 enoN:lortnoCwolF UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F Cable type used: Cross over 10=XX -99, projector's ID, XX=00 is for all projectors ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SEND to pro

  • Optoma EX520, English 61 Cleaning the Projector Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 4 Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could result in a severe burn. 4 Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on the projector. 4 If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated room for several hours before using. 4 If a lot of water gets into the projector interior when cleaning, have the pr

  • Optoma EX520, English 47 Options | Lamp Setting Lamp Reset After replacing the lamp, reset the lamp counter to accurately reect the new lamp’s life span. 1. Select Lamp Reset. A conrmation screen displays. 2. Select Yes to reset the lamp counter to zero. User Controls

  • Optoma EX520, English 34 Setup Signal Enter the Signal menu. Set projector signal properties. See page 36 for more information. Security Enter the Security menu. Access the projector’s security features. See page 37 for more information. Projector ID Select a two digit projector ID from 0 through 99. Audio Enter the Audio menu. Set audio level properties. See page 40 for more information. RS232 Allows RS232 control of an individual projector. Network (RJ45 model only) Allows LAN via web browser (Internet Explore) to contr

  • Optoma EX520, English 42 Setup | Advanced Logo Select the screen to display during startup. 4 Optoma—the supplied default startup screen. 4 User—customized screen capture using the Logo Capture function. Logo Capture Capture a displayed screen to use as the startup screen. 1. Display the desired screen on the projector. 2. Select Logo Capture from the Advanced menu. A conrmation screen displays. 3. Select OK. Screen capture in progress will display. When nished, Screen capture Succeeded will display. The captured screen is saved as User in the logo menu. Closed Captioning Select the screen to

  • Optoma EX520, English 22 Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on page 15. Laser Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. Four Directional Select Keys Use ▲▼◄► to select items or make adjustments to your selection. PC / Mouse control The PC/Mouse control can be used to control mouse movement. The mouse function is enabled using the USB cable to connect your computer and the projector. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this

  • Optoma EX520, English 37 Setup | Security Security Timer Enter the Security Timer sub menu. Enter the Months, Days, and hours that the projector can be used without entering the password. Exiting to the Setup menu activates the Security Timer. Once activated, the projector requires a password on the specied dates and times to allow power on and access to the security menu. If the projector is in use and the Security Timer is active, the following screen displays 60 seconds before the password

  • English 53 4 If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings. Example: [Fn]+[F4] Acer � [Fn]+[F5] Asus � [Fn]+[F8] Dell � [Fn]+[F8] Gateway � [Fn]+[F4] Mac Apple: System Preference � Display � Arrangement � Mirror display IBM/Lenovo � [Fn]+[F7] [Fn]+[

  • Optoma EX520, English 63 Signal Resolution Refresh Rate (Hz) 720 x 480 60 720 x 480i 60 720 x 480p 60 Apple Mac Compatibility Resolution Macbook Macbook Pro (Intel) Power Mac G5 Power Mac G4 Hz- Analog Analog Analog Analog 800x600 60 o o - - 800x600 72 o o o o 800x600 75 o o o o 800x600 85 o o o o 1024x768 60 o o o o 1024x768 70 o o o o 1024x768 75 o o o o 1024x768 85 o o o o 1280x720 60 o o o o 1280x720 75 o o - o 1280x720 85 o o - o 1280x768 60 o o - o 1280x768 75 o o o o 1280x768 85 o o - o 1280x800 60 o o o o 1280x1024 60 - o o o 1280x1024 75 - o o - 1680x1050 60 o o - - 1920x1200 60 o o - - Appendices

  • Optoma EX520, English 72 Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est co

  • Optoma EX520, English 10 Control Panel 1. Keystone + / ▲ 2. Enter / Help (See page 51 Appendices for help function.) 3. Temp LED 8. Menu 4. Lamp LED 9. Re-Sync / ► 5. Power LED 10. Keystone - / ▼ 6. Power 11. Source / ◄ 7. AV-Mute . Keystone + . Keystone - . Source Re-Sync . Enter/Help Menu AV-Mute PowerLampTemp Power 1 67891011 3 4 52 Introduction

  • Optoma EX520, English 8 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Fo cus Zo om Contrast Projector with lens cap Zoom Series/Fix Zoom Series IR Remote Control (with 2 x AAA Batteries) Power Cord 1.8m VGA Cable 1.8m USB Cable (Mini type) 1.8m (optional) Carrying Case (optional) RGB to Component Adapter (optional) SCART to RGB & S-Video Adapter (optional) Documentation: þ User’s Manual þ Warranty Card þ Quick Start C

  • Optoma EX520, English 3 Do not attempt to service this projector yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma to be referred to an authorized service center near you. 8. Do not let objects or liquids enter the projector as they may touch dangerous voltage points or short-out parts that could result in a re or electric shock. 9. See projector enclosure for safety related markings. 10. The projector should not be adjusted or repaired by anyone except properly qualied service personnel. Usage Notice

  • Optoma EX520, English 41 User Controls Setup | Network Network (RJ45 Models Only) Press Enter to apply Network settings. If the connection is successful, the OSD display will show the following dialogue box. 4 Network State—to display network information. 4 DHCP: On: Assign an IP address to the projector from the DHCP server automatically. Off: Assign an IP address manually. 4 IP Address—Select an IP address 4 Subnet Mask—Select subnet mask number. 4 Gateway—Select the default gateway of the network connected to the projector. 4 DNS—Select DNS number. 4 Apply—Press Enter to apply the selection.

  • Optoma EX520, English 48 LAN_RJ45 (RJ45 models only) For simplicity and ease of operation, the Optoma projector provides di- verse networking and remote management features. The LAN/RJ45 function of the projector through a network, such as re- motely manage: Power On/Off, Brightness and Contrast settings. Also, projector status information, such as: Video-Source, Sound-Mute, etc. LAN_RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). 2. On the PC (Laptop), select Start -> Control Panel-> Network Connections. User Controls v Projector connects to LAN, please use Ethernet Normal Cable. v Peer-to-peer (PC connec

  • English 27 Image Saturation Adjusts a video image from black and white to full color saturation. 4 Press ◄ to decrease the amount of saturation in the image. 4 Press ► to increase the amount of saturation in the image. Tint Adjusts the color balance of red and green. 4 Press ◄ to increase the amount of green in the image. 4 Press ► to increase the amount of

  • Optoma EX520, English 31 Display Format Use this function to choose your desired aspect ratio. 4 4:3: This format is for 4x3 input sources not enhanced for Wide screen TV. 4 16:9 I: This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen TV. 4 16:9 II: The non-standard wide-screen display format of the projector. Part of the original image will be cut if the image aspect ratio is less than 1.67:1. 4 Native: Depends on the resolution of the input source – No scaling is performed. 4 Auto: Automatically selects the appropriate format. User Controls

  • Optoma EX520, English 16 Powering Off the Projector 1. Press POWER to turn off the projector lamp, a message displays on the projector’s screen. 2. Press POWER again to conrm, otherwise the message disappears after 15 seconds. 3. The cooling fans continue to operate for about 10 seconds for cooling cycle . (If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press POWER to restart the projector.) 4. Turn off the main power switch. Disconnect the power cord from the electrical outlet and the projector. 5. Do not turn on the proje

  • Optoma EX520, English 58 Message Reminders 4 Replacing the lamp: 4 Out of range: (see the following for more information) Remote Control Problems If the remote control does not work 4 Check the operating angle for the remote control is approximately ±15°. 4 Make sure there are no obstructions between the remote control and the projector. Move to within 7m (23 ft) of the projector. 4 Make sure the batteries are inserted correctly. 4 Replace weak batteries in the remote control. Appendices

  • English 4 Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀■ Warning - Do not look into the projector’s lens when the lamp is on. The bright light may damage your eyes. ▀■ Warning - To reduce the risk of re or electric shock, do not expose this projector to rain or moisture. ▀■ Warning - Please do not open or dis

More Instructions:

DOWNLOAD

Related Products and Documents (Projector):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Zanussi 1231 1431 1431 1631 Instruction booklet zanussi/1231-1431-1431-1631-5W4.pdf 28 Nov 2022 28 0.55 Mb
2 Philips SBCHP1500/17 User manual manual philips/sbchp1500-17-349.pdf 14 Mar 2023 30 0.92 Mb
3 Celestron 52238 Instruction manual celestron/52238-6W5.pdf 10 Jan 2023 10 0.14 Mb
4 VTech Amplified Phone Operation & user’s manual vtech/amplified-phone-79K.pdf 26 Sep 2023 58 1.84 Mb
5 AirKing 9420 Operating instructions & parts manual airking/9420-48L.pdf 18 Jan 2023 2
6 Aiwa Z-A60 Service manual aiwa/z-a60-6O5.pdf 12 Oct 2023 56

Similar Resources:

  • Hitachi

    CP-WU8460

    (15 pages)
    1ProjectorCP-X8170/CP-WX8265/CP-WU8460User's Manual (detailed)Operating Guide – TechnicalResolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode720 x 40037.9 85.0 VESA TEXT640 x 480 31.5 59.9 VESA VGA (60Hz)640 x 480 37.9 72.8 VESA VGA (72Hz)640 x 480 37.5 75.0 VESA VGA (75Hz)640 x 480 43.3 85.0 VESA VGA (85Hz)800 x 600 35.2 56.3 VE …
  • Panasonic

    Presentation Solutions

    (2 pages)
    Congratulations on your recent purchase of a Panasonic Presentation Solutions Package. At Panasonic our aim is tomake things as easy as possible. Our state of the art technology and effective work tools make it easier to connectwith your audience. And with this complementary training session we will be able to provide you with tips to make aconfident stateme …
  • Sanyo

    PLC-XK2200 - 2200 Lumens

    (73 pages)
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-XK2200 PLC-XK2600 PLC-XK3010 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division …
  • Sharp

    AN-PH10EX

    (20 pages)
    Fixed wide lens for projectorFestes Weitwinkelobjektiv für ProjektorObjectif grand angle fixe pour projecteurObjetivo angular fijo para proyectorプロジェクター用短焦点固定レンズ OPERATION MANUALBEDIENUNGSANLEITUNGMODE D’EMPLOIMANUAL DE MANEJOAN-PH10EXEnglishDeutschFrançaisEspañolAN_PH10EX_Hyou01_04.p65 04.12.24, 3:03 PM1 …
  • ViewSonic

    PJ458D - XGA DLP Projector

    (44 pages)
    ViewSonic®Model No. : VS10872- User Guide- Guide de l’utilisateur- Bedienungsanleitung- Guía del usuario- Guia do usuário- Руководство пользователя- 使用手冊 (繁體)- 使用手冊 (簡體)- 사용자 안내서PJ458DDLP Projector …
  • Optoma

    W401

    (79 pages)
    1EnglishTable of Contents ............................1Usage Notice ...................................2Safety Information ...............................2Precautions .........................................3Eye Safety Warnings ..........................6Product Features ................................6Introduction ......................................7Pa …

Comments, Questions and Opinions: