Pioneer PDP-4330HD Operating Instructions Manual

Text of Pioneer PDP-4330HD User Guide:

• Pioneer PDP-4330HD, E-30 MENU Picture USER Advanced PureCinema [On] Off On Basic adjustment settings PureCinema Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. 1 Press MENU. 2 Press a/b to select “Picture”, and then press SET/ ENTER. 3 Press a/b to select “Advanced”, and then press SET/ENTER. 4 Press a/b to select “PureCinema”, and then press SET/ENTER. 5 Press a/b to select “On”, and then press SET/ ENTER. 6 Press MENU to exit the menu. A • Return to the previous menu by pressing MENU RETURN.

• Pioneer PDP-4330HD, E-5 Preparation Installing the Plasma Display Locating • Avoid the direct sunlight. Keep enough ventilation. • The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m (118 inch). • Because the Plasma Display is heavy, be sure to move it by more than two persons. L • If you place anything on top of the Media Receiver it will not receive enough ventilation and not operate properly. A • Keep enough space around the upper and back parts when installing in order to ensure ventilation around the backside. Using the optional PIONEER stand • For details on installation

• Pioneer PDP-4330HD, E-3 Features • New WIDE XGA Plasma Panel (H:1280 m V:768 pixels, PDP-5030HD) (H:1024 m V:768 pixels, PDP-4330HD) • Wide Viewing Angle • SRS and FOCUS Sound System* 1 • Dual TV Tuner • Picture and Picture, Still Image Function • 3-Language On Screen Display • 4 Video Input and PC (XGA) Input • Component Video Input and RGB Video Input • Parental Control System (V-CHIP) • Power-Saving Design

• Pioneer PDP-4330HD, E-27 Adjustments items for PC source Basic adjustment settings cbutton For less contrast For less brightness For less color intensity Skin tones become purplish For less sharpness Selected item Contrast Bright Color Tint Sharp Adjustments items for AV source MENU Picture USER Contrast Bright Red Green Blue Reset RETURN [+30] [0] [0] [0] [0] 0 –30 –30 –30 –30 +60 +30 +30 +30 +30 MENU Picture USER Contrast Bright Color Tint Sharp Advanced Reset RETURN [+30] [0] [0] [0] [0] 0 –30 –30 –30 –7 +40 +30 +30 +30 +7 A • Select “Advanced” and then press SET/ENTER to set “Color Temp

• Pioneer PDP-4330HD, E-42 Useful adjustment settings Option MENU Fine Sync. Audio Out RETURN [Fixed] Auto Sync. Auto Sync. Adjusting the image 32% Option MENU Fine Sync. H-Pos. V-Pos. Clock Phase Reset RETURN [0] [0] [0] [0] –90 –60 –90 –20 +90 +60 +90 +20 Fine Sync. adjustment (PC mode only) Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. 1 Press MENU. 2 Press a/b to select “Option”, and then press SET/ ENTER. 3 Press a/b to select “Fine Sync.”, and the

• Pioneer PDP-4330HD, E-22 Basic adjustment settings Moving the picture on the screen You can move the picture around on the screen. Press a/b/c/d to move an image on the screen to the desired position. A • While pressing a/b/c/d, an on-screen image, “Adjusting Position” displays to the desired position. • This setting cannot be stored. Once the System shuts down or enters standby mode, the setting is erased. To move the picture around the screen again, you must perform the above procedure again. • An on-screen image from a PC source cannot be moved

• Pioneer PDP-4330HD, E-55 FREEZE Picture and still image You can display two same-sized pictures when inputting from a AV source. 1 Press FREEZE. • A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE. 2 Update the still image by pressing SET/ENTER. • Each time you press SET/ENTER, the image on the right screen updates. 3 Press FREEZE to exit still image. A • This function does not work under the following input conditions: 1PC INPUT mode, 2Images from a high frequency signal source. • When this function is not available, “No still image display available.” will display. TV

• Pioneer PDP-4330HD, E-59 Useful features Cable control buttons When the Mode switch is set to CBL/SAT/DTV the cable converter connected to the display can operate using 1 to 5. Cable converters made by other manufacturers and not preset can also operate using the remote control unit if 1 to 5 have learned the functions. (See page 56.) 10 – 9 Press a button (or buttons) that corresponds to the channel that you want to watch. 2 CH k/l Press CH k or CHl to tune in a higher or lower channel. 3 SOURCE a Turns the cable converter power on and off. 4 CH ENTER * Fix the selected channel with the direct channel selection buttons. 5 CH RETURN * Press to switch between the cu

• E-10 Part names (GRAY) RS-232C IN OUT CONTROL AC INLET SYSTEM CABLE (WHITE) YP B P R S-VIDEO VIDEO R-AUDIO-L YP B P R S-VIDEO ANT/CABLE 75ΩOUT COMPONENT VIDEO COMPONENT VIDEO VIDEO R-AUDIO-L AB INPUT 1 INPUT 2 RGB INPUT INPUT 3 MONITOR OUTPUT POWER STANDBY/ON MEDIA RECEIVER PDP-R03U Front view CLEAR* POWER button INPUT 4 terminal (S-VIDEO) INPUT 4 terminal (VIDEO) PC INPUT terminal (AUDIO) IN

• Pioneer PDP-4330HD, E-21 Basic adjustment settings Page 33 First MENU MENU Energy Save Power Management Description Save power by decreasing picture brightness. System automatically shuts down if you set the time. Select Mode1 or Mode2. MENU Contrast Bright Red Green Blue Reset Description Adjusts the picture between light and shade. Adjusts picture brightness. Adjusts red color intensity. Adjusts green color intensity. Adjusts blue color intensity. All image adjustment settings return to the factory preset values. MENU Treble Bass Balance Reset Description Adjusts the treble weaker or stronger. Adjusts the bass weaker or stronger. Adjusts audio output between

• Pioneer PDP-4330HD, E-35 Using external equipment Option MENU Input Select INPUT1 [AUTO] AV-Y/C AUTO COMPONENT (GRAY) RS-232C IN OUT CONTROL AC INLET SYSTEM CABLE (WHITE) YP B P R S-VIDEO VIDEO R-AUDIO-L YP B P R S-VIDEO ANT/CABLE 75ΩOUT COMPONENT VIDEO COMPONENT VIDEO VIDEO R-AUDIO-L AB INPUT 1 INPUT 2 RGB INPUT INPUT 3 MONITOR OUTPUT Media Receiver (rear view) DVD player Component video cable (commercially available) INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 PC When using component video cable, select “COMPONENT” for “Input Select” in the menu. Watching a DVD image Connecting a DVD player You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment. Dis

• E-25 Basic adjustment settings Saving broadcast TV channels to memory 1 Press MENU. 2 Press a/b to select “Setup”, and then press SET/ ENTER. • Secret number setting menu displays only when “Secret No.” is set. (See page 52.) • Setup menu displays when the “Secret No.” is not set. Skip step 3. 3 Enter your 4-digit secret number with 0 – 9 to cancel the

• E-32 Basic adjustment settings MENU Power Control No Signal off [Disable] Disable Enable MENU Power Control No Operation off [Disable] Disable Enable Power Control Power Control setting allows you to reduce the display brightness to save energy. No Signal off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. 1 Press MENU. 2 Press

• Pioneer PDP-4330HD, E-48 Useful adjustment settings Parental control (setting V-CHIP level) V-CHIP is an electronic filtering device built into your System. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your Plasma Display. V-CHIP and Status will not be selectable from the menu if you do not first configure your secret number.(See page 52 for Sec

• Pioneer PDP-4330HD, E-44 Useful adjustment settings AV SELECTION: STANDARD AV SELECTION: DYNAMIC AV SELECTION: MOVIE AV SELECTION: GAME AV SELECTION: USER AV SELECTION: STANDARD AV SELECTION: USER Mode selection for INPUT 1 to 4 terminals Mode selection for the PC terminal Description For a highly defined image in a normally bright room For a clear-cut image emphasizing high contrast for sports viewing. For a movie Lowers image brightness for easier viewing Allows the user to customize settings as desired. You can set the mode for each input source. Selected item STANDARD DYNAMIC MOVIE GAME USER AV SELECTION AV SELECTION gives you five viewing options to choose from to best match

• Pioneer PDP-4330HD, E-54 Useful adjustment settings How to temporarily release the V-CHIP BLOCK • The V-CHIP BLOCK is working and censors a broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays. 1 Press SET/ENTER while the V-CHIP is working and then the secret number. setting menu displays. 2 Enter your 4-digit secret number with 0 – 9 and then press SET/ENTER. At this time V-CHIP BLOCK temporarily releases. Reactivating the temporarily released V-CHIP BLOCK • You can reactivate the temporarily released V-CHIP BLOCK as shown below. Method 1: Select Status setting (“On” or “Off”) from the Parental CTRL menu to reactivate BLOCK. Method 2: Select V-CHIP setting (“MPAA”, “TV Guideline

• Pioneer PDP-4330HD, E-11 Part names Remote control unit A • When using the remote control unit, point it at the Plasma Display. • See pages 56 to 63 for operating buttons not listed on this page. Set the mode switch to TV. 1TV a: Switch the Plasma Display power on or off. 2 FRONT SURR: Set SRS and FOCUS Sound System. 3 AV SELECTION: Select an audio or video setting. (AV mode: STANDARD, DYNAMIC, MOVIE, GAME, USER. PC mode: STANDARD, USER.) 4 SCREEN MODE: Select the screen size. 5 DISPLAY: Display the channel information. 6 SLEEP: Set the SLEEP timer. 7 CH RETURN: Return to the

• Pioneer PDP-4330HD, E-60 Useful features SAT control buttons When the SAT is preset by the learning remote control function, the remote control unit buttons will function as shown below. • When the Mode switch is set to CBL/SAT/DTV, satellite broadcast tuners made by other manufacturers and not preset can also operate with the remote control unit if 1 to 7 have learned the functions. (See page 56.) 10 – 9 Press a button (or buttons) that corresponds to the channel that you wish to watch. 2 SOURCE a Turns the Satellite broadcast tuner power on and off. 3 SET/ENTER, a/b/c/d SET/ENTER: Press to activa

• Pioneer PDP-4330HD, E-56 Useful features Learning remote control function You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the learning function for your remote control unit. This remote control unit has a function that can memorize each remote control code. Presetting manufacture codes 1 Slide the Mode switch to match the device to which you want to preset the remote control signal. 2 Press EDIT/LEARN and 1 at the same time. • LED flashes continuously. 3 Press 0 – 9 to e

• Pioneer PDP-4330HD, E-63 Useful features DVD/LD control buttons When the DVD/LD is preset by the learning remote control function, the remote control unit button will function as follows when the Mode switch of the remote control unit is set to DVD/LD. • When the input selector button having the same number as the input terminal connecting a DVD player or LD player is pressed, these players can operate using 1 to 11. (7 to 9 are for DVD players only.) • DVD/LD players made by other manufacturers and not preset can also operate using the remote control unit if 1 to 11 have l

• E-6 Preparation System cable Media Receiver (rear view) Power cord Plasma Display (rear view) Power cord System cable (bottom view) For details on optional PIONEER speaker installation refer to the speaker instruction manual provided. (GRAY)(WHITE) (GRAY) (WHITE) Setting the system 1. Connecting the system cable and the power cord to the Plasma Display 2. Connecting the sys

• Pioneer PDP-4330HD, E-36 Using external equipment (GRAY) RS-232C IN OUT CONTROL AC INLET SYSTEM CABLE (WHITE) YP B P R S-VIDEO VIDEO R-AUDIO-L YP B P R S-VIDEO ANT/CABLE 75ΩOUT COMPONENT VIDEO COMPONENT VIDEO VIDEO R-AUDIO-L AB INPUT 1 INPUT 2 RGB INPUT INPUT 3 MONITOR OUTPUT Media Receiver (rear view) VCR INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 PC AV cable (commercially available) Watching a VCR image Connecting a VCR You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment. Displaying a VCR image When connecting to the INPUT 2 terminals, select “IN

• Pioneer PDP-4330HD, E-15 Watching TV Language menu Antenna menu 1. Setting a language 1 Press a/b to select the desired language listed on the screen. 2 Press SET/ENTER to enter the setting. 2. Setting the antenna mode 1 Press a/b to select “Air” or “Cable” on the screen. 2 Press SET/ENTER to enter the setting. Searching TV channels CH Search Air 2 Initial auto installation When you turn on the Plasma Display System for the first time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV a. 1. Insert the batteries into the remote control unit. (See page 8.) 2. Connect the antenna cable to the Media

• Pioneer PDP-4330HD, E-23 Basic adjustment settings Language English Français Español Secret number setting menu Setup MENU Secret No. ––– – Setup menu Setup MENU Auto Installation CH Setup Parental CTRL RETURN Language menu Auto installation You can run auto installation again, even after setting up the preset channels. Language setting Select from among 3 languages: English, French and Spanish. 1 Press MENU. 2 Press a/b to select “Setup”, and then press SET/ ENTER. • Secret number setting menu displays only when “Secret No.” is set. (See page

• E-33 MENU Power Control Power Management [Off] Off Mode2 Mode1 MENU Power Control Energy Save [Standard] Standard Save Basic adjustment settings Power Management When set, the power will automatically shut down. 1 Press MENU. 2 Press a/b to select “Power Control”, and then press SET/ENTER. 3 Press a/b to select “Power Management”, and then press SET/ENTER. 4 Press a

• Pioneer PDP-4330HD, E-13 AC INLET (GRAY) RS-232C IN OUT CONTROL AC INLET SYSTEM CABLE (WHITE) YP B P R S-VIDEO VIDEO R-AUDIO-L YP B P R S-VIDEO ANT/CABLE 75ΩOUT COMPONENT VIDEO COMPONENT VIDEO VIDEO R-AUDIO-L AB INPUT 1 INPUT 2 RGB INPUT INPUT 3 MONITOR OUTPUT AC INLET Power cord Power cord Connecting the power cord Connect the power cord after all component connections have been completed. Watching TV Plasma Display (bottom view) Media Receiver (rear view) L • Use only the power cord provided. • Do not use a powe

• Pioneer PDP-4330HD, E-37 Using external equipment Option MENU Input Select INPUT3 [AUTO] AV-Y/C RGB AUTO COMPONENT INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 PC (GRAY) RS-232C IN OUT CONTROL AC INLET SYSTEM CABLE (WHITE) YP B P R S-VIDEO VIDEO R-AUDIO-L YP B P R S-VIDEO ANT/CABLE 75ΩOUT COMPONENT VIDEO COMPONENT VIDEO VIDEO R-AUDIO-L AB INPUT 1 INPUT 2 RGB INPUT INPUT 3 MONITOR OUTPUT Media Receiver (rear view) Digital tuner Watching broadcasts via a Digital tuner Connecting a Digital tuner You can use the INPUT 3 terminal when connecting a Digital tuner and other audiovisual equipment. Displaying broadcasts via a Digital tuner When connecting to the I

• Pioneer PDP-4330HD, E-40 Using external equipment Media Receiver (rear view) Control cord connection When connecting control cords to the Media Receiver form other remote controlled PIONEER components bearing the t logo, remote control operations are performed through the sensor on the System side. After connecting to a CONTROL IN jack on another component, its sensor will no longer receive signals. To operate a component remotely, point the remote control unit of the connected component at the remote control sensor on the System. A • Make sure the power is turned off when making connections. • Please complete all component connections before making control cord connections.

• Pioneer PDP-4330HD, E-49 Useful adjustment settings Voluntary movie rating system (MPAA) 1 Press MENU. 2 Press a/b to select “Setup”, and then press SET/ ENTER. • Secret number setting menu displays only when “Secret No.” is set. (See page 52.) • V-CHIP and Status will not be selectable from the menu if you do not first configure your secret number. (See page 52.) 3 Enter your 4-digit secret number with 0 – 9 to cancel the “Secret No.” when you set it. 4 Press a/b to select “Parental CTRL”, and then press SET/ENTER. 5 Press a/b to select “V-Chip”, and then press SET/ ENTER. 6 Press a/b to select “MPAA”, and then press SET/ ENTER. 7 Press a/b to select th

More Instructions:

	Pioneer PDP-4330HD Product & training manual 02-02-2024 53	DOWNLOAD
	Pioneer PDP-4330HD Operating instructions manual 10-02-2024 93	DOWNLOAD

Related Products and Documents (Flat Panel TV):

Comparable Devices:

Similar Resources:

• Toshiba 42H81 (54 pages) Projection Television© 2002 TOSHIBA CORPORATIONAll Rights Reserved42H8150H8157H8165H81OWNER'S MANUALTMOwner's RecordThe model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.Model number: Seri …

• Philips 244EL2SB (3 pages) PhilipsLCD monitor with HDMIE-line24" (61 cm)244EL2SBGreat entertainment on your big HDMI LED displayThis Big 244EL2 HDMI Full HD multimedia LED display with stylish SmartTouch controls is ready to engage you in the gaming and movie worldGreat picture quality• Full HD LCD display, 1920x1080p resolution• 16:9 display for best widescreen gaming and v …

• LG 47LA690T (100 pages) www.lg.comP/NO : MFL67653114 (1302-REV00)Please read this manual carefully before operating your set and retain it for future reference.OWNER’S MANUALLED TV* LG LED TV applies LCD screen with LED backlights.42LA690047LA690055LA690047LA690T55LA690T60LA740T60LA7400 …

• Sylvania LC190SL1 (120 pages) EnglishFrançaisEspañolNeed help? Please call toll free or visit our web site belowBesoin d’aide? Appelez notre numéro gratuit ou visitez notre site web à l’adresse¿Necesita ayuda?Llame por favor sin costo ó visite nuestro sitio web enEN Owner's manualFR Manuel du propriétaireESManual del propietario© 2010 Funai Electric Co., Ltd.MODEL NUM …

• Samsung LE23R51B (10 pages) English-5Viewing the Connection PanelWhenever you connect an audio or video system to your set, ensure that allelements areswitched off. Power InputBN68-00801F-00Eng.qxd 1/11/05 2:40 PM Page 5 …

• Toshiba 40XV640OU (2 pages) LEADING THE WAY IN HOME ENTERTAINMENT INNOVATION40XV640U1080p Full HD LCD TVwith ClearFrame™ 120HzLEADING THE WAY IN HOME ENTERTAINMENT INNOVATION40XV640U 40.0” diagonal 1080p HD LCD TV with ClearFrame™ 120HzPRELIMINARYADVANTAGE• 1080p Full HD CineSpeed™ Display• ClearFrame™ 120Hz with 5:5 Pull-Down Option• DynaLight™ Dynamic Backlight …

Comments, Questions and Opinions: