Manualios.com

Pioneer PDP-505HD Operating Instructions Manual

Pioneer PDP-505HD Manual Online:

4.15, 595 votes
Pioneer PDP-505HD User Manual
Pioneer PDP-505HD User Guide
Pioneer PDP-505HD Online Manual

Text of Pioneer PDP-505HD User Guide:

  • Pioneer PDP-505HD, Checkin9 supplied accessories Check that the following accessories were supplied, _1}'Power cord _2_,Remote control unit _3) AA (LR6) batteries x 2 _4_Cleaning cloth (for wiping front panel) _ Bead band x 2 • Operating Instructions • Warranty _5_Speed clamp x 2

  • Pioneer PDP-505HD, About the input jacks this unit Connection to INPUT1 Connect the output jacks of components to the input jacks of this unit following the list below (pages 10 to 14), In ut of Connected component andsignals AV component INPUT1 INPUT2 INPUT3 .1 INPUT4 .1 Composite video S video Component video RDB Personal computer (PC) Composite video S video RDB Connect an AV component that has a video or S-video output jack to the INPUTljacks on the main unit, It is possible to use both the VIDEO and S-VIDEO jacks of INPUT1 at the same time for the connection, However, if simultaneous signals are received, the S-video signal is given priority, PLIItlL "1 Although INPUT3 and

  • Pioneer PDP-505HD, _J GL_ELY_J _:RE_N -- Mode switch ® CABLE control buttons CABLE and SAT cannot be selected at the same time, When the mode switch is set to CBL/SA] the cable converter connected to this unit can be operated using the buttons (1" to (_, Cable converters which are made by other makers and are not preset can also be operated using the remote control unit if buttons (1_'to (5) have learnt the functions (page 41), (1) Direct channel selection buttons Press the button (or buttons) that corresponds to the channel that you wish to watch (2) CH (channel) +, - buttons Press plus (+) or minus (-) to tune in a higher or lower channel _._ SOURCE POWER button Turns the

  • To create a still image of the video To confirm display settings image on the screen 0 QJ GU<Z)_ --STILL SCRE_ q) q) --DISPLAY Press STILL on the remote control unit. The image culrently being viewed is preselved on the screen This flJnction is convenient for viewing things on the screen that would no_mally be clea_ed before the_e was ample time to view it (recipes in a cooking p_og_am f

  • To learn remote control signals To operate odrer manufacturers' remote control signals that cannot be p_eset using the remote control unit, have the _emote control unit learn these signals, LED indicator Q CLI GL_3U [JJ S_EN 2,5 ll--_ .... --1 --2 Example) ]o learn the operation to turn the VCR power on 1 Set the mode switch to TV/VCR (first position) when a video cassette re

  • Pioneer PDP-505HD, Adjusting the screen Adjust when INPUT2, INPUT3 or INPUT4 is selected, (Adjustments on this page cannot be made when INPUT 1 is selected) The SCREEN adjustment screen provides the adjustment items listed in the right column 2,3,4,5 1 Press MENU to display the menu screen. The menu screen appears 2 Press A/V to select SCREEN, then press SET/SELEC_ 3 Press A/V to select OTHER, then press SET/SELECT. When viewing an image from a persona[ computeh the following screen is displayed. 4 Press A/V to select the adjustment item, then press SET/SELECT. 5 Press <1/I_ to carry

  • Pioneer PDP-505HD, How to use his manual This manual is set up to follow the course of actions and operations in the o_der that would seem most logical for someone setting up this unit, Once the unit has been taken out of the box, and it has been confirmed that all the parts have been received, it may be beneficial to look over the section "Part Names and Functions" starting on page 6 to become acquainted with the plasma monitor and remote control unit, as their respective buttons and controls will be referred to throughout this manual For descriptions of the remote control unit buttons used to control oth

  • Pioneer PDP-505HD, Connection te INPUT3 and NPUT4 Various components can be connected to the INPUT3 and INPUT4jacks After connections are made, on-screen setup is necessary to match the characteristics of the connected component, Please see pages 17 to 19 for on-screen setup after connection NPUT3 jack VD 3utput source_ Video cornponenb )orsonal computer (PC) with RGBoutput VD Video component with component video output Y (CB/%) (Cr#P,/) : Do not connectanything. O : Connect to thisjack. Note Cornponer/ts compatible with INPUT3are also compatible with INPUT4 When making connections to INPUT4, please refer to supplement 3 on page 57 ] INPUT3 and INPUT4 are compatible with, please

  • Pioneer PDP-505HD, CLkGLJ_(_J _EEN -- Mode switch / SAT control buttons CABLE and SA] cannot be selected at the same time, When SAT is preset by "Remote code set up", the lemote control unit buttons will fiJnction as shown below, • When a satellite broadcast tune_ is connected to this unit, p_ess the input selector button that has the same number as the connected input terminal and set the mode switch to CBL/SAT The tuner can be operated using buttons (1" to _8} • Satellite broadcast tuners which are made by other makers and a_e not p_eset can also be operated with the remote control unit if buttons q) to "8"have learnt the functions (page 41) (1) Direct channel selection bu

  • Pioneer PDP-505HD, FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation, Product Name: Plasma Display Model Number: PDP-505HD Product Category: Class B Personal Computers & Peripherals Responsible Party Name: PIONEER ELECTRONICS SERVICE, INC. Address: RO. BOX 17

  • Setting the F LM MODE The FILM MODE function automatically detects movie film recorded at 24 flames per second, and converts it into a high quality progressive video image delivering the picture at the same rate as it was recorded, • Normally, this fiJnction should be set to "HQ" (High Quality), however, occasionally this setting may cause slight syncopation problems with the audi

  • Adjusting the picture quality The PICTURE adjustment screen provides the adjustment items listed in the right column, 1,5 2,3,4 2,3,4 1 Press MENU to display the menu screen. The menu screen appears 2 _e_ ./. to select PICTURE, then press SET/SELECT. When viewing an image from a personal computer from INPUT3 or INPUT4, the following screen is displayed. 3 Press A/V to select the adjustment

  • Pioneer PDP-505HD, What may at first seem to be an maMJnction, may be _emedied with a quick check, Please check to see if a warning is displayed on the screen If displayed, refe_ to page 53 and check the mode If there is no display check to see if the p_oblem is listed below, The p_oblem may also be caused by something othe_ than this unit so please also check the othe_ components being used such as a video deck If the p_oblem can still not be solved please consult the dealer where this unit was purchased General problems Problem Possible Solution • No power • Is the power cord disconnected? (page 15) • Has the MAIN POWER switch been switched on? (page 6) • Unit cannot be

  • Pioneer PDP-505HD, Remete ¢ent em uni This unit incorporates the use of a "learning" remote control unit This page describes the buttons and controls directly connected with the functioning of the main panel unit For more information about how this remote control can be used in conjunction with your othe_ components, please refer to the sections "Remote code set up" on page 39 and "Remote control unit functions" on page 42" switch @ m_ @ _1_,(_ STANDBY/ON button Press to put tile urfit in operation ol standby mode (page 20) q2],INPUT buttons Use to select the input (page 20) ' 3 _

  • Pioneer PDP-505HD, IMPORTANT The lightning flash with arrowhead symbol, within all equilateral triallg]e, is intended to alert the user to the presellce of Unlr_sulated "dangerous voltage" within the product's erlclosure that may be of suf[iclenL magnitude to coMstitute a risk of electric shock to persor_s CAUTION CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT NOTICE The serial number for this equipment is located on the rear pa

  • Pioneer PDP-505HD, Centm cord connection Pewer ¢erd connection When control cord connections are made, remote CONtrOl operation of connected PIONEER components that bear the _ logo mark is done through the remote sensor on this unit When the connection is made to the CONTROL INjack on another unit, the remote sensor of that component will no longer receive signals Point the remote control unit of the coRRected compoRent at the remote control sensor on this unit to control, Notes • Make sure the power is turned off when making connections. • Please complete all component connections before ma

  • Pioneer PDP-505HD, POWER SAVE Using the POWER SAVE function of this urfit, the power mode can be automatically put in standby mode when a video or computer signal has not been detected (An indication will appear on the screen before the standby mode is engaged), 1w5 2,3,4 1 Press MENU to display the menu screen. The menu screen appears 2 Press A/V to select SET UP, then press SET/SELECT. 4 Press A/V to select the POWER SAVE mode. • When "OFF" is selected, this unit will stay in operation mode regardless of whether a synchronization signal is input or not • When "MODE1 " is sele

  • G ON SYNC setup The RGB video signal is normally composed of 5 signals; R, G, B, HD and VD With G ON SYNC connection, howeveb the signal is composed of 3 signals; R, G (G, HD and VD combined) and B, If the component being used is a model where G ON SYNC connection is carded out, the following on-screen setup is necessary, Setup of G ON SYNC connection 1,5 2,3,4 1 Press

  • Pioneer PDP-505HD, Selecting an input source This section explains the basic operation of this unit Outlined on the following pages is how to turn the main powe_ on and of], put this unit in the operation or standby mode and how to select connected components, Before you begin, make sure you have: • Made connections between this unit and AV components o_ personal computer as described in the section "Installation and Connections" starting on page 9 • Set up the on-screen menu to input signals from components connected to INPUT3 and INPUT4 as described in the section "Setting Up the System"

  • Pioneer PDP-505HD, Adjusting the ce_ertemperature ef the screen (COLORTEMP) This function enables the video image to be set to one of five different tones, cH _ _OL 2,3,4,5 3 Press A/V to select OTHER, then press SET/SELEC_ 4 Press A/V to select COLOR TEMP, then press SET/SELECT. J 1 Press MENU to display the menu screen. The menu screen appears 2 Press A/V to select PICTURE then press SET/SELECT. 5 Press </l_ to select COLOR TEMP setting. Select the color temperature setting that best matches your preferences and viewing environment, • NEWS: Causes the colors displayed to appear in cooler hues than those in LIVE • LIVE: Causes the colors displayed to appear

  • Pioneer PDP-505HD, DTV control buttons When the mode switch is set to DTV, your DTV Set Top Box can be operated using buttons (1} to (_ of this remote control unit. Even if your DTV Set lop Box is not preset the remote control signals, buttons (1} to ,19will be available by performing the learning function of this remote control unit (page 41) (1) CC button Displays captions during closed-caption broadcasts _2_, DTV AUDIO button Press to select the audio mode during multiaudio broadcasts, ' 3 _Direct channel selection buttons P_ess the button (or buttons) that corresponds to the channel that you wish to watch (4) _ (DOT) button Used in channel

  • Pioneer PDP-505HD, Hew te reute cables Speed clamps and bead bands are included with this unit for bunching cables together Orlce components are connected, follow the following steps to route cables, * AS viewed from the rear of the display 2 1 Organize cables together using the provided speed clamps. Inse_t(1_into an appropriate hole on the _ea_of the unit, then snap (2} into the back of (1} to fix the clamp, Speed clamps are designed to be difficult to undo once in place, Please attach carefully To attach the speed clamps to the main unit Connect the speed clamps using the 4 holes marked with • below, depending on the situation 2 Bunch separated cables together and secure them with the provi

  • Pioneer PDP-505HD, 3 Press A/W to select CONTRAST, then press SET/SELECT. The CONTRAST adjustment scleen appeals. 4 Press 41/1_to adjust the CONTRAST setting. The CONTRAST setting is adjusted, 5 When you have finished adjusting the CONTRAST setting, press SET/SELECT to return to the PICTURE adjustment menu screen. 6 Having made an adjustment to the CONTRAST setting, the MODE setting displays "USER (STD)" to indicate that the current screen mode is a user modified mode based on the standard screen defaults. Additionally, "

  • Understanding the MENU screens Pressing the MENU button on the remote control unit opens the MAIN MENU screen The MAIN MENU screen is the primary starting screen for all internal system adjustments and functions divided up into the PICTURE adjustment screen, SCREEN adjustment screen, and SET UP screen Select the desired menu item using •/v on the remote contro

  • Pioneer PDP-505HD, Auto selection (AUTO SCREEN) A number of different video formats will appear on the scleen in a space smaller than the actual screen size in o_de_ to presewe the aspect ratio of the original format The AUTO SCREEN function identifies what type of format is being displayed and automatically selects a screen size that takes advantage of the entire screen size Please note, however, that the original source aspect and screen may not be p_eserved when this function is used, Using the remote control unit Notes • For some DVD

  • Pioneer PDP-505HD, Viewing a fast moving picture (3Dwc LEVEL) When viewing a fast moving picture such as might be experienced with a sports program, setting this mode to an appropriate level as determined by the video source will reduce picture blur, and produce a clearer image, • This setting can be adjusted along 5 points with "1 " recommended for viewing sources with a let of action and "5" recommended when viewing still images cH _ _OL /LU / 2.3.4.5. 2,3,4,5 / 1 Press MENU to display the menu screen. The menu screen appears 2 Press A/V to select PICTURE, then

  • Pioneer PDP-505HD, Automatic selection of screen size according to input signal By distinguishing between signals such as S1, $2 and HDTV video signals, screen size is automatically selected and the following indicators a_e displayed on the screen, Input signal Operation Screen indication When $1 video signal (squeeze) is input "FULL" screen size is automatically selected FULL ($1) When $2 video signal (letterbox) is input "ZOOM" screen size is automatically selected ZOOM ($2) When HDTV signal (1920 x 1080 i, 1280 x 720 p) is "FULL" screen size is automatically selected FULL (HD) input During perso

  • Pioneer PDP-505HD, Supplement 3 Signal assignment of INPUT 4 (Mini D-Sub 15 pin socket connector) 5 1 15 11 Pin No. Input 1 R or CR/PR 2 GorY 3 B or CB/PB 4 NC (No Connection) 5 GND 6 GND 7 GND 8 GND 9 DDC + 5V 10 GND 11 NC (No Connection) 12 DDC SDA 13 HD or H/V SYNC 14 VD 15 DDC SCL Macintosh is a registered trademark dApple Computer, Inc Microsoft is a registered badommk of Microsoft Co_po_ation PC_9800 is a trademark of NEC Corporation NEC is a badomark of NEC Colporation VESA is a registered tl_demark of Video Electronics Standards Association Sun Microsystems is a rogssterod bademarks of Sun Microsystems, Inc E×planation of Terms Aspect ratio The TV scre

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Whirlpool LG6056XSW0 Parts list whirlpool/lg6056xsw0-KYL.pdf 08 Feb 2024 11 0.19 Mb
2 Proceq Pundit Lab Operating instructions manual proceq/pundit-lab-OTT.pdf 16 May 2023 17
3 Monessen Hearth SC18-EK Log placement instructions monessen-hearth/sc18-ek-5ZA.pdf 11 Aug 2023 2
4 Avaya 6408D+ Product view avaya/6408d-NS7.pdf 17 Nov 2023 2 0.03 Mb
5 Aprilaire 1710 Installation & owner's manual aprilaire/1710-OAW.pdf 30 Dec 2022 2 0.11 Mb
6 LG M2631D Owner's manual lg/m2631d-368.pdf 08 Oct 2022 44

Similar Resources:

  • Philips

    190X6FB

    (3 pages)
    PhilipsLCD monitor with LightFrame™ DR48 cm (19")SXGA190X6FBdesign and performance count!The ultimate display for your lifestyle! Ready to rock your world with stunning performance, the hot Philips 190X6 combines LightFrame™ Digital Reality for the multimedia adventure with cool, innovative cutting-edge design flair.Outstanding front of screen per …
  • Envision

    EN-780e

    (15 pages)
    EN-780e131MY02EN-780e_31MY02EN-780e17 inch Flat CRT Color MonitorUser’s Manualby Envision Peripherals, Inc.www.ENVISIONmonitor.comBefore operating your monitor, please read thismanual thoroughly. …
  • NEC

    42XP10 - PlasmaSync - 42" Plasma Panel

    (10 pages)
    NEC Corporation of America Visual Systems Division P42XP10-BK Installation Guide 42” Plasma Display Rev 1.0 www.necvisualsystems.com P42XP10-BK Page 1 of 10 Contents: Product Description and Notes Page 1 Ventilation Requirements Page 2 Display Dimensions Front, Top …
  • Tektronix

    760A

    (172 pages)
    Instruction Manual760A/760D/760NStereo Audio Monitors(760A S/N B050000 & Above)(760D/760N S/N B030000 & Above)070-5992-05WarningThe servicing instructions are for use by qualifiedpersonnel only. To avoid personal injury, do notperform any servicing unless you are qualified todo so. Refer to all safety summaries prior toperforming service.Please check …
  • Dell

    P2012H

    (1 pages)
    478.4 (18.83)444.36 (17.49) 17.02 (0.67)17.02 (0.67)250.66 (9.87)284.70 (11.21)17.02 (0.67)17.02 (0.67)Pivot90°474.56 (18.68)571.41 (22.50)93.01 (3.66)265.84 (10.47)183.34 (7.22)48.68 (1.92)21°182.63 (7.19)485.69 (19.12)332.21 (13.08)Swivel45°59.5 (2.34)23.25 (0.92)189.86 (7.47)Tilt42.30 (1.67)15.0 (0.59)Lift130 (5.11)28.91 (1.34)200.34 (7.89)344.56 (13.5 …
  • Lexmark

    C746

    (4 pages)
    Printing guideGet the most from the printer by properly loading the trays and properly setting the types and sizes of media.Loading the standard or optional 550‑sheet trayThe printer has one standard 550‑sheet tray (Tray 1) and may have up to three optional 550‑sheet trays. All 550‑sheet trayssupport the same paper sizes and types.CAUTION—POTENTIAL …

Comments, Questions and Opinions: