Manualios.com

Pioneer SC-1222-K Operating Instructions Manual

Pioneer SC-1222-K Manual Online:

3, 1157 votes
Pioneer SC-1222-K User Manual
Pioneer SC-1222-K User Guide
Pioneer SC-1222-K Online Manual

Text of Pioneer SC-1222-K User Guide:

  • Pioneer SC-1222-K, 91         13 FAQ Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercis- ing the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work. ! If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again t

  • Pioneer SC-1222-K, 2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION

  • Pioneer SC-1222-K, 47         05 Basic playback ! If the Bluetooth wireless technology device’s security code is “0000”, there is no need to make the security code setting on the receiver. Press ADPT to set the ADAPTER PORT input, then conduct the pairing operation on the Bluetooth wireless technology device. If pairing is successful, there is no need to performing the pairing operation below. ! When using the AS-BT200 only: This unit complies with Bluetooth Specifications Ver. 2.1. When this unit and another device equipped wit

  • Pioneer SC-1222-K, 87         12 The System Setup and Other Setup menus Parental Lock Set restrictions for using Internet services. Also set the password accompanying the usage restrictions. ! Upon shipment from the factory, the password is set to “0000”. Important When the INTERNET RADIO, SiriusXM, PANDORA or FAVORITES input is selected, the setting made here can- not be reflected. 1 Select ‘Parental Lock’ from the Network Setup menu. 2 Input the password. Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection. 3 Specify whether to turn Parental Lock on or off. ! OFF – Internet services are not restricted. ! ON – Intern

  • Pioneer SC-1222-K, 93         13 FAQ ADAPTER PORT terminal Symptom Remedy The Bluetooth wireless technology device cannot be connected or oper- ated. Sound from the Bluetooth wire- less technology device is not emitted or the sound is interrupted. Check that no object that emits electromagnetic waves in the 2.4 GHz band (microwave oven, wireless LAN device or Bluetooth wireless technology apparatus) is near the unit. If such an object is near the unit, set the unit far from it. Or, stop using the object emitting the electromagnetic waves. Check that the Bluetooth wireless technology devi

  • Pioneer SC-1222-K, 32         03 Connecting your equipment MULTI-ZONE setup using speaker terminals (ZONE 2) You must select ZONE 2 in Speaker system setting (page 84) to use this setup. 1 Connect a pair of speakers to the surround back speaker terminals. You should have a pair of speakers attached to the surround back speaker terminals as shown below. 2 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver. R Sub zone (ZONE 2) Main zone VIDEO IN (Single) SURROUND BACK RL ZONE 2 OUT (Single) SURROUND BACK RL ZONE 2 OUT L 2 1 Secondary MULTI-ZON

  • Pioneer SC-1222-K, 84         12 The System Setup and Other Setup menus Making receiver settings from the System Setup menu The following section describes how to change the speaker-related settings manually and make various other settings (input selection, OSD language selection, etc.). 1 Press u RECEIVER to switch on the receiver and your TV. Make sure that the TV’s video input is set to this receiver. 2 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER t

  • Pioneer SC-1222-K, © 2012 PIONEER CORPORATION. All rights reserved. To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes : In the USA/Aux Etats-Unis http://www.pioneerelectronics.com In Canada/Aux Canada http://www.pioneerelectronics.ca S018_B1_EnFr <ARB7490-A> PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawas

  • Pioneer SC-1222-K, 95         13 FAQ Symptom Remedy No picture or sound. This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-compatible. If they are not, please connect them using the component or composite video jacks. Depending on the connected source component, it’s possible that it will not work with this receiver (even if it is HDCP-compatible). In this case, connect using the component or composite video jacks between source and receiver. If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual

  • 61         Setting the Audio options ............................................................................................................62 Setting the Video options ............................................................................................................. 64 Switching the speaker terminals .....................................................

  • Pioneer SC-1222-K, 48         Enjoying various types of playback using the listening modes ................................................49 Selecting MCACC presets .............................................................................................................. 50 Choosing the input signal ............................................................................................................. 50 Better sound using Phase Control ................................................................................................51 Listening to your system

  • Pioneer SC-1222-K, 7         Checking what’s in the box ............................................................................................................8 Our philosophy ................................................................................................................................8 Features ............................................................................................................................................ 8 Installing the receiver ...........................................................

  • 90         Troubleshooting ............................................................................................................................91 Power ..............................................................................................................................................91 No sound ........................................................................

  • 100         14 Additional information Surround sound formats Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information. Manufactured under license from Dolby Laboratories. �

  • Pioneer SC-1222-K, 101         14 Additional information Windows 7 Windows and the Windows logo are trademarks of the Microsoft group of companies. Auto Surround, ALC and Stream Direct with different input signal formats The following charts show what you will hear with different input signal formats, depending on the Stream Direct mode (see Using Stream Direct on page 50) you have selected. Stereo (2 channel) signal formats Input signal format Auto Surround / ALC / DIRECT PURE DIRECT Surround Back speaker(s): Connected Dolby Digital Surround 2 Pro

  • Pioneer SC-1222-K, 31         03 Connecting your equipment Connecting external antennas To improve FM reception, connect an external FM antenna to FM UNBAL 75 W. ANTENNA AM LOOP FM UNBAL 75 ANTENNA AM LOOP FM UNBAL 75 75 Ω coaxial cable To improve AM reception, connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated wire to the AM LOOP termi- nals without disconnecting the supplied AM loop antenna. For the best possible reception, suspend horizontally outdoors. ANTENNA AM LOOP FM UNBAL 75 ANTENNA AM LOOP FM UNBAL 75 Outdoor

  • Pioneer SC-1222-K, 19         03 Connecting your equipment Determining the speakers’ application This unit permits you to build various surround systems, in accordance with the number of speakers you have. ! Be sure to connect speakers to the front left and right channels (L and R). ! It is also possible to only connect one of the surround back speakers (SB) or neither. ! If you have two subwoofers, the second subwoofer can be connected to the SUBWOOFER 2 terminal. Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction. In this case, the same sound is output from the two subwoofers. Choose one from Plans [A] to

  • Pioneer SC-1222-K, 97         13 FAQ Symptoms Causes Remedies Audio playback is undesir- ably stopped or disturbed. The audio file currently being played back was not recorded in a format playable on this receiver. Check whether the audio file was recorded in a format sup- ported by this receiver. Check whether the folder has been damaged or corrupted. Note that there are cases where even the audio files listed as playable on this receiver cannot be played back or displayed (page 57). The LAN cable is currently discon- nected. Connect the LAN cable properly (page 32). There is hea

  • Pioneer SC-1222-K, 94         13 FAQ Symptom Remedy The various system settings are not stored. Do not pull out the power cord while conducting the settings. (The settings will be stored when both the main zone and sub zone turn off. Turn off all zones before pulling out the power cord.) Certain listening modes or HOME MENU items cannot be selected. When Operation Mode is set to Basic, the Pioneer-recommended settings are made and not all of the functions can be used. To use all of the functions without restrictions, set Operation Mode to Expert (see Operation Mode Setup on page 40). Professional Calibration EQ graphica

  • Pioneer SC-1222-K, 42         05 Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. INPUT SELECT iPod USB CBL SATTUNER ADPT CDTV RECEIVER BDR BD DVDDVR NET HDMI VOLUME RECEIVER AUTO/ALC/ DIRECT RECEIVER 1 1 Switch on your system components and receiver. Start by switching on the playback component (for example a DVD player), your TV and subwoofer (if you have one), then the receiver (press u RECEIVER). Make sure that the TV’s video input is set to this receiver. 2 Select the input function you want to

  • Pioneer SC-1222-K, 23         03 Connecting your equipment Selecting the Speaker system The front height terminals can be used for front wide and Speaker B connections, in addition to for the front height speakers. Also, the surround back terminals can be used for bi-amping and ZONE 2 connections, in addi- tion to for the surround back speakers. Make this setting according to the application. Front height setup *Default setting 1 Connect a pair of speakers to the front height speaker terminals. See Standard surround connection on page 21. 2 If n

  • Pioneer SC-1222-K, 79         11 The Advanced MCACC menu Standing Wave ! Default setting: ON/ATT 0.0dB (all filters) Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate mutually with sound waves reflected off the walls in your listening area. This can have a negative effect on the overall sound, especially at certain lower frequencies. Depending on speaker placement, your listening posi- tion, and ultimately the shape of your room, it results in an overly resonant (‘boomy’) sound. Th

  • Pioneer SC-1222-K, 81         11 The Advanced MCACC menu Standing Wave Use this to display the standing wave related adjustment values for the various MCACC memories. See Standing Wave on page 79 for more on this. 1 Select ‘Standing Wave’ from the MCACC Data Check menu. 2 When ‘Filter Channel’ is highlighted, use i/j to select the channel for which you want to check standing wave control. The standing wave related calibration value for the selected channel stored at the selected MCACC preset and its graph are displayed. 3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to che

  • Pioneer SC-1222-K, 77         11 The Advanced MCACC menu PHONES SPEAKERS MULT I-ZONE CONTROLON/OFF MCACC SETUP MIC TUNER EDIT USB HDMI 5 INPUT iPod iPhone iPad AUTO SURR/ALC/ STREAM DIRECT STEREO STANDARD SURROUND ADVANCED SURROUND iPod iPhone iPad DIRECT CONTROL BAND 5V 2.1 A Microphone Tripod If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position. If you do not have a tripod, use some other object to install the microphone. ! It may not be possible to measure correctly if the microphone is placed on a table, sofa, etc

  • Pioneer SC-1222-K, 107         14 Additional information Features index Operation Mode See Operation Mode Setup on page 40. AVNavigator See About using AVNavigator (included CD-ROM) on page 9. Full Auto MCACC See Automatically conducting optimum sound tuning (Full Auto MCACC) on page 37. Automatic MCACC (Expert) See Automatic MCACC (Expert) on page 76. Manual MCACC setup See Manual MCACC setup on page 78. PQLS See Setting the PQLS function on page 60. Phase Control See Better sound using Phase Control on page 51. Standing Wave See Setting the Audio options on page 62. Phase Control Plus See Setting the Audio op

  • 105         14 Additional information HDMI Control with HDMI function Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos- sible when the component is connected to the receiver using an HDMI cable. ! The receiver’s volume can be set and the sound can be muted using the TV’s remote control. ! The receiver’

  • 18         03 Connecting your equipment Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This chapter explains the kinds of components you can connect to make up your home theater system. CAUTION ! Before making or changing the connections, switch off the power and disconnect the p

  • Pioneer SC-1222-K, 39         04 Basic Setup The Input Setup menu You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according to the default settings (see Input function default and possible settings on page 39). In this case, you need to tell the receiver what equipment is hooked up to which terminal so the buttons on the remote control correspond to the components you’ve connected. ! The OSD display is only displayed when the receiver’s HDMI OUT terminal and the TV’s HDMI input are con- nected wi

Related Products and Documents (TV Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Ryobi RBL1850S Original instructions manual ryobi/rbl1850s-FG6.pdf 23 Nov 2023 152
2 Pioneer Eclipse revolution REV24NXG Operator's manual pioneer-eclipse/revolution-rev24nxg-C43.pdf 05 Jan 2023 56
3 Akura ADRW300 Operation & user’s manual akura/adrw300-2CY.pdf 15 Oct 2023 43 1.73 Mb
4 StudioTech Model 46 Interface Operation & user’s manual studiotech/model-46-interface-8B8.pdf 29 Dec 2022 33 0.96 Mb
5 Poulan Pro PP4000C Instruction manual poulan-pro/pp4000c-1RD.pdf 04 Nov 2023 28
6 Asus XONAR U5 SI Operation & user’s manual asus/xonar-u5-si-2E7.pdf 11 Dec 2023 20

Similar Resources:

  • Memorex

    MT2252S

    (24 pages)
    OWNER'S MANUALMANUAL DE INSTRUCCIONESMTS STEREO COLOR TELEVISIONTELEVISOR COLOR ESTEREO MTSBefore operating the unit, please read this manual thoroughly.Antes de utilizar su aparato favor de leer las siguientes instrucciones.MT2252SMT2271STV/CATV MODE SELECTIONSELECCION DE MODO DE TV/CATVWhen shipped from the factory, the TV/CATV menu option is set to t …
  • Pixel Magic

    Magic TV

    (2 pages)
    HDMI is the highest quality output from Magic TV™and can also carry multi-channel audio, reducing cabling.In order to get High Definition video from Magic TV™ without HDMI, Component (YPbPr) must be used.Not many TVs accept a digital audio signal in which case, the Stereo audio outputs of Magic TV™ can be used.Start hereThank you for choosi …
  • Bush

    DFTA45R

    (28 pages)
    INSTRUCTION MANUALHigh Definition Digital Set Top Box With USB RecordDFTA45RThe Gold Technical Support Line: 1902 215 259(Charges will apply at $2.95 per minute) …
  • Philips

    27RF50S

    (44 pages)
    3121 235 20241Read this manual first!Congratulations on purchasing this Philips product. We’ve included everything you need to get started. If you have any problems, Philips Representatives canhelp you get the most from your new product by explaining: • Hookups, • First Time Setup, and • Feature Operation.Do not attempt to return this product to the …
  • AMX

    DTV-MA01

    (2 pages)
    Installation GuideDTV-MA01 TDS Management ApplianceOverviewThe DTV-MA01 TDS Management Appliance (FG1412-01) manages television distribution in an AMX TDS (Television Distribution System) installation (FIG. 1). Rear Panel Components12 VDC Power ConnectorConnect the power adapter to the unit, and plug the power adapter into an AC power outlet.Note: Use ON …
  • Comcast

    X1

    (4 pages)
    View what’s on your favorite channelsTo set up favorite channels, Press “Guide” on your remote control. Scroll left to highlight a channel logo and number, press “OK”, and select “Favorite” from the options.To view the guide by Favorites, Press “Guide” twice on your remote. Select “Favorites” as your Guide view to see what’s on only …

Comments, Questions and Opinions: