Primare SP31.7 Operation & User’s Manual

Text of Primare SP31.7 User Guide:

• > 11 Connecting the SP31.7 This chapter explains how to connect the SP31.7 to the other components in your system, using the connections on the back panel. BACK PANEL CONNECTIONS ANALOG INPUTS MAIN OUTPUTS FRONT VIDEO OUT S-VIDEO INPUTS S-VIDEO OUT COMPONENT VIDEO DATA RS232 VIDEO INPUTS DIGITAL OUTDIGITAL INPUTS 1 87 6 543 12345 6 78 2 2 1 2 3 IN 1 Y P B P R IN 2 Y P B P R OUT Y P B P R 4

• Primare SP31.7, > Connecting the SP31.7 12 POWER CONNECTION Warning: Before connecting power check that the required supply voltage, indicated on the back panel, corresponds to your local AC supply. If a different voltage is stated on the type plate do not connect the SP31.7 to the mains power, and seek advice from your dealer. Connect the mains power using the enclosed mains cable. Note: Always disconnect the SP31.7 and the other units in your system from the mains power before connecting or disconnecting any of the cables. MAIN OUTPUTS T

• Primare SP31.7, > Connecting the SP31.7 13 RECORD OUTPUTS The SP31.7 provides three record outputs, two digital and one analog. Digital record outputs Both SPDIF and optical TOSlink digital record outputs are provided. Analog record outputs One analog RCA record output is provided. MICROPHONE, DATA AND RS232 The MIC input allows you to connect a microphone to the SP31.7, to allow you to run the SET LEVELS option which sets up the relative balance of each of the output channels for the optimum sound. The DATA input allows you to connect the SP31.7 to an external interface. The RS232 input allows an authorized dealer to connect the SP31.7 to a com

• Primare SP31.7, > Advanced use 9 •Press the SELECT button on the front panel or remote control to display the characteristics of the source signal. MAKING RECORDINGS The SP31.7 Multi-Channel Processor allows you to make a recording of a digital source to the two digital record outputs, or of an analog source to the analog record output. If the source also includes video, a copy of the video is made to the corresponding composite video or S-Video output. To make a recording you simply select the source you want to record. Once set up, the recording is not affected by the source you are listening to, the volume setting, or the setting of any other parameters

• Primare SP31.7, > 15 Setting up the speakers This chapter explains how to set up the speakers, levels, and delays for the best possible sound with your surround sound configuration. CONFIGURING THE SPEAKERS The first step in configuring the speakers is to specify which particular combination of speakers you have in your system. The diagrams shown below give some suggested alternative layouts. The SP31.7 can drive up to seven full-frequency loudspeakers and one subwoofer, but if your surround system does not include a full set o

• Primare SP31.7, > Advanced use 8 CHOOSING THE SURROUND MODE The surround mode determines how the sound is divided between the loudspeakers in your surround system. Each source is associated with a default surround mode, which will be used when you select that source, but you can choose a different surround mode for the source if you prefer. For example, the standard surround mode for the TV source is PLII PL, since most TV broadcasts are Pro Logic encoded, but if you are watching a music concert you may prefer to choose the Stereo or Bypass surround modes, as these give a more natural sound when listening to music. To change the surround

• Primare SP31.7, > 23 Configuring the display The SP31.7 provides several options to allow you to choose how information is displayed on the front panel and on-screen displays. This chapter describes the options for doing this, and gives examples of each of the options. CONFIGURING THE ON-SCREEN DISPLAY You can choose to show information about the SP31.7 settings superimposed on the video image as an on-screen display, and the SP31.7 provides a range of options to allow you to configure the position, color, and duration of the on-screen display. To change the on-screen display • Highlight DISPLAY SETTINGS in the SETUP MENU and press th

• iii > Contents Audio inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . {12 Video connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . {12 Record outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . {13 Microphone, data and RS232 . . . . . . . . . . . . . . . . . . . . . . . . .

• > 3 Using the SP31.7 Multi-Channel Processor This chapter explains how to operate the SP31.7 Multi-Channel Processor, using either the front panel controls or the direct remote control commands. FRONT PANEL CONTROLS Almost all the functions of the SP31.7 Multi-Channel Processor can be accessed using the two front panel controls and four push buttons, and information about its

• > Index 28 R RECALL FACTORY SETTINGS option ................................... 26 RECALL INSTALLER SETTINGS option ........................ 25, 26 RECALL SETTINGS option ........................................................ 25 record outputs ................................................................................. 13 recording ..................................

• Primare SP31.7, > Setting up the speakers 16 The SPEAKER CONFIG menu will be displayed: To define the GENERAL layout First define the GENERAL layout; the other layouts will all be based on this. •With MODE highlighted use the VOLUME control on the front panel or the < and > buttons on the remote control to select GENERAL. • Use the INPUT SELECTOR on the front panel or the A and V buttons on the remote control to highlight each menu option in turn. • Use the VOLUME control on the front panel or the < and > buttons on the remote control to select the appropriate value for each option. If you select SMALL for a channel, frequencies below the X- OVER se

• Primare SP31.7, > 25 Saving the configuration This chapter explains how to save the configuration of your SP31.7, and how to recall a saved configuration, or reset the SP31.7 to the factory settings. INTRODUCTION Once you have defined your own custom set of inputs, and have calibrated the speaker settings and other configuration options to suit your own requirements, you should save your settings permanently in the SP31.7. You can then return to your saved settings at any time using the RECALL SETTINGS option to undo any subsequent configuration changes. If the SP31.7 was set up for you by an installer, the installer will have saved a set of installer settings. You ca

• Primare SP31.7, > Setting up the speakers 18 The following display confirms that calibration is in progress: When the calibration is complete the SET LEVELS menu shows the level that has been set for each speaker: To change the speaker levels manually • Use the INPUT SELECTOR on the front panel or the A and V buttons on the remote control to highlight OUTPUT LEVELS - MANUAL in the SET LEVELS menu and press the SELECT button on the front panel or remote control to select it. The SET LEVELS menu shows the current speaker levels: • With MODE highlighted use the VOLUME control on the front panel or the < and > buttons on the remote control to select the layout y

• Primare SP31.7, > Introduction 2 Easy to set up The SP31.7 is also exceptionally easy to set up for a perfectly balanced surround sound. Simply plug a microphone into the appropriate SP31.7 input, and position it at the listening position. The built-in calibration test will then balance the level of each output to give a correct sound image for your system and the room you are listening in. USING THE SP31.7 WITH OTHER PRIMARE PRODUCTS Although the SP31.7 is flexible enough to work with virtually any other equipment you have in your system, it is ideal for us

• Primare SP31.7, > Using the SP31.7 Multi-Channel Processor 4 To dim the front panel display • Press the DIM button on the remote control. The display will dim to a single bar. The normal display will reappear while you adjust any settings. To restore the front panel display • Press the DIM button again. SWITCHING ON AND OFF To switch on • Use the switch under the left-hand edge of the front panel. During normal operation you can leave the SP31.7 switched on and in standby. To switch to standby • Hold down the STANDBY button on the front panel or the STBY button on the remote control. When the SP31.7 is in standby the red STANDBY

• Primare SP31.7, > 7 Advanced use This chapter explains how to make use of the more advanced features of the SP31.7 Multi-Channel Processor, including changing the surround mode and making recordings. USING THE MAIN MENU The advanced options described in this chapter are all available from the MAIN MENU, which you can display on the on-screen display using the remote control. To display the main menu • Press the MENU button on the front panel or remote control. The MAIN MENU will be displayed on the on-screen display: The INPUT MODE option is initially highlighted to show that it is selected. To e xit fro

• Primare SP31.7, > Preface ii COPYRIGHT AND ACKNOWLEDGMENTS Copyright © 2002 Primare Systems AB. All rights reserved. Primare Systems AB Idavägen 17D SE-352 46 Växjö Sweden Issue: SP31.7/2 The information in this guide is believed to be correct as of the date of publication. However, our policy is one of continuous development and so the information is subject to change without notice, and does not represent a commitment on the part of Primare Systems AB. Primare is a trademark of Primare Systems AB. Manufactured under license from Dolby Laboratories Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Confidenti

Related Products and Documents (Home Theater System):

Comparable Devices:

Similar Resources:

• LG LHD655 (4 pages) ENGLISHSIMPLE MANUALDVD HomeTheaterSystemTo view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.MODEL LHD655*MFL69400849*www.lg.comLHD655-FB.DEGYLLC_SIMPLE_ENG_0849.indd 1 2015-09-17  9:25:44 …

• Panasonic SH-FX50 - HOME THEATER SOUND (6 pages) 1PPRQT7992-2YF0105YM2035Dear customerThank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.Operating InstructionsManuel d’utilisationDigital Transmitter & …

• Denon DVD-1710 (56 pages) DVD VIDEO PLAYERDVD-1710/DVD-555OPERATING INSTRUCTIONSMODE D’EMPLOIINSTRUCCIONES DE OPERACIONDVD VIDEO PLAYERDVD VIDEO PLAYERDVD-1710DIMMERDIMMERON / STANDBYON / STANDBYSTILL / PAUSESTILL / PAUSEPLAYPLAY STOPSTOPOPEN/ CLOSEOPEN/ CLOSEDVDE5980_85UD(EN).qx3 04.4.23 6:27 PM Page 1 …

• Philips LX 8200SA (2 pages) The ultimate listening experience • Multichannel Super Audio CDWide and crystal clear sound • Omni-directional ribbon tweetersPowerful and deep bass • wOOx™ SubwooferSharper picture quality • DCDi Faroudja Progressive ScanImproved voice quality • Clear Voice for dialogue enhancement in moviesAluminium speaker standsLX 8200SALX 8200SADVD/Supe …

• Sony BDV-E6100 (2 pages) Speaker Installation GuideGuide d’installation des haut-parleursGuía para la instalación de los altavoces揚聲器安裝指南扬声器安装指南คำแนะนำในการติดตั้งลำโพง4-446-743-11(1)BDV-E6100/E4100/E3100/E2100©2013 Sony Corporation Printed in Malaysia (1)ภาษาไทยวางผ้ารอ� …

• Mitsubishi 3D DLP 642 Series (46 pages) 3D DLP ® HOME-CINEMA TELEVISIONMODELS642 SeriesC12 SeriesSUPPLEMENTAL OWNER’S GUIDE®• For questions: - Visit our website at www.mitsubishi-tv.com. - E-mail us at [email protected]. - Call Consumer Relations at 800-332-2119 for operational or connection assistance.• For information on System Reset, please see the back cover.• To order replacemen …

Comments, Questions and Opinions: