ProScan PLCD5085A Operating Instructions Manual

Text of ProScan PLCD5085A User Guide:

• ProScan PLCD5085A, 1 Contents Contents Caution Safety Information Unit and Accessories Product Feature Introduction 1. Front View 2. Rear View 4. Remote Control Basic Operation OSD Menu 1. Picture menu 2. Sound menu 3. Channel menu 4. Parental Control menu 5. Setup menu 6. Others menu Simple Troubleshooting 2 3 4 4 5-9 5 6 8-9 10 11-18 11-12 13 14 15-16 17 18 19 20 3. Instruction for Wall Mount 7

• ProScan PLCD5085A, 2 Caution Caution is intended to alert the user to the presence of un-insulated "dangerous to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Correct disposal of this Product (Waste Electrical & Electronic Equipment (WEEE) Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end- of-life should be disposed of separately from your househol

• 4 Unit and Accessories and Product Feature Unit and Accessories TV set User's Manual Remote Control and Batteries (AAA x2) Product Feature PICTURE SOUND SLEEP DISPLAY INPUT VOL+ VOL- EXIT MUTE MENU OK CH+ CH- 123 456 789 0 -/-- FAV CC EPG MTS 50 Three HDMI inputs for true digital connections HDMI is a trademark of HDMI Licensing LLC in the United States and o

• 5 Introduction Introduction 1. Front View 1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off. Indicator on(Red) Standby mode Indicator on(Green) Power on mode 2). The functions of the buttons: INPUT: Press to display the input source menu. MENU: Press

• ProScan PLCD5085A, 6 Introduction 2. Rear View 10). Headphone out : Connect it to your headphone or audio equipments. 3). 2). RF : Connect antenna or cable 75 Ohm coaxial to receive TV signal. 1). COAX : Digital audio output. 7). YPbPr : Connect them to the component video output of video device. : Connect it to the HDMI output of video device. 5). HDMI1/2/3 L/R in : Connect them to audio output of video device. L/R in : Connect them to audio output of video device. 9). L/R out : Connect them to audio equipments. VIDEO : Connect i

• ProScan PLCD5085A, 7 Introduction 3. Instruction for Wall Mount Dimensions for Mounting Hole Pattern A wall mount kit (purchased separately) would allow you to mount your PROSCAN TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. PROSCAN is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting. - This PROSCAN TV is compatible with a 400mm

• 8 Introduction 4. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the TV. The remote control may not work correctly if it is operated out of range or out of angle. CC: Press to display the closed caption. MTS: Press to select the audio channels. FAV: Press to add or remove favorite channel. EPG: Press to enter the EPG menu directly. DIS

• ProScan PLCD5085A, 9 Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. - The remote control should be operated within 23 feet(7m) and 30 0 to the left and right of the IR Receiver on the front of the TV. - Used batteries should be disposed properly.

• ProScan PLCD5085A, button to select the function item, press button to adjust/setup, 10 Power on/off 1. Connect to the power supply with the power cord, and turn on the switch. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display input source menu, and use CH^/vbutton on the TV set or Ĥ0ĥ!button on remote control to select the input source, press OK button on the remote control to enter. Note: Before you select the input source, make sure the connections are prepa

• ProScan PLCD5085A, OSD Menu 11 1. Picture menu Description Picture mode: Select between Dynamic, Standard, Movie, User and Power Saving. You may select the picture mode directly by pressing the PICTURE button on the remote control. Picture Settings: Press button to enter the Picture Settings menu. Screen Size: Select the displaying mode of the picture between Wide, Cinema, Zoom, Normal, Just Scan. PC Settings: If the video input signal comes from your PC, you may adjust the Vertical Position, Horizontal Position, Clock, Phase or even perform an Auto adjustment. Contrast: Control

• ProScan PLCD5085A, OSD Menu 12 Dynamic Contrast: Select the dynamic contrast mode between Off, Low, Medium and High. Film Mode: Activate or deactivate the Film Mode. Noise Reduction: If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Medium and High. MPEG Noise Reduction: Select the MPEG Noise Reduction option to reduce the picture noise level between Off, Low, Medium and High. Advanced Picture Settings: Press button to enter the Advanced Picture Settings. OSD Menu

• ProScan PLCD5085A, OSD Menu 13 2. Sound menu Description Sound Mode: Select your desired picture mode as follow: Dynamic, Standard, Soft and User. You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequency intensity. Treble: High frequency intensity. Balance: Left and right stereo audio channels balance. Surround Mode: Activate or deactivate the Surround function. OSD Menu Sound Settings: Press button to enter the Sound Settings menu. AVL: Activate or deactivate the Auto Volume Limited

• OSD Menu 14 Description 3. Channel menu Channel List: Display the channel list. Favorite List: Display the favorite channel list. Channel Settings: Press > button to display the Channel Settings menu. Signal Type: Allow you to select antenna between Air and Cable. Auto Channel Search: Press OK button to start auto channel search. Press button

• ProScan PLCD5085A, OSD Menu 15 4. Parental Control menu OSD Menu Description V-CHIP: Press button to enter the V-CHIP menu. You must enter the password to gain access to the Parental Control menu. The default password is 0000. You may modify the following options: TV Rating: Use buttons to select the desired rating and press button to block or unblock rating. Movie Rating: The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of America (MPAA) as broadcasted on cable

• ProScan PLCD5085A, OSD Menu 16 OSD Menu English Rating: Select among: C, C8+, G, PG, 14+ and 18+. French Rating: Select among: G, 8ans+, 13ans+, 16ans+ and 18ans+. Canada V-CHIP: Press button to enter the Canada V-CHIP menu. Block UnRated Show: Activate or deactivate the Block UnRated Show function. Downloadable Rating: Setting the Downloadable Rating in DTV mode when the program has the rating information. Clear Downloadable Data: Clear the downloadable data of the TV. Change password: Change the password, you must enter the new password twice to confirm it. Keypad Lock: Invalidate the buttons one the TV set. Source Lock: Invalidate the

• ProScan PLCD5085A, OSD Menu 17 Description 5. Setup menu OSD Menu Closed Caption: Press button to enter the Closed Caption menu. Caption Display: Activate or deactivate the Caption Analog Caption Type: Allow you to select the basic selection among: CC1, CC2, CC3, CC4, Text1, Text2, Digital Caption Type: Allow you to select the advanced selection among: Service1, Service2, Service3 Service4, Digital CC Preset: Select the Digital CC Preset between Digital CC Style: Setting the Digital CC Style. Menu Language: Select OSD menu language. Clock: Press button to enter the Clock menu. Text3 and Text4. Service 5 and Service 6. Time zone: Select the

• ProScan PLCD5085A, 18 OSD Menu 6. Others menu OSD Menu Description Blue Back: Turn on/off the blue screen function when there’s no signal. No Signal Power Off: The TV will turn off automatically if there’s no signal after 10 minutes. No Operation Power Off: The TV will turn off automatically if there’s no operation on the TV All Reset: Reset all the settings. after 3 hours.

• ProScan PLCD5085A, 19 Simple Troubleshooting Simple Troubleshooting If the TV has failed or its performance has seriously deteriorated, check the TV by using the following simple troubleshooting guide. If you can not resolve the problem with this troubleshooting, please call Technical Support. No power - Check all power connections to the TV. - Press either the power button or the Standby button on the Remote control. No picture or sound - Ensure that the TV is plugged in and the power is on. - Ensure that the antenna is connected. - Try a different program. Poor picture quality - Check the antenna connections. - Check if the channel is tuned in properly. - Adjust the picture settings: b

• ProScan PLCD5085A, 20 * Product specifications and appearance are subject to change without notice. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. R 50”LCD TV 50 inches (diagonal) 350nit 16.7M 8W +8W 4000:1 176(H)/176(V) 8 60Hz 235W

Related Products and Documents (Flat Panel TV):

Comparable Devices:

Similar Resources:

• Vizio L42HDTV10A (1 pages) VIZIOTHIS STATE-OF-THE-ART 42” LIQUID CRYSTAL HIGH DEFINITION TELEVISION CAN EASILY ENHANCE THE DECOR OF ANY FAMILY ROOM, LIVING ROOM OR DEN. WITH SUPERIORRESOLUTION AND BREATHTAKING COLOR PURITY, THE VIZIO L42 IS THE NEXT-GENERATION TV TO CARRY YOU INTO THE HIGH DEFINITION FUTURE.www.viziotv.comL42 HDTVFEATURES42” Diagonal, 16:9 Aspect Ratio, Active Ma …

• Philips 40PFL4706 (3 pages) PhilipsLCD TV with Pixel Precise HD40" classFull HD 1080p digital TV40PFL4706Limitless possibilities, sleek designLED, wireless, MediaConnectTreat yourself to an immersive experience with the latest ultra thin LED TV from Philips. With a powerful picture performance from Pixel Precise HD, the slim frame ensures you are always part of the action.See ev …

• Emerson EWL1503 (4 pages) HEAD PHONECOMPONENTPOWERINPUTDC12VS-VIDEOANT.AV-IN1VODEO AUDIO RLAV-IN2AUDIOYPBPRRLThis TV can receive C1 and C2 Caption and Text.Caption Mode(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-cast signal contains Caption Signals.(2)Paint-on mode: Displays input characters on the screen immediately.Pop-on mode: Once c …

• LG DU-42PZ60H (30 pages) PLASMA TVSERVICE MANUALCAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.CHASSIS : AF-03BBMODEL : DU-42PZ60/Hwebsite:http://biz.LGservice.come-mail:http://www.LGEservice.com/techsup.html …

• Toshiba CPBRO2005Eu (21 pages) experiencetrueHOME CINEMA CATALOGUE 2005-6TELEVISION PLASMA LCD DVD Ref: CPBRO2005EuThis brochure was produced using paperfrom a sustainable resourceToshiba Information Systems (U.K.) Ltd.Consumer Products DivisionToshiba CourtWeybridge Business ParkAddlestone Road, WeybridgeSurrey. KT15 2UL, U.K.www.toshiba.co.uk …

• Sony KDL-23S2010 - 23" Bravia™ Lcd Hdtv (84 pages) LCD DIGITAL COLOR TELEVISION SERVICE MANUAL WAX2 CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION 9-883-714-02KDL-23S2010 RM-YD005 CANADA KDL-23S2010 RM-YD005 US KDL-26S2010 RM-YD005 CANADA KDL-26S2010 RM-YD005 US KDL-32S2010 RM-YD005 CANADA KDL-32S2010 RM-YD005 US KDL-40S2010 RM-YD005 CANADA KDL-40S2010 RM-YD005 US KDL-46S2010 RM-YD005 CANADA KD …

Comments, Questions and Opinions: