Manualios.com

Sun Microsystems XVR-600 Installation And User Manual

Sun Microsystems XVR-600 Manual Online:

3.15, 2635 votes
Sun Microsystems XVR-600 User Manual
Sun Microsystems XVR-600 User Guide
Sun Microsystems XVR-600 Online Manual

Text of Sun Microsystems XVR-600 User Guide:

  • 32 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 Checking Device Configuration Use fbconfig to check the X window system (-propt) and Sun XVR-600 graphics accelerator (-prconf) device configuration values. The fbconfig -propt option displays the values of all options (for the specified device) saved in the OWconfig file (see below for an

  • Sun Microsystems XVR-600, Chapter 2 Installing the Sun XVR-600 Graphics Accelerator Software 17 4. Select the Sun OpenGL for Solaris version and press Return. The following is displayed. (Option 1, Sun OpenGL 1.3 for Solaris, is selected for this example on a Solaris 8 operating environment.) 5. Press Return to begin installation. When complete, the following is displayed: Note – Depending on your system configuration and time of installation, the actual output from the installation process might differ from what is shown below. 6. Shut down the syste

  • Sun Microsystems XVR-600, Chapter 2 Installing the Sun XVR-600 Graphics Accelerator Software 19 5. Press Return to start the removal process. Once complete, the following is displayed and the program provides the location of a removal log: Man Pages The Sun XVR-600 graphics accelerator man pages describe how you can query and set frame buffer attributes such as screen resolutions and visual configurations. Use the fbconfig(1M) man page for configuring all Sun graphics accelerators. SUNWjfb_config(1M) contains Sun XVR-600 device-specific configuration information. To get a list of all graphics

  • Sun Microsystems XVR-600, Index 51 installing software, 15 man pages, 19 multisample antialiasing, 29 OpenGL patches, 12, 13 overview, 2 removing software, 18 screen resolutions, 5 setting default console, 41, 42 software installation, 9 software package locations, 11, 12 software packages, 10 stereo DIN7 connector, 45, 48 Sun OpenGL for Solaris packages, 12 supported system platforms, 22 technical support, 8 video formats, 5, 6 Xservers file, 25 SUNWjfb_config man page, 19, 24 supported system platforms, 22 T technical support, 8 V video formats, 5, 6 X Xinerama, 27 restrictions,

  • Sun Microsystems XVR-600, 9 CHAPTER 2 Installing the Sun XVR-600 Graphics Accelerator Software This chapter provides Sun XVR-600 graphics accelerator software installation information. ■ “Software Requirements” on page 9 ■ “Sun XVR-600 Graphics Accelerator Software Packages” on page 10 ■ “Installing the Software” on page 15 ■ “Removing the Software” on page 18 ■ “Man Pages” on page 19 ■ “Avoiding Colormap Flash” on page 20 Software Requirements Your system requires the Solaris 8 2/02 and Solaris 9 operating environments, or a subsequent compatible version of the operating environm

  • xviii Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 Using UNIX Commands This document might not contain information on basic UNIX ® commands and procedures such as shutting down the system, booting the system, and configuring devices. See the following for this information: ■ Software documentation that you received with your system ■ Solaris™ operating

  • Sun Microsystems XVR-600, Appendix A Setting the Default Console Display 43 6. Connect your monitor cable to the Sun XVR-600 graphics accelerator on your system back panel. 7. To set a resolution (for example, 1280 × 1024 × 112), type: Reset the system: You can get a list of available resolutions for your display device by typing the following: ok setenv output-device mydev:r1280x1024x112 output-device=mydev:r1280x1024x112 ok reset-all ok cd /pci@8,700000/SUNW,XVR-600@1 ok .screen-resolutions

  • Sun Microsystems XVR-600, Chapter 4 Configuring Multiple Frame Buffers 27 Xinerama Xinerama is an X window system feature available in Solaris 8 system software and subsequent compatible releases for Sun graphics boards including the Sun XVR-600 graphics accelerator. Refer to the proper Xservers(1) man page and Xservers documentation for further information. Using Xinerama When the window system is started in Xinerama mode, all windows can be seamlessly moved across screen boundaries, thus creating one large, super high- resolution, virtual display. With Sun OpenGL 1.2.3 and 1.3 for Solaris or sub

  • Sun Microsystems XVR-600, 45 APPENDIX B Sun XVR-600 Graphics Accelerator Specifications This appendix provides I/O port specifications for the Sun XVR-600 graphics accelerator. ■ “I/O Port Specifications” on page 45 ■ “DVI Video Output Port” on page 46 ■ “Stereo Output Port” on page 48 I/O Port Specifications The external I/O ports are accessible through the I/O connectors on the Sun XVR-600 graphics accelerator backplate ( FIGURE B-1). FIGURE B-1 Sun XVR-600 Graphics Accelerator I/O Connectors The Sun XVR-600 graphics accelerator has the following ex

  • Sun Microsystems XVR-600, 26 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 2. Modify the file by adding the device locations for the applicable frame buffers being used. See the following examples: Enter the Xservers file content on a single line. This example shows the Xservers configuration file modified for one Sun XVR-500 graphics accelerator and one Sun XVR-600 graphics accelerator: This example shows the Xservers configuration file modified for one Sun XVR-600 graphics accelerator: 3. Log out, then log back in. If you are editing the Xservers file after completing all the installation steps outlined in C

  • Sun Microsystems XVR-600, 38 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 Framelock Cable Assembly The framelock cable assembly, FIGURE 6-1, is a Y-shaped cable assembly with three connectors for daisy-chaining multiple Sun XVR-600 graphics accelerator within a computer system. See Appendix B, “Stereo Output Port” on page 48, for the stereo connector pinout signals. FIGURE 6-1 Framelock Cable Assembly Note – There can only be one master Sun XVR-600 graphics accelerator device. You must configure all other Sun XVR-600 graphics accelerator devices as slaves. See the section “Configuring Sun XVR-600 Graphics Accelerators for Framelocking” on page 36. TABLE 6-1

  • 21 CHAPTER 3 Installing the Sun XVR-600 Graphics Accelerator Hardware This chapter provides Sun XVR-600 graphics accelerator hardware installation information. ■ “Before Installation” on page 21 ■ “System Configurations” on page 22 ■ “Installing the Hardware” on page 23 ■ “Monitor Cables” on page 23 ■ “Changing the Monitor Screen Resolution” on page 24 Bef

  • Sun Microsystems XVR-600, 10 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 Sun XVR-600 Graphics Accelerator Software Packages Install the required software packages for your Solaris operating environment from the CD-ROM provided with your Sun XVR-600 graphics accelerator installation kit. TABLE 2-1 lists the Sun XVR-600 graphics accelerator CD directories: TABLE 2-1 Sun XVR-600 Graphics Accelerator CD Directories Directory name Description License Binary Code License XVR-600/Solaris_8/Packages/

  • Sun Microsystems XVR-600, viii Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 Supplementary Information This product was tested and complies with all the requirements for the CE Mark. /S/ /S/ Dennis P. Symanski DATE Manager, Compliance Engineering Sun Microsystems, Inc. 4150 Network Circle, MPK15-102 Santa Clara, CA 95054 U.S.A. Tel: 650-786-3255 Fax: 650-786-3723 Donald Cameron DATE Program Manager Sun Microsystems Scotland, Limited Blackness Road, Phase I, Main Bldg Springfield, EH49 7LR Scotland, United Kingdom Tel: +44 1 506 672 539 Fax: +44 1 506 670 011

  • Sun Microsystems XVR-600, 36 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 For the maximum number of boards supported for each system, go to: http://www.sun.com/desktop/products/graphics/xvr600/ To order the framelock cable assembly, call Sun Telesales at 1-800-786-0404 and request spare part number 530-2754. You can also order the framelock cable assembly through the Sun store (http://store.sun.com) by ordering this part number under spare parts. Configuring Sun XVR-600 Graphics Accelerators for Framelocking 1. Desig

  • 25 CHAPTER 4 Configuring Multiple Frame Buffers This chapter describes procedures for setting up multiple frame buffers. ■ “Configuring Multiple Frame Buffers Through the Xservers File” on page 25 ■ “Xinerama” on page 27 Configuring Multiple Frame Buffers Through the Xservers File To run more than one frame buffer you must modify your Xservers file: /

  • Sun Microsystems XVR-600, 46 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 DVI Video Output Port FIGURE B-2 and TABLE B-1 shows the Sun XVR-600 graphics accelerator DVI connector and pinout signals. The DVI video output port is a 30-pin connector for a supported workstation monitor. The DVI video port supports both analog and digital resolutions, but both cannot be used simultaneously from the individual DVI port. FIGURE B-2 Sun XVR-600 Graphics Accelerator DVI Connector TABLE B-1 Sun XVR-600 Graphics Accelerator DVI Video Output Port Pin Signal 1 TMDS Data2— 2 TMDS Data2+ 3 TMDS Data2/4 Shield 4 No connect 5 No connect 6 DDC Clock (SCL) 7 DDC Bi-direction

  • Sun Microsystems XVR-600, Sun Microsystems, Inc. www.sun.com Submit comments about this document at: http://www.sun.com/hwdocs/feedback Sun ™ XVR-600 Graphics Accelerator Installation and User’s Guide Part No. 817-2195-11 May 2004, Revision A

  • Sun Microsystems XVR-600, Chapter 5 Using Sun XVR-600 Graphics Accelerator Features 31 The adaptive option is the default setting for -samples. When you use the -samples adaptive option, two samples are preallocated per pixel (extra samples are then assigned to pixels that need them). See TABLE 1-1 on page 6 for a list of how many samples per pixel are supported at various maximum 3D resolutions. Disabling Multisampling When you disable multisampling, no multisample rendering is possible. Only one sample per pixel is allocated, des

  • Sun Microsystems XVR-600, 40 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004 FIGURE 6-2 Sun XVR-600 Graphics Accelerator and Framelock Cable Assembly Designated First and second slave Sun XVR-600 graphics accelerators Sun XVR-600 Top of framelock cable assembly to master Sun XVR-600 slave Sun XVR-600 Optional Slave stereo glasses Cabling for second Daisy-chain/stereo connector master Sun XVR-600 Slave cables graphics accelerator stereo DIN7 connector graphics accelerator graphics accelerator graphics accelerator

  • Sun Microsystems XVR-600, iii Regulatory Compliance Statements Your Sun product is marked to indicate its compliance class: • Federal Communications Commission (FCC) — USA • Industry Canada Equipment Standard for Digital Equipment (ICES-003) — Canada • Voluntary Control Council for Interference (VCCI) — Japan • Bureau of Standards Metrology and Inspection (BSMI) — Taiwan Please read the appropriate section that corresponds to the marking on your Sun product before attempting to install the product. FCC Class A N

  • Sun Microsystems XVR-600, 1 CHAPTER 1 Sun XVR-600 Graphics Accelerator Overview This chapter provides an overview of the Sun XVR-600 graphics accelerator. ■ “Installation Kit” on page 1 ■ “Sun XVR-600 Graphics Accelerator Overview” on page 2 ■ “Installation Process” on page 5 ■ “Video Formats” on page 5 ■ “Technical Support” on page 8 ■ “Accessing Field Replaceable Unit Information” on page 7 To find the systems that support the Sun XVR-600 graphics accelerator, go to “System Configurations” on page 22,

  • Sun Microsystems XVR-600, Chapter 1 Sun XVR-600 Graphics Accelerator Overview 5 Installation Process Caution – The Sun XVR-600 graphics accelerator is not hot-swappable. Note – The Sun XVR-600 graphics accelerator operates best when installed in the system 66 MHz PCI bus connector slots (applies to systems with available 66 MHz PCI bus slots). 1. Install the Sun XVR-600 graphics accelerator software (Chapter 2). 2. Shutdown the system. 3. Install the Sun XVR-600 graphics accelerator hardware (Chapter 3), repower the system, and reboot (boot -r) for reconfiguration. 4. Modify the Xservers conf

  • Sun Microsystems XVR-600, 29 CHAPTER 5 Using Sun XVR-600 Graphics Accelerator Features This chapter provides Sun XVR-600 graphics accelerator feature information. ■ “Dynamic Multisample Antialiasing” on page 29 ■ “Checking Device Configuration” on page 32 Dynamic Multisample Antialiasing Multisampling (full-scene dynamic multisample antialiasing) removes the jagged edges on 3D data. An image is sampled at a higher resolution than the screen, typically two to eight samples per pixel. This method yields improved images, but at the price of possib

Related Products and Documents (Video Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Makita DDF343 Instruction manual makita/ddf343-C64.pdf 27 Aug 2023 12
2 Yardworks 060-3808-8 Operator's manual yardworks/060-3808-8-AO2.pdf 04 Apr 2023 24
3 Osprey XENITH 105 Owner's manual osprey/xenith-105-GO7.pdf 18 Mar 2023 11
4 ECS Liva One Operation & user’s manual ecs/liva-one-U58.pdf 23 Feb 2023 46
5 Cornelius P/N 629088756 Installation instructions cornelius/p-n-629088756-Y5D.pdf 11 Aug 2022 3 0.52 Mb
6 Samsung GW76N-S Owner's instructions & cooking manual samsung/gw76n-s-8QR.pdf 03 Sep 2022 32 5.4 Mb

Similar Resources:

  • Gigabyte

    GV-N210D2-1GI

    (32 pages)
    GV-N210OC-512I/GV-N210D3-512I/GV-N210TC-1GI/GV-N210TC-512I/GV-N210D2-1GINVIDIA® GeForceTM 210 Graphics AcceleratorUser's ManualRev. 10512MM-N210O5I-105RCopyright© 2010 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any form without the expressed, wr …
  • MSI

    FX5700-VT2DR256

    (2 pages)
    Hardware InstallationFollow the steps to install the VGA card :1. Remove the computer case.2. Locate the AGP slot on your mainboard. Warning: Inserting the VGA card into a wrong slot (e.g. PCI slot)will damage your card (refer to your mainboard manual for more Information).3. Put the card directly over the AGP slot and press one end of the car …
  • Gigabyte

    GV-RX30S128D-B

    (34 pages)
    GV-RX30S128D-BUser's ManualRadeon X300SE Graphics AcceleratorRev. 10112MD-X30S128DB-101Copyright© 2005 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted inany from without the expressed, written permission of GBT.TrademarksThird-party brands and names are …
  • Nvidia

    GeForce MX420

    (22 pages)
    GeForce4 MX-Series Graphics Accelerator User’s Manual Copyright This manual is the intellectual property of ALBATRON TECHNOLOGY CO., LTD. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic …
  • HP

    P Class 733/800/866MHz / 1GHz

    (3 pages)
    November 22, 1999 www.hp.com HP 24” Display (A1295A) (22.5” viewable) Wide Aspect Monitor Maximum Desktop – HP’s 24” wide aspect monitor Images from HP's VISUALIZE workstations can now be even larger. HP’s 24” wide aspect monitor can display resolutions up to 1920x1200 pixels, which results in 75% more viewable pixels than a tradit …
  • PNY

    GEFORCE GTX 760

    (1 pages)
    PNY Technologies, Inc. 100 Jefferson Road, Parsippany, NJ 07054 | Tel 408 567 5500 | Fax 408 855 0680 Features and specications subject to change without notice. The PNY logo are registered trademarks of PNY Technologies, Inc. All other trademarks are the property of their respective owners. © 2013 PNY Technologies, Inc. All rights reserved.BORN TO …

Comments, Questions and Opinions: