iBabyGuard Infant Snooze Baby Sleep Monitor Operation & User’s Manual

Text of iBabyGuard Infant Snooze Baby Sleep Monitor User Guide:

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 2 IMPORTANT INFORMATION – PLEASE READ FIRST BEFORE USE The remote receiver, model IBG iSnooze 5C (Parent Unit ) is sold as an optional item for the Infant Snooze. It can be used in place of the smartphone Apps. Only either the iBabyGuard™ Infant Snooze smartphone Apps or the Parent Unit can be used for communication with the Infant Snooze at any one time, but NOT both can be used simultaneously. Baby weight limit on the Infant Snooze for effective monitoring should fall within the range below: Avoid placing any cloth material between th

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 3 Care and maintenance of the mat NO JUMPING/STAMPING/SITTING NO SHARP HITS NO HEAVY WEIGHT BEYOND LIMIT NO BENDING NO HOLDING OF THE EDGE IN ONE HAND NO IMMERSING IN WATER  It is advisable to use the Infant Snooze for sleeping purpose and should not be used as a play mat.  Avoid major movement activity around the In

• Copyright 2012 iBabyGuard International www.iBabyGuard.com 4 Disposal instructions Do not dispose of the Parent Unit with unsorted waste. Improper disposal may be harmful to the environment and human health. Please refer to your local waste authority for information on return and collection systems in your area.

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 5 Parent Unit Status Indication Summary Sheet Status indication Event Remarks Calibration in progress The display will indicate an hour glass rotating in a circular motion Sleeping The display will be as shown when baby is sleeping soundly. Movement / Wake up alert The display will be shown whenever the baby moves. After the baby falls asleep, wake up alert is activated after a baby’s s

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 6 Table of Contents 1. GETTING STARTED ................................................................................................................................. 1 1.1 Parts description for the Parent Unit (Model IBG iSnooze 5C) ..................................................... 2 2. SETTING UP THE INFANT SNOOZE WITH PARENT UNIT ........................................................................ 4 2.1 Powering up the Parent Unit .......................................

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 7 6.2 Manual pairing of Infant Snooze and Parent Unit ...................................................................... 11 6.3 Low battery indication for Parent Unit ....................................................................................... 11 6.4 Low battery indication for Infant Snooze ................................................................................... 11 6.5 Error 1: Fiber sensor is broken ......................................................................................

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 1 1. GETTING STARTED Before you can use the mat, you need the following (not included in the product): - 2 X AAA dry cell battery for the Parent Unit For best performance, Lithium dry cell battery is recommended.

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 2 1.1 Parts description for the Parent Unit (Model IBG iSnooze 5C) 1 Turn the parent unit ON or OFF Reset alarm (Press and hold the button) 2 ALARM ENABLE button Turn alarm enable function ON or OFF Reset alarm (Press and hold the button) 3 SENSITIVITY button To set Infant Snooze sensitivity level Reset alarm (Press and hold the button) 4 TALK button Press to talk to your baby remotely 5 Speaker Listen to sound from your baby 6 Microphone To talk to your baby when press & hold on the TALK button 7 Vol

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 3 8 Alarm select switch To select the alarm type 9 Battery Compartment Uses 2 x AAA dry cell batteries (Batteries not included) 10 Lanyard hole To insert a lanyard (Lanyard not included with the product)

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 4 2. SETTING UP THE INFANT SNOOZE WITH PARENT UNIT 2.1 Powering up the Parent Unit Insertion of battery to the Parent Unit Open the battery compartment by sliding the cover upwards as shown by the arrow label. Insert the 2 AAA batteries. Insertion of battery to the Infant Snooze Flip the Infant Snooze over to the bottom side. Insert the 4 AA batteries inside the battery compartment. Cover

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 5 Power on Parent Unit Press and hold the power button till the LCD display is lighted up. The Parent Unit will establish connection with the Infant Snooze automatically. Once connection is established, the current baby status will be displayed. The display will indicate baby sleeping after the baby had settled down to sleep. Please refer to section 9 for details. When an auto-calibration process is in progress, the display will indicate

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 6 Volume There is a 3-step interval bar for adjusting the speaker volume on the Parent Unit . On the top right hand side of the Parent Unit , press on the up arrow button to increase volume or down arrow to decrease volume. To test the volume, power off the Infant Snooze to trigger ‘Link loss’ alarm. Adjust volume then power on the Infant Snooze again to regain connection. The volume indicati

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 7 Infant Snooze sensitivity There are 3 sensitivity levels to select. Press the sensitivity set button to toggle to the preferred sensitivity level. The sensitivity level selected is indicated on the top of the status screen as shown (highlighted in red).  3 (High, Default)  2 (Mid)  1 (Low) As your baby grows, there may be a need to tune the sensitivity to maintain high accuracy sensing. HINT: When baby is moving extensively and the display does NOT show strong movement, set higher sensitivity. Set lower sensitivit

• Copyright 2012 iBabyGuard International www.iBabyGuard.com 8 4. BABY ACTIVITY STATUS INDICATION ON PARENT UNIT 4.1 Sleeping The display will be as shown when your baby is sound asleep. The baby breath movement count per minute (BPM) is indicated on the top right-hand corner. 4.2 Baby movement The display will be as

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 9 5.2 No breath movement No breath movement alarm is a mandatory alarm meant to inform parents / caregivers when no breath movement is detected from the baby. Alarm will be activated after 15 seconds of no breath movement detected. The activity status for your baby will be indicated as shown. Audio alarm will also be activated on the mat with the red LED blinking. WARNING: During no brea

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 10 5.4 Baby absence alert The baby absence alert is meant to inform parents / caregivers when the baby has rolled off or carried out of Infant Snooze or is not on the Infant Snooze The alert will be activated and the display will be as shown. HINT: This alert can be enabled or disabled with the alert enable button WARNING: There may be exceptional unknown situations eg. 1)where babies toss or rotate such that only part of their body lies on the Infant Snooze, 2) parent’s hands or elbows may pr

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 11 If the link is still not established after 5 minutes,  Press the power button once on the Infant Snooze.  Power on the Parent Unit WARNING: Alarm will be also activated on the Parent Unit when the Infant Snooze is switched off. 6.2 Manual pairing of Infant Snooze and Parent Unit To manually pair the Infant Snooze with another new Parent Unit outside the 5 minute connection window,  Power off the original Parent Unit  Turn off & on the In

• Copyright 2012 iBabyGuard International www.iBabyGuard.com 12 6.5 Error 1: Fiber sensor is broken The display will be as shown blinking when the fiber sensor is broken. Please contact your service center. 6.6 Error 8: Weight limit indication for the Infant Snooze The display will be as shown blinking to indicate high pressure, such as he

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 13 7. TROUBLESHOOTING AND FAQ Problem Possible cause Remedy False alarm  The baby may have excessive movement when the parent /caregiver is playing next to the baby or attending to the baby’s need (changing diapers, feeding, patting)  External event such as patting action, high vibration or motor-running activities near the Infant Snooze  Switch off the Parent Unit when the parent/ caregiver is attending to the baby. Switch it on again to continue monitoring when baby is asleep. No alarm tone  Ba

• Copyright 2012 iBabyGuard International www.iBabyGuard.com 14 Error codes (indicated on Parent Unit ) Possible cause Remedy E1  The fiber sensor is broken  Infant Snooze is no longer functioning. Please contact your service center. E8  High pressure, such as heavy weight on the Infant Snooze or the baby sitting up.

• iBabyGuard Infant Snooze Baby Sleep Monitor, Copyright 2012 iBabyGuard International www.iBabyGuard.com 15 10. LIMITED WARRANTY Your iBabyGuard™ Parent Unit is covered warranty for malfunction in the electronic parts only, for a period of 12 months from the date of the original purchase, when used in accordance with the usage condition provided with the unit. Malfunction due to misuse, not in accordance with the usage condition, will not be covered in the warranty. We will, at our discretion, repair or replace the p

More Instructions:

	iBabyGuard Infant Snooze Baby Sleep Monitor Operation & user’s manual 10-02-2024 30	DOWNLOAD
	iBabyGuard Infant Snooze Baby Sleep Monitor Operation & user’s manual 16-03-2023 44	DOWNLOAD

Related Products and Documents (Baby Monitor):

Comparable Devices:

Similar Resources:

• VTech VM311 (2 pages) Installation guideVM311VM311-13VM311-2VM311-23VM310VM310-13Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.Mount the baby monitorUse a pencil to mark two holes in parallel. Make sure they are the same distance apart as the wall mount at the bottom of the baby unit. Drill two holes in the wall (7/ …

• iBabyGuard Infant Snooze (31 pages) Copyright 2012 iBabyGuard International www.iBabyGuard.com iBabyGuard™ Infant Snooze Baby Sleep Monitor User Manual (Android Devices) …

• Philips AVENT AVENT SCD525 (252 pages) Register your product and get support atSCD525EN User manual 5BG Ръководствозапотребителя 20CS Příručkaprouživatele 37ET Kasutusjuhend 51HR Korisničkipriručnik 65HU Felhasználóikézikönyv 80KK Қолданушының нұсқасы 95LT Vartotoj …

• babymoov A014409 (2 pages) iOS ANDROIDCOMMANDES - CONTROLS - BEDIENELEMENTE - BEDIENINGSORGANEN MANDOS - COMANDOS - COMANDI - OVLÁDACÍ PRVKYСИСТЕМА УПРАВЛЕНИЯ - VEZÉRLÉS - COMENZI - STEROWANIEKONTROL - ΚΟΥΜΠΙΑA. ALIMENTATION B. BED FIXING SYSTEM C. SET UP APP AND CAMERAD. FUNCTIONING OF THE MAIN SCREENB1B2B311121378916171415561241031819C1C2iOS ANDROIDA01440 …

• SMART 433-CMU (12 pages) Pager433-CMUWireless Central Monitor and Nurse Call Paging SystemInstallation and Use Instructions+_A23-12V433-PGDCaegiver Pocket Pager with LCD Display433-PGCaegiver Pocket Pager433-NCWireless Nurse Call ButtonOptional AccessoriesWIRELESS CALL SYSTEMCALL REVIEWVOLUMELANGUAGEREPLACE / ADDRECORD/ ADDRESET1 2 3 4 5 6 7 8 9 1 011 12 13 14 15 1 …

• HumanTechnik lisa (28 pages) DBedienungsanleitungBlitzlampeSeite 2GBOperating InstructionsFlash lampPage 6FMode d’emploiLampe-flashPage 10NLGebruiksaanwijzingFlitslampPagina 14IIstruzioni per l’usoLampada flashPagina 18EInstrucciones de servicioLámpara de destellosPágina 22lisaHUMANTECHNIKBA_Blitzlampe_6spr_lisaKlein 09.04.2006 18:52 Uhr Seite 1 …

Comments, Questions and Opinions: