3Svision N1072 Operation & User’s Manual

Text of 3Svision N1072 User Guide:

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 107 - 9. After add new hostname, click Next to enter the next step. (Note: as you are using Dynamic DNS Free service; so you can ignore the information of Shopping Cart. 10. Please click Activate Services button to enable DDNS service. 11. The completion of the registration page is shown below. You can now use the DDNS service to your devices.

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 63 - Network Network Setting  IP Assignment DHCP DHCP (Dynamic Host Configuration Protocol) is a protocol that enables automatic assignment of TCP/IP information to the client. Each DHCP client connects to the DHCP server to access its network setting information, including IP address, gateway, and DNS server. The IP address of the camera is 192.168.0.20 by default when DHCP is "OFF". When you select "DHCP ON" and access the DHCP network environment, the camera will automatically send a

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 69 - UPnP (Universal Plug and Play) If you connect your camera to a router, IP allocator, or wireless AP, your camera will possibly be blocked by the NAT and can’t be located on the Internet. To penetrate the firewall, activate the supportive item- UPnP. The Link URL shows the external IP address and the port of the router. Enter the IP address in the Internet Explorer to penetrate the NAT.  UPnP Device Active: yes (enable)/no (disable) De

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 58 - Audio Audio Set the Audio mode from Full-Duplex, Half Duplex, Simplex-Speaker Only, Simplex-Microphone Only and Audio Off. Full duplex: Microphone and Amplifier using allowed of at the same time, or turning them off. Half duplex: Microphone or Amplifier using allowed of by manual switch. Simplex microphone only: Microphone use only is allowed. Simplex amplifier only: Speaker use only is allowed. Audio off: Turn the audio off; i.e. both of the microphone and speaker will be off. Audio in Codec: Select the type of Codec for audio encryption from G726/32, G711a, G711u and AMR. Gain: Set the Gain from 0, 25, 50

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 25 - Video Format It provides the triplex streaming, but it can use one streaming on the live view. The default setting is the MPEG H.264 (Main). Click the pull-down menu to select the video format from H264(Main Stream), H264 (Sub Stream) and Motion JPEG. Video Format H.264 (Main) H.264 (Sub) Motion JPEG

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 112 - NOTE： The video server can support 4 channels streaming to use it. Modify the cam number of URI link to change the channel. E.g. Channel 2: rtsp://xxx.xxx.xxx.xxx:554/cam2/h264-1 Step5: Try to connect Video server through the mobile phone Check the mobile phone can support the streaming media player and internet service, and then see the example operation as below: NOTE： Suggest using the wireless solution. It can provide the highest

• N1072 Box Network Camera 2 Megapixel + H.264 - 59 - PTZ PTZ Camera Port Setting Camera Driver: N1072 supports the PTZ control of those analog PTZ cameras use the drivers of Pelco-D, Pelco-P. Refer to the user manual of your PTZ cameras, and you will know which driver to select. Moreover, select the serial number (address) of the targeted PTZ camera for controlled setting. If the sel

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 57 - 2. The sensor of day/night switcher will be trigger automatically to set up the day/night mode within the hypothesis time. If the sensor remain detecting the blurring under the day/night switch mode, it will trigger the action till the image is crystal within the hypothesis time. The display of monitor will keep the last mode for 30minutes after 3 times between day/night switching and restart again.  Switching Delay: Set the time for switching delay from 0~15 Seconds.  AE Setting Backlight: Click Enable to set the backlight for the image. Slow Shutter: Set the Slow Shutter from OFF, X2, X4

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 120 - 12. Show the video stream on the mobile screen. 13. Tap the screen to display the detail information, and the APP can support the audio application. NOTE： If the software cannot receive the stream from the video server, please try to check the setting is correctly.

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 17 - Factory Reset N1072 provides a function for you to reset it to the factory default settings. If there is still system problems remain after rebooting, factory reset can return the camera to normal operation after resetting. The following diagram illustrates will show you how to reset the N1072 Box Network Camera. Reset the N1072 Box Network Camera to default settings, by pressing the reset button with a sharp object for 5 seconds.

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 36 - 3. Click the Up, Down, Left, Right and Home to adjust the camera direction. 4. Exit the preset setting page by click Update. 5. After select the number for preset, click Go. The camera will move to the area automatically as setup by the select number.

• N1072 Box Network Camera 2 Megapixel + H.264 - 56 - Sensor  Day/Night Setting: Set the mode for the Day and Night from Auto, Manual and External. You can also select Day/Night ambiguity suppression in Auto mode. DAY NIGHT NOTE： 1. Auto (Day/Night ambiguity suppression) is the default setting mode of Day and Night setting.

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 74 - Notification For a dynamic IP, you need to update the IP address every time when you connect to the camera via internet. This setting allows you to update the IP address by automatic notification of IP address change. Select one of the following three notice options to update the IP address:  SMTP Notification SMTP Notification: notification via SMTP mail server SMTP SendTo: the recipient, i.e. [email protected] SMTP Subject: mail subject  FTP Notification FTP Server: FTP Server name. FTP Port: FTP

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 80 - Application Setting The Application Setting menu lets you view the Application Setting for N1072 Box Network Camera and change the following setting: Event Event Trigger Event Server Motion Detection Blind Detection Privacy Mask Firmware Upgrade Factory Default Reboot Event N1072 Box Network Camera is the equipment with intelligent security management function. It ensure the security monitoring by authorized users to define th

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 132 - I can't control the camera to move up, down, right, or left smoothly. Delay might occur when you are accessing a video stream and remotely moving the camera horizontally. Where significant delay is identified when you move the camera horizontally or vertically deactivate the audio streams and/or reduce the size of the video stream... Camera Image Quality Camera has a problem focusing. • The lens might be contaminated with dust, fingerprints, or other dirt. Use a special cleaning cloth to clean the lens or adjust the focus manually. • Focusing might be impossible in some cases. If the object is too

• N1072 Box Network Camera 2 Megapixel + H.264 - 86 -  Alarm Input Setting Set the alarm input type between N.O.(Normal Open) and N.G. (Normal Ground). The N.G. means N.C.  Trigger Alarm output: Click Trigger to start the alarm. Click Clear to stop the alarm. (Please make sure before you click Clear for close the alarm testing when the trigger testing is done). 

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 64 - Services It can become the small FTP server to download the AVI or JPEG file from SAMBA or SD Card. The default status is enabling the function. Due to the function only provide the SAMBA and SD Card applications, not release to all FTP setting for user. The default account and password is ftp, and you can only modify the password by yourself.

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 127 - Please see the detailed steps to Set up the Multicast function as below: 1. First, check the LAN environment has the device of IGMP service. 2. Enter the device then enable the service. 3. Login the video server then enter the Setting mode. 4. Click Multicast button from Network. 5. According to the requirement, select the streaming type to enable the function. IGMP

• N1072 Box Network Camera 2 Megapixel + H.264 - 27 - Streaming It provides 3 kinds of different streaming protocols. Click the pull-down menu to select the video format from UDP, TCP, and HTTP to apply or integrate on different requirement and environment. The following tables show the difference between UDP, TCP and HTTP. Differences Tunneling Pocket Loss Speed Protocol

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 125 - H264 (Sub) The setting is the same with the H264 (Sub). NOTE： Suggest using the default parameter to use the multicast function. Please make reference to the chapter of Basic Setting > Network > Multicast for further detailed description. Enable Click On or Off selection to enable or disable the function. Video Address Set up the IP address to transfer the Video package. The default setting is 224.1.1.2. Video Port Set up the Port to t

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 31 - Alert Message It will display the event message when receiving the event. And some controls and applications will be available. Please see the detail illustration as below: Alert Message Text Display the message in the field of the Alert Message Text when the event is activated. The event message format as below: Event Type Date Time Motion MM/DD/YY HH:MM:SS Alarm MM/DD/YY HH:MM:SS For the detail information, please double click the event message at the alert message text field and a pop-up window of the alert message will be shown. NOTE： The event type will be diff

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 111 - Step4: View limit Setting According to the requirement, you can pass the live view limit. Please see the illustration as below.  With password Don’t need to enable the “anonymous login” function, but you need to input the account information every login. The application can keep the video server privacy. e.g. Input rtsp://xxx.xxx.xxx.xxx:554/cam1/3gpp?user=root&pwd=root in mobile phone. The “-2” mean the sub stream.  Withou

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 68 - DDNS (Dynamic Domain Name Server) The IP address (Ex. 210.168.0.22) is like a telephone number, while the website address is like a name in an address book. The DDNS allows the user to access the website by entering the name of the website without memorizing a bunch of cold numbers. When you apply for an Internet service, you will have at least one IP address from your ISP that is either fixed or dynamic. Most of the ADSL service providers will give you a dynamic IP for ADSL environments, which means your IP address will constantly change each time you connect

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 91 - Blind Detection Blind Detection means that you can set the inside/outside area for detect. Blind Detection triggered if any object activity in the area that you have set. Click the Area to open the setting frame and the setting frame will show on your screen. You can adjust the frame size by move and drag the edge of the frame on the arrow of your mouse, after adjusted click the left button of your mouse.  Area: There are 3 frames available for setting: Area 1, Area 2 and Area 3. Cl

• 3Svision N1072, N1072 Box Network Camera 2 Megapixel + H.264 - 23 - Product Name Display the product name. The default name follows the product, and it not releases the permission of modification to customer. Mode Select the display mode between Live View and Setting. Product Name Live View Setting

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Lorex LH060 Series (2 pages) cBefore You Start:• Make sure you have a router and high-speed Internet access (not included). LH060 SERIES Congratulations! You can now view video from your cameras on your PC or Mac.• Connect your DVR to your router using an Ethernet cable (see the Quick Connection Guide for details). • Upgrade your DVR firmware and client software or mobile a …

• Vicon SVFT-PRS22E (44 pages) Vicon Part No. 8009-8163-11-00 Section 3 Rev 1006 XX163-11-00 SVFT-PRS Pressurized Dome Housing Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or per …

• QSI 600 Series (61 pages) 1 600 Series User Guide Revision 4 July 2019 Disclaimer: The specification in this document are subject to change without notice. All trademarks are properties of their respective owners, and are used herein for informational purposes only. Quantum Scientific Imaging Phone +441603 740397 …

• TP-Link VIGI (2 pages) Product OverviewHard Drive InstallationQuick Installation Guide8 Channel Network Video RecorderPackage ContentsVIGI Network Video Recorder Network Video Recorder Quick Installation GuideMousePower Adapter HDD Screws8 Channel Network Video RecorderLANHDDPOWERUSBNetwork Status IndicatorHard Disk Drive IndicatorPower Status IndicatorOnOnONetwork is working p …

• INSTEON 2864-222 (2 pages) Connect your camera to power and your router. You won’t need ethernet after setup.Branchez votre caméra à une source d'alimentation C.A. et à votre routeur. Vous n'aurez pas besoin d'Ethernet après la configuration initiale.12After setting up Insteon Hub, open the Insteon for Hub app and select Add a Camera.1Après avoir configuré le co …

• Kraun KW.01 (36 pages) Manualwww.kraun.comWarningThe manufacturer is under no circumstances liable for any unauthorised modifications made to the product by the user or any other parties which may compromise its conformity and safety.Cod. KW.01 (Wired)Cod. KW.02 (Wireless)User’s ManualIP Camera VGA …

Comments, Questions and Opinions: