Eatel FiberEdge Operation & User’s Manual

Text of Eatel FiberEdge User Guide:

• Eatel FiberEdge, Using Settings Use the PPV settings to change your PPV PIN and view PPV purchase information. For complete details and instructions, please refer to pages 62 – 65. Pay Per View (PPV) Control basic operations of your STB such as selecting the output channel that your TV uses to receive video programming (Set: Output Channel). Set Turn your STB automatically on or off at specified times. Timer Use the viewer settings to select your favorite channels for quick viewing. Viewer General Settings (Continued) At any point within the General Settings menus, you can press the INFO button on your re

• Eatel FiberEdge, 6 Set-Top Box (STB) Safety Liquid or Moisture Do not expose your STB to liquid or moisture. Do not place your STB on a wet surface. Do not spill liquids on or near your STB. Accessories Do not use accessories with your STB unless recommended by EATEL. EATEL recommends that you connect your cable equipment and associated electronic devices to a surge protector. Power Sources, Grounding and Power Surges Use only power sources with the correct voltage and frequency as specified on the label of your STB. Consult your local power company if you are unsure about the power s

• Eatel FiberEdge, 76 Select Picture Mode for Normal Viewing After you use the HDTV Setup Wizard to select all the HDTV picture formats you want to use, you need to choose a General Settings picture mode for normal viewing. If you do not have your HDTV connected to the HDMI connector on the back of the 8300HD DVR, then Pass-Through mode is recommended for normal viewing. Pass-Through mode allows non-HD channels to be displayed using their native picture formats, which can improve picture quality on non-HD channels. To select Pass-Through mode

• Eatel FiberEdge, 64 Controlling Live TV Control a Live Program You are Watching The following buttons on your remote control can be used to control a live program using your DVR: Rewind , Fast-Forward , Play , Instant Replay , Live and Pause . Rewind and Fast-Forward While in normal play mode, press Rewind or Fast-Forward to cycle through three different speeds of Rewind or Fast-Forward. Frame-by-Frame To reverse or advance one frame at a time, press Pause and then repeatedly press Rewind or Fast-Forward. For example, to advance three frames, press Pause and then press Fast-Forward three times. Slow Motion (Play) To see the action in slow motion, press Play from n

• Eatel FiberEdge, 8300HDC Back Panel Overview 39 1 Cable In Connects to the coaxial cable coming from the wall. 2 Cable Out Connects to a coaxial cable that sends analog audio and video signals to a TV or VCR. These signals are standard-definition TV (SDTV) video and stereo audio. 3 HDTV Connects to the component video input (YPbPr) on the HDTV, when in HD mode. When in SD mode, the Y/V portion of the component video output connects to the composite video input of a TV. 4 Digital Audio Out Connects to an RCA cable that sends a digital audio signal to a surround-sound receiver or other digital audio device. 5 Out 2 (Secondary C

• Eatel FiberEdge, 13 Continued on Next Page Introduction to the IPG The Interactive Program Guide (IPG) is a convenient TV listing tool built right into your EATEL FiberEdge TV service. Complete program listings for the next seven days include program name, episode title, rating and other available details. The IPG allows you to: • Browse listings by program title, channel or theme • Scan current and future programs on other channels without leaving your current program • Start recording a program immediately using the “Quick Record”

• Eatel FiberEdge, 25 Continued on Next Page Use the block settings to set up your Parental Control preferences. For complete details and instructions, please refer to pages 71 – 77. Block Control what is displayed on the front panel of the STB when it is powered on and powered off. Display General Settings (continued) Use the language settings to select languages for second audio programming (SAP) for digital channels and text for screen displays. The default language is English. Language: Screen Use this fe

• Eatel FiberEdge, 53 Continued on Next Page Parental Controls The Parental Control feature allows you to block programs that may be unsuitable for younger viewers. Activating the Parental Control feature involves three initial steps: 1) Enabling a blocking PIN (a 4 digit number). 2) Enabling blocking by channel, rating or time of day. 3) Turning on the Parental Control feature. All three steps are covered in detail in this section. Once Parental Control has been activated, blocked programs can only be viewed by entering a PIN. A padlock symbol in the IPG indicates that a ch

• 17 Continued on Next Page Browsing by Channel Browsing by Channel is the default setting for the Main Program Listing. As soon as you access the IPG by pressing the Guide button on your remote, you will see the Main Program Listing for the next two hours, organized by channel. Navigating within the program listing: • To highlight in the listing the program you are watching, press

• > What happens if my DVR loses power temporarily? Everything you have recorded is saved, based on the save time you selected in the Confirm Recording screen. Your scheduled recordings during the time the DVR lost power are the only recordings you may miss. > Do my Parental Controls in the Program Guide carry over to DVR recordings? Yes. Blocked programs c

• Eatel FiberEdge, 1 Serial Number Located in the left corner of the bar code. EATEL may ask for this number if your system requires troubleshooting. 2 1394 FireWire* Connect to optional 1394-equipped (FireWire) devices. This connector is reserved for future use and may not be available on all 3250HD models. 3 Optical Audio Out* Connect an optical cable to send a digital audio signal to a surround-sound received or the digital audio device. This connector may not be available on all STB models. 4 DVI* Connect to the DVI (Digital Video Interface) input port on your HDTV. This port provides digital video signals to the HDTV. 5 IR* Connect the

• Eatel FiberEdge, 4250HDC Back Panel Overview 1 Cable In Connects to a coaxial cable that delivers the signal from your service provider. 2 Cable Out Connects to a coaxial cable that sends analog audio and video signals to a TV or VCR. These signals are standard-definition TV (SDTV) video and stereo audio. 3 HDTV Connects to the component video input (YPbPr) on the HDTV, when in HD mode. 4 Digital Audio Out Connects to an RCA cable that sends a digital audio signal to a surround-sound receiver or other digital audio device. . 5 Out 2 (Secondary Video/Audio Out) Connects to either a VCR or to another set of inputs (composi

• Eatel FiberEdge, 57 Continued on Next Page Blocking by Time of Day You can block programs in a particular time range, for a single day, a range of days, or a day of the week such as every Saturday. You can set up blocks by time of day for a maximum of 14 days in the future. To block by time of day: 1. Press the Settings button on your remote twice. This will bring you to the General Settings menu. Use the Up or Down arrow buttons to locate and highlight “Block: Time New.” 2. Press the Select button . 3. Enter your Parental Cont

• Eatel FiberEdge, > No color • Make sure the current TV program is broadcast in color. • Adjust the TV color controls. > STB does not work • Verify that the STB is plugged into an electrical outlet that is not controlled by a wall switch, OR if the electrical outlet is controlled by a wall switch, make sure the switch is in the ON position. • Verify that all cables are properly connected. > Channel banner displays “ ??? ” instead of the channel number • Press the INFO button on the remote control. You may have pressed the Power button before all of the data for the IPG was received by the STB. > TV screen displays a message indicatin

• Eatel FiberEdge, 49 Continued on Next Page When a call comes in as you’re watching TV, a small graphic with Caller ID information will appear before your phone rings. The screen will show the caller’s name and telephone number (if available), along with two control options. Use your STB remote to make your selection: Using TV Caller ID While Watching TV > Press to clear the Caller ID information from the screen (This simply removes the information from your screen. Incoming caller information will be stored in a call log. See “Incoming Calls Log” on page 68 for details.) OR > Press to disable TV Caller ID (See “Turning TV Caller ID On or Off” on page 68 for instruction

• Eatel FiberEdge, 54 Enable Your Parental Control Blocking PIN To enable your parental control blocking PIN: 1. Press the Settings button on your remote twice. This will bring you to the General Settings menu. Use the Up or Down arrow buttons to locate and highlight Block: PIN. 2. Press the Select button . 3. Press the Select button again to enable the PIN. 4. Enter a 4 digit number combination that will be your Parental Control PIN. 5. Re-enter your PIN to confirm. 6. Press the Exit button to return to watching TV. Change Your Parental Control Blocking PIN To change your parental

• Eatel FiberEdge, 14 Parts of the IPG • Current Information appears in the upper right-hand corner of your screen. The program you are currently watching is reduced to fit in a small frame of the IPG (also known as the quarter screen), with the current channel (if available), date and time listed below. • The Channel Banner appears in the upper left-hand corner of the screen and includes a description of each program you highlight in the main program listings (see the following page for a complete list of symbols used in this se

• Eatel FiberEdge, 52 Duration of Caller ID Display on Your Screen The default setting for the TV Caller ID display is 15 seconds. However, this setting can be adjusted. Changing Your Caller ID Display Duration To change Caller ID display duration: 1. Tune to Channel 411. 2. Use the Up or Down arrow buttons on your remote to scroll to “Settings” and press the Select button . 3. Use the Up or Down arrow buttons to scroll to “Caller ID Settings” and press the Select button . 4. Use the Up or Down arrow buttons to scroll to “Set Caller ID Display Duration” and press the S

• Eatel FiberEdge, If your STB does not perform as expected, the following tips may help. If you need further assistance, contact EATEL. > No picture/No Sound • Verify that your TV, STB and other components are plugged into an electrical outlet that is not controlled by a wall switch. • Verify that all cables are properly connected. • Verify that the power to your TV is turned on. • If your system includes a VCR and/or stereo, verify that you have properly connected them to the STB. • Verify that your TV is tuned to the proper output channel (3 or 4). • Verify th

More Instructions:

Eatel FiberEdge Operation & user’s manual 24-03-2023 4

DOWNLOAD

Related Products and Documents (TV Receiver):

Comparable Devices:

Similar Resources:

• Haier 25F9K-T (32 pages) COLOUR TV RECEIVER OWNER'S MANUALMAIN FUNCTIONSPlease read this manual carefully before operating the unit, and keep it for future reference. Slide Curtain Power On/Off Display218 Channels PresetMultiple Picture & Sound Modes On/Off TimerChild Lock Soft Change Channel FunctionCount TimeChannels AppointmentDVD Video Component Input Terminals25F9K/ …

• Televes ZAS HD Satellite (24 pages) Ref. 717501www.televes.comSATELLITEESReceptor Satélite de Alta De nición Guía rápidaENHigh De nition TV Satellite ReceiverQuick guideFRRécepteur Satellite Haute Dé nition Guide rapidePTReceptor de Satélite de Alta de nição Guía rápidaITDEPLRicevitore satellitare HDHDTV SAT-ReceiverAdapter HD SATGuida veloceKurzanleitungSkrócona instru …

• TiVo Premiere (5 pages) Swap© 2010 TiVo Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. TiVo, the TiVo logo, and TiVo Central are trademarks or registered trademarks of TiVo Inc. or its subsidiaries, 2160 Gold Street, P.O. Box 2160, Alviso, CA 95002-2160. Using Your TiVo® Remote ControlYour TiVo remote control can be used for m …

• Haier LE55D20FM (24 pages) MODEL:LE55D20FMLED TV RECEIVERUSER MANUALPlease read this manual carefully before using your television and keep this manual in a good place for future reference. …

• Vidyo HD-100 (2 pages) 1237[SELFVIEWMUTE,@-.:/_MANAGECONNECTStart meeting from the homepage. ARROWS / OK Use the arrow keys to navigate on-screen. The option you navigate to will be highlighted in green when activated. Press the OK key on the remote to select the option on-screen.VOLUME / MUTE / SELFVIEW / ZOOM Volume — Not applicableMute — Not applicableSelfview — Cycles t …

• Haier L1509-A (26 pages) USER'S MANUALLCD TV RECEIVERPlease read this manual carefully before using your television and keep this manualIn a good place for future reference.MODEL:L1509-A, L15A09A, L1709-A, L17A09, L1909-A, L19A09, L2009-A, L20A09, L1510A-A, L15A10A, L1910A-A, L19A10A, L1510B-A, L15A10B,L1910B-A, L19A10B, L1911W-A, L19A11W, L2011W-A, L20A11W, L1912W-A,L19A12W, …

Comments, Questions and Opinions: