Ecoair ECO918SD Installation And Operation Manual

Text of Ecoair ECO918SD User Guide:

• Ecoair ECO918SD, Install outdoor unit Electric wiring Disassemble the handle on the outdoor unit 1. right side plate. 2. Take off cord anchorage. Connect and fix power connect cord (for cooling and heating unit, connect and fix power connect cord and signal control wire)to terminal block. 3.Fix the power connection cable with cord anchorage, (for cooling and heating unit, use the cord anchorage to fix the power connection cable and the signal control wire). 4. Ensure wire has been fixed well. 5. Install the handle. NOTE: ● Wrong wiring may cause spare parts malfunction. ● After fixing the cable, make sure there is free spac

• Ecoair ECO918SD, Operation of remote control Names and functions of remote control buttons NOTE: This remote control may have some buttons that are not available to your model. FAN AUTO OPER AIR HEALTH X-FAN HUMIDITY FILTER TURBO HOUR ON/OFF ON/OFF MODE FAN Remote control X-FAN TEMP TIMER TURBO SLEEP LIGHT HEALTH SAVE ● HEALTH function: press the left part of this button to turn “Cold Plasma” function on and off. ● SAVE function: Under Cool mode, press the right part of this butto

• Notices for use Working principle and special functions for cooling Principle: The air conditioner transfers heat from the indoor area to the outdoor area, thus reducing the indoor room temperature, using heat pump technology. Anti-freezing function: In COOL mode under low ambient temperature, frost will form on the heat exchanger. When the indoor heat exchanger temperature

• Ecoair ECO918SD, BS Plug Wiring (For models up to 12000 Btu) Wiring Instructions: Should it be necessary to change the plug please note the wires in the mains lead are coloured in accordance with the following code : BLUE - NEUTRAL BROWN – LIVE GREEN AND YELLOW - EARTH As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked with the letter N or coloured BLACK. 2. The BROWN wire is the LIVE and must be connected to the terminal which is marke

• Ecoair ECO918SD, Names and functions of each part Indoor unit Air in ⑴ ⑶ ⑹ ⑸ ⑷ Air out ⑵ Wireless remote control Cool Dry Heat Power ON/OFF Receive window ⑺ (1) Power cable (2) Remote Control (3) Front panel (4)Filter (5)Guide louver Outdoor unit (6)Wall pipe Air in (7)Bind tape (8)Drainage pipe ⑻ Air out 5

• Ecoair ECO918SD, WARNING: Before operating your unit Make sure the wiring is adequate for your unit. Before you install or relocate this unit, be sure that the amperage rating of the circuit breaker complies with the amp rating listed in Figure 1. DO NOT use an extension cord. The cord provided will carry the proper amount of electrical power to the unit; an extension cord will not. Make sure that the Power Supply is compatible with the air conditioner. Safety Precautions Input Rated Amp WARNING Electrical Shock Hazard Always consult a qualified electrician regarding the power supply to the appliance. Do not use plug adapters

• Ecoair ECO918SD, Congratulations! You have purchased the very latest in room air conditioner technology. Your new EcoAir high efficiency room air conditioner will give you many years of dependable service. Many features have been built into your EcoAir air conditioner to assure quiet operation, the best circulation of cool, dry air, functional controls, and the most economical operation. CONTENTS Operation and maintenance ■ Notices for operation.................................................................... 1 ■ Notices for use ..................................................

• Ecoair ECO918SD, Troubleshooting Troubleshooting Problem  Has the power been shut down? The unit is not running.  Is power connected properly?  Is the circuit protection device tripped off or not?  Is voltage higher or lower? (Tested by professionals) Breaking off  Is the TIMER correctly used?  Is Temp. setting suitable? Cooling(Heating) efficiency is not good.  Were inlet and outlet vents obstructed?  Is filter dirty?  Are the windows and doors closed?  Is the Fan speed set at low speed?  Is there any heat sources in the room?  The un

• Ecoair ECO918SD, Notices for installation Important Notices 1.Installation work must be done by competent or qualified persons according to local rules and this manual. 2.All electric supply to the unit must be carried out by qualified electrician. 3.Reinstallation of the unit must be carried out by qualified persons. 4.The appliance must be positioned so that the power supply is accessible. Basic Requirements For Installation Position Installations in the following place may cause malfunctio

• Ecoair ECO918SD, Emergency operation Display indicator light control of indoor unit It's a special selective button for the users, who are not accustomed to the light at sleeping. ● Get the display indicator light on: When setting the light function,the mark will display on the remote controller screen by pressing this button. In which case, the diss- player indicator light will be on if the AC receives this signal. ●Get the display indicator light off: If cancel the light function,the mark wil

• Ecoair ECO918SD, Operation of remote control Guide for operation-general operation 1.Press ON/OFF button to start the unit after powering the main unit on.(Note: The big -guide louver and small-guide louver will close automatically during Power on). 2.Press MODE button to select desired running mode. 3.Press +/ - button to set the desired temperature . (You cannot set the temperature in AUTO mode, it is preset) 4. Press FAN button to set fan speed, (AUTO FAN, LOW, MID or HIGH). 5. Press and button to set swing mode. ( button only for some models) ON/OFF MODE FAN X-FAN TEMP TIMER TURBO SLEEP LIGHT Guide f

• Ecoair ECO918SD, Installation and Maintenance of Healthy Filter Installation Instructions 1. Forcibly pull the panel for a specific angle from the two ends of the front panel according to the arrow direction. Then pull the air filter downwards to remove it. (See Fig. a) 2. Mount the healthy filter onto the air filter, ( as shown in Fig. b). If the air filter cannot be in- stalled, please mount the healthy filter on the front case. (as shown in Fig. c) 3. Mount the air filter properly along the arrow direction in Fig. d, and then c

• Ecoair ECO918SD, Installation dimension diagram Installation dimension diagram Space to the ceiling Above Above Space to the wall Above Above Air outlet side Space to the floor ● The dimensions of the space necessary for correct installation of the appliance including the minimum permissible distances to adjacent structures Space to the wall Above Space to the obstruction Above Space to the wall Above Air outlet side Above Air inlet side Above Space to the wall Above

• Operation of remote control Names and functions of remote control buttons Note: Ensure there is no obstruction between the indoor unit and the remote control; Don't drop or throw the remote control; Don't spill any liquid onto remote control. Do not put the remote control directly under the sunlight or heated areas. Signal transmitter FAN AUTO OPER

• Ecoair ECO918SD, Check after installation and test operation Check after installation Items to be checked Has it been fixed firmly? Have you done the refrigerant leakage test? Is heat insulation sufficient? Is water drainage well? Is the voltage in accordance with the rated voltage marked on the nameplate? Is the electric wiring and piping connection installed correctly and securely? Has the unit been connected to a secure earth connection? Is the power cord specified? Is the inlet and outlet been covered? Is ventilation sufficient? Has the le

• Ecoair ECO918SD, Notices for installation Outdoor Unit Installation Position Selection 1.Select a location from which noise and outflow air emitted by unit will not be a nuisance to neighbours, animals or plants. 2.Select a location where there should be sufficient ventilation. 3.Select a location where there should be no obstructions to the inlet and outlet vent. 4.The location should be level and able to withstand the full weight and vibration of the outdoor unit and permit safe installation. 5.Select a dry place, but do not expose under the direct sunlight or strong wind. 6. The outdoor unit should be install according to the in

• Ecoair ECO918SD, ONE (1) YEAR LIMITED WARRANTY SAVE THIS WARRANTY INFORMATION EcoAir guarantees this product free from defects in materials and workmanship for a period of one (1) year from the date of purchase, limited to parts only. Faults arising from a faulty installation is specifically excluded. This unit must be operated under conditions as recommended, at voltages indicated on the unit. Any attempts made to service or modify the unit by unqualified technician, will render this WARRANTY VOID. The actual product may differ slightly from the illustration. This warranty is in addition to, and does not affect, your statutory rights. For after

• Troubleshooting CAUTION Don't attempt to repair the air conditioner by yourself, it can cause an electric shock or fire. Please check the following items before asking for repair, it can save your time and money. Problem Troubleshooting Not operate immediately when the air ● Once the air conditioner is stopped, it will conditioner is re

• Ecoair ECO918SD, Clean and care Check before use ① Be sure that nothing obstructs the air outlet and intake vents. ② Check that ground wire is properly connected or not. (Important) ③ Check that the batteries of the remote control changed if remote is not working. ④ Check that the installation stand of the outdoor unit is damaged or not. If damaged, please contact your installer. Maintain after use ① Turn main power off. ② Clean the filter, clean the indoor and outdoor units&

• Ecoair ECO918SD, Notices for use Working temperature range Indoor side DB/WB( o C) Outdoor side DB/WB( o C) Maximum cooling 32/23 48/ - 21/15 Minimum cooling 10/- Maximum heating 27/--- 24/18 Minimum heating 20/--- -15/- The operating temperature range (outdoor temperature) for cooling unit is 10℃ ~ 48℃； for cooling and heating unit is -15℃ ~ 48℃. 4

• Notices for operation ★The airflow direction can be adjusted appro- ★ If the supply cord is damaged, it must be replaced priately. At operating, adjust the vertical airflow by the manufacturer or its service agent or a direction by adjusting the louvers of upward/do- similarly qualified person in order to avoid a wnward direction. And then, hold two ends of hazard. left a

• Ecoair ECO918SD, Install indoor unit Install the rear panel 1.Always mount the rear panel horizontally. The outlet of water tray should be adjusted slightly downward when installing to enable gravity flow of condensation externally. 2.Fix the rear panel on the wall with screws. . . . . (Where is pre-covered with plastic granula) . . . . 3.Be sure that the rear panel has been fixed . firmly enough to withstand the weight of an . adult of 60kg, further more, the weight should be evenly shared by each screw. . . Φ

Related Products and Documents (Air Conditioner):

Comparable Devices:

Similar Resources:

• Fujitsu AR 7 (26 pages) PART No. 9374342419-02EnglishFrançaisEspañolINSTALLATION MANUALAIR CONDITIONERINDOOR UNITSlim Duct Type For authorized service personnel only.Contents1. SAFETY PRECAUTIONS ............................................. 21.1. IMPORTANT! Please Read Before Starting ........... 21.2. Special precautions ................................................ 22. ABOU …

• Maytag 23-11-2234N-004 (20 pages) Room Air Conditioner • DehumidifierAcondicionador de Aire • DeshumedecedorClimatiseur • DeshumidificateurWrite down the model and _serial numbers _]Use these numbers in any correspondence orservice calls concerning your air conditioner.Keep your store receipt.Escriba los nt_meros delmodelo y de la serieUtilice estos nt;u_lerosen cualquiercorrespondenci …

• Giatsu VIOLET UV GIA-S12VIOUV (18 pages) GIA-S09VIOUV | GIA-S12VIOUVGIA-S18VIOUV | GIA-S24VIOUVESENFRPTITINSTALLATION MANUALPor favor lea atentamente este manual antes de usar este producto. Please, read carefully this manual before using the product.Avant d’utiliser l’équipement, lisez attentivement les instructions.Por favor leia atentamente este manual antes de usar o equipamento.Per favore …

• S.S.Green TKF-26GW/BP (11 pages) TKF(R)-26GW/BP ( 9000BTU )TKF(R)-35GW/BP (12000BTU)TKF(R)-50GW/BP (18000BTU)TKF(R)-70GW/BP (24000BTU)TKF(R)-100GW/BP (36000BTU)TKF(R)-120GW/BP (41000BTU)TKF(R)-140GW/BP (48000BTU)SOLAR AIR-CONDITIONEROPERATION AND INSTALLATION INSTRUCTIONS …

• Daikin FCQ18PVJU (15 pages) EnglishFrançaisEspañolOPERATION MANUALSPLIT SYSTEM Air ConditionersMODELSCeiling-mounted Cassette type (Multi fl ow model)FCQ18PVJUFCQ24PVJUFCQ30PVJURead these instructions carefully before installation.Keep this manual in a handy place for future reference.This manual should be left with the equipment owner.Lire soigneusement ces instructions avant l� …

• LG LW8016HR (30 pages) www.lg.comEN ENGLISH*MFL70559721*Copyright © 2020 - 2021 LG Electronics Inc. All Rights ReservedMFL70559721Rev.06_110621AIR CONDITIONERRead this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times.OWNER’S MANUALTYPE : WINDOWLW8016HRLW8021HRSM …

Comments, Questions and Opinions: