Manualios.com

Canary Systems Raven II CDPD Manual 

Canary Systems Raven II CDPD Manual Online:

3.1, 2556 votes
Canary Systems Raven II CDPD User Manual
Canary Systems Raven II CDPD User Guide
Canary Systems Raven II CDPD Online Manual

Text of Canary Systems Raven II CDPD User Guide:

  • Canary Systems Raven II CDPD, Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 1 of 8 5 Gould Road, PO Box 2155 New London, NH 03257 USA Voice: (603) 526-9800 [email protected] www.canarysystems.com Using the RAVEN II CDPD Modem Application Note #12 Overview This Application Note provides information to setup and configure your AirLink CDPD Raven II Modem, as well as configuration information to setup and configure MultiLogger to communicate with your data acquisition system using this modem. CDPD is a technology used to transmit packet data over cellular voice networks. It is ideal for w

  • Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 2 of 8 Raven II Configuration The Raven II Modem is usually configured using the Wireless Ace software from Airlink. This software is available without charge from Airlink at the following link: www.airlink.com/ace Configuration consists of setting the values of a series

  • Canary Systems Raven II CDPD, Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 3 of 8 COM/IP Installation and Configuration MultiLogger cannot communicate directly to the Winsock, or TCP/IP, port of your operating system, therefore a type of interface software will be required to facilitate communication between MultiLogger and the Winsock port. This Application Note will provide information to utilize COM/IP, from Tactical Software. This software may be downloaded from a distributors website, go to the following link: htt

  • Canary Systems Raven II CDPD, Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 4 of 8 The following screenshots illustrate the Install New Modem forms of Windows (these are captured from a Win2K installation, other Windows version will look slightly different).

  • Canary Systems Raven II CDPD, Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 5 of 8 After installation of COM/IP and the Modem you will see the COM/IP program display. The last installation step for COM/IP is to configure the InitiString, shown above. This must be set to the Port that will be used, in conjunction with the IP, to access the Raven II Modem. The default setting is 3001, enter as ATS1009=3001, as shown below. Installation and configuration of COM/IP is complete! You will see the COM/IP icon in your System

  • Canary Systems Raven II CDPD, Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 6 of 8 MultiLogger Configuration Configuration of MultiLogger is straightforward, the Network Configuration needs to be updated to include the COM port, in our case COM5, a Phone Modem and the Control Module connected to the Raven II Modem. All the defaults should work fine, except the Extra Response Time for the Control Module, this could be set to 5000 to allow for delays that are common when using the Raven II. The IP of the Raven II Modem must be entered in the Dialed Using Phone Number edit of the Control Module edits, an example of the se

  • Canary Systems Raven II CDPD, Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 7 of 8 Troubleshooting Windows includes utility programs that can be used to quickly and effectively troubleshoot the connection to the Raven II equipped datalogger. The first is PING, a utility for checking whether a connection is possible to the Raven II. This will also verify that the service is properly activated and that the modem is configured and responding. First open a DOS or Command Prompt window. Type PING, followed by the IP that has been provided by the service provider and has been programmed into the mo

  • Using the Raven II CDPD Modem – Canary Systems Application Note #12 – March 2002 – Page 8 of 8 You should now be able to send and receive commands from the datalogger. The simplest test is to press <ENTER> a few times and see the asterisk attention prompt returned by the system. If the prompt is returned then the connection is functional. At t

Related Products and Documents (Modem):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Groen TDB Operator's manual groen/tdb-ZO5.pdf 31 Oct 2023 28 2.12 Mb
2 Ikelite S95 Supplemental instructions ikelite/s95-39M.pdf 18 May 2023 8
3 Danfoss ECtemp 535 Operation & user’s manual danfoss/ectemp-535-Y72.pdf 02 Oct 2023 24
4 Craftsman 247.88355 Operator's manual craftsman/247-88355-C3M.pdf 14 Aug 2022 64 4.83 Mb
5 HP P2000 Configuration manual hp/p2000-Z63.pdf 23 Mar 2023 5 0.84 Mb
6 Fishman CONCERTMASTER Manual  fishman/concertmaster-NO8.pdf 12 Mar 2024 8 1.55 Mb

Similar Resources:

  • Motorola

    SB4200 - SURFboard - 38 Mbps Cable Modem

    (2 pages)
    SB4200 Cable Modem InstallationOREthernetResetbuttonUSBTMUNIX users must open User Guide(SB4200.pdf) located in Acrobatfolder on CD-ROM.High Speed Access to the InternetLINKACT100USBCABLEPOWERSB4200User Guide …
  • Black Box

    ME570A-MST-R2

    (23 pages)
    CUSTOMERSUPPORTINFORMATIONOrder toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018Web site: www.blackbox.com • E-mail: [email protected] 2001ME570A-MST-R2ME57 …
  • xG Technology

    CN3100-PS-2500-900-1-EXT

    (35 pages)
    3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 Certification Exhibit FCC ID: VEYXVMR1 FCC Rule Part: 15.247 ACS Project: 15-2067 Manufacturer: xG Technology, Inc. Model: CN3100 User Manual …
  • D-Link

    DSL-G604T

    (19 pages)
    Before You Begin Make sure you have all the necessary information and equipment on hand before beginning the installation. DSL-G604T Wireless ADSL Router This product can be set up using any current web browser, i.e., Internet Explorer 6, Netscape Navigator 6.2.3, Mozilla or Firefox. Check Your Package Contents …
  • Zte

    MF100

    (2 pages)
    ZTE MF100 HSDPA USB ModemQuick User GuideZTE Plaza, Keji Road South, Hi-tech Industrial Park, Nanshan District, Shenzhen, P.R.ChinaZip Code: 518057 Service Hotline: +86-755-26779999http://www.zte.com.cn E-mail: [email protected] ZTE MF100 HSDPA USB modem is a multi-mode, 3G USB modem, working in HSDPA/ UMTS/ …
  • Belkin

    F5U302ea

    (48 pages)
    F5U302eaWireless USB HubStart Here Quick Installation GuideThis guide will lead you through the basic steps needed to install the Belkin Wireless USB Hub. For further information or greater detail regarding installation, please refer to the Belkin User Manual for this product. ENFRDENLESIT …

Comments, Questions and Opinions: