Canon im2020 Setup Instructions

Text of Canon im2020 User Guide:

• Canon im2020, 9218 – 4 – 4348-7743-03 ■ Loading Paper 4348U103AA 4348U102AB 2. Install the Fixing Legs at two locations in the front shown in the illustration. (six screws) 3. Install the Fixing Leg Covers at two locations in the front shown in the illustration. (2 Pieces) NOTES • Insert the Fixing Leg Covers in the direc- tion shown by arrow until they click into position. • Insert the Protruded Portions of the cover shown by the arrows into the Fixing Leg. 4348U098AA ② ① ③ ① ② ③ 4. Install the Fixing Legs at two locations in the rear shown in the illustration.

• Canon im2020, im2020/im2520/im3520 – 1 – 4030-7744-02 ■ Setup Overview 4030U029AA   9216 9217 9218 9210 9219 9219000000 ZC35000709211 Mailbin Finisher* 9214 ZC3500060 Copier: Printer 9212 Memory *Not offered ZC3500130 ZC3500080 ZC3500110 ZC3500050 ZC3500080 Note: When setting up a system consisting of the copier and options, set up each system component in the order shown at right. ZC3500090 PCN  Description 9210 RADF 9211 Multiposition Stapling Finisher 9212 Punch Unit 9214 Saddle Stitch Finisher 9216 Plain Stand 9217 Copy Desk (550 x 2) 9218 Large Capacity Cassette (2700 sheets) 9219 Duplex

• Canon im2020, im2520f – 8 – 4032-7744-02 ■ Installing the Original Cover Kit • Check that the following items are contained. 1 Original Cover ........................................................................................1 2 Hinge Cover (Right) ...............................................................................1 3 Hinge Cover (Left)..................................................................................1 4 Document Scanning Glass Cover ..........................................................1 5 Screw .....................................................................................................5 4599U001AA 1 2 3 4 5 4599U00

• Canon im2020, 9211 – 6 – 4349-7741-02 5. Using Screw B, secure the ground wire. NOTE Make sure that the ground wire runs in the direction shown in the illustration when secured. 4349U034AB 6. Connect the connector. 7. Using Screw C, secure the ground wire. 4349U051AB 8. Using Screws C, secure the Secondary Cover in position (two screws). NOTE Make sure that there is a uniform clearance between the Misfeed Clearing Dial and Secondary Cover. 4349U036AC 9. Using Screw D, secure the Secondary Cover (one screw). 4349U037AA 10. Install

• Canon im2020, 9211 – 5 – 4349-7741-02 ■ Installing the Tray Unit 1. Make sure that the Paddle of the Finisher Unit is not advanced. 2. If the Paddle is advanced, push the solenoid shown and turn the Misfeed Clearing Dial to bring the Paddle into its retracted position. 10. Loosen the adjusting screw and move the Finisher Unit to the right or left as necessary (one screw). 11. After the adjustment has been made, tighten the adjusting screw. 4349U029AC 4349U031AA 4349U030AA Paddle <NG> <OK> 3. Mount the Tray Unit onto the Finisher Unit. NOTE Use utmost care to prevent the Tray Unit from contacting the solenoid an

• Canon im2020, im2520f – 4 – 4032-7744-02 9. Reinstall the Developing Unit Cover, ensuring that its tabs are fitted properly into the slits (three screws). 10. Align the shaft of the Developing Unit with the inner guide of the PC Drum Unit. 11. Slide the PC Drum Unit along the guide to check that the positioning pin is properly aligned with the mating hole. 12. Screw the PC Drum Unit in position (two silver screws each on the right and left sides). NOTE Use care not to touch or scratch the PC Drum. 6. Ready a packet of starter and cut off

• Canon im2020, ZC3500060 – 1 – 4030-7772-02 ■ Setup Overview 4349U045AA 9216 9217 9218 9210 ZC35000709211 Mailbin Finisher* 9214 ZC3500060 Copier: Printer 9212 Memory *Not offered ZC3500130 ZC3500080 ZC3500110 ZC3500050 ZC3500080 Note: When setting up a system consisting of the copier and options, set up each system component in the order shown at right. ZC3500090 9219 9219000000 PCN  Description 9210 RADF 9211 Multiposition Stapling Finisher 9212 Punch Unit 9214 Saddle Stitch Finisher 9216 Plain Stand 9217 C

• Canon im2020, 9217 – 2 – 4348-7747-02 ■ Unpacking NOTE When removing the 2 Way Paper Feed Cabinet from its shipping carton, do not hold onto the reinforcement bracket (indicated by the arrow in the illustration below) (as a personal injury or a deformed frame could result). 1. Check that the following items are contained in the Box of Accessories. 2. Remove protective tape from different parts of the Paper Feed Cabinet. 1 Fixing Leg...............................................................................................4 2 Fixing Leg Cover ..................

• Canon im2020, im2520f – 3 – 4032-7744-02 ■ Loading the Starter NOTE The starter is not shipped with the copier. Purchase one that is separately available. 2. Remove screws that secure the PC Drum Unit in position (two each on the right and left). * Silver screws found on the lower part of the PC Drum Unit 3. Slightly opening the lower part (the shadowed portion) on both sides of the PC Drum Unit, take out the PC Drum Unit. NOTE Do not touch or scratch the PC Drum. Cover the PC Drum Unit, which has been removed, with a protective cloth or similar tool. 4. Slide out the drawer and remove the protective tape. 4030U030AA 5. Turn the Scanner Lock Lever to unlock the Scanner. 6. Affix t

• Canon im2020, 9218 – 6 – 4348-7743-03 ■ Adjusting the Paper Reference Position 6. Touch “3rd Drawer.” (This highlights the “3rd Drawer” key.) 4348P017CA 7. Press the Start key on the control panel. (The copier will produce an output of a test print.) 4002O280CB 8. Measure width A on the test print and check to see if the measured dimension falls within the specified range. <Specifications: 10 ± 2.0 mm> 4348U054AA A 9. If the measured width A falls within the specified range, press the

• Canon im2020, 9210 – 7 – 4344-7741-01 ■ Checking for Registration ■ Adjusting Registration 1. Prepare a test chart (A3) as shown. * Draw a straight reference line at a point 20 mm from the rear edge and another at a point 20 mm from the top edge of the chart. 1166U014AA 20mm 20mm 2. Load the test chart in the ADF and make a full-size copy. 4344U021AA 3. Check that the margins reproduced on the copy meet the following specifications. Margin Registration Specifications: Width A: 20 ± 2.0 mm Width B: 20 ± 3.0 mm If the margins reproduced on the copy fall outside the specified range, make the “Registration Adjustment.” 1166U015AA 1. Call the Tech. Rep. Mode to the screen. (See t

• Canon im2020, – 14 – 4513-7746-02 • Registering one-touch keys 1. Press the [Utility] key. 2. Touch [User Set], [FAX Input], then [One-Touch]. (With the im2020, im2520 and im3520, touch [User Set], [Mail Input], then [One-Touch].) 3. Touch a key where nothing has been registered yet. 4. Type in the name of the one-touch key. 5. Select the communication mode. • Scan to E-mail : [PC] - [Email] • Scan to Server (FTP) : [PC] - [FTP Server] • Scan to PC (FTP) : [PC] - [FTP Client] • Scan to PC (SMTP) : [PC] - [Scanner] • Scan to HDD : [HDD] • Internet FAX : [InternetFAX] - [E-mail] • IP Address FAX : [InternetFAX]

• Canon im2020, 9210 – 2 – 4344-7741-01 ■ Unpacking 1. Check that the following items are contained in the Box of Accessories. NOTE When the Duplexing Document Feeder is to be installed at the same time that any of the following options is mounted, be sure first mount these options before installing the Duplexing Document Feeder: Data Terminal, Data Controller, and Hard Disk. ■ Installing the Duplexing Document Feeder 1 Shoulder Screw......................................................................................2 2 Decorative Screw ...................................................................................2 3 Document Pad ...................

• – 7 – 4513-7746-02 5. Specifying Machine Settings Priority Device Specify the print timing for received print jobs. 1. Press the [Utility] key. 2. Touch [User Set]. 3. Touch [User’s Choice]. 4. Touch [Priority Device] on tab 6/6. 5. Select either “Copier” or “Printer”, and then touch [OK]. Copier: Printing begins after the data for all pages of the print job is received. Printer: Pri

• Canon im2020, 9214 – 7 – 4511-7741-02 17. Loosen the screw shown, move it to the front, and then tighten it again. (1 screw) NOTE This step must be performed properly to prevent any trouble. Do not move the screw by using the Adjust Plate. Be sure to move the screw itself. 4510U020AD Adjust plate 18. Mount the Saddle Unit on the Finisher. NOTE Check that the tab of the Saddle Unit is below the tab of the Shutter. 4511U032AA 19. Using Screws C, secure the Saddle Unit to the Mounting Bracket (Left). (2 screws

• Canon im2020, 9219000000 – 1 – 4526-7741-02 ■Setup Overview 4625U021AA 9216 9217 9218 9210 ZC35000709211 Mailbin Finisher* 9214 ZC3500060 Copier: Printer 9212 Memory *Not offered ZC3500130 ZC3500080 ZC3500110 ZC3500050 ZC3500080 Note: When setting up a system consisting of the copier and options, set up each system component in the order shown at right. ZC3500090 9219 PCN  Description 9210 RADF 9211 Multiposition Stapling Finisher 9212 Punch Unit 9214 Saddle Stitch Finisher 9216 Plain Stand 9217 Copy Desk (55

• – 6 – ■ Connecting the Cables 1. Connect the IEEE1284 (Centronics) cable to the parallel connector on the copier, and then secure both connectors with the locking clips. 2. Connect the other end of the cable to the computer. ■ Specifying Settings for the Parallel Interface If necessary, specify the settings for the parallel interface from the copier’s control pa

• Canon im2020, – 1 – 4513-7746-02 1. Operating Environment Printer controllers (ZC3500080 and ZC3500130) operate under the following environment. *1 Can be used only with printer controller ZC3500130 *2 Windows NT4.0 does not support USB. 2. Check the package contents. The following accessories are included with the network interface card (ZC3500090). Before starting to set up, check that the appropriate accessories are included with the option. Network Interface Card (ZC3500090) 1. CLAN Circuit Board .....

• – 1 – ■Setup Overview 4347U001AA ZC3500070 – 1 – 4526-7741-02 9216 9217 9218 9210 ZC35000709211 Mailbin Finisher* 9214 ZC3500060 Copier: Printer 9212 Memory *Not offered ZC3500130 ZC3500080 ZC3500110 ZC3500050 ZC3500080 Note: When setting up a system consisting of the copier and options, set up each system component in the order shown at right. ZC3500090

• Canon im2020, 9212 – 2 – 4512-7741-02 ■ Unpacking • Check that the following items are contained in the Box of Accessories. ■ Installation NOTE It is recommended that the Punch Kit be installed to the copier before the Finisher is mounted to the copier. 1 Punch Unit..............................................................................................1 2 Sensor Unit ............................................................................................1 3 Punch Box............................................................

Related Products and Documents (All in One Printer):

Comparable Devices:

Similar Resources:

• Xerox WORKCENTRE 7425 (14 pages) WorkCentre™7425 / 7428 / 7435Colour Multifunction SystemWorkCentre 7425shown with Work Surface and Three Tray options.WorkCentre 7428shown with Work Surface, High-Capacity Tandem Tray and Office Finisher LX with Booklet Maker options.WorkCentre 7435shown with Work Surface, High-Capacity Tandem Tray and Professional Finisher options.WorkCentre 7425 WorkCent …

• Canon NP6621 (340 pages) FY8-13F4-000FEB. 1998COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)SERVICEMANUALREVISION 0Download service manual and resetter printer at http://printer1.blogspot.com …

• Ricoh Aficio 3025 (136 pages) Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=132 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 5.280000 mmOperating Instructions Copy ReferenceB2096608 Operating Instructions Copy ReferenceOperating InstructionsCopy ReferenceRead this manual carefully before you use this mach …

• BERTL Exeptional Copystar CS 520i (30 pages) www.BERTL.com Copyright © 2010 BERTL Inc. February2010All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or …

• Dell 5330 (207 pages) Mono Laser PrinterUser's GuideImportant: If your printer has a touch screen, see the User’s Guide on thePublications CD for information on using your printer.Machine type(s):4062, 4551, 4552, 4553, 4864, 5530Model(s):01A, 21A, 23A, 41A, 43A, 630, d03, dn, dn1, dn2, dn3, gd1, gd2, gm1, md1, mn1, n01, n02, n03, xn2 …

• Sharp MX-4100N (44 pages) BEFORE INSTALLING THE SOFTWARESETUP IN A WINDOWS ENVIRONMENTSETUP IN A MACINTOSH ENVIRONMENTTROUBLESHOOTINGDIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEMSoftware Setup GuideSoftware Setup GuideSoftware Setup GuideKeep this manual close at hand for reference whenever needed.MX-4100NMX-4101NMX-5000NMX-5001NMODEL:!mx4100_us_ins.book 1 ページ ２００８年７� …

Comments, Questions and Opinions: