Garrett SuperScanner Operation & User’s Manual

Text of Garrett SuperScanner User Guide:

• Garrett SuperScanner, GARRETT SUPERSCANNER Congratulations, on selecting the Garrett SuperScanner. The Garrett SuperScanner is an active hand-held metal detector designed to find metal (ferrous, nonferrous and stainless steel) weapons, contraband or other object carried on a person or concealed by non metal object. When used properly, it is extremely effective in detecting even the smallest objects. 2 - Garrett Metal Detectors

• Garrett SuperScanner, COMPONENTS COMPONENTS / FUNCTION SuperScanner - 3 Safety Sling Power Switch LED Alerts Battery Cover Earphone/ Recharger Jack Detection Area (Top and Bottom) Interference Elimination Button Audio Threshold Adjust

• Garrett SuperScanner, Power Switch - To turn the detector on, set the switch to the ON position. A brief audio and Red LED alarm will occur, indi- cating the unit is on. The SuperScanner is immediately ready for use. Audio Alert - The speaker provides a clear audible sound whenever metal is detected. When using the optional ear- phone accessory, the audio alert will only sound through the earphone. The Audio Alert also indicates battery condition. When approximately 10% of battery life remains, the sound when metal is detected changes from a warble to a steady tone. LED Array - When the Power Switch is turned on, the Green Light will remain illuminated, as long as the unit is on. When

• Garrett SuperScanner, on, indicating the battery needs to be replaced or recharged. Approximately one (1) hour of operational time remains when the amber LED is initially activated. Whenever metal is detected the Red LED Light will illuminate. Interference Elimination Button - The detector is factory set for maximum sen- sitivity to detect the smallest of items. This high level of sensitivity may produce alarms when approaching a floor con- taining rebar. Press and hold this button to decrease sensitivity to a level that does not respond to the rebar. Release button and detector returns to normal se

• Garrett SuperScanner, Do not attempt to recharge the conven- tional batteries. Attempting this will dam- age the detector. (See Accessories for Rechargeable Battery Kit.) Safety Sling - Used to assist the opera- tor in convenient handling of the SuperScanner. Battery Cover - Remains securely in place at all times but can be easily opened for changing the battery with no tools required. 6 - Garrett Metal Detectors

• OPERATING INSTRUCTIONS Turn the detector on by setting the Power Switch to the ON position. The Green Alert Light will illuminate and the Audio Alert will sound to indicate the unit has been turned ON. The Green Alert Light will remain on until the unit is turned OFF. When the SuperScanner is operating, it will detect metal only while it is in motion. Move the

• Garrett SuperScanner, SPECIFICATIONS Model Number: 1165180 Audio Frequency 2 kHz, Warbled Dimensions: Length: 16.5" (42cm) Width: 3.25" (8.3cm) Thickness: 1.62" (4.13cm) Weight: 17.6oz (499g) Voltage: 6.8 to 10 Vdc Current: 5 mA. typical Battery: Standard 9V (Eveready No. 216 or equivalent) or 7.2V Nickel Metal Hydride (NiMH) (rechargeable) 8 - Garrett Metal Detectors

• Environmental: Operating Temperatures: -35°F (-37°C) to 158°F (70°C) Humidity: To 95% noncondensing Environmental Protection: 1EC 60529 classification IP54 Note: Do not affix metallic labels (or any mate- rial that might cause the detector to alarm) to the detection area of the SuperScanner. Doing so might cause an imbalance within the detection field and thereby reduce scanning eff

• Garrett SuperScanner, SERVICE INFORMATION Battery Replacement Slide back the battery cover (do not attempt to remove it), tilt the detector and battery will slip out. Replace with fresh battery. Because the battery cover will not slide back if the battery is inserted improperly, never force the cover. When the SuperScanner is to be stored more than 30 days, remove the battery. Threshold Adjustment - Turn on the SuperScanner. Roll back the grip cover just below the nameplate. Insert a small flat blade screwdriver in the exposed hole and turn slightly to adjust. Sound should be barely silent when the detector is tuned on but not detecting metal. Maximum sen

• Garrett SuperScanner, FACTORY SERVICE Pack the detector carefully and include full details concerning its problem as well as your name, address and telephone number. Ship to: Garrett Metal Detectors - Service Department 1881 W. State St. Garland, TX 75042 USA Allow approximately one week for techni- cians to examine and repair your instru- ment. 12 - Garrett Metal Detectors

• DETECTION PRINCIPLES AND CAPA- BILITIES The SuperScanner is an active hand- held metal detector with very high sensi- tivity to all metals including ferrous, non- ferrous and stainless steel. Detection and alarming takes place when the instrument is passed in close proximity to metal objects. Detection range is dependent upon the size and conductivity of the metal object.

• Garrett SuperScanner, (floor rebar, metal walls or cell bars) cause interference to the scanning process, an Interference Elimination Button is available to momentarily reduce sensitivity so as to ignore the interfering nearby metal and permit pre- cise scanning of the individual or object being scanned. When metal objects are encountered, a sharp audible signal and a red LED are activated. If desired, the audible signal can be silenced by inserting the optional earphone. Further convenient LEDs include green for "Power ON&q

• Garrett SuperScanner, RECOMMENDED BODY SCANNING PROCEDURE SuperScanner - 15 The Interference Elimination Button may be required if floor rebar is present. NOTE: Detection is only possible when the SuperScanner is moving over a metallic object. Front Scanning Double check pocket areas. Back Scanning

• Garrett SuperScanner, SAFETY NOTICE Garrett Metal Detectors makes every effort to ensure that its products are safe for its users. Extensive research has produced no information that would indi- cate that use of this product has adverse effects on pregnancies or on the opera- tion of electronic medical implants such as pacemakers. However, Garrett rec- ognizes there may exist personal med- ical electronic devices that may be affected by this product and advises that any recommendations by electronic medical device manufacturers or physi- cians be followed. 16 - Garrett Metal Detectors

• Garrett SuperScanner, ACCESSORIES Rechargeable Battery Kit: Environmentally friendly battery. 7.2 Nickel metal Hydride (NiMH) battery kit for recharging from conventional electric current. 110V - Model #1610200 220V - Model #1610800 Earphone The earphone permits audio alarms of SuperScanner to only come through the earplug. Model #1600100 Belt Loop Police-quality leather sling provides means for carrying the SuperScanner on any belt up to 3" (7.5cm) width. Quick release access strap. Model #1600800 SuperScanner - 17

• Garrett SuperScanner, Belt Holder Police-quality ballistic weave Model #1611600 SuperScanner Video In addition to the User Manual, a Garrett instructional video and DVD are avail- able detailing SuperScanner features, controls and operating tips on effective scanning. VHS - Model #1678100 PAL: - Model #1678170 DVD - Model #1678180 18 - Garrett Metal Detectors

• Garrett SuperScanner, Garrett Metal Detectors 1881 W. State Street Garland, TX 75042 Tel: 972.494.6151 Fax: 972.494.1881 E-mail: [email protected] Web: garrett.com 1531600.B.0805 Garrett Metal Detectors, garrett.com, SuperScanner and the SuperScanner hand-held design are trademarks of Garrett Electronics, Inc. ©Garrett Metal Detectors.

More Instructions:

Garrett SuperScanner Operation & user’s manual 02-03-2024 9

DOWNLOAD

Related Products and Documents (Scanner):

Comparable Devices:

Similar Resources:

• RIOTEC DC9270J (3 pages) 1 Quick Guide -DC9270J 1 Connect to micro USB port of OTG device 2 3 * Before you use scanner, please switch to "C" for battery charge for 3~4 hours. * Under “C mode”, you can raise/lower soft-keyboard easily. (For USB HID only)4 DC9270J is with Li-Ion battery inside. When in charging, please use t …

• Chauvet DMX-600 (14 pages) Chauvet, 3000 N 29th Ct, Hollywood, FL 33020 U.S.A (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.com 2005-09-21/12:31 DMX-600Intimidator™ 1.0USER MANUAL …

• Magtek Excella (2 pages) 4. Run Excella Demo• Navigate to and run C:\Program Files (x86)\MagTek\Excella-STX-ImageSafe\ Excella-STX_Demo.exe• Click on the Excella Demo icon to run the demo; the main screen will be displayed (see Figure 2).• In the Select Device pull-down menu, choose Excella.EXC001.• Click on the Connect button.• Based on the documents you want to read …

• Noritsu LS-600 (94 pages) LS-6002Starting GuideThis manual covers precautions and other information you need to know beforeoperating this product.1. For your safety2. Getting Started3. Turing power on/off4. Emergency operation5. Mastering basic operations6. Daily maintenance7. How to access the HELP display8. Accessories and consumable partsEnglish Ver. 1 …

• Microtek XT6060 (8 pages) 1Step 2: Install SoftwareStep 1: Unpack ContentsStart Here Installing your Microtek XT6060Unpack your scanner package and checkfor major components.1. XT6060 scanner2. Power adapter3. Power cord4. Software CDs/DVDs5. Hi-Speed USB cableImportant: Do not remove the yellow stickers from your scanneruntil you are told to do so. You must install software be …

• PMS MD-3003B1 (2 pages) MD-3003B1 NOTE • If the green light goes out completely or fails to come on or if the unit is making unfamiliar audio tunes, the unit is unstable and should not be used until the battery is recharged or replaced. • If the unit is not to be used for a certain length of time it is advisable to remove the battery to avoid battery leakage which could …

Comments, Questions and Opinions: