ACLAS PP7X Operation & User’s Manual

Text of ACLAS PP7X User Guide:

• ACLAS PP7X, 14 5.1.3 RS232 (PHONE6C) Pin No. Signal Name Direction Function 1 CTS Input Clear to Send 3 GND ——— Frame Ground 4 RXD Output Receive Data 5 TXD Output Transmit Data 6 RTS Output Ready to Send Printer Side Host Side /RTS The Definition of D9-P6

• ACLAS PP7X, 8 2.3 Paper Installation Note: Bad quality thermal paper with rough surface and low sensetivity may reduce the life time of the printer head, please use high quality thermal paper, such as OJI, PD-160R or Aclas paper. (1) Make sure that the printer is not receiving data; otherwise, data may be lost. (2) Open the printer upper cover by pressing the cover button as picture 6. (3) Insert the paper roll to the printer as picture 7. Picture

• ACLAS PP7X, 5 2 INSTALLATION 2.1 Display Installation (The printer with customer display) Install customer display before using the PP7X printer. (1) Press printer upper cover button upwards to open the printer cover as picture1. (2) Install the customer display via the interface as picture 2. Picture 2 Picture1

• ACLAS PP7X, 18 5.4 Drawer Port Definition Pin No. Signal name Direction 1 Frame ground - 2 Drawer kick-out drive signal 1 Output 3 Drawer open/close signal Input 4 +24V - 5 Drawer kick-out drive signal 2 Output 6 Signal ground - Pin No. Signal name Direction 1 +24V - 2 Drawer open/close signal Input 3 Drawer kick-out drive signal 1 Output 4 Drawer kick-out drive signal 2 Output

• ACLAS PP7X, 2 1.4 Specifications Optional type PP721MX PP721HX PP71MX PP71HX Speed 150mm/s 250mm/s 150mm/s 250mm/s Power Supply DC24V /2A Print Method thermal print Resolution 203dpi Paper Paper type Thermal paper Paper width 57.5±0.5mm 79.5±0.5mm Paper roll diameter 80mm Paper installation type Unique mechanism that make paper installation easily Character print Character set ANK character set, Chinese GB2312, Traditional Chinese BIG5, 12×24 dots, 24×24 dots Number of column

• ACLAS PP7X, 7 2.2 Communication Board Replacement Note: Make sure that PP7X is powered off when you are changing the communication board. Power off PP7X for more than 10s, then the communication board can be replaced. (1) Use cross screwdriver to unscrew the two screws of the communication board as picture 4. (2) Take off the communication board and replace it as picture 5. (3) Install the new communication board along the slot, lock the two screws. We

• ACLAS PP7X, 19 6 DIP SWITCH  The communication port module is with dip switch, please refer to the picture below:  There are 8 Dip Switch altogether, each switch has its own function, please refer to the diagram below: DIP-8 Function ON OFF SW-1 Select cutter Yes No SW-2 Select buzzer Yes No SW-3 Reserve SW-4 Select hardware flow control Yes No SW-5 Select print density Light Dark SW-6 Select print density Light Dark SW-7 Select baudrate SW-8 Select

• ACLAS PP7X, 15 5.1.4 RS232 (PHONE4C) Pin No. Signal Name Direction Function 2 GND ——— Frame Ground 3 RXD Input Receive Data 4 TXD Output Transmit Data Printer Side Host Side The Definition of D9-P4

• ACLAS PP7X, 20 a) SW-5 and SW-6 are used to set print density, the on/off status of SW-5 and SW-6 is able to compose different density. Please refer to the table below: SW-5 SW-6 Heat Time Density ON ON 600us Dark ON OFF 500us Middle Dark OFF ON 420us Middle Light OFF OFF 360us Light NOTE: We suggest that you should not select ‘dark’ density level, or it may reduce the life time of the printer head for 15％. b) SW-7 and SW-8 are used to control baudrate, the on/off status of SW-7 and SW-8 is able to compose different baudrate. Please ref

• 10 3 SETTING THE PRINTER 3.1 Using the Printer 3.2 Connecting the Computer (1) Power off the printer. (2) Plug the communication cable securely into the printer, then attach the other end of the cable to the computer. (3) If the cable connector is shown as picture 11, tighten the two screws on both sides of the cable conn

• ACLAS PP7X, 12 4 SELF TEST Press key „Feed‟ and hold it, and then power on the machine at the same time, it will print a piece of Test Page. The information of this Test Page includes the printer‟s model, version, IP address (Ethernet port), ID and the default setting of the dip switch when leave factory. 5 CONNECTING THE CABLES NOTE: Before connecting any of the cables, make sure that both the printer and the host are turned off. 5.1 Serial Interface There are four kinds of serial interface. Details are as follows: 5.1.1 RS232 (D9)

• ACLAS PP7X, 9 (4) Be sure to note the correct direction thats the paper comes off the roll shown as picture 8. (5) Pull out a small amount of paper to make it parallel with the alignment line as picture 9，and then close the upper cover by pressing its front middle part until you hear a „click‟ sound. (6) After closing the upper cover，tear off the paper as picture 10. Right Wrong Picture 8 Picture 10 the alignment line Picture 9 close the cover by pressing here

• ACLAS PP7X, 23 Note: Close the upper cover securely could avoid paper-cutter lock. If the problem still exists, contact our after-sales service center. 9) The temperature of the printer head is too high. Power off the printer, and then restart it until the temperature is cooling down.

• 22 8 TROUBLESHOOTING 1) Paper is near end or used up. If the paper is near end or used up, the “Paper out” and “Power” indicator light will be illuminated at the same time. In this case, the printer will stop printing. And then install a new paper roll, the printer will continue printing. 2) The printer could self-test but could not print. a. Make sur

• ACLAS PP7X, 1 1 INTRODUCTION 1.1 Application Range The quality of easy operation, high speed and stable performance has made the printer one of the most economical and practical printing devices. It has been applied in various fields such as supermarkets, department stores, hotels, franchises, finance, telecommunications and ticket business as a receipt printer. And it could be combined with cash registers, touch-pos terminals, computers and other equipments. There are two kinds of printers about PP7X Printer: the printer with customer display, and the printer without customer display. 1.2 Unique Functions ※ Oblique paper-sensor. Detect the pape

• ACLAS PP7X, 16 5.2 Parallel Interface Pin No. Source Compatibility Mode Nibble Mode Byte Mode 1 Host nStrobe HostClk HostClk 2 Host/Printer Data 0 - Data 0 3 Host/Printer Data 1 - Data 1 4 Host/Printer Data 2 - Data 2 5 Host/Printer Data 3 - Data 3 6 Host/Printer Data 4 - Data 4 7 Host/Printer Data 5 - Data 5 8 Host/Printer Data 6 - Data 6

• ACLAS PP7X, Head Office: 4F, NO.270, Sec 3, Nan-kang Road, Taipei, Taiwan Factory 1: North 4th Floor, Guangxia Building, Torch High-Tech Zone, Xiamen, China Factory 2: No.1, Fangshannan Road, Xiang’an Industrial Zone, Xiamen, China DPP701ENV2-22

• ACLAS PP7X,  Safety Precautions Before using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. 1. WARNING （1） Connect the printer with a reliable grounded power receptacle. Do not plug with large electronic machines in one multi-outlet, which can provoke power fluctuation or over-heating, even a fire. （2） Do use the only supplied adapter. （3） Do not keep the machine in a hot, wet or polluted place.

• 11 3.3 Connecting the Power Supply ※ CAUTIONS When connecting or disconnecting the power supply from the printer, make sure that the power supply is not plugged into an electrical outlet. Otherwise you may damage the power supply or the printer. If the power supply’s rated voltage and your outlet’s voltage do not match, contact your dealer for

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• Skip-Line CP130 (11 pages) USER GUIDE to the CP130 Thermal Printer Revision: “1.0” Filename: “CP130 Users Guide v1 0.doc” Date: “29 March 2011” …

• Epson LX-300+ (12 pages) 3ULQWHUý6SHFLILFDWLRQVýPrintingPrinting method: 9-pin dot matrixPrint speed:3ULQWLQJýPR GH &KDUDFWHUýVL]HV 0D[LPXPýSULQWLQJýVSHHG'UDIW ìíýFSL ëëíýFSV'UDIW ìëýFSL ëçéýFSV'UDIWýFRQGHQVHG ìæïìýFSL ìååýFSV'UDIWýFRQGHQVHG ëíýFSL ëëíýFSV'UDIWýHPSKDVL]HG ìíýFSL ììíýFSV'UDIWýGRXEOHýZLG …

• Epson Stylus COLOR 900G (206 pages) When setting up and using your new EPSON Stylus COLOR 900G, follow theinstructions in the Start Here card and Printer Basics book for the EPSON Stylus COLOR 900.The information contained in these books applies to both printer models.To use your printer and its software, you should have a Power Macintosh®G3(System 8.5.1 or later) or iMac (System 8.1 or later …

• Xante AW 1200 (169 pages) 110/220 volt editionXANTÉ CORPORATION2800 Dauphin St., Suite 100Mobile, AL 36606-2400P.O. Box 16526, Mobile, AL 36616-0526Phone: 800-926-8393, 251-473-6502Fax: 251-473-6503website: www.xante.comAW1200-v27/8/02 …

• HP CP4020 (4 pages) HP COLOR LASERJET ENTERPRISE CP4020 PRINTER SERIES CP4025n • CP4025dn This easy-to-use color laser printer offers powerful, professional-quality color and black-only printing—ideal for sharing with small to medium workgroups. • Get a great value for the price—this printer is packed with performance features. • Produce superb color quality a …

• Canon imageRUNNER 1643iF II (8 pages) Important Safety InstructionsThis chapter provides important safety instructions for the prevention of injury to users of this machine and others, and damage to property. Read this chapter before using the machine and follow the instructions to ensure that you use the machine properly. The Canon online manual site (https://oip.manual.canon/) also provides in …

Comments, Questions and Opinions: