Samsung P50HP-2 Quick Start Manual
|
Samsung P50HP-2, Using the HDMI (digital) output on the graphics card. • Connect the [HDMI IN] port on the PDP Display to the HDMI port on the PC using the HDMI cable. Note When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted. Note that sound is only available when connected according to the option that follows. Using the BNC (Analog) connector on the video card. • Connect the [BNC/COMPONENT IN] port on the monitor to the BNC port on the
Samsung P50HP-2, Connecting a DTV Set Top (Cable/Satellite) Box 1. Connect a Component cable between the [BNC/COMPONENT IN [R/P R , G/Y, B/P B ]] port on the PDP Display and the P R , Y, P B jacks on the Set Top Box. 2. Connect a set of audio cables between the [AV COMPONENT AUDIO IN [R-AUDIO-L]] on the PDP Display and the AUDIO OUT jacks on the Set Top Box. Note • Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the PDP Display or on the remote control. • For an explanation of Component video, see your Set Top Box owner's manual. Connecting to an Audio System 1. Conn
Samsung P50HP-2, 1. Connect an audio cable to the audio output port on the external device and [AV/COM- PONENT AUDIO IN[R-AUDIO-L]] port on the monitor, and connect the video output port on the external device to the [AV IN [VIDEO]] port on the monitor. 2. Play the DVD, VCR or Camcorder with a DVD disc or tape inserted. 3. Select AV using the SOURCE button on the front of the PDP display or on the remote. Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV/COMPONE
Samsung P50HP-2, A: Check if the signal cable between the computer and the PDP Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the PDP Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensure that the power cord is firmly connected and the PDP Display is on. (Refer to the Connecting a Computer) Q: "Check Signal Cable" message. A: Ensure that the signal cable is firmly connected to the PC or video sources. (Refer to the Connecting a Computer) A: Ensure that the PC or video sources are turned on. Q: "Not Optimum Mode" message. A: Check the maximum resolution
Samsung P50HP-2, A: Check if the batteries are empty. A: Check if the power is on. A: Check if the power cord is securely connected. A: Check if a special fluorescent or neon lamp is on in the vicinity. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I Adjusts the resolution? A: Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Set- tings. A: Windows ME/2000: Set the resolution in the Control Panel → Display → Settings. * Contact the v
Samsung P50HP-2, Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustra- tion depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. Note The location of the Kensington Lock may be different depending on its model. Using the Anti-Theft Kensington Lock 1. Insert the locking device into the Ken- sington slot on the Monitor and turn it in the locking direction . 2. Con
Samsung P50HP-2, Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer. Troubleshooting
POWER OFF Number Buttons DEL / GUIDE button - VOL + SOURCE D.MENU TOOLS Up-Down Left-Right buttons INFO COLOR BUTTONS TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo 1. POWER Turns the product On. 2. OFF Turns the product Off. 3. Number Buttons Used to enter the password during the OSD adjustment or to use MagicInfo. 4. DEL / GUIDE but- ton The
Samsung P50HP-2, Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the PDP Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the PDP Display. The figure shown below ("Check Signal Cable") appears on a black background when the PDP Display is working normally even though no video signal is detected: While in the Self-Test mode, the LED power indicator remains green and the figure moves a
Samsung P50HP-2, 9. Up-Down Left-Right but- tons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 10. INFO Current picture information is displayed on the upper left corner of the screen. 11. COLOR BUTTONS Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu. - This button is disabled for this PDP display. 12. TTX/MIX TV channels provide written information services via tele- text. - Teletext Buttons - This button is disabled for this PDP display. 13. MTS/DUAL -
Samsung P50HP-2, RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB IN (PC Connection Terminal (In- put)) • Use a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) • Connect the RGB IN port on the monitor to the BNC port on the PC using the RGB to BNC cable. DVI IN (PC Video Connection Terminal) Connect the [DVI IN] port on the monitor to the DVI port on the PC using the DVI cable. DVI/RGB AUDIO IN (PC/DVI Audio Con- nection Terminal (Input)) AV/COMPONENT AUDIO IN [R-AUDIO- L] Connect the port of the DVD, VCR
Samsung P50HP-2, Connecting Using a HDMI Cable 1. Connect input devices such as a Blu-Ray/DVD player to the [HDMI IN] terminal of the PDP Display using an HDMI cable. 2. Select HDMI using the SOURCE button on the front of the PDP Display or on the remote control. Note In HDMI mode, only PCM format audio is supported. Connecting Using a DVI to HDMI Cable 1. Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of the PDP Display using a DVI to HDMI cable. Connections
Samsung P50HP-2, PDP Display Manuals Quick Setup Guide Warranty Card (Not available in all loca- tions) User's Guide Cables Power Cord D-Sub Cable Others Remote Control Batteries (AAA X 2) (Not available in all loca- tions) Ferrite Core for Power Cord Sold separately DVI Cable Wall Mount KIT BNC to BNC Cable Network Box RGB to BNC Cable Ferrite Core • The ferrite cores are used to shield the cables from interfer- ence. • When connecting a cable, open the ferrite core and clip it around the cable near the plug. Introduction
Samsung P50HP-2, Connect the audio cable for your PDP Display to the audio port on the back of the PDP Display. Connect the power cord for your PDP Display to the power port on the back of the PDP Display. . Note • Turn on both your computer and the PDP Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices • AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the PDP Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your PDP Display. • The PDP Display's conf
Samsung P50HP-2, Connecting the BNC to BNC cable 1. Connect the [BNC/COMPONENT IN [R/P R , G/Y, B/P B ]] ports on the monitor to the BNC port on the external device using the BNC to BNC cable. 2. Select BNC using the SOURCE button on the front of the PDP Display or on the remote control. Connecting Using a DVI Cable 1. Connect between the [DVI OUT] port on the PDP Display and the input port on another monitor using a DVI cable. 2. Connect between the [AUDIO OUT] port on the PDP Display and the audio input port on anoth
Samsung P50HP-2, Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your PDP Display OFF when it is not needed or when leaving it unattended for long periods. Remote Control Sensor Aim the remote control towards this spot on the PDP Display. Rear Note For detailed information concerning cable connections, refer to Connecting Cables under Setup. The PDP Display's configuration at the back may vary slightly depending on the PDP Display model. POWER IN The power cord plugs into the PDP Display and the wall plug. Introduction
Samsung P50HP-2, • Do not use benzene, thinner or other flammable sub- stances, or a wet cloth. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.) • The user will be required to pay costs and related expenses for repairing damages caused. Symptoms and Recommended Actions Note A PDP Display recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the PDP Display to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the
Samsung P50HP-2, Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The Power Indicator blinks. A: The PDP Display is currently saving the changes made to the settings to the OSD memory. Q: The screen is blank and the power indicator light blinks every 0.5 or 1 seconds. The PDP Display is using its power management system. Press any key on the keyboard. A: The PDP Display is using its power management system. Press a key on the keyboard. Q:
Samsung P50HP-2, 2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the [DVI / RGB AUDIO IN] terminal of the PDP Display. 3. Select HDMI using the SOURCE button on the front of the PDP Display or on the remote control. Connecting a DVD Player 1. Connect a set of audio cables between the [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the PDP Display and the AUDIO OUT jacks on the DVD player. 2. Connect a Component cable between
Samsung UN55F6300AF Projector Accessories Quick start manual
UN55F6300AF |
Samsung BN59-00786C-00 Projector Accessories Quick start manual
BN59-00786C-00 |
Samsung Series 4000 Projector Accessories Operation & user’s manual
Series 4000 |
Samsung ATIV Smart PC Pro 5 Projector Accessories Operation & user’s manual
ATIV Smart PC Pro 5 |
Samsung UN40C7000 Projector Accessories Available apps
UN40C7000 |
Samsung SyncMaster 950p Plus Projector Accessories Owner's instructions manual
SyncMaster 950p Plus |
Samsung PS42B451B2W Projector Accessories Operation & user’s manual
PS42B451B2W |
Samsung UN40C7000 Projector Accessories Operation & user’s manual
UN40C7000 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Alarm Lock | Trilogy DL4100 Series Addendum | Addendum | alarm-lock/trilogy-dl4100-series-addendum-453.pdf | 28 Dec 2023 | 1 | 0.08 Mb |
2 | Fender | Frontman 15G | Instruction manual | fender/frontman-15g-7L3.pdf | 28 Jul 2023 | 20 | 1.56 Mb |
3 | Sony | MDR-EX37B/YLW | Specifications | sony/mdr-ex37b-ylw-M2H.pdf | 10 Sep 2023 | 1 | 0.16 Mb |
4 | AEG | SANTO C 8 18 43-4I | Operation & user’s manual | aeg/santo-c-8-18-43-4i-79X.pdf | 20 Dec 2022 | 12 | 0.24 Mb |
5 | Optoma | TX776 | Quick start card | optoma/tx776-MES.pdf | 03 Oct 2022 | 2 | |
6 | Microsoft | Mouse | Manual | microsoft/mouse-757.pdf | 20 Sep 2023 | 28 |
Techly
UNIVERSAL FLEXIBLE PROJECTOR / LAPTOP TROLLEYwww.techly.comwww.techly.com - [email protected] User's ManualIT Manuale d’istruzioneDE BedienungsanleitungFR Mode d’emploiES Manual de instruccionesPL Instrukcja użytkownikaICA-TB TPM-6Support projectors up to 10 KG
…
ICA-TB TPM-6(8 pages) |
Draper
Low Voltage Control Wiring Diagrams for All Draper ProductsCopyright ©2011 Draper Inc. Form LVC-Wiring_Inst11 Printed in the U.S.A.Revelation ....................................... Page 1Micro Projector Lift .......................... Page 1AeroLift 25 ...................................... Page 2AeroLift 50/150 ............................... Page 2LCD …
LVC-III(4 pages) |
Barco
DP2K12CCompact DLP Barco Alchemy Cinema projector for screens up to 12m (39ft)The Barco Alchemy DP2K12C is a compactandfullyintegrateddigitalcinemaprojector,based on Texas Instruments' proven 0.98”DLP Cinema® chip. It ensures a firstclassmovie experience with consiste …
DP2K-12C(2 pages) |
Navitar
Installation of Navitar NuView Series 370 lenses on Christie LX65 & LX100, LX120, L6 Roadrunner & L8 Roadrunner projectors. TOOLS REQUIRED: PHILLIPS HEAD SCREWDRIVER 1. Ensure projector power cord is disconnected. 2. Remove front cover by taking 2 Phillips screws from top cover then lifting up while applying pressure to front of cover. 3. Inse …
370MCZ125(1 pages) |
Navitar
Navitar/NuView Series 681 lens on Eiki model LC- 80 Projectors. TOOLS REQUIRED: PHILLIPS HEAD SCREWDRIVER Disassembly: 1. Disconnect unit from power source and place projector with lens facing you. Remove two (2) screws from top cover of lens. Remove cover and set aside for reinstallation. 2. Remove prime lens by lifting the lever on the left side of …
681MCL012(1 pages) |
TOOQ
7626k g(57lbs )R A T E D820-1200mm3 6 0 °20° -20° 20° -20° ©2017 by TOOQ technology, S.L. Released in 2019/06.AII Rights Reserved.tooq.com• Un équipement de sécurité et des outils appropriés doivent être utilisés. Ce produit ne doit être installé que par des professionnels.• Ce produit contient de petits objets pouvant présenter un risque …
PJ4017WTN-B(2 pages) |
Blackberry Cell Phone TOUR 9630 - 256 MB - Verizon WirelessBlackberry Product Manual: TOUR 9630 - 256 MB - Verizon Wireless PDF Get started manual - 8DE6NI TOUR 9630 - 256 MB - Verizon Wireless, 14 |
PURE Radio Evoke-2XT#553Y3T Evoke-2XT: PURE Radio Owner Documentation Evoke-2XT, 21 |
TroposAir Fan Triton IIUser Guide: TroposAir Triton II (EH5698, Upd.24th Jan 2024) Triton II, 6 |
Bowens Camera Flash ESPRIT 1500ESPRIT 1500 (Camera Flash ePDF Guide, #Y14J25) ESPRIT 1500, 8 |
Hitachi CRT TV 35UX60B, 35TX10BHitachi Product Manual: 35UX60B, 35TX10B PDF Operating manual - G52S12 35UX60B, 35TX10B, 94 |
Yamaha Musical Instrument B2000#653K7D B2000: Yamaha Musical Instrument Owner Documentation B2000, 64 |
Samsung Cell Phone SGH-I747Samsung SGH-I747 Manual (Operation & user’s manual), @68P43D SGH-I747, 232 |
Aiwa Cassette Player TP-VS500Aiwa TP-VS500 User Guide (Doc Type: Cassette Player Operating instructions) TP-VS500, 2 |
HEIN-WERNER AUTOMOTIVE Power Tool HW93300HEIN-WERNER AUTOMOTIVE HW93300 User Manual (Operating instructions & parts manual), @KLOMQ5 HW93300, 8 |
Briggs & Stratton Engine 80200 Series#46F1XA: 80200 Series Engine Operating and maintenance instructions manual 80200 Series, 12 |
Henny Penny Fryer OFE-341OFE-341 (Fryer ePDF User Manual, #11ETHC) OFE-341, 8 |
NAPCO Security System XP-400NAPCO Security System XP-400 Using instruction XP-400, 16 |