Datecs PP-60 Operation & User’s Manual

Text of Datecs PP-60 User Guide:

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 21 PP-60 User Manual v1.0 Magnetic Card Reader The PP-60 has a built-in magnetic card reader. The card reader incorporates a (3)-track magnetic read head requiring a single swipe to read field data from all three tracks. Figure 16 The reader’s magnetic head faces towards the bottom of the printer. When placing the card into the reader, the magnetic strip must be facing as show in the figure above. Keep the inner edg

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 19 PP-60 User Manual v1.0 Memory Switch Details Figure 15  SW1: Enable/Disable buzzer.  SW2: Execute Carriage Return as Line Feed command.  SW3: Disable/Ignores Line Feed commands.  SW4: Disables Line Feed command after Carriage Return command.  SW5: Set small font as default character size.  SW6: Reserved.  SW7: Reserv

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 18 PP-60 User Manual v1.0 Setting Memory Switch  MEMORY SWITCH SETTINGS: Step #1: Make sure the printer is OFF (STATUS LED is OFF) before performing step #2. Step #2: Press and hold the line feed button (LF). While pressing the (LF) button, press and hold the (ON) button until the status status LED display solid RED. Step #3: Release the (ON) button and count (2) Beeps or until the next solid RED LED is displayed. Release LF button and follow and the instructio

• . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 4 PP-60 User Manual v1.0 Box Contents Your PP-60 comes with the following items listed below: Item Part Number Descriptions Image 1 PP-60xx PP-60 Thermal printer 2 - AC charger 3 - 1 Roll of thermal paper 4 - User's manual 5 - RS-232 inter

• . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 7 PP-60 User Manual v1.0 About Your PP-60  PP-60 left view Figure 1  PP-60 right view Figure 2 Paper Feed 1D / 2D Scanner PDA Cover Paper Cover Lock Scan Button Power /Scan

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 8 PP-60 User Manual v1.0 About Your PP-60  PP-60 left view Figure 3 USB Port Paper Cover Lever Charger Input Battery Cover

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 17 PP-60 User Manual v1.0 Memory Switch Settings The PP-60 uses nonvolatile memory for storing some of the printer default configuration. The following table shows the available options. Memory Switch Options Memory Switch (see command reference GS command) 1000000011 BAUD RATE 115200 bps POWER OFF TIME 10 minutes PRINT DENSITY 100% CHARACTER TABLE WESTERN (1252) Table 7

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 27 PP-60 User Manual v1.0 Contact Information National Sales Headquarter: Datecs Ltd. 115A Tzarigradsko Shosshe bul. Sofia, Bulgaria Phone: +359 2 974 00 55 Fax: +359 2 974 11 00 www.datecs.bg [email protected]

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 13 PP-60 User Manual v1.0 Diagnostic Information The PP-60’s FEED switch/button is used for entering various printer modes. These modes can be used to assist developers in debugging problems related to programming and communication. The following explain how to access the various operating modes. Step #1: Make sure the printer is OFF (BT LED is OFF) before performing step #2 or step #3. Step #2: Press and hold the Feed B

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 11 PP-60 User Manual v1.0 Loading Paper The PP-60 uses a drop-and-load design making paper loading easy and trouble free. To load paper, simply lift up the paper cover latch and drop in the new roll as shown in the steps below. 1. Slide the paper cover latch to unlock the paper cover as shown in the figure on the right.

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 24 PP-60 User Manual v1.0 Replacing Battery To replace the battery in the PP-60 thermal printer follow the steps below. Steps: 1. Remove the PDA cover as shown in the figure below. Figure 19 2. Lift the battery cover and battery as showed in the figure below. Figure 20 3. Replace the new battery and cover.

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 12 PP-60 User Manual v1.0 PDA Installation The PP-60 uses a top cover PDA snap/locking mechanism to hold the PDA securely in place. Care must be taken when installing the PDA to PP-60. 1. Remove the PDA cover as shown in the figure on the right. There are 4-snap locking mechanisms on each corner of the cover. Figure 9 2. Flip the PDA cover and take care not to damage the 4- pins. Insert the USB connector into the PDA as shown in the figure on the right.

• . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 22 PP-60 User Manual v1.0 1D Barcode Scanning Using the 1D barcode scanner: The PP-60 uses a scan engine that supports one-dimensional (1D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size. Sca

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 25 PP-60 User Manual v1.0 Developing Solution Integrating the PP-60 into your mobile solution requires the use of the PP-60 PDA & Smartphone SDK. The SDK incorporates API specific to developing printing applications and using the integrated Magnetic Card Reader / Smart Card Reader capability of the PP-60. The table below shows the SDKs currently available for PDA & Smartphone devices. OS Language SDK - IDE Android Java Eclipse BlackBerry Java RIM Black

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 5 PP-60 User Manual v1.0 Compatible Devices The PP-60 portable thermal printer is designed specifically for use with many PDA & Smartphone devices. The PP-60 can be used in a variety of applications where Printing / Card Reading / Barcode Scanning are required. User Notes: Compatibility depends on the type of communication method your PDA or Smartphone supports and the availability of PP-60 driver for your device. 

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 10 PP-60 User Manual v1.0 Status & Operating Modes The PP-60 uses LEDs to indicate various conditions of operation. This may be charging, active or online, battery low conditions. The following explains these conditions and LED indication. LED Function STAT Green – the printer power is on. Red – no paper or cover open. Charging Green – charge ready Red – charging BT Green blinking - MSR Green lighting – Barcode Blue blinking - Bluetooth Table

• . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 16 PP-60 User Manual v1.0 DIP Switch Location The DIP Switch is located under the PP-60 battery. Follow the steps below to locate the switch. Figure 13 DIP Switch # 1 - Remove battery cover # 2 - Remove battery

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 3 PP-60 User Manual v1.0 Technical Data Feature Specifications Printing method Line thermal dot printing Printing speed 60 mm/s (480 dots/sec) at Full charged battery Print Width 48 mm / 384 dots per line Resolution 203 dpi (8 x 8 dots/mm) Dot pitch Horizontal – 0.125 mm (8 dots/mm) Vertical – 0.125 mm (8 dots/mm) Resident fonts A: 12 x 24 dots B: 9 x 16 dots Loadable fonts C: 12 x 24 dots D: 9 x 16 dots Resident Fo

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 14 PP-60 User Manual v1.0 Self-test The PP-60 has a built-in test pattern that shows the printer’s current configuration as well as the various resident printer fonts. The self-test can also be used as a troubleshooting tool to determine printing problems or battery level. The steps below show how the self-test is printed activated. • Resident font sizes • Characters per line • Text formatting • Resident character set • Resident barcode symbols • Printer’s Configuration

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 15 PP-60 User Manual v1.0 Dip Switch Settings The PP-60 is designed to use different methods of communications. Care must be taken to ensure that the DIP Switches are not changed from its default factory configuration unless required.  DIP SWITCH SETTINGS: The printer has two absolutely different operation modes. They are determined by the state of switch Sw2:  Continuous Paper mode  Black Mark mode Th

• Datecs PP-60, . . . . . . . . . . . . . . . . . . . . . . Datecs Ltd. www.datecs.bg Page 2 PP-60 User Manual v1.0 Contents Contents ...............................................................................................2 Technical Data .....................................................................................3 Box Contents .......................................................................................4 Compatible Devices.............................................................................5 Getting Started .....................................................................................6 About You

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• HP ProLiant xw2x220c - Blade Workstation (13 pages) Session Allocation Manager 2.1—Optimizing your HP Blade Workstation Solution Deployment Objective............................................................................................................................................ 2 Overview............................................................................................................. …

• Dymo LabelWriter 450 (3 pages) Source: DYMO Quick Start Guide © 2010 Sanford, L.P. How to Order and Insert a Roll of Labels in the DYMO LabelWriter (models 450 & 450 Turbo) The DYMO LabelWriter can accommodate multiple sizes of labels; the symplr® System prints the Vendor / Guest day pass on the Shipping Label size and the roll contains 220 labels. The labels can be ordered und …

• Roland SOLJET PROIII XC-540 (56 pages) Setup GuideRead this rst. This describes the setup tasks and important conditions about the installation location that must be met in order to enable use of this machine. …

• Digital Equipment turboPrintServer 20 (6 pages) turbo PrintServer 20 andPrintServer 32 PrinterController FirmwareVersion 3.6 UpgradeOrder Number: EK–LPS2X–IN. A01Digital Equipment CorporationMaynard, Massachusetts …

• Metapace T-40 (2 pages) 2 3 2 Introduction of printer 2.1 Main parts 1—Top cover 2—Cutter 3—Platen roller 4—Paper end sensor 5—Paper guide 6—Micro switch …

• Microplex logiJET T4-2 (211 pages) ________________________________________________________________________________ ________________________________________________________________________________ logiJET T4-2 logiJET T6-2 with RFID (optional) Operator’s Manual Edition 2.2 Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jara …

Comments, Questions and Opinions: