Manualios.com

Adam S2A Operation Manual

Adam S2A Manual Online:

3.45, 1546 votes
Adam S2A User Manual
Adam S2A User Guide
Adam S2A Online Manual

Text of Adam S2A User Guide:

  • Adam S2A, 2 Table of contents Safety Instructions 3 Quick Start 4 Setting up your speakers 5-6 Controls 7-8 A.R.T. Accelerated Ribbon Technology 9 Limited warranty 10 Technical Data 11 Introduction First of all, we would like to thank you for choosing ADAM Audio. ADAM Studio Monitors are built to a maximum in reproduction quality and perfection. You have selected a precise high resolution active speaker system that allows you to professionally judge audio recordings. We are condent that these monitors can meet your expectations to a faithful sound reproduction. To enjoy the

  • English 3 Safety Instructions In case of a problem, please either contact your ADAM dealer or us. We are happy to try and help. Always refer servicing to qualied personnel and never attempt to repair this product by yourself. Please read through the following safety instructions completely before setting your system up. • Do not open the monitor. There are no user-serviceabl

  • Adam S2A, 4 Quick Start • After having unpacked your monitor, please allow the system to acclimate to the temperature of the room. Please do not connect the speaker for approximately an hour. • Make sure the power switch at the back of the unit is turned off as well as the switch on the front of the monitor. • Connect the XLR-Input (1) of the speaker to the output of your audio system. Decrease the volume of your audio system to protect your speaker and ears from damage when switching the system on. • Now, check the voltage

  • Adam S2A, English 5 Setting up your speakers The S2A is designed for vertical operation. The speakers should be positioned on rm ground or a stand. Vibrating parts of nearby objects can mask the sound. In case, you plan to modify the speaker cabinet (e.g. drilling holes), please contact us before doing so. We will guide you and handle your warranty obliging. Set up your speakers with the A.R.T. tweeters pointing upwards. Horizontal placement is possible. Please position both tweeter sections either to the outside or to the inside. You will get the best linear frequency response from different listening positions. Obstacles between the speaker and your ear must be avoided. You should

  • Adam S2A, 6 Setting up your speakers The Tweeter should be positioned approximately at the height of your ears. In case you need to position the speaker in a signi cant lower or higher position, the monitor needs to be angled. Placement of 2 speakers The ideal placement of two speakers and a listener in a two-channel stereo listening situation are the corner points of a equilateral triangle (60° angles). Since the S2A is a near  eld monitor, the best performance will be achieved with a stereo base/listening distance between 1 and 3 meters. Surround placement Speaker positioning for multi-channe

  • English 7 Controls The power switch and the XLR-input are located on the rear panel. The monitor offers adjustment of important parameters on its front panel (see g.) Standby switches the monitor on and off. Please note that this switch does not separate the monitor from the mains. The operating state is indicated by a LED that will be lit green with the

  • Adam S2A, 8 Controls INPUT GAIN To match the monitor’s input to the source signal level, the input sensitivity can be varied by -10 dB to +10 dB. ROOM EQ A detailed way to optimize the reproduction for the room are the two shelve lters at both ends of the frequency band. Above or below the given cut off frequency the amplitude is progressively changed. The given dB values occur at 30 Hz and 15 kHz. We show ve curves, the controls can be changed continuously however. HIGH GAIN The voltage gain of the tweeter amplier and thus the complete tweeter level can be varied in a ±4 dB range. This is a considerable change i

  • Adam S2A, English 9 A.R.T. Accelerated Ribbon Technology So far, all loudspeaker drive units, whether they are voice coil driven, electrostatics, piezos or magnetostatics, act like a piston, moving air in a 1:1 ratio. As the speci c weight of air is much lower than that of the driving mechanics, there is a bad match between source and load. This is one of the main reasons for the small 1-2% ef ciency of conventional speakers. All ADAM speaker systems take a completely new approach in kinematics to move air and overcome this probl

  • 10 Limited Warranty ADAM Audio GmbH grants a two years limited warranty for this product. If anything goes wrong with this product, ADAM Audio and its national distributors will provide repair free of charge (exclusions may apply) and replacement parts. Terms and Conditions This guarantee complements any national/regional law obligations of dealers or national distrib

  • Adam S2A, English 11 *1 = long term IEC 265-8-Wrms / 10 min *2 = nominal IEC 265-8 = Peak Power 5 µsec *3 = entsprechend den Angaben auf der Rückseite Woofer/Subwoofer 1 (HexaCone) Basket ø 186 mm (7”) A.R.T. Tweeter 1 Diaphragm area 71 cm 2 ( 11 in. 2 )v Equiv. diaphragm ø 95 mm (3.7”) Velocity transf. ratio 4:1 Built in amps 2 Subwoofer / Woofer *1/2 150 W/200 W Tweeter *1/2 150 W/200 W Controls Input Sensitivity ±10 dB Tweeter level ±4 dB Room EQ >6kHz ±6 dB Room EQ <150Hz

  • Adam S2A, Deutsch 13 Inhalt Sicherheitshinweise 14 Quick Start zur Inbetriebnahme 15 Empfehlungen zur Aufstellung 16-17 Bedienelemente 18-19 A.R.T. Accelerated Ribbon Technology 20 Garantie 21 Technische Daten 22 Einleitung Danke, dass Sie sich für einen Studiomonitor von ADAM Audio entschieden haben! Sie erwerben ein professionelles und hoch auösendes Aktivsystem zur zuverlässigen Beurteilung von Tonaufnahmen, gefertigt und gebaut mit dem Ziel größtmöglicher Perfektion und bestmöglicher Wiedergabequalität. Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme und beachten Sie die folgenden Sicherheitshinweise und Garantiebestimmun

  • Adam S2A, 14 Sicherheitshinweise Bei einem Problemfall wenden Sie sich bitte an Ihren ADAM Vertragshändler oder direkt an uns. Wir helfen gerne! Bitte versuchen Sie auf keinen Fall dieses Produkt selbst zu reparieren und beachten Sie die folgenden Sicherheitshinweise bevor Sie Ihre neuen Lautsprecher in Betrieb nehmen. • Öffnen Sie die Monitore nicht. Es benden sich keine wartungsbedürftigen Teile im Gehäuseinnern. • Vermeiden Sie, dass Flüssigkeiten jeglicher Art ins Gehäuseinnere gelangen. Sprühen Sie weder Flüssigkeiten direkt auf das Gerät, noch nutzen Sie nasse Reinigungstücher. • Bitte verwenden Sie keine brennbaren und ätzenden

  • Deutsch 15 Inbetriebnahme des aktiven Lautsprechers • Nach dem Auspacken sollte sich der Lautsprecher ca. 1 Stunde unangeschlossen an die Umgebungstemperatur anpassen. • Schalten Sie den Netzschalter auf der Rückseite und den Schalter auf der Vorderseite aus. • Verbinden Sie den XLR-Eingang (1) des Lautsprecher über einen “männlichen” XLR- Stecker mit dem

  • Adam S2A, 16 Empfehlungen zur Aufstellung Der S2A wurde für eine vertikale Aufstellung konstruiert. Stellen Sie den Lautsprecher auf festen Untergrund oder befestigen Sie ihn auf einem Ständer. Mitschwingende Teile können den Klang maskieren, selbst wenn es nicht offensichtlich “scheppert“. Sollte ein mechanischer Eingriff zur Aufstellung notwendig erscheinen (Dübel oder ähnliches), so setzen Sie sich bitte vorher mit uns in Verbindung. In der Regel gibt es hier keine Probleme, die Garantiebestimmungen werden kulant gehandhabt. Stellen Sie die S2A Monitore aufrecht mit den Hochtönern nach oben zeigend auf. Eine horizontale Aufstellung ist möglich. Für eine bestm�

  • Adam S2A, Deutsch 17 Empfehlungen zur Aufstellung Positionieren Sie die Hochtöner möglichst in Ohrenhöhe. Für den Fall, dass Sie die Monitore deutlich über- oder unterhalb Ohrhöhe platzieren müssen, sollten diese entsprechend angewinkelt werden. Zweikanal Stereo Die allgemein günstigste Lautsprecheraufstellung im Zweikanal-Stereobetrieb ist das so genannte Stereodreieck. Lautsprecher und Zuhörer sitzen an den Eckpunkten eines gleichseitigen Dreiecks (60° Winkel). Als Nahfeldmonitor erreichen Sie

  • 18 Bedienelemente Auf der Rückseite benden sich der Netzschalter und der XLR-Eingang. Der Lautsprecher verfügt über die Möglichkeit, wichtige Parameter auf dem Frontpanel einzustellen, welches auf der Vorderseite des Lautsprecher (s. Abb.) zugänglich ist. Der Standby-Schalter auf dem Frontpanel gibt Ihnen die Möglichkeit, den Lautsprecher ein- und auszuschalt

  • Adam S2A, Deutsch 19 Bedienelemente INPUT GAIN Um die Eingangsempndlichkeit des Lautsprechers an die Bedingungen der Signalquelle anzupassen lässt sich der Eingang in einem Bereich von -10 dB bis +10 dB einstellen. ROOM EQ Zur Optimierung der Wiedergabe bietet der ROOM EQ zwei Kuhschwanzlter an den Enden des Spektrums. Ober- beziehungsweise unterhalb der angegebenen Eckfrequenzen wird der Amplitudenverlauf progressiv angehoben und erreicht die angegebenen ±6 dB Werte bei 30 Hz und15 kHz. Die Graphiken zeigen beispielhaft fünf K

  • Adam S2A, 20 A.R.T. Accelerated Ribbon Technology Praktisch alle Antriebsprinzipien von Lautsprechern arbeiten nach dem Kolbenprinzip: Eine Membran setzt ihre Bewegungen 1:1 in Luftdruckschwankungen um. Die Luft setzt dabei der vergleichsweise relativ schweren Antriebsmechanik nur einen extrem geringen Widerstand entgegen. Diese schlechte Anpassung zwischen Quelle und Last ist ein wesentlicher Grund für den schlechten Wirkungsgrad von 1-2% gängiger Laut- sprecherkonstruktion. In allen ADAM Monitorsystemen kommt

  • Adam S2A, Deutsch 21 Garantie Die ADAM Audio GmbH gewährt auf Ihre aktiven Studiomonitore eine beschränkte Garantie von zwei Jahren. Sollte dieses Produkt Mängel aufweisen, so wird ADAM Audio und die nationalen Vertriebsgesellschaften das fehlerhafte Produkt ohne Berechnung der Arbeits- und Materialkosten, von einigen Ausnahmen abgesehen, reparieren. Garantiebedinungen Diese Garantie schränkt weder die gesetzlichen Rechte des Verbrauchers nach dem jeweils geltenden nationalen Recht noch die Rechte des Verbrauchers gegenüber dem Händler oder den nationalen Vertriebsgesellschaften ein. Die Garantie b

  • Adam S2A, 22 Woofer/Subwoofer 1 (HexaCone) Korb ø 186 mm (7”) A.R.T. Hochtöner 1 Membran äche 71 cm 2 (11 in. 2 ) Membrandurchmesser 95 mm (3.7”) Geschw.übersetzung 4:1 Eingebaute Verstärker 2 Tieftöner *1/2 150 W/200 W Hochtöner *1/2 150 W/200 W Regelmöglichkeiten Lautstärke ±10 dB Pegel Hochtöner ±4 dB Raumanpassung HT ±6 dB Raumanpassung TT ±6 dB *1 = long term IEC 265-8-Wrms / 10 min *2 = nominal IEC 265-8 = Peak Power 5 µsec *3 = pay attention to the selected voltage on the backside of the speaker Allgemeines Frequenzgang ± 3 d

  • Adam S2A, Version 06.2006 Deutsch/English S2A ADAM Audio GmbH Ederstr. 16 | 12059 Berlin-Germany phone: +49 30-863 00 97-0 fax: +49 30-863 00 97-7 email: [email protected] ADAM Audio USA 31312 Via Colinas Unit 108 | Westlake Village | CA, 91362 phone: +1 818-991 3800 fax: +1-818-991 3808 email: [email protected] www.adam-audio.com

Related Products and Documents (Speakers):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Philips PSC706 Technical specifications philips/psc706-1I7.pdf 03 Feb 2023 2 0.1 Mb
2 Yamaha D-80 Manual  yamaha/d-80-9I2.pdf 13 Aug 2023 40 4.94 Mb
3 COMPRO U500 - START UP GUIDE Manual  compro/u500-start-up-guide-D1H.pdf 02 Jul 2022 16 1.34 Mb
4 Autotek AT12D2 Instruction manual autotek/at12d2-955.pdf 25 Nov 2023 11 1.34 Mb
5 Xerox N24 Function manual xerox/n24-TBD.pdf 01 Dec 2023 15 0.05 Mb
6 RCA Lyra M200E256 Operation & user’s manual rca/lyra-m200e256-GYW.pdf 27 Mar 2024 48 1.26 Mb

Similar Resources:

  • Sanus Systems

    HTB7

    (10 pages)
    Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA • sanus.comAmericas: 800-359-5520 • 651-484-7988 • [email protected], Middle East, and Africa: 31 (0) 40 26 68 619 • [email protected] Asia Pacifi c: 86 755 8996 9226 • 800 999 6688 (mainland China only) • [email protected] ©2009 Milestone AV Technologies. All rights …
  • Toa

    BS-1034EN

    (8 pages)
    Thank you for purchasing TOA's Wall Mount Speaker. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.BS-1034ENWALL MOUNT SPEAKER INSTRUCTION MANUAL1. SAFETY PRECAUTIONS• Before installation or use, be sure to carefully read all the instructions in this section for correct and safeoperation.• B …
  • Ibiza sound

    PORT10DVD-VHF

    (7 pages)
    AACCTTIIVVEE PPOORRTTAABBLLEE PPAA SSYYSSTTEEMM WWIITTHH BBAATTTTEERRYY SSYYSSTTEEMMEE DDEE SSOONNOORRIISSAATTIIOONN PPOORRTTAABBLLEE AACCTTIIFF AAVVEECC BBAATTTTEERRIIEE AAKKTTIIVVEE,, TTRRAAGGBBAARREE BBEESSCCHHAALLLLUUNNGGSSAANNLLAAGGEE MMIITT BBAATTTTEERRIIEE SSIISSTTEEMMAA PPAA PPOORRTTAATTIILL AACCTTIIVVOO CCOOMM BBAATTE …
  • Philips

    SPA7210

    (2 pages)
    PhilipsMultimedia Speakers 2.0SPA7210Rock da bass!Feel the deep bass and crisp sounds from double drivers and a bass port. Connect to your notebook or MP3, enjoy music, games, movies and online videos or charge your MP3 and mobile phone - these speakers work with MAC and PC.Listen with pleasure• Feel the powerful punch of dramatic deep bass• Crisp, bala …
  • Panasonic

    SB-AFC500K

    (6 pages)
    Operating Instructions Model No. / Modèles SB-PF500SB-AFC500RQT6260-YSpeaker SystemBefore connecting, operating or adjusting this product, please readthese instructions completely.Please keep this manual for future reference.Il est recommandé de lire attentivement le présent manuel avantd’utiliser l’appareil.Conserver ce manuel.Manuel d’util …
  • Philips

    htl1193b

    (15 pages)
    Quick start guideRegister your product and get support atwww.philips.com/supportAlways there to help youQuestion?Contact PhilipsHTL1193BHTL1193B_98_QSG_V3.0.indd1 2016/7/1911:23:00 …

Comments, Questions and Opinions: