Defender Security 812BF Operation Manual

Text of Defender Security 812BF User Guide:

• Defender Security 812BF, Overview Features -1- The wireless SDR harddisk recorder is a general harddisk recorder launched for civil security market. Designed with such new technologies as wireless transmission, motion detection, and SD card recording. It is one of the most advanced harddisk recording systems on the market.Provided with such features as high integration, complete auxiliary products, ease of use, high security, and competitive price. It is an ideal choice for families, department stores, warehouses, parking lots, office building, and other places where the monitoring is required.In gene

• -2- Packing List Connection Diagram 2.4GHz Wireless Camera x 1 2.4GHz Wireless Receiver x 1 Antenna for Receiver x 1 Adapter for Receiver x 1 Adapter for Camera x 1 Video Cable x 2 Camera adapter Camera Receiver adapter Receiver Monitor/TV AV Output VCR * 812BF means GP-812T + GB7301

• Defender Security 812BF, Antenna Left Button Up Button OK Button Down Button Right Button Channel Switch Record Button Channel Indicator Power Indicator Automatic Detection /Recording Indicator Menu Button Play Button Receiver -4- Video Out Power ON/Off SD Card Slot Power Socket Video In

• Defender Security 812BF, -6- AV Cable 5. Connect the adapter for receiver to the receiver. 4. Connect the receiver to a monitor/TV with AV cable. 6. Please insert SD Card to SD Card Slot of receiver. Usable capacity:32M-2G 1G-2G recommended

• Defender Security 812BF, -7- 7. Push the power switch to ON position and the power indicator lights up. If the SD Card is inserted incorrectly or is not inserted, the monitor/TV will display SD Card not plug in , and only real-time monitoring is available at this time. Notes : * Make sure the protection switch on SD Card is turned on. * Never touch the metal part of the SD Card with bare hands for static electricity of human body may cause permanent damage to the SD Card. * Insert or pull out the SD Card only when the equipment is turned off. 8. Power on the monitor/TV and select AV mode. 9. Set the channel of recei

• Defender Security 812BF, -8- Press Channel Button continuously, the Channel Indicator lights up.If the Channel Indicator flashes once, the channel is channel 1. If the Channel Indicator flashes twice continuously, the channel is channel 2. If the Channel Indicator flashes three times continu- ously, the channel is channel 3. If the Channel Indicator flashes four times continuously, the channel is channel 4. Note: The focus of the camera was set clearly as default. 10. Adjust the brightness, contrast and color of the monitor/TV for the perfect effect. * This receiver also has a video input for wired camera connection as follow: Wired camera Video output

• Defender Security 812BF, Receiver Operation 1. Menu Key Operation You are recommended to press menu key to set before its first use. Monitor/AV displays picture as follows, Press <Left/Right> key to select and press OK key to enter setting. Date/Time set up: Press the <Left/Right> and <Up/Down> keys to set the date and time of the equipment. Motion Detect ON/OFF set up: Press OK key to change the setting. If you choose ON , the receiver can automatically record or capture photos when motion detected. If you choose OFF, the receiver is only in real-time monitoring status. Capture Format AV/Photo set up: Press the OK key to change the s

• Defender Security 812BF, Advanced setup: Picture displays as follows, Press <Left/Right> key to select and press OK key to enter setting. A. TV setup: Press OK key to choose PAL or NTSC. B. Quality setup: Press OK key to choose High or Low. High (high quality) is recommended. C. Motion Detect Area setup: Press OK key to enter the detection area modification window, and press the Left or Right key to modify the value. After pressing OK key, the system e- nters detection location modification windows. D. Motion Detect Count setup: Press OK key to select 1, 3 or 5 photos should be taken when motion detected. For exa- mple, if count 3 is selected, when motion detected, the rec

• Defender Security 812BF, 3. Play mode Press Play key to replay saved videos or pictures. Press play key again to enter the monitoring mode. After entering replay mode, Press Down directly to play a latest video or picture. After entering replay mode, Press Left/Right to select folder, and press Down to play. After entering replay mode, Press OK key to enter/exit the folder selection window, there are six-lattice mode every interface, Press Left/Right key to select file named with date and time, press D

• Defender Security 812BF, -13- Consumption Current(Max.) 160mA&250mA Intermediate Frequency Antenna 50 ohm SMA Video Output Signal Level Storage Media SD Card memory(max.) Power Supply Voltage SD Card 80 127 18(mm) 178g Received Sensitivity -85dBm Unobstructed Effective Range 100m 720 480 (NTSC); 720 576(PAL) ISM 2,400~2,483MHz ISM 2,400~2,483MHz Minimum Illumination Night Vision range 0 Lux 8VDC 5VDC 2mW/FCC,10wm/CE Dimensions(W D H) Consumption Current (Max.) 590mA Weight(About) CMOS 480MHz 1.1Vpp 0.1Vpp@75 ohm, 2G 812BF 7m 45 78 83 (mm) 217 g * Channel Frequency: CH1=2,414MHz; CH2=2,432MHz; CH3=2

• Defender Security 812BF, FCC INFORMATION This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. The graphics included are subject to minor change without notice. EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities

Related Products and Documents (Security System):

Comparable Devices:

Similar Resources:

• GE Interlogix Concord Security System (106 pages) )*(,QWHUORJL[S t a t u sF e a t u r e sp r e s s b o t hL i g h t sS y s t e mA w a yQ u i c k E x i tO f fN o D e l a yp r e s s b o t hp r e s s b o t hT e s t S y s t e m W e e k l yS i l e n tS t a yD*70 #8BA415623B y p a s sM e n uC9P r o g r a m U s e r S e t t i n g sp r e s s 0 - 9 f o r o t h e r e n t r i e s .P r e …

• Cooper Security 9940 (2 pages) 341 2 34 5 67 8 9 09940, 9941 and 9943 KeypadInstallation InstructionsIntroductionThe 9940, 9941 and 9943 keypads are designed to work with 9853, 9851, 9752, 9751 and 9651 alarm system control units. These keypads are a direct replacement for the 9930, and offers the advantage of smaller size and improved appearance.The 9940 and 9943 keypada have a proximity …

• NAPCO GEM-RP8LCD (8 pages) Page 1 INTRODUCTION The GEM-RP8LCD is a user-friendly, menu-driven digital keypad that is compatible with the NAPCO GEM-Series GEM-P800, P801, and P400 control-panels. Refer to User Guide OI276 for operation instructions. While the GEM-RP8 may be used to fully program any of the previous listed panels, the GEM-RP8LCD keypad provides the optimum in ease of …

• GeoVision GV-3D (16 pages) Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Quick Start GuideGV-3D People Counter V2 V1.013DPC2V101-QG-A …

• Orion SC242 (12 pages) INSTRUCTIONS FOR USEIMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULLY.18CM LCD DIGITAL VIDEO RECORDERWITH TWO DAY/NIGHT CAMERASSC24218cm COLOUR LCD SCREENWITH IN-BUILT DIGITAL VIDEO RECORDER AND REMOTE CONTROL18cmWIRELESSWIRELESS VIDEO SIGNAL TRANSMISSION WITH DIGITAL ENCRYPTION WITHOUT SIGNAL LOSSWIRELESSSURVEILLANCE SYSTEM50 METRESLONG TRANSMISSION RANGE …

• Vingtor Stentofon SPA-V2 (50 pages) TECHNICAL MANUAL A100K10369 v.4.0System ManualPUBLIC ADDRESS & GENERAL ALARM SYSTEMSPA-V2TALK+1 2345678 9 1011 12 13 14 15161718 19 20ALL BAUXDIM SIGNVOLUMELS zone 1CabinsLS zone 2LS zone 3LS zone 4Lifeboat areaPA microphone panelPA microphone & Alarm panelAlarm panelEntertainmentLS zone 5LS zone 6EngineareaOpen deckGENERALABANDONMANUALRESETEMSSPARES …

Comments, Questions and Opinions: