Carpal LX24 Operation & User’s Manual

Text of Carpal LX24 User Guide:

• Carpal LX24, CAR ALARM USER’S MANUAL GENERAL DESCRIPTION This car alarm system is designed to provide not only all essential preventative security features but also some user-convenience operations (such as trunk release, window-rolling up, lock/unlock doors, car finding) with ease of operation and dealer installable high security and convenience options using the most advanced technology. SYSTEM PACKAGE CONTENTS After you purchase this car alarm, please check whether all systems parts are packed. Please see the illustration table: 1. Mai

• TRANSMITTER BUTTON ILLUSTRATION 3-button transmitter: 4-button transmitter -- Button A -- Button B -- Button C -- Button D STANDARD FUNCTIONS AND FEATURES 1. TO ARM THE SYSTEM The alarm system can be activated by pressing button A on the transmitter after the vehicle is parked and doors are closed ( i

• Carpal LX24, 3 then press button A to arm the system (for 4-button transmitter) or press and hold button C for 3 seconds ( for 3-button transmitter). 6. AUTOMATIC RE-ARM If the system is disarmed via transmitter and any doors are not opened within approximately 25 seconds, the system will automatically re-arm itself. This feature guards against disarming caused by accidental or unintended operation of the remote transmitter. 7. AUTOMATIC ARMING ALERT .5 seconds after you turn off the ignition switch and exit the vehicle ( door is opened then closed), if you forget to ar

• Carpal LX24, 4 normal state, it is not pushed down. When it is pushed down in a necessary situation, the alarm anti-hijack function will be engaged. Finally it will immobilize the vehicle engine so it avoids the robbery. This is normally used when it is not convenient for the vehicle owner to use the remote control or the remote control is not with him when the dangerous robbery is happening or the owner is forced to get out of the vehicle, he can secretly get the alarm main unit and push down the green button before he leaves and remember to close the door well after he leaves the vehicle ( must remember to close the d

• Carpal LX24, 5 PROGRAMMABLE FUNCTION AND FEATURES 1. PASSIVE ARMING (LAST DOOR ARMING ) This feature is programmable. Factory setting is “without”. If set “with”, when ignition is off, the driver leaves the vehicle and closes doors well, 25 seconds after, the system will be armed automatically. (if set “with” this feature, then the previous AUTOMATIC ARMING ALERT feature will be invalid).This is to protect your vehicle in the event you forget to arm the system using the transmitter. You can choose whether you want to set “with” this feature according to your personal practice. To select “with” this feature, please see below PROGRAMMABLE OPER

• Carpal LX24, 6 be pull out straightly, don’t fold, cut short, or touch with other things. See Alarm System Wiring Diagram. 2. SHOCK SENSOR INSTALLATION After installing the main unit, mount the shock sensor under the dashboard and stick it closely to the inner wall of vehicle body without any shock pad. Please remember the position where the shock sensor is mounted. It will cause false alarm if it is too sensitive, or it will fail to alarm if it is too insensitive. The sensitivity of shock sensor can be adjusted moderately according to the environment and user’s demand to make it work reliably. There is a LED light and a small se

• 7 a. check if the actuators work. b. Check if the central locking system connection with car alarm is correct. c. Check if the fuse is burn out. 3. The car alarm siren doesn’t sound when the system is triggered. a. check if the siren is normal. b. Check if the connection between the siren and the car alarm main unit is correct. c. Check if it is i

• Carpal LX24, ALARM SYSTEM WIRING DIAGRAM JP1 Starter 1. power window 2. trunk release 3.door trigger (negative) 4.Engine immobilizing 5. Ignition On 1. Brown direction light 2. Brown direction light 3. Red power supply (+12V) 4. Green Door trigger ( positive) 5. Black Power supply (-) 6. Pink Siren 7. Orange 8. White 9. Yellow 10.Orange / black 11.white/ black 12. Yellow/ black Shock sensor Ultrasonic sensor 6. footbrake Special Anti-robbery Switch Reset Switch LED indicator Relay white ACC +12 V green ACC-ON Brake light Footbrake No.7-12 for Central door lock connection SCHEMAIC DIAGRAM FOR CENTRAL DOOR LOCK INNER INTERF

Related Products and Documents (Car Alarm):

Comparable Devices:

Similar Resources:

• Clifford Auto Immobilizer (4 pages) Owner’s ManualStandard Features✔Lifetime Warranty — This is one feature you may never use sinceClifford systems are renowned for their reliability. For as long as you ownthe vehicle, Clifford Electronics will repair or replace the control unit freeof charge.✔ A Pair of Tamper-Proof ComputerKeys™ — These electronic keys arethe world’s most secur …

• Ultra Start 640 Series (16 pages) INSTALL GUIDETechnical Support- 866.698.5872Rev. 2006.02FCC/ID NoticeThis device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:1. This device may not cause harmful interference, and2.This device must accept any interference received, including interference that may cause undesired operation.CAUTION: Changes or modi …

• Spyball 6527 (15 pages) Manuale di installazione AB6527EUSBB - inglese/francese/olandese - Rev. 00 - 06/04 - Pagina 1 di 15 Codice 06DE1824B 6527 Compact motorcycle security system Système de sécurité compact pour moto Compact motorfiets beveiligings systeem FITTING INSTRUCTIONS NOTICE DE MONTAGE MONTAGE INSTRUCTIE English Français Nederla …

• PUTHON 460HP (28 pages) 460HPInstallation Guide© 2002 Directed Electronics, Inc. Vista, CA N429P 4-02NOTE: This product is intended for installation by a professional installer only!Any attempt to install this product by any person other than a trained professionalmay result in severe damage to a vehicle’s electrical system and components. …

• Code Alarm CA611 (21 pages) 1CA 611 Installation InstructionsAvoid mounting components or routing wires nearhot surfacesAvoid mounting components or routing wires nearmoving partsTape or loom wires under hood for protection andappearanceUse grommets when routing wires through metalsurfacesUse a Digital Multi Meter for testing and verifyingcircuits. DO NOT USE A TEST LIGHT, OR"COM …

• Clifford AvantGuard 4 (24 pages) Standard Features of the AvantGuard 4System ComponentsOne prewired 24-pin connector One Extended Range Receiver One prewired 12-pin connector One LEDOne prewired 14-pin connector One PlainView 2 Coded Valet SwitchOne prewired 9-pin connector One Digital Tilt/Motion SensorOne AvantGuard 4 Control Unit One Warranty CardOne Self-Powered SmartSiren 4 One Owner …

Comments, Questions and Opinions: