Innovatek IN-403DTM Owner's Manual

Text of Innovatek IN-403DTM User Guide:

• OWNER's MANUAL Mobile Video System DETACHABLE PANEL 4 INCH IDE COLOR DIGITAL SCREEN TFT TV TUNER MOTORIZED SLIDE DOWN AND W CAR DVD/VCD/CD/MP3 PLAYER AM/FM- RDS DIGITAL PLL TUNING RADIO MPEG4 PLAYER USB CONNECT EON REL TA/AF MOD MU BND CH 1-6 CAR DVD/VCD/CD/MP3/MPEG4/TV PLAYER CLK PTY IN-403DTM MENU DVD/RECEIVER CONTROLDVD/RECEIVER CONTROL SETUP ENTER 1 2 3 4 5 6 7 8 9 0

• CONTENTS 1 Safety Information...................................................................................... Disc Notes ................................................................................................. Installation ................................................................................................. Panel Angle Adjustment ...................

• Innovatek IN-403DTM, 2 SAFETY INFORMATION CAUTION: WARNING: REGION MANAGEMENT INFORMATION: THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR E

• Innovatek IN-403DTM, DISC NOTES Preparing New Discs with Spots Rough A new disc may have rough edges on its inside and outside edges.If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc.Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right.To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc. Disc formats supported by this player Rough spots on outside edge Ball point pen or pencil Rough spots on inside edge Label sid

• Innovatek IN-403DTM, Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or modifications of the vehicle. Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop, like an emergency stop. If installation angle exceeds 30

• Innovatek IN-403DTM, INSTALLATION 5 If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration. DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER PLAIN WASHER TAPPING SCREW CONSOLE SLIDE BRACKET HOUSING HEX BOLT KEY PLATE KEY PLATE PLASTIC COVER

• Innovatek IN-403DTM, 6 INSTALLATION How To Remove And Install The Front Panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching The Front Panel Before detaching the control panel, be sure to turn off the power. 1). Press the release button and the left hand side of the front panel will release. (FIG. 1) 2). Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3) Attaching The Front Panel 1). First insert the right hand side of the front panel into the hollow of the unit . 2). Gently push the left hand side of the front pane

• Innovatek IN-403DTM, PANEL ANGLE ADJUSTMENT 7 Caution: Do not insert your finger behind the control panel. When you want to change the viewing angle of the operating unit to play, you can press the (angle)button repeatedly to select the desired angle as follows: CHANGING THE CONTROL PANEL ANGLE Angle 3 Angle 4 Angle 1 Angle 2

• Innovatek IN-403DTM, ELECTRIC CONNECTION WIRING CONNECTION 8 Note: the earth connection cable (parking brake B-) must be connected in order for DVD pictures to be played back to the monitor. If the cable has not been correctly connected, the message “PARKING BRAKE” appears on the monitor. VIDEO IN YELLOW RCH IN RED LCHINWHITE GREY SUBWOOFER VIDEO OUT 2 YELLOW COAXIAL OUT BROWN WHITE (B+)12V REAR CAMERA SWITCH GREEN YELLOW AUX(optional) RCA CABLE REAR CAMERA INPUT (B-)PARKING BRAKE FRONT RCA WHITE L RCH RED LCH WHITE FRONT RCA RED R VIDEO OUT 1 YELLOW REAR RCA OUTPUT CABLE (optional) FRONT RCA OUTPUT CABLE (FOR RCA LINE OUT VERSION O

• Innovatek IN-403DTM, REMOTE CONTROL 9 1.CLK 2.MODE 3.STOP 4.SETUP 5.MO/ST(AUDIO) 6. SUBTITLE LO/DX 7.REPEAT 8.GOTO 9. / 10.SEL 11. VOL+/VOL- 12. / / / 13.MENU SUB WOOFER 14.BAND(OSD) 15.POWER 16.PLAY/PAUSE 17.MUTE 18.TITLE/PBC (A/P) 19. 20.ANGLE 21.EQ 22.SEARCH 23.ENTER 24.SKIP 25. 0 - 9 26.+10 27. RADIO PRESET Press it briefly to show/hide the clock, press longer to set the time. Press it to change between TV, RADIO ,DISC and AUX IN mode. Press it to stop playback, press PLAY/PAUSE to resume playback . Press it to open the SETUP menu. In radio mode, press it to select STEREO or MONO mode (In disc mode, press it to changing of the AUDIO soundtrack on

• Innovatek IN-403DTM, REMOTE CONTROL 10 Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About 30 degree in each the direction of the front of the IR mark. Preparing the Remote Control 1.First push to inside as the direction indicated by the arrow (See )And then Remove the battery holder as the direction indicated by the arrow (See ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See ). 3.Insert the battery holder. Push in the holder

• Innovatek IN-403DTM, BASIC OPERATION 11 1.REL BUTTON Press the REL button to detach the removable front panel. Refer to see page 6 . 3-4.VOL+/VOL- & SEL BUTTON Press SEL 4 button briefly to across the sound/picture mode selection menu by repeatedly pressing the SEL button you can select the individual menu items such as volume, bass, treble, balance, fader, color, bright, contrast and tint . Then rotate the VOL + / - to adjust the selected mode. (The corresponding value will show on the display.) When mode has not been adjusted

• Innovatek IN-403DTM, BASIC OPERATION 12 6. TA/AF BUTTON TA Function [traffic Announcement] Button(for Rds Only) AF [Alternative Frequencies] In RADIO mode When swing the SEL knob briefly in the TA/AF direction, it is activated as TA mode ON or OFF. During radio operation in one FM frequency band the search for a traffic announ- cement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. If an FM station is being received which transmits the latest traffic announcements automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to

• Innovatek IN-403DTM, BASIC OPERATION 13 9. (ANGLE)BUTTON you can change the viewing angle of the operating unit . Press this button up to four times in order to select the desired position. 8. MU/PTY BUTTON PTY(PROGRAM TYPE) FUNCTION Press it button briefly to switch of the loudspeakers for a short period. The word MUTE flashes in the display. Press it again to cancel the mute function. This function can also be cancelled by using the VOL multifunction In RADIO mode : Press and hold for about 2 seconds to across the PTY function selection menu, press this button repeatedly, you can select the PTY type as bell

• Innovatek IN-403DTM, BASIC OPERATION 14 To wind through the tracks keep the SEL button pressed in the or direction for about 2 seconds. FF X2 appears in the display. Operating the SEL button again, the speed of rapid forward/reverse changes according to the disc as follow: DVD/VCD/CD/MP3: Normal Playback 2x 4x 8x 16x b) In Radio Mode: Move the SEL button in the direction of or in order to set a radio station manually. Keep the SEL taste pressed down in the or direction in order to start the search for a radio station automatically. 12. MOD BUTTON Press it repeatedly to select TV, AUX IN , RADIO and DISC mode. Dur

• Innovatek IN-403DTM, BASIC OPERATION 15 F. Long Press to play disc in random. In the DVD/VCD/CD/MP3 disc playing, press the 4/RDM button on the front panel to play in random (depend on the disc used for VCD). 4/(RDM) E.Long Press button to scan disc. a. In the state of CD disc playing, press the 3/INT button to play the previous 6 seconds part of each track/chapter on disc. b. In the state of Mp3 disc playing, the 3/INT button is not available. c. In the state of VCD disc playing , long press the 3/INT button, the screen will display as follow (long press it again will release this mode.): 3/(INT) SELECT DIGEST TYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL 1). you can use

• Innovatek IN-403DTM, BASIC OPERATION 16 To connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers. 1). Please connect the external device with stereo jack plug the Aux in socket(17). 2). Press the MOD button to select the AUX IN connection. 3). Rotate the VOL+/- to adjust the volume level. AUX Operation Scroll Caption Adjustment You can adjust your desired scroll caption , the method of the operation as follow: a). Press and hold the SETUP button (for about

• Innovatek IN-403DTM, 17 BASIC OPERATION Rear View Camera When connecting the rear view camera.the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position.(The monitor on the unit only.) if the parking brake is not engaged,“parking brake” flashes on the monitor, and no playback picture will be shown. Only the audio will be heard. -This warning appears only when the parking brake wire is connected to the parking brake system built in the car. (See page .8) NOTE(For The Brake Functi

• BASIC OPERATION 18 Press the OSD button during playback to display the contents of the current disc on the screen. A.Example for DVD: a.Press OSD for the first time: TITLE ELAPSED TT 01/01 CH 01/38 0:02:06 e.Press OSD for the fifth time: The message on the screen will be cleared. d.Press OSD for the fourth time: c.Press OSD for the third time: b.Press OSD for the second time: T

• Innovatek IN-403DTM, e.Press for the fifth time: The message on the screen will be cleared for SVCD and VCD. C.Example for MP3: Each time OSD is pressed, the message displayed on screen changes as follows: OSD SINGLE ELAPSED SINGLE REMAIN BASIC OPERATION 19 Multi-audio Language Function For DVD: AUDIOPress during playback. Each time the button is pressed, number of the audio soundtrack language changes on sequential order. NOTES: - The language number is different according to the disc. - Some disc only contain one language soundtrack - When no different language soundtrack are record

• SETUP 20 1.TV DISPLAY SETUP This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set. Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.) Played back in letterbox style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.) Select when a wide-screen TV set i

• Innovatek IN-403DTM, 3.OSD LANG TYPE SETUP Select the preferred OSD language by using the / buttons. 21 5.CAPTIONS SETUP Activate the CAPTIONS feature by selecting ON. And release this feat- ure by selecting OFF. 2.ANGLE MARK DISPLAY SETUP If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear. 4.SPDIF OUTPUT This is to activate the audio output from SPDIF OFF mode to SPDIF/RAW mode to SPDIF/PCM mode. Set Angle Mark -----General setup page---- Angle Mark Last Memory TV Display Spdif Output OSD Lang

• Innovatek IN-403DTM, 22 6.SCR SAVER SETUP Select the SCR SAVER output ON/OFF. 7.LAST MEMORY SETUP Select the LAST MEMORY output ON/OFF. SPEAKER SETUP --- SPEAKER SETUP PAGE --- This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Select the LT/RT to activate the Dolby surround compatible output. Select the STEREO to activate simple stereo mode. DOLBY DIGITAL SETUP DYNAMIC RANGE CONTROL Select DRC and adjust the dynamic range of a Doby Digital encode

• Innovatek IN-403DTM, --- PREFERENCES PAGE --- 23 PREFERENCES SETUP 1.TV TYPE SETUP This player can play discs recorded in either PAL or NTSC format.Select NTSC format, when you connected to NTSC TV.Select PAL format, when you connected to PAL TV.Select AUTO format, the player TV output format will according to the DVD disc format.. 2.AUDIO LANGUAGE SETUP Select the preferred AUDIO sound- track by using the cursor buttons. 3.SUBTITLE LANGUAGE SETUP Select the preferred SUBTITLE language by using the cursor buttons. 4.DISC MENU LANGUAGE SETUP Select the preferred DISC MENU language by using the cursor buttons. Set TV standard -----Preference Page---- Audio Default TV Type Password Disc Menu Subtitle Par

• 24 5.PARENTAL Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button. 6.PASSWORD Select the change and press ENTER button. Type the old password (The initial factory code is ) and key in 4 characters password now you want to use, and retype again to confirm key in correctly. 1379 7.DEFAULTS Select reset to become factory initial set

• Innovatek IN-403DTM, Supply Voltage: 12V DC (11V-15V) Current Consumption: Less than10 A Signal System: Compositive video 1.0Vp-p 75 Discs Played: (1)DVD-VIDEO Disc 5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer (2)Compact Disc (CD-DA, VIDEO CD) 5"(12cm) disc Audio Signal Output: 2ch&4ch line out Characteristics: (1)Frequency Response 20 Hz - 20 KHz (2)S/N Ratio 90 dB (JIS) (3)Wow and Flutter Below measurable limits For 3 Bands For 2 Bands For 2 Bands (Europe) (Europe) (U.S.A.) FM FM FM Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9

• Innovatek IN-403DTM, 888-J4003-06S Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. TROUBLE SHOOTING 26 Inserting the disc in reverse direction Press the RESET button. Front panel is not properly fixed into its place The car ignition switch is not on If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" The fuse is blown Replace the fuse Presence of disc inside the player.

Related Products and Documents (Car Video System):

Comparable Devices:

Similar Resources:

• Magnavox AE 6745 (2 pages) AE 6745- Portable RadioPOWER SUPPLYBatteries• Open the battery door and insert two 1.5 V batteries, typeR03, UM4 or AAA-cells, as indicated. Notes:• Store preset stations again after replacing the batteries.• Remove the batteries if they are dead or if the set is notgoing to be used for a long time.DISPLAYThe display provides youwith information on the …

• Jensen VX7023 (4 pages) What’s in the Box The following items are supplied with the VX7023:Tools and Supplies The following tools and supplies are needed to install the head unit:• Torx type, flat-head and Philipsscrewdrivers• Wire cutters and strippers• Tools to remove existing radio (screwdriver, socket wrench set or othertools)• Electrical tape• Crimping tool� …

• Pioneer DEH-2800 (72 pages) ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2005 DEH-2800MP …

• Sony XS-GTX121LB (1 pages) Subwoofer designThe XS-GTX121LB subwoofer uses a unique dimpled cone design to reduce cone weight and increase output levels. High energy magnetsThe XS-GTX121LB woofer uses a powerful, high energy Ferrite magnet to control cone travel and deliver big power handling. Power handlingThe XS-GTX121LB subwoofer is rated for 300 Watts, 420 Watts RMS (CEA 2031 rat …

• Chevrolet 2013 VOLT (106 pages) Black plate (1,1)Chevrolet VOLT Infotainment System - 2013 - crc - 5/16/122013 Chevrolet VOLT Infotainment System MInfotainment System . . . . . . 3Introduction . . . . . . . . . . . . . . . . . 3Infotainment . . . . . . . . . . . . . . . . . . . . 3Theft-Deterrent Feature . . . . . . . . 3Overview (With Navigation) . . . . 3Overview (WithoutNavigation) . . …

• JVC KD-X40 (2 pages) HeadunitsKD-X40Digital Media Receiver with USB and Dual AUXJVC’s digital media receiver features advanced integration with smartphones via USB, AUX, or Bluetooth® connection with an optional adapter. Enjoy iPod/iPhone music with 2-Way Control, as well as Pandora control on the headunit via 1A USB connection for smartphones. With Apps Control for iPod Mode …

Comments, Questions and Opinions: